Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1412.0809 · Scientific Reports

Bi-photon spectral correlation measurements from a silicon nanowire in the quantum and classical regimes

Iman Jizan, L. G. Helt, Chunle Xiong, Matthew J. Collins, Duk‐Yong Choi, Chang Joon Chae, Marco Liscidini, Michael J. Steel, Benjamin J. Eggleton, Alex S. Clark

Published Jul 28, 2015• 38 citations
arXivHTMLPDF

Abstract

The growing requirement for photon pairs with specific spectral correlations in quantum optics experiments has created a demand for fast, high resolution and accurate source characterisation. A promising tool for such characterisation uses classical stimulated processes, in which an additional seed laser stimulates photon generation yielding much higher count rates, as recently demonstrated for a χ(2) integrated source in A. Eckstein et al. Laser Photon. Rev. 8, L76 (2014). In this work we extend these results to χ(3) integrated sources, directly measuring for the first time the relation between spectral correlation measurements via stimulated and spontaneous four wave mixing in an integrated optical waveguide, a silicon nanowire. We directly confirm the speed-up due to higher count rates and demonstrate that this allows additional resolution to be gained when compared to traditional coincidence measurements without any increase in measurement time. As the pump pulse duration can influence the degree of spectral correlation, all of our measurements are taken for two different pump pulse widths. This allows us to confirm that the classical stimulated process correctly captures the degree of spectral correlation regardless of pump pulse duration, and cements its place as an essential characterisation method for the development of future quantum integrated devices.

DOI
10.1038/srep12557

Related papers

High Resolution Bi-Photon Spectral Correlation Measurements from a Silicon Nanowire in the Quantum and Classical Regimes

Iman Jizan, Luke G. Helt, Chunle Xiong +7 more

We use classical stimulated four-wave mixing to directly characterize quantum spectral correlations generated in a silicon nanowire for two different pump durations. Signal to noise is increased and acquisition time reduced compared to coincidence detection.

Conference on Lasers and Electro-Optics•Jan 1, 2015•1 citation

Manipulation and characterisation of two photon spectral correlation states in nonlinear devices

Iman Jizan

In quantum photonics, the requirement for photon pairs with specific quantum states has led to a demand for a fast, high resolution and accurate characterisation of photon pair sources. However, current quantum methods of characterisation suffer from limited accuracy and resolution, and only consist of intensity measurements that prevent access to phase-sensitive measurement photon pairs. A promising tool that addresses these challenges, uses the classical analogue of nonlinear processes to stimulate photon generation, yielding much higher count rates that allows for a higher resolution and accurate photon pair source characterisation. Furthermore, this classical measurement allows for an innovative method to perform full phase-sensitive quantum tomography of photon pair sources that was previous thought to be experimentally challenging to obtain. This thesis examines and compares the quantum and classical method of characterisation of spectral correlations in χ^3 nonlinear devices; namely two integrated silicon nanowires, and a highly nonlinear fibre. In the first study, we use stimulated nonlinear process to confirm the speed-up of characterisation of photon pairs and demonstrate that additional resolution is gained when compared to the traditional coincidence measurements with no increase in measurement time. By applying this technique with phase-sensitive amplification to another identical silicon nanowire, the first phase sensitive measurements are presented showing details that are otherwise hidden in traditional intensity measurements. Furthermore, phase-sensitive measurement of a highly nonlinear fibre shows that phase-sensitive measurements have excellent sensitivity to small features when compared to the traditional intensity measurements.

•Jun 29, 2016•0 citations

Energy correlations of photon pairs generated by a silicon microring resonator probed by Stimulated Four Wave Mixing

Davide Grassani, Angelica Simbula, Stefano Pirotta +8 more

Compact silicon integrated devices, such as micro-ring resonators, have recently been demonstrated as efficient sources of quantum correlated photon pairs. The mass production of integrated devices demands the implementation of fast and reliable techniques to monitor the device performances. In the case of time-energy correlations, this is particularly challenging, as it requires high spectral resolution that is not currently achievable in coincidence measurements. Here we reconstruct the joint spectral density of photons pairs generated by spontaneous four-wave mixing in a silicon ring resonator by studying the corresponding stimulated process, namely stimulated four wave mixing. We show that this approach, featuring high spectral resolution and short measurement times, allows one to discriminate between nearly-uncorrelated and highly-correlated photon pairs.

arXiv:1602.04962•Scientific Reports•Apr 1, 2016•54 citations

High repetition rate correlated photon pair generation in integrated silicon nanowires

Xiang Zhang, Bryn A. Bell, Mark D. Pelusi +6 more

Integrated single-photon sources are a key component for photonic quantum technology but are generally limited to low single-photon rates. For sources based on photon pair generation by four-wave mixing, increasing the repetition rate of pump laser pulses is a straightforward way to enhance the single-photon rate, but the benefits and practical limitations have not yet been demonstrated and analyzed in a CMOS-compatible platform. In this work, we demonstrate correlated photon pair generation in integrated silicon nanowires and systematically analyze the count rate and coincidence to accidental ratio as the pump rate is varied between 156.25 MHz and 10 GHz. We show that the highest useful pump rate is limited by the timing resolution of the single-photon detection system, and that in this regime, the nonlinear loss of the silicon nanowire does not have a significant effect on the single-photon generation.

Applied Optics•Oct 16, 2017•9 citations

Real-time spectral characterization of a photon pair source using a chirped supercontinuum seed

Jennifer Erskine, Duncan G. England, Connor Kupchak +1 more

Photon pair sources have wide ranging applications in a variety of quantum photonic experiments and protocols. Many of these protocols require well controlled spectral correlations between the two output photons. However, due to low cross-sections, measuring the joint spectral properties of photon pair sources has historically been a challenging and time-consuming task. Here, we present an approach for the real-time measurement of the joint spectral properties of a fiber-based four wave mixing source. We seed the four wave mixing process using a broadband chirped pulse, studying the stimulated process to extract information regarding the spontaneous process. In addition, we compare stimulated emission measurements with the spontaneous process to confirm the technique's validity. Joint spectral measurements have taken many hours historically and several minutes with recent techniques. Here, measurements have been demonstrated in 5-30 s depending on resolution, offering substantial improvement. Additional benefits of this approach include flexible resolution, large measurement bandwidth, and reduced experimental overhead.

Optics Letters•Feb 13, 2018•6 citations

High-resolution spectral characterization of two photon states via classical measurements

A. Eckstein, Guillaume Boucher, Aristide Lemaître +6 more

Quantum optics plays a central role in the study of fundamental concepts in quantum mechanics, and in the development of new technological applications. Typical experiments employ sources of photon pairs generated by parametric processes such as spontaneous parametric down-conversion and spontaneous four-wave-mixing. The standard characterization of these sources relies on detecting the pairs themselves and thus requires single photon detectors, which limit both measurement speed and accuracy. Here it is shown that the two-photon quantum state that would be generated by parametric fluorescence can be characterised with unprecedented spectral resolution by performing a classical experiment. This streamlined technique gives access to hitherto unexplored features of two-photon states and has the potential to speed up design and testing of massively parallel integrated nonlinear sources by providing a fast and reliable quality control procedure. Additionally, it allows for the engineering of quantum light states at a significantly higher level of spectral detail, powering future quantum optical applications based on time-energy photon correlations.

arXiv:1312.4197•Laser & Photonics Review•Jun 24, 2014•107 citations
The growing requirement for photon pairs with specific spectral correlations in quantum optics experiments has created a demand for fast, high resolution and accurate source characterisation. A promising tool for such characterisation uses classical stimulated processes, in which an additional seed laser stimulates photon generation yielding much higher count rates, as recently demonstrated for a χ(2) integrated source in A. Eckstein et al. Laser Photon. Rev. 8, L76 (2014). In this work we extend these results to χ(3) integrated sources, directly measuring for the first time the relation between spectral correlation measurements via stimulated and spontaneous four wave mixing in an integrated optical waveguide, a silicon nanowire. We directly confirm the speed-up due to higher count rates and demonstrate that this allows additional resolution to be gained when compared to traditional coincidence measurements without any increase in measurement time. As the pump pulse duration can influence the degree of spectral correlation, all of our measurements are taken for two different pump pulse widths. This allows us to confirm that the classical stimulated process correctly captures the degree of spectral correlation regardless of pump pulse duration, and cements its place as an essential characterisation method for the development of future quantum integrated devices.
In quantum photonics, the requirement for photon pairs with specific quantum states has led to a demand for a fast, high resolution and accurate characterisation of photon pair sources. However, current quantum methods of characterisation suffer from limited accuracy and resolution, and only consist of intensity measurements that prevent access to phase-sensitive measurement photon pairs. A promising tool that addresses these challenges, uses the classical analogue of nonlinear processes to stimulate photon generation, yielding much higher count rates that allows for a higher resolution and accurate photon pair source characterisation. Furthermore, this classical measurement allows for an innovative method to perform full phase-sensitive quantum tomography of photon pair sources that was previous thought to be experimentally challenging to obtain. This thesis examines and compares the quantum and classical method of characterisation of spectral correlations in χ^3 nonlinear devices; namely two integrated silicon nanowires, and a highly nonlinear fibre. In the first study, we use stimulated nonlinear process to confirm the speed-up of characterisation of photon pairs and demonstrate that additional resolution is gained when compared to the traditional coincidence measurements with no increase in measurement time. By applying this technique with phase-sensitive amplification to another identical silicon nanowire, the first phase sensitive measurements are presented showing details that are otherwise hidden in traditional intensity measurements. Furthermore, phase-sensitive measurement of a highly nonlinear fibre shows that phase-sensitive measurements have excellent sensitivity to small features when compared to the traditional intensity measurements.
Compact silicon integrated devices, such as micro-ring resonators, have recently been demonstrated as efficient sources of quantum correlated photon pairs. The mass production of integrated devices demands the implementation of fast and reliable techniques to monitor the device performances. In the case of time-energy correlations, this is particularly challenging, as it requires high spectral resolution that is not currently achievable in coincidence measurements. Here we reconstruct the joint spectral density of photons pairs generated by spontaneous four-wave mixing in a silicon ring resonator by studying the corresponding stimulated process, namely stimulated four wave mixing. We show that this approach, featuring high spectral resolution and short measurement times, allows one to discriminate between nearly-uncorrelated and highly-correlated photon pairs.
Integrated single-photon sources are a key component for photonic quantum technology but are generally limited to low single-photon rates. For sources based on photon pair generation by four-wave mixing, increasing the repetition rate of pump laser pulses is a straightforward way to enhance the single-photon rate, but the benefits and practical limitations have not yet been demonstrated and analyzed in a CMOS-compatible platform. In this work, we demonstrate correlated photon pair generation in integrated silicon nanowires and systematically analyze the count rate and coincidence to accidental ratio as the pump rate is varied between 156.25 MHz and 10 GHz. We show that the highest useful pump rate is limited by the timing resolution of the single-photon detection system, and that in this regime, the nonlinear loss of the silicon nanowire does not have a significant effect on the single-photon generation.
Photon pair sources have wide ranging applications in a variety of quantum photonic experiments and protocols. Many of these protocols require well controlled spectral correlations between the two output photons. However, due to low cross-sections, measuring the joint spectral properties of photon pair sources has historically been a challenging and time-consuming task. Here, we present an approach for the real-time measurement of the joint spectral properties of a fiber-based four wave mixing source. We seed the four wave mixing process using a broadband chirped pulse, studying the stimulated process to extract information regarding the spontaneous process. In addition, we compare stimulated emission measurements with the spontaneous process to confirm the technique's validity. Joint spectral measurements have taken many hours historically and several minutes with recent techniques. Here, measurements have been demonstrated in 5-30 s depending on resolution, offering substantial improvement. Additional benefits of this approach include flexible resolution, large measurement bandwidth, and reduced experimental overhead.
Quantum optics plays a central role in the study of fundamental concepts in quantum mechanics, and in the development of new technological applications. Typical experiments employ sources of photon pairs generated by parametric processes such as spontaneous parametric down-conversion and spontaneous four-wave-mixing. The standard characterization of these sources relies on detecting the pairs themselves and thus requires single photon detectors, which limit both measurement speed and accuracy. Here it is shown that the two-photon quantum state that would be generated by parametric fluorescence can be characterised with unprecedented spectral resolution by performing a classical experiment. This streamlined technique gives access to hitherto unexplored features of two-photon states and has the potential to speed up design and testing of massively parallel integrated nonlinear sources by providing a fast and reliable quality control procedure. Additionally, it allows for the engineering of quantum light states at a significantly higher level of spectral detail, powering future quantum optical applications based on time-energy photon correlations.