Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1505.03591 · Physical Review A

Enhanced trapping of cold Li6 using multiple-sideband cooling in a two-dimensional magneto-optical trap

Kai Li, Dongfang Zhang, Tianyou Gao, Shi-Guo Peng, Kaijun Jiang

Published Jul 22, 2015• 11 citations
arXivHTMLPDF

Abstract

Trapping a large number of $^{6}\mathrm{Li}$ atoms in a simplified experimental setup is a long-term pursuit in the studies of degenerate Fermi gases. We experimentally and theoretically demonstrate the enhancement of $^{6}\mathrm{Li}$ trapping efficiency in a three-dimensional magneto-optical trap (3D MOT) by using the multiple-sideband cooling in a two-dimensional magneto-optical trap (2D MOT). In the 2D MOT, we increase the spectral width of the cooling light to 102 MHz by generating six frequency sidebands in order to couple fast atoms. The capture velocity is dramatically increased by employing the multiple-sideband cooling. The number of trapped atoms in the 3D MOT is $6.0\ifmmode\times\else\texttimes\fi{}{10}^{8}$, which is higher by a factor of 4 than in the case of single-frequency cooling. We have investigated the dependence of atom number on laser detuning, and our experimental result agrees well with the prediction of a simple two-level model. The efficiency of the multiple-sideband cooling for lithium (in contrast to many other alkali-metal atoms) is also confirmed by the analysis of the loss due to fine-structure changing collisions.

DOI
10.1103/physreva.92.013419

Related papers

Sideband-Enhanced Cold Atomic Source for Optical Clocks

Matteo Barbiero, Marco G. Tarallo, Davide Calonico +3 more

We demonstrate the enhancement and optimization of a cold strontium atomic beam from a two-dimensional magneto-optical trap (2D MOT) transversely loaded from a collimated atomic beam by adding a sideband frequency to the cooling laser. The parameters of the cooling and sideband beams are scanned to achieve the maximum atomic beam flux and are compared with Monte Carlo simulations. We obtain a 2.3 times larger total atomic flux and a brightness increase of a factor 4 compared with a conventional, single-frequency 2D MOT for a given total power of 200 mW. We show that the sideband-enhanced 2D MOT can reach the loading-rate performances of space-demanding Zeeman-slower-based systems, while it can overcome systematic effects due to thermal-beam collisions and hot-black-body-radiation shift, making it suitable for both transportable and accurate optical lattice clocks. Finally, we numerically study possible extensions of the sideband-enhanced 2D MOT to other alkaline-earth species.

arXiv:1909.05810•Physical Review Applied•Jan 9, 2020•47 citations

High efficient Raman sideband cooling and strong three-body recombination of atoms

Yuqing 玉清 Li 李, Zhennan 震南 Liu 刘, Yunfei 云飞 Wang 王 +7 more

We report a highly efficient three-dimensional degenerated Raman sideband cooling (3D dRSC) that enhances the loading of a magnetically levitated optical dipole trap, and observe the strong atom loss due to the three-body recombination. The 3D dRSC is implemented to obtain 5 × 107 Cs atoms with the temperature of ∼ 480 nK. The cold temperature enables 1.8 × 107 atoms loaded into a crossed dipole trap with an optimized excessive levitation magnetic gradient. Compared to the loading of atoms from a bare magneto-optical trap or the gray-molasses cooling, there is a significant increase in the number of atoms loaded into the optical dipole trap. We derive for the three-body recombination coefficient of L 3 = 7.73 × 10−25 cm6/s by analyzing the strong atom loss at a large scattering length of 1418 Bohr radius, and discover the transition from the strong three-body loss to the dominant one-body loss. Our result indicates that the lifetime of atoms in the optical dipole trap is finally decided by the one-body loss after the initial strong three-body loss.

Chinese Physics B•Aug 1, 2023•2 citations

Enhanced Raman sideband cooling of caesium atoms in a vapour-loaded magneto-optical trap

Y. Li, Jizhou Wu, G Feng +6 more

Abstract We report enhanced three-dimensional degenerated Raman sideband cooling (3D DRSC) of caesium (Cs) atoms in a standard single-cell vapour-loaded magneto-optical trap. Our improved scheme involves using a separate repumping laser and optimized lattice detuning. We load 1.5 × 10 7 atoms into the Raman lattice with a detuning of −15.5 GHz (to the ground F = 3 state). Enhanced 3D DRSC is used to cool them from 60 µ K to 1.7 µ K within 12 ms and the number of obtained atoms is about 1.2 × 10 7 . A theoretical model is proposed to simulate the measured number of trapped atoms. The result shows good agreement with the experimental data. The technique paves the way for loading a large number of ultracold Cs atoms into a crossed dipole trap and efficient evaporative cooling in a single-cell system.

arXiv:1503.05952•Laser Physics Letters•Mar 31, 2015•12 citations

Enhanced Atom Capture via Multi-Frequency Magneto-Optical Trapping

Benjamin Hopton, Alexander Abbey, David Johnson +6 more

Magneto-optical traps are central to atomic and molecular quantum technologies and precision tests of fundamental physics, where both sensitivity and bandwidth scale strongly with atom number and loading rate. We demonstrate that employing multiple, closely spaced optical frequency components in the cooling light of a $^{87}$Rb magneto-optical trap -- without utilizing any additional slowing techniques -- can double the steady state atom number and increase the loading rate by up to a factor of 4, compared to a conventional single-frequency implementation. Subsequently, we capture up to $1.0(1)\times10^{10}$ atoms with a loading rate of up to $1.3(2)\times 10^{11}\,\mathrm{atoms\,s^{-1}}$ from a thermal background. Numerical simulations reproduce the observed trends and predict substantially larger gains for increased trap sizes beyond our experimental bounds. By re-examining earlier studies of multi-frequency atom capture in the context of modern experimental hardware and emerging applications, we show that previously identified limitations can be avoided and establish multi-frequency cooling as a practical and scalable route to high-flux cold-atom sources. These results have immediate applications in portable atom-based quantum sensing, where higher bandwidth and precision can be achieved without forgoing compactness, and in atom-interferometric tests of fundamental physics, which benefit from access to larger-mass quantum systems.

physics.atom-phCross-listedarXiv:2604.23221•Apr 28, 2026•0 citations

Enhanced cold mercury atom production with two-dimensional magneto-optical trap

Ye Zhang, Qixin Liu, Jianfang Sun +2 more

A cold atom source is important for quantum metrology and precision measurement. To reduce the quantum projection noise limit in optical lattice clock, one can increase the number of cold atoms and reduce the dead time by enhancing the loading rate. In this work, we realize an enhanced cold mercury atom source based on a two-dimensional (2D) magneto-optical trap (MOT). The vacuum system is composed of two titanium chambers connected with a differential pumping tube. Two stable cooling laser systems are adopted for the 2D-MOT and the three-dimensional (3D)-MOT, respectively. Using an optimized 2D-MOT and push beam, about 1.3×106 atoms, which are almost an order of magnitude higher than using a pure 3D-MOT, are loaded into the 3D-MOT for 202Hg atoms. This enhanced cold mercury atom source is helpful in increasing the frequency stability of a neutral mercury lattice clock.

Chinese Physics B•Feb 10, 2022•7 citations

Enhanced production of 199Hg cold atoms based on two-dimensional magneto-optical trap

Ze-Xin Yu, Qixin Liu, Jianfang Sun +1 more

Efficient preparation of cold atoms plays an important role in realizing precision measurement including optical lattice clocks (OLCs). Fast preparation of cold atoms reduces Dick noise by shortening dead time in a clock interrogation cycle, which improves the stability of OLCs. Here, we increase the loading rate of the three-dimensional magneto-optical trap (3D-MOT) in the ultra-high vacuum environment by utilizing the two-dimensional magneto-optical trap (2D-MOT) with a push beam, reduce the temperature of cold atoms with the compression-MOT technique which is implemented by reducing the detuning of 3D-MOT rapidly at the end of atom preparation, and realize the enhanced production of cold atoms for 199Hg OLCs. To achieve 3D-MOT and 2D-MOT of mercury atoms, a deep ultraviolet laser (DUVL) system composed of three DUVLs is developed with one working in lower power for frequency locking and the other two in high power for laser cooling. Such a configuration improves the long-term frequency stability and shows greater robustness than our previous system consisting of two DUVLs. To maximize the 3D-MOT loading rate, we orderly optimize the detuning and the magnetic field gradient of 3D-MOT and those of 2D-MOT as well as the detuning and the power of the push beam. After all parameters are optimized, we measure the maximum loading rate of 3D-MOT to be 3.1×105 s–1 and prepare cold atoms of 1.8×106 in 9 s. The loading rate is greatly enhanced by a factor of 51 by using 2D-MOT and the push beam. In order to improve the efficiency of transferring cold atoms from 3D-MOT to optical lattice, we use compression-MOT technique to reduce the temperature of cold atoms and produce cold 199Hg atoms which are about 45 μK, lower than the expected temperature of Doppler cooling theory. By achieving the high gain of the 3D-MOT loading rate under the ultra-high vacuum and reducing the temperature of cold atoms, this enhanced preparation of cold atoms based on 2D-MOT effectively shortens the preparation time of cold atoms and improves the transfer efficiency of optical lattice, which provides a significant scheme for efficiently preparing cold mercury atoms in other experiments.

Acta Physica Sinica•Oct 9, 2023•2 citations
Trapping a large number of 6Li^{6}\mathrm{Li}6Li atoms in a simplified experimental setup is a long-term pursuit in the studies of degenerate Fermi gases. We experimentally and theoretically demonstrate the enhancement of 6Li^{6}\mathrm{Li}6Li trapping efficiency in a three-dimensional magneto-optical trap (3D MOT) by using the multiple-sideband cooling in a two-dimensional magneto-optical trap (2D MOT). In the 2D MOT, we increase the spectral width of the cooling light to 102 MHz by generating six frequency sidebands in order to couple fast atoms. The capture velocity is dramatically increased by employing the multiple-sideband cooling. The number of trapped atoms in the 3D MOT is 6.0\ifmmode×\else\texttimes\fi1086.0\ifmmode\times\else\texttimes\fi{}{10}^{8}6.0\ifmmode×\else\texttimes\fi108, which is higher by a factor of 4 than in the case of single-frequency cooling. We have investigated the dependence of atom number on laser detuning, and our experimental result agrees well with the prediction of a simple two-level model. The efficiency of the multiple-sideband cooling for lithium (in contrast to many other alkali-metal atoms) is also confirmed by the analysis of the loss due to fine-structure changing collisions.
We demonstrate the enhancement and optimization of a cold strontium atomic beam from a two-dimensional magneto-optical trap (2D MOT) transversely loaded from a collimated atomic beam by adding a sideband frequency to the cooling laser. The parameters of the cooling and sideband beams are scanned to achieve the maximum atomic beam flux and are compared with Monte Carlo simulations. We obtain a 2.3 times larger total atomic flux and a brightness increase of a factor 4 compared with a conventional, single-frequency 2D MOT for a given total power of 200 mW. We show that the sideband-enhanced 2D MOT can reach the loading-rate performances of space-demanding Zeeman-slower-based systems, while it can overcome systematic effects due to thermal-beam collisions and hot-black-body-radiation shift, making it suitable for both transportable and accurate optical lattice clocks. Finally, we numerically study possible extensions of the sideband-enhanced 2D MOT to other alkaline-earth species.
We report a highly efficient three-dimensional degenerated Raman sideband cooling (3D dRSC) that enhances the loading of a magnetically levitated optical dipole trap, and observe the strong atom loss due to the three-body recombination. The 3D dRSC is implemented to obtain 5 × 107 Cs atoms with the temperature of ∼ 480 nK. The cold temperature enables 1.8 × 107 atoms loaded into a crossed dipole trap with an optimized excessive levitation magnetic gradient. Compared to the loading of atoms from a bare magneto-optical trap or the gray-molasses cooling, there is a significant increase in the number of atoms loaded into the optical dipole trap. We derive for the three-body recombination coefficient of L 3 = 7.73 × 10−25 cm6/s by analyzing the strong atom loss at a large scattering length of 1418 Bohr radius, and discover the transition from the strong three-body loss to the dominant one-body loss. Our result indicates that the lifetime of atoms in the optical dipole trap is finally decided by the one-body loss after the initial strong three-body loss.
Abstract We report enhanced three-dimensional degenerated Raman sideband cooling (3D DRSC) of caesium (Cs) atoms in a standard single-cell vapour-loaded magneto-optical trap. Our improved scheme involves using a separate repumping laser and optimized lattice detuning. We load 1.5 × 10 7 atoms into the Raman lattice with a detuning of −15.5 GHz (to the ground F = 3 state). Enhanced 3D DRSC is used to cool them from 60 µ K to 1.7 µ K within 12 ms and the number of obtained atoms is about 1.2 × 10 7 . A theoretical model is proposed to simulate the measured number of trapped atoms. The result shows good agreement with the experimental data. The technique paves the way for loading a large number of ultracold Cs atoms into a crossed dipole trap and efficient evaporative cooling in a single-cell system.
Magneto-optical traps are central to atomic and molecular quantum technologies and precision tests of fundamental physics, where both sensitivity and bandwidth scale strongly with atom number and loading rate. We demonstrate that employing multiple, closely spaced optical frequency components in the cooling light of a 87^{87}87Rb magneto-optical trap -- without utilizing any additional slowing techniques -- can double the steady state atom number and increase the loading rate by up to a factor of 4, compared to a conventional single-frequency implementation. Subsequently, we capture up to 1.0(1)×10101.0(1)\times10^{10}1.0(1)×1010 atoms with a loading rate of up to 1.3(2)×1011 atoms s−11.3(2)\times 10^{11}\,\mathrm{atoms\,s^{-1}}1.3(2)×1011atomss−1 from a thermal background. Numerical simulations reproduce the observed trends and predict substantially larger gains for increased trap sizes beyond our experimental bounds. By re-examining earlier studies of multi-frequency atom capture in the context of modern experimental hardware and emerging applications, we show that previously identified limitations can be avoided and establish multi-frequency cooling as a practical and scalable route to high-flux cold-atom sources. These results have immediate applications in portable atom-based quantum sensing, where higher bandwidth and precision can be achieved without forgoing compactness, and in atom-interferometric tests of fundamental physics, which benefit from access to larger-mass quantum systems.
A cold atom source is important for quantum metrology and precision measurement. To reduce the quantum projection noise limit in optical lattice clock, one can increase the number of cold atoms and reduce the dead time by enhancing the loading rate. In this work, we realize an enhanced cold mercury atom source based on a two-dimensional (2D) magneto-optical trap (MOT). The vacuum system is composed of two titanium chambers connected with a differential pumping tube. Two stable cooling laser systems are adopted for the 2D-MOT and the three-dimensional (3D)-MOT, respectively. Using an optimized 2D-MOT and push beam, about 1.3×106 atoms, which are almost an order of magnitude higher than using a pure 3D-MOT, are loaded into the 3D-MOT for 202Hg atoms. This enhanced cold mercury atom source is helpful in increasing the frequency stability of a neutral mercury lattice clock.
Efficient preparation of cold atoms plays an important role in realizing precision measurement including optical lattice clocks (OLCs). Fast preparation of cold atoms reduces Dick noise by shortening dead time in a clock interrogation cycle, which improves the stability of OLCs. Here, we increase the loading rate of the three-dimensional magneto-optical trap (3D-MOT) in the ultra-high vacuum environment by utilizing the two-dimensional magneto-optical trap (2D-MOT) with a push beam, reduce the temperature of cold atoms with the compression-MOT technique which is implemented by reducing the detuning of 3D-MOT rapidly at the end of atom preparation, and realize the enhanced production of cold atoms for 199Hg OLCs. To achieve 3D-MOT and 2D-MOT of mercury atoms, a deep ultraviolet laser (DUVL) system composed of three DUVLs is developed with one working in lower power for frequency locking and the other two in high power for laser cooling. Such a configuration improves the long-term frequency stability and shows greater robustness than our previous system consisting of two DUVLs. To maximize the 3D-MOT loading rate, we orderly optimize the detuning and the magnetic field gradient of 3D-MOT and those of 2D-MOT as well as the detuning and the power of the push beam. After all parameters are optimized, we measure the maximum loading rate of 3D-MOT to be 3.1×105 s–1 and prepare cold atoms of 1.8×106 in 9 s. The loading rate is greatly enhanced by a factor of 51 by using 2D-MOT and the push beam. In order to improve the efficiency of transferring cold atoms from 3D-MOT to optical lattice, we use compression-MOT technique to reduce the temperature of cold atoms and produce cold 199Hg atoms which are about 45 μK, lower than the expected temperature of Doppler cooling theory. By achieving the high gain of the 3D-MOT loading rate under the ultra-high vacuum and reducing the temperature of cold atoms, this enhanced preparation of cold atoms based on 2D-MOT effectively shortens the preparation time of cold atoms and improves the transfer efficiency of optical lattice, which provides a significant scheme for efficiently preparing cold mercury atoms in other experiments.