The field of quantum information has been growing fast over the past decade. Optical quantum computation, based on the concepts of KLM and cluster states, has witnessed experimental realizations of larger and more complex systems in terms of photon number. Quantum optical systems, which offer long coherence times and easy manipulation of single qubits, allow us to probe quantum properties of the light itself and of the physical systems around it. Recently, a linear scheme for quantum computing, relying on the bosonic nature of particles, has been proposed and realized experimentally with photons. The ability to efficiently measure superpositions of quantum states consisting of several photons is essential to the characterization of such systems. In fact, the entire field of quantum information completely relies on the ability to recover quantum states from measurements. However, the characterization of quantum states requires many measurements, and often necessitates complicated measurements schemes; for example, characterizing qubits requires measurements. Here, we utilize structure, inherent to physically interesting quantum states of light, in order to reduce the complexity in the recovery of a quantum state. In particular, we devise a method enabling the recovery of three-photon quantum states from only two-fold correlation measurements in a single setting. The ability to take two-fold coincidences instead of three-fold offers the recovery of the quantum states in far less measurements and in a considerably higher SNR, because detection of two-photon events is much more likely than that of three-photon ones. The concept suggested here paves the way to further ideas on structure-based super resolution in quantum state tomography, such as recovering a quantum state in an unknown basis in a single setup and recovering the state of several photons without number resolving detectors.
The field of quantum information has been growing fast over the past decade. Optical quantum computation, based on the concepts of KLM and cluster states, has witnessed experimental realizations of larger and more complex systems in terms of photon number. Quantum optical systems, which offer long coherence times and easy manipulation of single qubits, allow us to probe quantum properties of the light itself and of the physical systems around it. Recently, a linear scheme for quantum computing, relying on the bosonic nature of particles, has been proposed and realized experimentally with photons. The ability to efficiently measure superpositions of quantum states consisting of several photons is essential to the characterization of such systems. In fact, the entire field of quantum information completely relies on the ability to recover quantum states from measurements. However, the characterization of quantum states requires many measurements, and often necessitates complicated measurements schemes; for example, characterizing qubits requires measurements. Here, we utilize structure, inherent to physically interesting quantum states of light, in order to reduce the complexity in the recovery of a quantum state. In particular, we devise a method enabling the recovery of three-photon quantum states from only two-fold correlation measurements in a single setting. The ability to take two-fold coincidences instead of three-fold offers the recovery of the quantum states in far less measurements and in a considerably higher SNR, because detection of two-photon events is much more likely than that of three-photon ones. The concept suggested here paves the way to further ideas on structure-based super resolution in quantum state tomography, such as recovering a quantum state in an unknown basis in a single setup and recovering the state of several photons without number resolving detectors.
Quantum information has been drawing a wealth of research in recent years, shedding light on questions at the heart of quantum mechanics, as well as advancing fields such as complexity theory, cryptography, key distribution, and chemistry. These fundamental and applied aspects of quantum information rely on a crucial issue: the ability to characterize a quantum state from measurements, through a process called Quantum State Tomography (QST). However, QST requires a large number of measurements, each derived from a different physical observable corresponding to a different experimental setup. Unfortunately, changing the setup results in unwanted changes to the data, prolongs the measurement and impairs the assumptions that are always made about the stationarity of the noise. Here, we propose to overcome these drawbacks by performing QST with a single observable. A single observable can often be realized by a single setup, thus considerably reducing the experimental effort. In general, measurements of a single observable do not hold enough information to recover the quantum state. We overcome this lack of information by relying on concepts inspired by Compressed Sensing (CS), exploiting the fact that the sought state - in many applications of quantum information - is close to a pure state (and thus has low rank). Additionally, we increase the system dimension by adding an ancilla that couples to information evolving in the system, thereby providing more measurements, enabling the recovery of the original quantum state from a single-observable measurements. We demonstrate our approach on multi-photon states by recovering structured quantum states from a single observable, in a single experimental setup. We further show how this approach can be used to recover quantum states without number-resolving detectors.
Over the last sixty years, classical information theory has revolutionized the understanding of the nature of information, and how it can be quantified and manipulated. Quantum information processing extends these lessons to quantum systems, where the properties of intrinsic uncertainty and entanglement fundamentally defy classical explanation. This growing field has many potential applications, including computing, cryptography, communication, and metrology. As inherently mobile quantum particles, photons are likely to play an important role in any mature large-scale quantum information processing system. However, the available methods for producing and detecting complex multi-photon states place practical limits on the feasibility of sophisticated optical quantum information processing experiments. In a typical quantum information protocol, a source first produces an interesting or useful quantum state (or set of states), perhaps involving superposition or entanglement. Then, some manipulations are performed on this state, perhaps involving quantum logic gates which further manipulate or entangle the intial state. Finally, the state must be detected, obtaining some desired measurement result, e.g., for secure communication or computationally efficient factoring. The work presented here concerns the first and last stages of this process as they relate to photons: sources and detectors. Our work on sources is based on the need for optimized non-classical states of light delivered at high rates, particularly of single photons in a pure quantum state. We seek to better understand the properties of spontaneous parameteric downconversion (SPDC) sources of photon pairs, and in doing so, produce such an optimized source. We report an SPDC source which produces pure heralded single photons with little or no spectral filtering, allowing a significant rate enhancement. Our work on detectors is based on the need to reliably measure single-photon states. We have focused on optimizing the detection efficiency of visible light photon counters (VLPCs), a single-photon detection technology that is also capable of resolving photon number states. We report a record-breaking quantum efficiency of 91 +/- 3% observed with our detection system. Both sources and detectors are independently interesting physical systems worthy of study, but together they promise to enable entire new classes and applications of information based on quantum mechanics.
In the case of mixed states ρAB of the composite system A ⊗ B, the previous relation generalizes to ρAB = ∑ k pkρ A k ⊗ρk , where pk are probabilities and ρk ’s (ρk ’s) are generic density matrix of the system A (B). The entanglement derives from “subtle” nonlocal correlations between the parts of a quantum system and combines three basic structural elements of quantum theory: the superposition principle, the quantum non-separability property and the exponential scaling of the state space with the number of partitions. This unique resource can be used to perform computational and cryptographic tasks otherwise impossible with classical systems. An entangled state shared by two or more separated parties is a valuable resource for fundamental quantum protocols, such as quantum teleportation [2], quantum computing [3] and quantum cryptography. By using entangled states we can deeply investigate the nonlocal properties of the quantum world. In fact, an entangled system exhibits correlations between two (or more) parties, which cannot be reproduced by a classical theory or, in general, by a Local Hidden Variables Theory (LHVT). Quantum optics represents an excellent experimental test bench for various novel concepts introduced within the framework of quantum information theory. Quantum states of photons, generally produced by a probabilistic process, namely spontaneous parametric down conversion (SPDC), may be easily and accurately manipulated using linear and nonlinear optical devices and measured by efficient single-photon detectors. Photonic qubits represent the typical carrier of quantum information and can be distributed over long distances, either in free-space or in low-loss optical fibers. Two-particle experiments correspond to operate with qubits belonging to a (2 × 2) Hilbert space. Many quantum information tasks and fundamental tests of quantum mechanics, such as the simulation of properties of quantum systems, the realization of quantum algorithms of increasing complexity and the investigation of the quantum world at a mesoscopic level, deal with a large number of qubits. In order to take full advantage of the possibilities offered by quantum mechanics, more qubits must be added to a quantum state. Two approaches may be followed to increase the number of qubits. The first one consists of increasing the number of entangled particles. In this way, multi-qubit entangled states are created by distributing the qubits between the particles so that each particle carries one qubit. A second strategy consists of encoding more than one qubit in each particle, by exploiting different degrees of freedom (DOFs) of the photon such as the polarization, the path, the emission time, the orbital angular momentum. This has been used to create two-photon fourand six-qubit states and up to five-photon ten-qubit graph states. The entanglement of two particles in different DOFs corresponds to socalled hyperentanglement. It is worth noting that multi-qubit hyperentanglement allows to achieve higher
This thesis fathoms the possibilities and limitations of measurements in quantum optics. After a short introduction to the general aspects of measurements in quantum mechanics, it presents three examples of a measurement process in concrete applications to quantum optics. For one, while operators describing quantities of interest might have a simple theoretical form, it is often hard to actually implement a measurement of their expectation values experimentally. This situation is encountered in the first part which is devoted to the measurement of quantum statistical properties of a light beam. In contrast to classical optics, these statistics are not fully determined by first- and second-order correlations. Instead, higher-order correlations, usually described by non-Hermitian operators, are necessary to characterize the quantum state completely. A particular example is the N-photon Fock state, for which only a measurement of the Nth-order correlations allows for a full characterization. Here, we present a new method how to measure an important class of Nth-order correlations for arbitrary N in a single spatial mode with two polarizations with limited experimental resources. The second part is again centered around the realization of specific measurement operators for photon correlation measurements. However, in contrast to the previous chapter, these measurements are not an end in their own, but are designed to create specific quantum states as a consequence of the measurement process: A suitable measurement of photons emitted by a number of atoms allows to transfer the atoms into long-lived entangled states. We find that with this method it is possible to entangle two remote atomic qubits to an arbitrary and well-defined degree. Furthermore, we show how to generate two families of quantum states in an arbitrary number of remote atomic qubits: one family consists of all -- symmetric and non-symmetric -- total angular momentum eigenstates in N remote qubits, the other is a family of cluster states. It is also systematically investigated whether the technique of quantum state engineering by projective measurements allows for the creation of any arbitrary state. We find explicit solutions for the case of two and three qubits, while it is shown that no solution exist for N > 6. We conclude the section by proving that with some changes in the setup, this measurement-based quantum state engineering technique allows to create the same states among the scattered photons themselves rather than among the emitting atoms. The last part is devoted to the amount of information one is able to gain about a given system when performing a measurement. The corresponding limits of information are investigated at the example of the duality that arises in a two-way interferometer between the visibility of the interference pattern and the knowledge about the path of the interfering object. We show that there exist correlations between the phase difference the interfering object acquires on its way through the interferometer and the amount of which-way information retrievable from certain observables of the which-way detector. In this way, the which-way information becomes a phase-dependent quantity. In particular, we find that for certain values of the phase shift, the amount of extractable which-way information can be larger than allowed by phase-independent measurement. This property is put to use to find the optimal observable for the which-way detector readout in dependence on the phase of the interfering object. Following this strategy, we are able to gain more which-way information than previously thought possible.
Photonic quantum technologies utilize various degrees of freedom (DOFs) of light, such as polarization, frequency, and spatial modes, to encode quantum information. In the effort of further improving channel capacity of quantum communication, and for increasing the complexity of available quantum operations, high-dimensional and hyperentangled states are now gaining interest. However, efficiently measuring these high dimensional states is challenging due to the large number of measurements required for reconstructing the full density matrix via quantum state tomography (QST), and the fact that each measurement requires some modification in the experimental setup. Here, we propose a framework for reconstructing the density matrix of a single-photon hyperentangled across multiple DOFs using a single intensity-measurement obtainable from traditional cameras, and discuss extensions for multiphoton hyperentangled states. Our method hinges on the spatial DOF of the photon and uses it to encode the quantum information from the other DOFs. We numerically demonstrate this method for single-photon OAM-spin and OAM-frequency entangled states using an ideal coupler and a multimode fiber, to perform the information mixing and transfer the encoding to spatial information, where it is detected using a simple camera. This technique simplifies the experimental setup and reduces acquisition time compared to traditional QST-based methods. Moreover, it allows the recovery of DOFs that conventional cameras cannot detect, such as polarization, thus eliminating the need for projection measurements.
A description of states of light in terms of photons allows for a clear delineation between classical and non-classical light. The development of single-photon sources and detectors has enabled experimental studies of quantum light at the single-photon level, proving essential for applications in quantum communication, sensing, and imaging. Multi-photon quantum states, existing in higher-dimensional spaces, extend these applications and open opportunities to study the rich space of non-classical light states. Platforms for sourcing and characterizing such states have been increasingly explored to leverage the quantum resources they offer. Arithmetic operations of photon addition and subtraction, allow for generating non-classical multi-photon light from classical sources like coherent and squeezed states, as well as for photon-number-resolved (PNR) detection. PNR detection is essential for characterizing multi-photon states,providing access to their photon-number distributions and higher-order correlations, and enabling advanced quantum tomography.