Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1503.07484 · Physical Review A

Adiabatic elimination of Gaussian subsystems from quantum dynamics under continuous measurement

Ondřej Černotík, Denis V. Vasilyev, Klemens Hammerer

Published Jul 27, 2015• 20 citations
arXivHTMLPDF

Abstract

An ever broader range of physical platforms provides the possibility to study and engineer quantum dynamics under continuous measurements. In many experimental arrangements the system of interest is monitored by means of an ancillary device, whose sole purpose is to transduce the signal from the system to the measurement apparatus. Here we present a method of adiabatic elimination when the transducer consists of an arbitrary number of bosonic modes with Gaussian dynamics while the measured object can be any quantum system. Crucially, our approach can cope with the highly relevant case of finite temperature of the transducer, which is not easily achieved with other methods. We show that this approach provides a significant improvement in the readout of superconducting qubits in circuit QED already for a few thermal excitations and makes it possible to adiabatically eliminate optomechanical transducers relevant for frequency conversion between microwave and optical fields.

DOI
10.1103/physreva.92.012124

Related papers

Quantum Transduction with Adaptive Control

Mengzhen Zhang, Chang‐Ling Zou, Liang Jiang

Quantum transducers play a crucial role in hybrid quantum networks. A good quantum transducer can faithfully convert quantum signals from one mode to another with minimum decoherence. Most investigations of quantum transduction are based on the protocol of direct mode conversion. However, the direct protocol requires the matching condition, which in practice is not always feasible. Here we propose an adaptive protocol for quantum transducers, which can convert quantum signals without requiring the matching condition. The adaptive protocol only consists of Gaussian operations, feasible in various physical platforms. Moreover, we show that the adaptive protocol can be robust against imperfections associated with finite squeezing, thermal noise, and homodyne detection, and it can be implemented to realize quantum state transfer between microwave and optical modes.

arXiv:1706.06075•Physical Review Letters•Jan 9, 2018•30 citations

Spatially Adiabatic Frequency Conversion in Optoelectromechanical Arrays

Ondřej Černotík, Sahand Mahmoodian, Klemens Hammerer

Faithful conversion of quantum signals between microwave and optical frequency domains is crucial for building quantum networks based on superconducting circuits. Optoelectromechanical systems, in which microwave and optical cavity modes are coupled to a common mechanical oscillator, are a promising route towards this goal. In these systems, efficient, low-noise conversion is possible using a mechanically dark mode of the fields, but the conversion bandwidth is limited to a fraction of the cavity linewidth. Here, we show that an array of optoelectromechanical transducers can overcome this limitation and reach a bandwidth that is larger than the cavity linewidth. The coupling rates are varied in space throughout the array so that the mechanically dark mode of the propagating fields adiabatically changes from microwave to optical or vice versa. This strategy also leads to significantly reduced thermal noise with the collective optomechanical cooperativity being the relevant figure of merit. Finally, we demonstrate that the bandwidth enhancement is, surprisingly, largest for small arrays; this feature makes our scheme particularly attractive for state-of-the-art experimental setups.

arXiv:1707.03339•Physical Review Letters•Sep 14, 2018•30 citations

Elimination of Thermomechanical Noise in Piezoelectric Optomechanical Crystals

Hugh Ramp, Bradley D. Hauer, Krishna C. Balram +3 more

Mechanical modes are a potentially useful resource for quantum information applications, such as quantum-level wavelength transducers, due to their ability to interact with electromagnetic radiation across the spectrum. A significant challenge for wavelength transducers is thermomechanical noise in the mechanical mode, which pollutes the transduced signal with thermal states. In this Letter, we eliminate thermomechanical noise in the GHz-frequency mechanical breathing mode of a piezoelectric optomechanical crystal using cryogenic cooling in a dilution refrigerator. We optically measure an average thermal occupancy of the mechanical mode of only 0.7±0.4 phonons, providing a path towards low-noise microwave-to-optical conversion in the quantum regime.

arXiv:1812.09417•Physical Review Letters•Aug 30, 2019•32 citations

Novel approaches to optomechanical transduction

Ondřej Černotík

Faithful conversion of quantum signals between microwave and optical frequencies is crucial for building quantum networks based on superconducting circuits and for detection of weak microwave signals.A promising route towards this task uses transducers based on mechanical oscillators, which interact with light via radiation pressure and with microwave fields by electrostatic forces.Existing theoretical proposals and experimental efforts focus on two avenues towards optomechanical transduction: time-independent schemes for conversion of propagating fields or state transfer via adiabatic passage.The former approach results in simple experimental setups but its applicability is limited by narrow conversion bandwidth.The latter strategy avoids this problem; nevertheless, this gain requires complex time-dependent control schemes and strong opto-and electromechanical coupling, which is out of reach for current systems.In an ideal optomechanical transducer, we would like to combine the advantages of both strategies, namely large bandwidth and simple, time-independent control.In this dissertation, I tackle this challenge and develop two schemes for quantum networking of superconducting circuits based on two different tactics.In the first case, the transducer is optimized for a specific task: generation of entanglement between two superconducting qubits.I show how two established experimental techniques-parity measurements on superconducting qubits and optomechanical force sensing-can be combined to create a conceptually simple device, in which entanglement between the qubits is generated by measurement and postselection.Second, I demonstrate that an array of optomechanical transducers is capable of converting arbitrary input signals within a large bandwidth.The conversion process is based on adiabatic passage but, unlike existing proposals, uses spatial (and not temporal) variation of the system parameters.This approach does not require strong coupling and significantly reduces added noise.Together, these two protocols pave the way to future quantum networks with superconducting systems.The scheme for entanglement generation can be implemented with current experimental technology and is well suited for proof of principle experiments.Large quantum networks with many nodes will, on the other hand, require transducers capable of reaching high communication rates.This goal can be achieved with the large bandwidth of optoelectromechanical arrays.

Bulletin of the American Physical Society•Jan 1, 2017•1 citation

Quantum Control and Measurement in Circuit Electrodynamics and Circuit Optomechanics

Jiahe Pan

Circuit quantum electrodynamics (cQED), exemplified by a coupled system of a superconducting qubit and a microwave cavity, is a powerful framework for the quantum control and measurement of macroscopic quantum states in solid-state circuits. Quantum circuits based on superconducting qubits have emerged as one of the leading platforms in the pursuit of fault-tolerant quantum computing. Despite significant progress in extending qubit lifetimes, refining experimental protocols, and scaling up quantum processors, errors arising from the control and measurement of superconducting qubits continue to hinder the realization of a universal quantum computer. To investigate the error mechanisms for state-of-the-art qubits, we realize long-lived superconducting transmon qubits that exhibit fluctuating lifetimes, with an average of 0.2 ms and a maximum exceeding 0.4 ms. We then investigate their dominant error mechanism. By introducing novel time-resolved error measurements that are synchronized with the operation of the pulse tube cooler in a dilution refrigerator, we find that mechanical vibrations from the pulse tube induce nonequilibrium dynamics in highly coherent qubits, leading to their correlated bit-flip errors. Our findings not only deepen our understanding of qubit error mechanisms but also provide valuable insights into potential error-mitigation strategies for achieving fault tolerance by decoupling superconducting qubits from their mechanical environments. We also present a novel scheme for operating a cQED system in a regime where the cavity is largely displaced. We find that a qubit drive at the bare cavity frequency can effectively displace the cavity field while minimizing the cavity-drive-induced dephasing and the ac Stark shift. Furthermore, we demonstrate that standard cQED protocols, such as qubit control, readout, and cavity single-photon generation, remain compatible with largely displaced cavity fields, even beyond the critical photon number. These findings open new pathways for exploring cQED dynamics in large-photon-number regimes, including the study of nonlinear phenomena in microwave cavities, the saturation of two-level system baths for extending the coherence of microwave quantum states, and the acceleration of the dispersive readout. Finally, mechanical resonators have emerged as integral components in quantum computing for storing and transducing quantum information. Low-frequency mechanical resonators, with extremely low energy dissipation rates, are particularly interesting for extending the lifetimes of stored quantum information. However, integrating low-frequency mechanical resonators with qubits is challenging because their small energy gaps make coherent energy exchange and ground-state preparation difficult. In this thesis, we report the first steps towards the characterization of a hybrid quantum device, consisting of a Transmon qubit and a circuit optomechanical system, both coupled to a 3D microwave cavity.

•Jan 1, 2026•0 citations

On the schemes of cavity photon elimination in circuit-quantum electrodynamics systems

Meng Jian-Yu, Wang Pei-Yue, Feng Wei +2 more

The solid-state superconducting circuit-QED (quantum electrodynamics) system is a promising candidate for quantum computing and quantum information processing, which serves also as an ideal platform for quantum measurement and quantum control studies. In this context, a large number of cavity photons may be involved in the quantum dynamics and will degrade the simulation efficiency. To avoid this difficulty, it is helpful to eliminate the degrees of freedom of the cavity photons, and obtain an effective master-equation description which contains only the qubit states. In this work, we examine two such schemes, the adiabatic elimination (AE) and the more recently proposed polaron transformation (PT) approaches, by comparing their results with exact numerical simulations. We find that in the absence of qubit-flip, which is a specific quantum nondemolition (QND) measurement, the PT scheme is superior to the AE method. Actually, in this case the PT scheme catches the measurement dynamics exactly. However, in the presence of qubit-flip such as for qubit oscillation measurement, the PT scheme is no longer better than the AE approach. We conclude that both schemes, in the weak measurement regime, can work almost equally well. This corresponds to strong cavity damping or weak coupling between the qubit and cavity photons. Out of this regime, unfortunately, one has to include the cavity photons into numerical simulations and more advanced methods/techniques are waiting for their exploration in this field.

Acta Physica Sinica•Jan 1, 2012•0 citations
An ever broader range of physical platforms provides the possibility to study and engineer quantum dynamics under continuous measurements. In many experimental arrangements the system of interest is monitored by means of an ancillary device, whose sole purpose is to transduce the signal from the system to the measurement apparatus. Here we present a method of adiabatic elimination when the transducer consists of an arbitrary number of bosonic modes with Gaussian dynamics while the measured object can be any quantum system. Crucially, our approach can cope with the highly relevant case of finite temperature of the transducer, which is not easily achieved with other methods. We show that this approach provides a significant improvement in the readout of superconducting qubits in circuit QED already for a few thermal excitations and makes it possible to adiabatically eliminate optomechanical transducers relevant for frequency conversion between microwave and optical fields.
Quantum transducers play a crucial role in hybrid quantum networks. A good quantum transducer can faithfully convert quantum signals from one mode to another with minimum decoherence. Most investigations of quantum transduction are based on the protocol of direct mode conversion. However, the direct protocol requires the matching condition, which in practice is not always feasible. Here we propose an adaptive protocol for quantum transducers, which can convert quantum signals without requiring the matching condition. The adaptive protocol only consists of Gaussian operations, feasible in various physical platforms. Moreover, we show that the adaptive protocol can be robust against imperfections associated with finite squeezing, thermal noise, and homodyne detection, and it can be implemented to realize quantum state transfer between microwave and optical modes.
Faithful conversion of quantum signals between microwave and optical frequency domains is crucial for building quantum networks based on superconducting circuits. Optoelectromechanical systems, in which microwave and optical cavity modes are coupled to a common mechanical oscillator, are a promising route towards this goal. In these systems, efficient, low-noise conversion is possible using a mechanically dark mode of the fields, but the conversion bandwidth is limited to a fraction of the cavity linewidth. Here, we show that an array of optoelectromechanical transducers can overcome this limitation and reach a bandwidth that is larger than the cavity linewidth. The coupling rates are varied in space throughout the array so that the mechanically dark mode of the propagating fields adiabatically changes from microwave to optical or vice versa. This strategy also leads to significantly reduced thermal noise with the collective optomechanical cooperativity being the relevant figure of merit. Finally, we demonstrate that the bandwidth enhancement is, surprisingly, largest for small arrays; this feature makes our scheme particularly attractive for state-of-the-art experimental setups.
Mechanical modes are a potentially useful resource for quantum information applications, such as quantum-level wavelength transducers, due to their ability to interact with electromagnetic radiation across the spectrum. A significant challenge for wavelength transducers is thermomechanical noise in the mechanical mode, which pollutes the transduced signal with thermal states. In this Letter, we eliminate thermomechanical noise in the GHz-frequency mechanical breathing mode of a piezoelectric optomechanical crystal using cryogenic cooling in a dilution refrigerator. We optically measure an average thermal occupancy of the mechanical mode of only 0.7±0.4 phonons, providing a path towards low-noise microwave-to-optical conversion in the quantum regime.
Faithful conversion of quantum signals between microwave and optical frequencies is crucial for building quantum networks based on superconducting circuits and for detection of weak microwave signals.A promising route towards this task uses transducers based on mechanical oscillators, which interact with light via radiation pressure and with microwave fields by electrostatic forces.Existing theoretical proposals and experimental efforts focus on two avenues towards optomechanical transduction: time-independent schemes for conversion of propagating fields or state transfer via adiabatic passage.The former approach results in simple experimental setups but its applicability is limited by narrow conversion bandwidth.The latter strategy avoids this problem; nevertheless, this gain requires complex time-dependent control schemes and strong opto-and electromechanical coupling, which is out of reach for current systems.In an ideal optomechanical transducer, we would like to combine the advantages of both strategies, namely large bandwidth and simple, time-independent control.In this dissertation, I tackle this challenge and develop two schemes for quantum networking of superconducting circuits based on two different tactics.In the first case, the transducer is optimized for a specific task: generation of entanglement between two superconducting qubits.I show how two established experimental techniques-parity measurements on superconducting qubits and optomechanical force sensing-can be combined to create a conceptually simple device, in which entanglement between the qubits is generated by measurement and postselection.Second, I demonstrate that an array of optomechanical transducers is capable of converting arbitrary input signals within a large bandwidth.The conversion process is based on adiabatic passage but, unlike existing proposals, uses spatial (and not temporal) variation of the system parameters.This approach does not require strong coupling and significantly reduces added noise.Together, these two protocols pave the way to future quantum networks with superconducting systems.The scheme for entanglement generation can be implemented with current experimental technology and is well suited for proof of principle experiments.Large quantum networks with many nodes will, on the other hand, require transducers capable of reaching high communication rates.This goal can be achieved with the large bandwidth of optoelectromechanical arrays.
Circuit quantum electrodynamics (cQED), exemplified by a coupled system of a superconducting qubit and a microwave cavity, is a powerful framework for the quantum control and measurement of macroscopic quantum states in solid-state circuits. Quantum circuits based on superconducting qubits have emerged as one of the leading platforms in the pursuit of fault-tolerant quantum computing. Despite significant progress in extending qubit lifetimes, refining experimental protocols, and scaling up quantum processors, errors arising from the control and measurement of superconducting qubits continue to hinder the realization of a universal quantum computer. To investigate the error mechanisms for state-of-the-art qubits, we realize long-lived superconducting transmon qubits that exhibit fluctuating lifetimes, with an average of 0.2 ms and a maximum exceeding 0.4 ms. We then investigate their dominant error mechanism. By introducing novel time-resolved error measurements that are synchronized with the operation of the pulse tube cooler in a dilution refrigerator, we find that mechanical vibrations from the pulse tube induce nonequilibrium dynamics in highly coherent qubits, leading to their correlated bit-flip errors. Our findings not only deepen our understanding of qubit error mechanisms but also provide valuable insights into potential error-mitigation strategies for achieving fault tolerance by decoupling superconducting qubits from their mechanical environments. We also present a novel scheme for operating a cQED system in a regime where the cavity is largely displaced. We find that a qubit drive at the bare cavity frequency can effectively displace the cavity field while minimizing the cavity-drive-induced dephasing and the ac Stark shift. Furthermore, we demonstrate that standard cQED protocols, such as qubit control, readout, and cavity single-photon generation, remain compatible with largely displaced cavity fields, even beyond the critical photon number. These findings open new pathways for exploring cQED dynamics in large-photon-number regimes, including the study of nonlinear phenomena in microwave cavities, the saturation of two-level system baths for extending the coherence of microwave quantum states, and the acceleration of the dispersive readout. Finally, mechanical resonators have emerged as integral components in quantum computing for storing and transducing quantum information. Low-frequency mechanical resonators, with extremely low energy dissipation rates, are particularly interesting for extending the lifetimes of stored quantum information. However, integrating low-frequency mechanical resonators with qubits is challenging because their small energy gaps make coherent energy exchange and ground-state preparation difficult. In this thesis, we report the first steps towards the characterization of a hybrid quantum device, consisting of a Transmon qubit and a circuit optomechanical system, both coupled to a 3D microwave cavity.
The solid-state superconducting circuit-QED (quantum electrodynamics) system is a promising candidate for quantum computing and quantum information processing, which serves also as an ideal platform for quantum measurement and quantum control studies. In this context, a large number of cavity photons may be involved in the quantum dynamics and will degrade the simulation efficiency. To avoid this difficulty, it is helpful to eliminate the degrees of freedom of the cavity photons, and obtain an effective master-equation description which contains only the qubit states. In this work, we examine two such schemes, the adiabatic elimination (AE) and the more recently proposed polaron transformation (PT) approaches, by comparing their results with exact numerical simulations. We find that in the absence of qubit-flip, which is a specific quantum nondemolition (QND) measurement, the PT scheme is superior to the AE method. Actually, in this case the PT scheme catches the measurement dynamics exactly. However, in the presence of qubit-flip such as for qubit oscillation measurement, the PT scheme is no longer better than the AE approach. We conclude that both schemes, in the weak measurement regime, can work almost equally well. This corresponds to strong cavity damping or weak coupling between the qubit and cavity photons. Out of this regime, unfortunately, one has to include the cavity photons into numerical simulations and more advanced methods/techniques are waiting for their exploration in this field.