By placing an atom into a cavity, the electromagnetic mode structure of the cavity is modified. In cavity QED, one manifestation of this phenomenon is the appearance of a gauge-dependent diamagnetic term, known as the ${A}^{2}$ contribution. Although in atomic cavity QED, the resulting modification in the eigenmodes is negligible, in recent superconducting circuit realizations, such corrections can be observable and may have qualitative implications. We revisit the canonical quantization procedure of a circuit-QED system consisting of a single superconducting transmon qubit coupled to a multimode superconducting microwave resonator. A complete derivation of the quantum Hamiltonian of an open circuit-QED system consisting of a transmon qubit coupled to a leaky transmission line cavity is presented. We introduce a complete set of modes that properly conserves the current in the entire structure and present a sum rule for the dipole transition matrix elements of a multilevel transmon qubit coupled to a multimode cavity. Finally, an effective multimode Rabi model is derived with coefficients that are given in terms of circuit parameters.
By placing an atom into a cavity, the electromagnetic mode structure of the cavity is modified. In cavity QED, one manifestation of this phenomenon is the appearance of a gauge-dependent diamagnetic term, known as the A2 contribution. Although in atomic cavity QED, the resulting modification in the eigenmodes is negligible, in recent superconducting circuit realizations, such corrections can be observable and may have qualitative implications. We revisit the canonical quantization procedure of a circuit-QED system consisting of a single superconducting transmon qubit coupled to a multimode superconducting microwave resonator. A complete derivation of the quantum Hamiltonian of an open circuit-QED system consisting of a transmon qubit coupled to a leaky transmission line cavity is presented. We introduce a complete set of modes that properly conserves the current in the entire structure and present a sum rule for the dipole transition matrix elements of a multilevel transmon qubit coupled to a multimode cavity. Finally, an effective multimode Rabi model is derived with coefficients that are given in terms of circuit parameters.
We present a Heisenberg-Langevin formalism to study the effective dynamics of a superconducting qubit coupled to an open multimode resonator, without resorting to the rotating wave, two level, Born or Markov approximations. Our effective equations are derived by eliminating resonator degrees of freedom while encoding their effect in the Green's function of the electromagnetic background. We account for the openness of the resonator exactly by employing a spectral representation for the Green's function in terms of a set of non-Hermitian modes. A well-behaved time domain perturbation theory is derived to systematically account for the nonlinearity of weakly nonlinear qubits like transmon. We apply this method to the problem of spontaneous emission, capturing accurately the non-Markovian features of the qubit dynamics, valid for any qubit-resonator coupling strength. Any discrete-level quantum system coupled to the electromagnetic continuum is subject to radiative decay and renormalization of its energy levels. When inside a cavity, these quantities can be strongly modified with respect to vacuum. Generally, this modification can be captured by including only the closest resonant cavity mode. In circuit-QED architecture, with substantial coupling strengths, it is however found that such rates are strongly influenced by far off-resonant modes. A multimode calculation over the infinite set of cavity modes leads to divergences unless an artificial cutoff is imposed. Previous studies have not pointed out what the source of this divergence is. We show that unless the effect of A2 is accounted for up to all orders exactly, any multimode calculations of circuit-QED quantities is bound to diverge. Subsequently, we present the calculation of finite radiative corrections to qubit properties that is free of an artificially introduced high frequency cut-off.
In cavity quantum electrodynamics (QED), the key physical systems include Fabry-Pérot cavity resonators and multilevel cold atoms. Since ultra-strong electromagnetic interaction between photons and quantized cavity modes occurs in cavity QED, many novel quantum optical effects such as optical Rabi oscillation, quantum collapse/revival of atomic-level population and atom-field quantum entanglement can be realized in such quantum microcavities. As is known in quantum optics, these schemes can be generalized to circuit QED, which is a circuit analog of cavity QED. Fundamental devices in circuit QED are superconducting coplanar waveguide microwave resonators and mesoscopic Cooper-pair boxes. Here, the coplanar waveguide resonator with photons stored can be identified as a resonant cavity and the Cooper-pair boxes with large electric dipoles play the role of multilevel cold atoms. Thus, all the quantum optical effects in conventional cavity QED can also be exhibited in the present superconducting circuit QED system. We consider the theoretical working mechanism of superconducting charge qubits based on tunable Josephson junction coupling. It can be found that an analog of optical Rabi oscillation in Cooper-pair boxes can be achieved by tuning an applied external magnetic field. Time evolution of energy levels in a Cooper-pair box, which is manipulated by a time-dependent magnetic flux through its Josephson-junction ring, is studied within the framework of time-dependent quantum mechanics.
Multimode cavity-QED systems can be leveraged to explore a wide range of physical phenomena; however, a complex multimode environment makes systematic characterization of light-matter interactions challenging. Here we present a general measurement protocol, applicable to both atomic and synthetic cavity-QED systems, that enables the determination of coupling to individual photonic modes. The method leverages measurements of the AC-Stark and Kerr effects, along with known detuning dependencies, to eliminate the need for single-photon resolution, independent photon-number calibration, or insertion-loss calibration. We demonstrate the method using a superconducting transmon qubit coupled to a one-dimensional microwave resonator lattice. We validate the consistency of the extracted light-matter couplings g determined at multiple qubit detunings, and from the self-Kerr and cross-Kerr shifts for three photon modes, which provide separate measurements of g for each of the three modes.
Circuit quantum electrodynamics (QED) studies the interaction of artificial atoms, open transmission lines, and electromagnetic resonators fabricated from superconducting electronics. While the theory of an artificial atom coupled to one mode of a resonator is well studied, considering multiple modes leads to divergences which are not well understood. Here, we introduce a first-principles model of a multimode resonator coupled to a Josephson junction atom. Studying the model in the absence of any cutoff, in which the coupling rate to mode number n scales as n for n up to $\ensuremath{\infty}$, we find that quantities such as the Lamb shift do not diverge due to a natural rescaling of the bare atomic parameters that arises directly from the circuit analysis. Introducing a cutoff in the coupling from a nonzero capacitance of the Josephson junction, we provide a physical interpretation of the decoupling of higher modes in the context of circuit analysis. In addition to explaining the convergence of the quantum Rabi model with no cutoff, our work also provides a useful framework for analyzing the ultrastrong coupling regime of a multimode circuit QED.
Waveguide circuit quantum electrodynamics (waveguide circuit QED) studies light-matter interaction with superconducting circuits in one dimension. In circuit QED, natural atoms are replaced by superconducting qubits consisting of a non-linear Josephson junction, resulting in an anharmonic energy spectrum just like real atoms. With superconducting qubits, it is possible to study quantum optical phenomena and reach new regimes hard to achieve with real atoms due to weak coupling to the electromagnetic field. The reduction to one dimension in waveguide QED increases the electromagnetic field's directionality, which results in reduced losses. In this thesis, we first introduce circuit quantisation, giving the basis for the next part, where we investigate a transmon, a charge-insensitive artificial atom, coupled to a semi-infinite transmission line. An atom coupled to a semi-infinite waveguide is referred to as an atom in front of a mirror and is the subject of all appended papers. We proceed by summarising Paper I and III's main results: in Paper I, we investigate the spontaneous emission of a transmon coupled to a semi-infinite transmission line, where we take time-delay effects into account. We find that the system dynamics strongly depend on the coupling strength to the transmission line and the atom's position with respect to the electromagnetic field, leading to the Purcell effect or the convergence to a dark state with finite excitation probability. In the high-impedance regime, which we investigate in Paper III, the properties of the transmon coupled to the high-impedance transmission line change drastically. It becomes highly reflective and creates its own cavity with the mirror, resulting in the emergence of cavity modes and vacuum Rabi oscillations in the spontaneous emission dynamics. In the next chapter of the thesis, we demonstrate how to quantise an electromagnetic field and derive a light-matter interaction Hamiltonian within dipole approximation. We then give an introduction to open quantum systems and derive the quantum-optical master equation in Lindblad form. Furthermore, we introduce the dressed state picture, where the interaction of light and matter is so strong that the individual energy levels of light and matter are no longer separable. Both the quantum optical master equation and the dressed state picture are relevant in Paper II and IV. In Paper II, an experimental collaboration, we perform several experiments to characterise and discriminate different decay rates of a superconducting qubit coupled to the end of a transmission line. One experiment measured the atomic fluorescence spectral density, which shows an asymmetry for off-resonant driving, resulting from pure dephasing: an effect that we explain in more detail in this thesis and Paper II. In Paper IV, we theoretically investigate amplification mechanisms realised by different set-ups of an atom coupled to a semi-infinite waveguide. In the considered systems, the amplification of a probe field happens either due to population inversion between the pure states or dressed states or multi-photon processes. We find that compared to an open waveguide, we can achieve a higher gain in the amplification with a semi-infinite waveguide.
Artificially engineered atoms, built using superconducting electrical circuits, have had a broad impact on the field of quantum information and quantum computing. Based on the Josephson effect, superconducting qubits have provided a robust platform for engineering light-matter interactions at the single-photon level. The ability to precisely control and manipulate single photons using superconducting qubits and cavities, a field now popularly known as circuit quantum electrodynamics (circuit QED), has enabled new and novel regimes in quantum physics, which previously remained inaccessible. For instance, the coupling between individual photons and artificial atoms have been shown to reach the ultrastrong and deep-strong regimes, a feat which is difficult to achieve with natural atoms. The superconducting circuit platform is now a promising contender for building large-scale quantum processors, attracting large investments from academic, industry and government players. \n \nThis thesis uses superconducting circuits to engineer photon interactions in two separate studies. The first is aimed at studying the physics of ``giant" artificial-atoms. The second study explores the route towards building a quantum heat engine using two parametrically-coupled, superconducting microwave cavities. We review the theoretical ideas and concepts which motivate our work, along with discussions of the design methodology, simulations, fabrication, measurement setup and the experimental findings. \n \nIn the first study, we explore a giant artificial atom, formed from a transmon qubit, which is coupled to propagating microwaves at multiple points along an open transmission line. The multipoint coupling nature of the transmon allows its radiated field to interfere with itself leading to some striking ``giant" atom effects. For instance, we observe strong frequency dependent couplings of the transmon's transition levels to its electromagnetic environment, a feature which is not observed with ordinary artificial atoms. We measure large on/off ratios, as high as 380, for the coupling rate of the ket0−ket1 transition. Furthermore, we show that we can enhance or suppress the coupling rate of the ket1−ket2 transition relative to the ket0−ket1 transition, by more than a factor of 200. The relative modulation of the coupling rates was exploited to engineer a metastable state in the giant transmon and demonstrate electromagnetically-induced transparency (EIT), a typical signature of a lambda system. Our results show that we can transform the ladder structure of an ordinary transmon into a more interesting lambda system using a giant transmon, thereby paving the way for exploring new possibilities to study three-level physics in a waveguide-QED setting. \n \nExtending giant atom physics to multiple giant atoms, we then explore a device with two giant artificial atoms connected in a braided configuration to a transmission line. The braided topology of the qubits, offers an interesting regime where the qubits can interact with each other in a decoherence-free environment, where the interaction is mediated by virtual photons in the transmission line. We probe the resonant behavior of the qubits at two different frequency bias points, where we observe qualitatively different scattering behavior. Furthermore, when probing for the Autler-Townes Splitting (ATS), multiple resonances are observed for both resonant and off-resonant cases instead of the familiar doublet in the ATS spectroscopy. This comes as a surprise as the frequency-level spacings in both qubits are nominally identical. We believe these features could be an indication of a novel resonant interaction between the qubits facilitated by the braided topology. An effort to understand this theoretically is underway. \n \nFor our second study, we explore a system with two parametrically-coupled superconducting resonators, which implements an optomechanical-like interaction in an all-electrical network. The nonlinear nature of this interaction is mediated by a superconducting quantum interference device (SQUID), where the current in one resonator couples to the photon number in the other resonator. We propose to use this system to build a ``photonic piston" engine in the quantum regime. We motivate the feasibility of the proposal by reviewing key theoretical results which demonstrate an Otto-cycle by appropriately driving the system with noise. Our experimental findings demonstrate the crucial nonlinear coupling that is required for the engine to work. We also show that we can increase the coupling strength between the resonators depending on the chosen flux operating point.