Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1502.04082 · Applied Physics Letters

Reducing intrinsic loss in superconducting resonators by surface treatment and deep etching of silicon substrates

Alessandro Bruno, G. de Lange, Serwan Asaad, Kian L. van der Enden, Nathan K. Langford, L. DiCarlo

Published May 4, 2015• 254 citations
arXivHTMLPDF

Abstract

We present microwave-frequency NbTiN resonators on silicon, systematically achieving internal quality factors above 1 M in the quantum regime. We use two techniques to reduce losses associated with two-level systems: an additional substrate surface treatment prior to NbTiN deposition to optimize the metal-substrate interface and deep reactive-ion etching of the substrate to displace the substrate-vacuum interfaces away from high electric fields. The temperature and power dependence of resonator behavior indicate that two-level systems still contribute significantly to energy dissipation, suggesting that more interface optimization could further improve performance.

DOI
10.1063/1.4919761

Related papers

Substrate surface engineering for high-quality silicon/aluminum superconducting resonators

C T Earnest, J. H. Béjanin, T G McConkey +4 more

Abstract Quantum bits (qubits) with long coherence times are an important element for the implementation of medium- and large-scale quantum computers. In the case of superconducting planar qubits, understanding and improving qubits’ quality can be achieved by studying superconducting planar resonators. In this paper, we fabricate and characterize coplanar waveguide resonators made from aluminum thin films deposited on silicon substrates. We perform three different substrate surface treatments prior to aluminum deposition: one chemical treatment based on a hydrofluoric acid clean; one physical treatment consisting of a thermal annealing at 880 °C in high vacuum; and one combined treatment comprising both the chemical and the physical treatments. The aim of these treatments is to remove the two-level state (TLS) defects hosted by the native oxides residing at the various samples’ interfaces. We first characterize the fabricated samples through cross-sectional tunneling electron microscopy, acquiring electron energy loss spectroscopy maps of the samples’ cross sections. These measurements show that both the chemical and the physical treatments almost entirely remove native silicon oxide from the substrate surface and that their combination results in the cleanest interface. Additionally, we analyze the effects of the various substrate treatments on the roughness of the silicon surface by means of atomic force microscopy surface morphology mapping. We then study the quality of the resonators by means of microwave measurements in the ‘quantum regime’, i.e., at a temperature T ∼ 10 mK and at a mean microwave photon number 〈 n ph 〉 ∼ 1 . In this regime, we find that both surface treatments independently improve the resonator’s intrinsic quality factor by ≈172%. The highest quality factor is obtained for the combined treatment, Q i ≈ 0.82 million, corresponding to an improvement by ≈256%. Finally, we find that the TLS quality factor averaged over a time period of 3 h is ∼3 million at 〈 n ph 〉 ∼ 10 , indicating that substrate surface engineering can potentially reduce the TLS loss below other losses such as quasiparticle loss and flux noise.

arXiv:1807.08072•Superconductor Science and Technology•Oct 1, 2018•77 citations

Tantalum-Encapsulated Niobium Superconducting Resonators: High Internal Quality Factor and Improved Temporal Stability via Surface Passivation

Anas Alkhazaleh, Juan Villegas, Florent Ravaux +1 more

Superconducting coplanar waveguide resonators are essential components in quantum processors, where their internal quality factor (Qi) constrains qubit coherence and readout fidelity. In niobium devices, microwave losses at millikelvin temperatures are strongly influenced by two-level systems (TLS) associated with the complex NbOx surface oxide. To mitigate these losses, we investigate a surface-engineering approach in which Nb films are capped in situ with a thin tantalum layer to suppress Nb2O5 formation and replace the native NbOx interface with a Ta-based oxide. We fabricate Nb/Ta bilayer and reference Nb resonators on high-resistivity silicon using identical DC sputtering and wet etching conditions, and characterize their performance at millikelvin temperatures. Fresh Ta-encapsulated devices exhibit internal quality factors up to 2.4 x 10^6 in the near-single-photon regime, with power dependence consistent with reduced TLS-related loss at the metal-air interface. A control Nb device fabricated under the same process shows comparatively lower Q_TLS, consistent with the beneficial effect of the Ta capping layer. Furthermore, ageing tests performed on Nb/Ta resonators after six months reveal a moderate reduction in Q_TLS relative to their initial values, yet the performance remains superior to newly fabricated Nb-only devices. These results suggest that thin Ta encapsulation enhances interface quality and contributes to improved temporal stability while remaining compatible with Nb-based fabrication workflows.

quant-pharXiv:2604.09050•Apr 13, 2026•2 citations

Effect of metal/substrate interfaces on radio-frequency loss in superconducting coplanar waveguides

David Wisbey, Jiansong Gao, Michael R. Vissers +4 more

Microscopic two-level systems (TLSs) are known to contribute to loss in resonant superconducting microwave circuits. This loss increases at low power and temperatures as the TLSs become unsaturated. We find that the loss is dependent on both the substrate-superconductor interface and the roughness of the surfaces. A native, oxide-free interface reduced the loss due to TLSs. However, a rough surface in the CPW gap did not cause more TLS loss, but the overall loss was significantly increased for the roughest surfaces.

Journal of Applied Physics•Nov 1, 2010•84 citations

Using Surface Engineering to Modulate Superconducting Coplanar Microwave Resonator Performance

Evgeniya H. Lock, Peng Xu, Timothy Kohler +4 more

Superconducting microwave resonators are important components of superconducting quantum information and astronomy detector systems. In this paper, we show how to modify the microwave resonator performance after fabrication through surface engineering. In particular, we focus on titanium nitride (TiN)/silicon (Si) resonators because they have shown potential for achieving high-quality factors (Qis). Depending on the type of surface treatment, chemicalor plasma-based, we found Qis that vary by approximately a factor of 18. We used inductively coupled plasma (ICP) combined with reactive ion etching (RIE) for the plasma surface treatment. We found that the microwave resonator performance depends on the type of plasma environment, such as single gas (oxygen) or gas mixtures [argon/hydrogen (Ar/H2), argon/octafluorocyclobutane (Ar/C4F8), and argon/sulfur hexafluoride (Ar/SF6)], and the plasma processing conditions, such as treatment time, ICP power, and RIE power. Of the plasma surface treatments, the Ar/SF6environments with no or low ICP power showed the highest potential to improve Qi. The processing conditions determined the chemistry and roughness of the Si and TiN surfaces, TiN film thickness, and the overall TiN/Si resonator structure (edge and sidewall). Our results can be used as a guideline for optimizing the microwave resonator performance using surface treatments.

IEEE Transactions on Applied Superconductivity•Jan 9, 2019•14 citations

Ultra-high Q-factor superconducting tantalum resonators on 300 mm Si wafers

R. Acharya, D. Perez Lozano, Ts. Ivanov +13 more

Superconducting resonators are central to superconducting quantum information technologies and essential for bosonic qubit architectures, where long-lived storage modes enable hardware-efficient error correction. Achieving ultra-high quality factors in scalable planar circuits is challenging because multiple dissipation channels contribute to the total loss. Here we report planar $α$-Ta resonators fabricated on 300 mm ultra-high-resistivity ($>10$ k$Ω$ cm) intrinsic silicon using industrial processes, achieving median internal Q factors exceeding 40 million and maxima above 60 million. Energy-participation-ratio analysis identifies a dominant participation-controlled interface loss mechanism and places conservative upper bounds on substrate-associated dissipation. For the best-performing substrate, the inferred substrate loss tangent is below $1.0 \times 10^{-8}$, establishing industrial MCZ silicon among the lowest-loss substrate platforms reported for superconducting resonators. At the same time, the exceptionally low losses show no clear correlation with commonly cited silicon substrate metrics such as room-temperature resistivity or impurity concentrations. More broadly, these studies establish industrial 300 mm processing, careful interface engineering, and 300 mm MCZ silicon substrates as a promising platform for resonator-heavy superconducting quantum architectures with ultra-high quality factors.

quant-pharXiv:2606.10719•Jun 10, 2026•4 citations

Suspended NbN superconducting resonator for reducing intrinsic losses

Youcef Ataellah Bioud, Alexandre Rousseau, Clément Godfrin +3 more

Superconducting coplanar waveguide (CPW) microwave resonators are crucial elements in Photon detectors, Quantum-limited parametric amplifiers, Narrow-band filters, Read-out, interconnect in quantum processors and Hybrid devices, connecting solid-state spins with superconducting circuits [1-3]. In the quantum regime, the dominant loss mechanism for high-Q superconducting resonators can be attributed to parasitic two-level systems (TLSs) in the dielectrics. Interface TLSs are common by products of the fabrication process, often introduced by impurities associated with Si surfaces [3]. To reduce intrinsic losses, we employ isotropic deep reactive-ion etching (DRIE) of Si substrate to create suspended NbN superconducting resonators (SSR).In this study, thin films of niobium (Nb) and niobium nitride (NbN) are deposited on Si substrate by a DC magnetron sputtering system. The influence of the N2/Ar gas ratio, the deposition current, the substrate bias potential on the superconducting critical temperature of the films are investigated. Plasma etching of Nb and NbN in a SF6 and Cl2-BCl3 gas plasma is studied using an inductively coupled plasma (icp) reactor. Parametric studies on the effects of total gas flow rate and chamber pressure on the edge angles and etch rates are reported. Finally, the suspended NbN superconducting resonator is fabricated and will be tested. This could be applied to the fabrication of superconducting qubits in integrated circuits, offering a path towards longer qubit coherence times.Reference:[1] Landig et al. Coherent spin–photon coupling using a resonant exchange qubit. Nature 560, 179–184 (2018)[2] Tosi et al. Silicon quantum processor with robust long-distance qubit couplings. Nat Commun 8, 450 (2017)[3] Bruno et al. Reducing intrinsic loss in superconducting resonators by surface treatment and deep etching of silicon substrates, Appl. Phys. Lett. 106, 182601 (2015)[4] Kennedy et al. Tunable Nb Superconducting Resonator Based on a Constriction Nano-SQUID Fabricated with a Ne Focused Ion Beam, Phys. Rev. Applied 11, 014006 (2019).

•Nov 11, 2019•0 citations
We present microwave-frequency NbTiN resonators on silicon, systematically achieving internal quality factors above 1 M in the quantum regime. We use two techniques to reduce losses associated with two-level systems: an additional substrate surface treatment prior to NbTiN deposition to optimize the metal-substrate interface and deep reactive-ion etching of the substrate to displace the substrate-vacuum interfaces away from high electric fields. The temperature and power dependence of resonator behavior indicate that two-level systems still contribute significantly to energy dissipation, suggesting that more interface optimization could further improve performance.
Abstract Quantum bits (qubits) with long coherence times are an important element for the implementation of medium- and large-scale quantum computers. In the case of superconducting planar qubits, understanding and improving qubits’ quality can be achieved by studying superconducting planar resonators. In this paper, we fabricate and characterize coplanar waveguide resonators made from aluminum thin films deposited on silicon substrates. We perform three different substrate surface treatments prior to aluminum deposition: one chemical treatment based on a hydrofluoric acid clean; one physical treatment consisting of a thermal annealing at 880 °C in high vacuum; and one combined treatment comprising both the chemical and the physical treatments. The aim of these treatments is to remove the two-level state (TLS) defects hosted by the native oxides residing at the various samples’ interfaces. We first characterize the fabricated samples through cross-sectional tunneling electron microscopy, acquiring electron energy loss spectroscopy maps of the samples’ cross sections. These measurements show that both the chemical and the physical treatments almost entirely remove native silicon oxide from the substrate surface and that their combination results in the cleanest interface. Additionally, we analyze the effects of the various substrate treatments on the roughness of the silicon surface by means of atomic force microscopy surface morphology mapping. We then study the quality of the resonators by means of microwave measurements in the ‘quantum regime’, i.e., at a temperature T ∼ 10 mK and at a mean microwave photon number 〈 n ph 〉 ∼ 1 . In this regime, we find that both surface treatments independently improve the resonator’s intrinsic quality factor by ≈172%. The highest quality factor is obtained for the combined treatment, Q i ≈ 0.82 million, corresponding to an improvement by ≈256%. Finally, we find that the TLS quality factor averaged over a time period of 3 h is ∼3 million at 〈 n ph 〉 ∼ 10 , indicating that substrate surface engineering can potentially reduce the TLS loss below other losses such as quasiparticle loss and flux noise.
Superconducting coplanar waveguide resonators are essential components in quantum processors, where their internal quality factor (Qi) constrains qubit coherence and readout fidelity. In niobium devices, microwave losses at millikelvin temperatures are strongly influenced by two-level systems (TLS) associated with the complex NbOx surface oxide. To mitigate these losses, we investigate a surface-engineering approach in which Nb films are capped in situ with a thin tantalum layer to suppress Nb2O5 formation and replace the native NbOx interface with a Ta-based oxide. We fabricate Nb/Ta bilayer and reference Nb resonators on high-resistivity silicon using identical DC sputtering and wet etching conditions, and characterize their performance at millikelvin temperatures. Fresh Ta-encapsulated devices exhibit internal quality factors up to 2.4 x 10^6 in the near-single-photon regime, with power dependence consistent with reduced TLS-related loss at the metal-air interface. A control Nb device fabricated under the same process shows comparatively lower Q_TLS, consistent with the beneficial effect of the Ta capping layer. Furthermore, ageing tests performed on Nb/Ta resonators after six months reveal a moderate reduction in Q_TLS relative to their initial values, yet the performance remains superior to newly fabricated Nb-only devices. These results suggest that thin Ta encapsulation enhances interface quality and contributes to improved temporal stability while remaining compatible with Nb-based fabrication workflows.
Microscopic two-level systems (TLSs) are known to contribute to loss in resonant superconducting microwave circuits. This loss increases at low power and temperatures as the TLSs become unsaturated. We find that the loss is dependent on both the substrate-superconductor interface and the roughness of the surfaces. A native, oxide-free interface reduced the loss due to TLSs. However, a rough surface in the CPW gap did not cause more TLS loss, but the overall loss was significantly increased for the roughest surfaces.
Superconducting microwave resonators are important components of superconducting quantum information and astronomy detector systems. In this paper, we show how to modify the microwave resonator performance after fabrication through surface engineering. In particular, we focus on titanium nitride (TiN)/silicon (Si) resonators because they have shown potential for achieving high-quality factors (Qis). Depending on the type of surface treatment, chemicalor plasma-based, we found Qis that vary by approximately a factor of 18. We used inductively coupled plasma (ICP) combined with reactive ion etching (RIE) for the plasma surface treatment. We found that the microwave resonator performance depends on the type of plasma environment, such as single gas (oxygen) or gas mixtures [argon/hydrogen (Ar/H2), argon/octafluorocyclobutane (Ar/C4F8), and argon/sulfur hexafluoride (Ar/SF6)], and the plasma processing conditions, such as treatment time, ICP power, and RIE power. Of the plasma surface treatments, the Ar/SF6environments with no or low ICP power showed the highest potential to improve Qi. The processing conditions determined the chemistry and roughness of the Si and TiN surfaces, TiN film thickness, and the overall TiN/Si resonator structure (edge and sidewall). Our results can be used as a guideline for optimizing the microwave resonator performance using surface treatments.
Superconducting resonators are central to superconducting quantum information technologies and essential for bosonic qubit architectures, where long-lived storage modes enable hardware-efficient error correction. Achieving ultra-high quality factors in scalable planar circuits is challenging because multiple dissipation channels contribute to the total loss. Here we report planar ααα-Ta resonators fabricated on 300 mm ultra-high-resistivity (>10>10>10 kΩΩΩ cm) intrinsic silicon using industrial processes, achieving median internal Q factors exceeding 40 million and maxima above 60 million. Energy-participation-ratio analysis identifies a dominant participation-controlled interface loss mechanism and places conservative upper bounds on substrate-associated dissipation. For the best-performing substrate, the inferred substrate loss tangent is below 1.0×10−81.0 \times 10^{-8}1.0×10−8, establishing industrial MCZ silicon among the lowest-loss substrate platforms reported for superconducting resonators. At the same time, the exceptionally low losses show no clear correlation with commonly cited silicon substrate metrics such as room-temperature resistivity or impurity concentrations. More broadly, these studies establish industrial 300 mm processing, careful interface engineering, and 300 mm MCZ silicon substrates as a promising platform for resonator-heavy superconducting quantum architectures with ultra-high quality factors.
Superconducting coplanar waveguide (CPW) microwave resonators are crucial elements in Photon detectors, Quantum-limited parametric amplifiers, Narrow-band filters, Read-out, interconnect in quantum processors and Hybrid devices, connecting solid-state spins with superconducting circuits [1-3]. In the quantum regime, the dominant loss mechanism for high-Q superconducting resonators can be attributed to parasitic two-level systems (TLSs) in the dielectrics. Interface TLSs are common by products of the fabrication process, often introduced by impurities associated with Si surfaces [3]. To reduce intrinsic losses, we employ isotropic deep reactive-ion etching (DRIE) of Si substrate to create suspended NbN superconducting resonators (SSR).In this study, thin films of niobium (Nb) and niobium nitride (NbN) are deposited on Si substrate by a DC magnetron sputtering system. The influence of the N2/Ar gas ratio, the deposition current, the substrate bias potential on the superconducting critical temperature of the films are investigated. Plasma etching of Nb and NbN in a SF6 and Cl2-BCl3 gas plasma is studied using an inductively coupled plasma (icp) reactor. Parametric studies on the effects of total gas flow rate and chamber pressure on the edge angles and etch rates are reported. Finally, the suspended NbN superconducting resonator is fabricated and will be tested. This could be applied to the fabrication of superconducting qubits in integrated circuits, offering a path towards longer qubit coherence times.Reference:[1] Landig et al. Coherent spin–photon coupling using a resonant exchange qubit. Nature 560, 179–184 (2018)[2] Tosi et al. Silicon quantum processor with robust long-distance qubit couplings. Nat Commun 8, 450 (2017)[3] Bruno et al. Reducing intrinsic loss in superconducting resonators by surface treatment and deep etching of silicon substrates, Appl. Phys. Lett. 106, 182601 (2015)[4] Kennedy et al. Tunable Nb Superconducting Resonator Based on a Constriction Nano-SQUID Fabricated with a Ne Focused Ion Beam, Phys. Rev. Applied 11, 014006 (2019).