Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1504.02527 · Physical Review A

Atom-interferometric measurement of Stark level splittings

Limei Wang, Hao Zhang, Linjie Zhang, Georg A. Raithel, Jianming Zhao, Suotang Jia

Published Sep 21, 2015• 7 citations
arXivHTMLPDF

Abstract

Mixed adiabatic and diabatic passages through avoided crossings in the Stark map of cesium Rydberg atoms are employed as beam splitters and recombiners in an atom-interferometric measurement of energy-level splittings. We subject cold cesium atoms to laser-excitation, electric-field, and detection sequences that constitute an (internal-state) atom interferometer. The adiabatic state transformation in the interferometer's beam splitters enables the spectroscopy of states that are, due to selection rules, inaccessible to direct laser-spectroscopic observation. For the read-out of the interferometer we utilize state-dependent collisions, which selectively remove atoms of one kind from the detected signal. We investigate the dependence of the interferometric signal on timing and field parameters, and find good agreement with quantum simulations of the interferometer. Fourier analysis of the interferometric signals yield coherence frequencies that agree with corresponding energy-level differences in calculated Stark maps.

DOI
10.1103/physreva.92.033619

Related papers

Doppler-free Stark spectroscopy of the second excited level of atomic hydrogen for measurements of electric fields

M. Gemisic Adamov, Andreas Steiger, Klaus Grutzmacher +1 more

The Stark splitting of the second excited level of atomic hydrogen (with principal quantum number $n=3$) has been measured by pulsed laser spectroscopy in order to determine small electric fields by optical means. Doppler-free excitation with two counterpropagating laser beams at $205\phantom{\rule{0.3em}{0ex}}\mathrm{nm}$ allows us to measure the $n=3$ Stark spectra either by an optogalvanic signal after ionization by a third laser photon or by detection of the Balmer-$\ensuremath{\alpha}$ fluorescence photons emitted by the excited atoms. Three different cases of laser polarization have been investigated in order to evaluate the possibilities and limitations of this one-step laser excitation method for electric field determination, especially at field strengths below $200\phantom{\rule{0.3em}{0ex}}\mathrm{V}∕\mathrm{cm}$. The method provides the best field sensitivity achieved with lower excited levels that can be reached directly by two-photon absorption from the ground state (in contrast to the more sensitive Rydberg levels). For this purpose, an advanced tunable pulsed uv laser with narrow bandwidth almost at the Fourier limit has been used. The high spectral resolution allowed us to deduce electric field strengths as small as $50\phantom{\rule{0.3em}{0ex}}\mathrm{V}∕\mathrm{cm}$ from the frequency shift between two selected isolated Stark components. As a main advantage, this simple analysis of the measured spectra does not rely on knowledge of the line intensities which may be strongly affected by the measuring conditions.

Physical Review A•Jan 11, 2007•15 citations

Matter-wave interferometry with helium atoms in low- l Rydberg states

J. D. R. Tommey, S. D. Hogan

Electric Rydberg-atom interferometry has been performed with helium atoms in coherent superpositions of the $1s56s\phantom{\rule{0.16em}{0ex}}^{3}S_{1}$ and $1s57s\phantom{\rule{0.16em}{0ex}}^{3}S_{1}$ Rydberg levels. The experiments were carried out in a longitudinal geometry with the atoms traveling at 2000 m/s in pulsed supersonic beams. After laser photoexcitation from the $1s2s\phantom{\rule{0.16em}{0ex}}^{3}S_{1}$ metastable level, coherent manipulation of the population of the Rydberg states was achieved using sequences of microwave pulses. The difference in the static electric dipole polarizabilities of the $1s56s\phantom{\rule{0.16em}{0ex}}^{3}S_{1}$ and $1s57s\phantom{\rule{0.16em}{0ex}}^{3}S_{1}$ levels allowed superpositions of external momentum states to be generated when inhomogeneous electric fields were used to exerted forces on the atoms prepared in superpositions of these internal states. Interference fringes, with contributions arising from the spatial separation of these Rydberg-atom wave packets in the direction of propagation of the atomic beam, were identified through changes in the internal-state populations as the magnitudes and durations of the time-dependent electric-field gradient pulses were adjusted. The maximal displacement of the atomic wave packets for which interference fringes were observed was $\ensuremath{\sim}0.75\phantom{\rule{0.28em}{0ex}}\mathrm{nm}$, limited by the longitudinal velocity spread in the atomic beam and the characteristics of the inhomogeneous electric-field distribution in the apparatus. The experimental data are in good quantitative agreement with the results of numerical calculations of the time evolution of the atomic states under the experimental conditions.

Physical Review A•Sep 3, 2021•8 citations

Stark spectroscopy of Rydberg atoms in an atom-ion hybrid trap

Shinsuke Haze, Joschka Wolf, Markus Deiß +3 more

We report on Rydberg spectroscopy of ultracold atoms in an atom-ion hybrid trap for probing the electric fields in a mixture of atoms and ions. We obtain spectra which exhibit excitation gaps corresponding to avoided level crossings in the Stark map. From these measurements we can conclude that the ground state atoms experience electrical fields of up to 250 V/cm. There is, however, a difficulty in interpreting the results, because some data indicate that the electrical fields are produced by the ions while other data indicate that they stem from the Paul trap. We discuss possible scenarios for explaining the measured data, provide first measurements to check these scenarios, and propose methods to finally solve this puzzle.

arXiv:1901.11069•Jan 30, 2019•14 citations

Rydberg-Atom Interferometry

James Palmer

Matter-wave interferometry has many possible uses, ranging from tests of funda- mental physics to applications in sensing. In order to achieve this interferometry, quantum superpositions of spatially-separated components need to be generated. There are several possible methods to accomplish this using Rydberg atoms; this thesis presents the experimental investigation of two of these. Both of these methods use inhomogeneous electric fields to spatially split beams of Rydberg atoms. In the first method, field distributions were generated above two-dimensional electrode structures and used to transversely split beams of helium Rydberg atoms into pairs of components spatially separated by up to 15.6 mm. Effects of amplitude modulation of the electric fields of this beam splitter were shown to cause particle losses through transitions into unconfined Rydberg-Stark states. This led to further studies of the depolarisation of Rydberg-Stark states in radio-frequency electric fields. Through this work it is shown that both ‘resonant’ and ‘non-resonant’ broadband modulation with amplitudes on the order of 10 mV·cm⁻¹ are sufficient to cause significant depolarisation of initially prepared quantum states on a timescale of 5 μs in a static offset electric field of 0.43 V·cm⁻¹. In a second class of experiments, matter-wave interferometry has been per- formed with helium atoms in high Rydberg states. In this work a series of mi- crowave and electric field gradient pulses were used to create a spatial separation between two components of a coherent superposition of states, while ensuring that the momenta of these components were equal at the end of the process to enable matter-wave interference to be observed. For the Rydberg states used, the spatial extent of the Rydberg electron wavefunction was ∼ 320 nm and displacements of up to 150 pm were observed between the pairs of matter-wave components at the end of the interferometry sequences.

•Mar 28, 2020•0 citations

Dipolar Rydberg-atom gas prepared by adiabatic passage through an avoided crossing

Limei Wang, Hao Zhang, Linjie Zhang +5 more

The passage of cold cesium 49S Rydberg atoms through an electric-field-induced multi-level avoided crossing with nearby hydrogen-like Rydberg levels is employed to prepare a cold, dipolar Rydberg atom gas. When the electric field is ramped through the avoided crossing on time scales on the order of 100 ns or slower, the 49S population adiabatically transitions into high- l Rydberg Stark states. The adiabatic state transformation results in a cold gas of Rydberg atoms with large electric dipole moments. After a waiting time of about 1 μ s and at sufficient atom density, the adiabatically transformed highly dipolar atoms become undetectable, enabling us to discern adiabatic from diabatic passage behavior through the avoided crossing. We attribute the state-selectivity to m -mixing collisions between the dipolar atoms. The data interpretation is supported by numerical simulations of the passage dynamics and of binary m -mixing collisions.

arXiv:1504.00518•New Journal of Physics•Jun 10, 2015•13 citations

Cesium Rydberg states ionization study by 3-D ion-electron correlation

Raphaël Hahn, Azer Trimeche, C. Lopez +2 more

We study the excitation and ionization of cesium Rydberg states in an electric field (∼ 2200 V/cm) near the classical field ionization threshold (∼ −280 cm −1 binding energy at this field) by 3-D ionelectron coincidence spectroscopy. Cesium atoms are produced by an effusive oven and excited with lasers to Stark-shifted Rydberg states or directly ionised. Using a double Time of Flight setup we record 3-D (X, Y, Time of Flight) coincidence imaging of cesium produced electrons and ions. Above-threshold photo-ionisation creates broad images with poor electron/ion-coordinates correlation. Depending on the coupling of particular Rydberg states to the continuum, various images and correlations are observed. Fast ionising states show very good correlations and reveal the electric field lines, creating an efficient electric field mapping of the ionisation region. Slow ionising states show that the relatively high atomic velocity is detrimental to the correlations. Experimental data are accurately reproduced by detailed Monte Carlo excitation and ionization simulations based on Stark maps obtained with local-frame transformation (LFT) theory. Spectroscopic LFT agreement is usually very good with better that hundreds of MHz accuracy but on particular states several GHz discrepancy is found. The study can be used to select appropriate states for the creation of ion and electron beams with high brightness, good correlation and low energy dispersion, as well as to provide a detailed analysis of LFT-theory shortcomings.

•Nov 23, 2020•0 citations
Mixed adiabatic and diabatic passages through avoided crossings in the Stark map of cesium Rydberg atoms are employed as beam splitters and recombiners in an atom-interferometric measurement of energy-level splittings. We subject cold cesium atoms to laser-excitation, electric-field, and detection sequences that constitute an (internal-state) atom interferometer. The adiabatic state transformation in the interferometer's beam splitters enables the spectroscopy of states that are, due to selection rules, inaccessible to direct laser-spectroscopic observation. For the read-out of the interferometer we utilize state-dependent collisions, which selectively remove atoms of one kind from the detected signal. We investigate the dependence of the interferometric signal on timing and field parameters, and find good agreement with quantum simulations of the interferometer. Fourier analysis of the interferometric signals yield coherence frequencies that agree with corresponding energy-level differences in calculated Stark maps.
The Stark splitting of the second excited level of atomic hydrogen (with principal quantum number n=3n=3n=3) has been measured by pulsed laser spectroscopy in order to determine small electric fields by optical means. Doppler-free excitation with two counterpropagating laser beams at 205nm205\phantom{\rule{0.3em}{0ex}}\mathrm{nm}205nm allows us to measure the n=3n=3n=3 Stark spectra either by an optogalvanic signal after ionization by a third laser photon or by detection of the Balmer-$\ensuremath{\alpha}$ fluorescence photons emitted by the excited atoms. Three different cases of laser polarization have been investigated in order to evaluate the possibilities and limitations of this one-step laser excitation method for electric field determination, especially at field strengths below 200V∕cm200\phantom{\rule{0.3em}{0ex}}\mathrm{V}∕\mathrm{cm}200V∕cm. The method provides the best field sensitivity achieved with lower excited levels that can be reached directly by two-photon absorption from the ground state (in contrast to the more sensitive Rydberg levels). For this purpose, an advanced tunable pulsed uv laser with narrow bandwidth almost at the Fourier limit has been used. The high spectral resolution allowed us to deduce electric field strengths as small as 50V∕cm50\phantom{\rule{0.3em}{0ex}}\mathrm{V}∕\mathrm{cm}50V∕cm from the frequency shift between two selected isolated Stark components. As a main advantage, this simple analysis of the measured spectra does not rely on knowledge of the line intensities which may be strongly affected by the measuring conditions.
Electric Rydberg-atom interferometry has been performed with helium atoms in coherent superpositions of the 1s56s3S11s56s\phantom{\rule{0.16em}{0ex}}^{3}S_{1}1s56s3S1​ and 1s57s3S11s57s\phantom{\rule{0.16em}{0ex}}^{3}S_{1}1s57s3S1​ Rydberg levels. The experiments were carried out in a longitudinal geometry with the atoms traveling at 2000 m/s in pulsed supersonic beams. After laser photoexcitation from the 1s2s3S11s2s\phantom{\rule{0.16em}{0ex}}^{3}S_{1}1s2s3S1​ metastable level, coherent manipulation of the population of the Rydberg states was achieved using sequences of microwave pulses. The difference in the static electric dipole polarizabilities of the 1s56s3S11s56s\phantom{\rule{0.16em}{0ex}}^{3}S_{1}1s56s3S1​ and 1s57s3S11s57s\phantom{\rule{0.16em}{0ex}}^{3}S_{1}1s57s3S1​ levels allowed superpositions of external momentum states to be generated when inhomogeneous electric fields were used to exerted forces on the atoms prepared in superpositions of these internal states. Interference fringes, with contributions arising from the spatial separation of these Rydberg-atom wave packets in the direction of propagation of the atomic beam, were identified through changes in the internal-state populations as the magnitudes and durations of the time-dependent electric-field gradient pulses were adjusted. The maximal displacement of the atomic wave packets for which interference fringes were observed was $\ensuremath{\sim}0.75\phantom{\rule{0.28em}{0ex}}\mathrm{nm}$, limited by the longitudinal velocity spread in the atomic beam and the characteristics of the inhomogeneous electric-field distribution in the apparatus. The experimental data are in good quantitative agreement with the results of numerical calculations of the time evolution of the atomic states under the experimental conditions.
We report on Rydberg spectroscopy of ultracold atoms in an atom-ion hybrid trap for probing the electric fields in a mixture of atoms and ions. We obtain spectra which exhibit excitation gaps corresponding to avoided level crossings in the Stark map. From these measurements we can conclude that the ground state atoms experience electrical fields of up to 250 V/cm. There is, however, a difficulty in interpreting the results, because some data indicate that the electrical fields are produced by the ions while other data indicate that they stem from the Paul trap. We discuss possible scenarios for explaining the measured data, provide first measurements to check these scenarios, and propose methods to finally solve this puzzle.
Matter-wave interferometry has many possible uses, ranging from tests of funda- mental physics to applications in sensing. In order to achieve this interferometry, quantum superpositions of spatially-separated components need to be generated. There are several possible methods to accomplish this using Rydberg atoms; this thesis presents the experimental investigation of two of these. Both of these methods use inhomogeneous electric fields to spatially split beams of Rydberg atoms. In the first method, field distributions were generated above two-dimensional electrode structures and used to transversely split beams of helium Rydberg atoms into pairs of components spatially separated by up to 15.6 mm. Effects of amplitude modulation of the electric fields of this beam splitter were shown to cause particle losses through transitions into unconfined Rydberg-Stark states. This led to further studies of the depolarisation of Rydberg-Stark states in radio-frequency electric fields. Through this work it is shown that both ‘resonant’ and ‘non-resonant’ broadband modulation with amplitudes on the order of 10 mV·cm⁻¹ are sufficient to cause significant depolarisation of initially prepared quantum states on a timescale of 5 μs in a static offset electric field of 0.43 V·cm⁻¹. In a second class of experiments, matter-wave interferometry has been per- formed with helium atoms in high Rydberg states. In this work a series of mi- crowave and electric field gradient pulses were used to create a spatial separation between two components of a coherent superposition of states, while ensuring that the momenta of these components were equal at the end of the process to enable matter-wave interference to be observed. For the Rydberg states used, the spatial extent of the Rydberg electron wavefunction was ∼ 320 nm and displacements of up to 150 pm were observed between the pairs of matter-wave components at the end of the interferometry sequences.
The passage of cold cesium 49S Rydberg atoms through an electric-field-induced multi-level avoided crossing with nearby hydrogen-like Rydberg levels is employed to prepare a cold, dipolar Rydberg atom gas. When the electric field is ramped through the avoided crossing on time scales on the order of 100 ns or slower, the 49S population adiabatically transitions into high- l Rydberg Stark states. The adiabatic state transformation results in a cold gas of Rydberg atoms with large electric dipole moments. After a waiting time of about 1 μ s and at sufficient atom density, the adiabatically transformed highly dipolar atoms become undetectable, enabling us to discern adiabatic from diabatic passage behavior through the avoided crossing. We attribute the state-selectivity to m -mixing collisions between the dipolar atoms. The data interpretation is supported by numerical simulations of the passage dynamics and of binary m -mixing collisions.
We study the excitation and ionization of cesium Rydberg states in an electric field (∼ 2200 V/cm) near the classical field ionization threshold (∼ −280 cm −1 binding energy at this field) by 3-D ionelectron coincidence spectroscopy. Cesium atoms are produced by an effusive oven and excited with lasers to Stark-shifted Rydberg states or directly ionised. Using a double Time of Flight setup we record 3-D (X, Y, Time of Flight) coincidence imaging of cesium produced electrons and ions. Above-threshold photo-ionisation creates broad images with poor electron/ion-coordinates correlation. Depending on the coupling of particular Rydberg states to the continuum, various images and correlations are observed. Fast ionising states show very good correlations and reveal the electric field lines, creating an efficient electric field mapping of the ionisation region. Slow ionising states show that the relatively high atomic velocity is detrimental to the correlations. Experimental data are accurately reproduced by detailed Monte Carlo excitation and ionization simulations based on Stark maps obtained with local-frame transformation (LFT) theory. Spectroscopic LFT agreement is usually very good with better that hundreds of MHz accuracy but on particular states several GHz discrepancy is found. The study can be used to select appropriate states for the creation of ion and electron beams with high brightness, good correlation and low energy dispersion, as well as to provide a detailed analysis of LFT-theory shortcomings.