The global phase diagram of wetting in the two-dimensional Ising model is obtained through the exact calculation of the surface excess free energy. In addition to a surface field for inducing wetting, a surface-coupling enhancement is also included. The wetting transition (of second order) is critical for any finite ratio of surface coupling J_{s} to bulk coupling J, and becomes of first order in the limit J_{s}/J→∞. However, for J_{s}/J≫1, the critical region is exponentially small and is practically invisible to numerical studies. A distinct preasymptotic regime exists in which the transition displays first-order character. In this regime, surprisingly, the surface susceptibility and surface specific heat develop a divergence and show anomalous scaling with an exponent equal to 3/2.
The global phase diagram of wetting in the two-dimensional Ising model is obtained through the exact calculation of the surface excess free energy. In addition to a surface field for inducing wetting, a surface-coupling enhancement is also included. The wetting transition (of second order) is critical for any finite ratio of surface coupling J_{s} to bulk coupling J, and becomes of first order in the limit J_{s}/J→∞. However, for J_{s}/J≫1, the critical region is exponentially small and is practically invisible to numerical studies. A distinct preasymptotic regime exists in which the transition displays first-order character. In this regime, surprisingly, the surface susceptibility and surface specific heat develop a divergence and show anomalous scaling with an exponent equal to 3/2.
We performed extensive simulations of the random-bond Ising model confined between walls where competitive surface fields act. By properly taking the thermodynamic limit we unambiguously determined wetting transition points of the system, as extrapolation of localization-delocalization transitions of the interface between domains of different orientation driven by the respective fields. The finite-size scaling theory for wetting with short-range fields [E. V. Albano and K. Binder, Phys. Rev. Lett. 109, 036101 (2012)] establishes that the average magnetization of the sample, with critical exponent $\ensuremath{\beta}$, is the proper order parameter for the study of wetting. While the hyperscaling relationship given by $\ensuremath{\gamma}+2\ensuremath{\beta}={\ensuremath{\nu}}_{\ensuremath{\parallel}}+{\ensuremath{\nu}}_{\ensuremath{\perp}}$ requires $\ensuremath{\beta}=1/2$ ($\ensuremath{\gamma}=4, {\ensuremath{\nu}}_{\ensuremath{\parallel}}=3$, and ${\ensuremath{\nu}}_{\ensuremath{\perp}}=2$), the thermodynamic scaling establishes that ${\mathrm{\ensuremath{\Delta}}}_{s}=\ensuremath{\gamma}+\ensuremath{\beta}$, which in contrast requires $\ensuremath{\beta}=0$ (${\mathrm{\ensuremath{\Delta}}}_{s}=4$), where $\ensuremath{\gamma}, {\ensuremath{\nu}}_{\ensuremath{\parallel}}, {\ensuremath{\nu}}_{\ensuremath{\perp}}$, and ${\mathrm{\ensuremath{\Delta}}}_{s}$ are the critical exponents of the susceptibility, the correlation lengths parallel and perpendicular to the interface, and the gap exponent, respectively. So, we formulate a finite-size scaling theory for wetting without hyperscaling and perform numerical simulations that provide strong evidence of hyperscaling violation (i.e., $\ensuremath{\beta}=0$) and a direct measurement of the susceptibility critical exponent $\ensuremath{\gamma}/{\ensuremath{\nu}}_{\ensuremath{\perp}}=2.0\ifmmode\pm\else\textpm\fi{}0.2$, in agreement with theoretical results for the strong fluctuation regime of wetting transitions with quenched noise.
The effect of edge on wetting and layering transitions of a three-dimensional spin-1/2 Ising model is investigated, in the presence of longitudinal and surface magnetic fields, using mean field theory and Monte Carlo simulations. For T=0, the ground state phase diagram shows that there exist only three allowed transitions, namely, surface and bulk transition, surface transition, and bulk transition. However, there exist a surface intralayering temperature T(s)(L), above which the surface and the intralayering surface transitions occur. While the bulk layering and intralayering transitions appear above another finite temperature T(b)(L)(>or=T(s)(L)). These surface and bulk intralayering transitions are not seen in the perfect surfaces case. Numerical values of T(s)(L) and T(b)(L), computed by Monte Carlo method are found to be smaller than those obtained using mean field theory. However, the results predicted by the two methods become similar, and are exactly those given by the ground state phase diagram, for very low temperatures. On the other hand, the behavior of the local magnetizations as a function of the external magnetic field, shows that the transitions are of the first order type. T(s)(L) and T(b)(L) decrease when increasing the system size and/or the surface magnetic field. In particular, T(b)(L) reaches the wetting temperature T(w) for sufficiently large system sizes.
Clarification of critical wetting with short-range forces by simulations has been hampered by the lack of accurate methods to locate where the transition occurs. We solve this problem by developing an anisotropic finite-size scaling approach and show that then the wetting transition is a "bulk" critical phenomenon with order parameter exponent equal to zero. For the Ising model in two dimensions, known exact results are straightforwardly reproduced. In three dimensions, it is shown that previous estimates for the location of the transition need revision, but the conclusions about a slow crossover away from mean-field behavior remain unaltered.
We consider an Ising model confined in an $L\ifmmode\times\else\texttimes\fi{}\ensuremath{\infty}$ geometry with identical surface fields at the boundaries. According to the Kelvin equation the bulk coexistence field scales as 1/L for large L; thermodynamics and scaling arguments predict higher-order corrections of the type 1/L2 and 1/L5/3 at partial and complete wetting, respectively. Our numerical results, obtained by density-matrix renormalization techniques for systems of widths up to L=144, are in agreement with a 1/L2 correction in the partially wet regime. However, at complete wetting we find a large range of surface fields and temperatures with a correction to scaling of type 1/L4/3. We show that this term is generated by a thin wetting layer whose free energy is dominated by the contacts with the wall. For L sufficiently large we expect a crossover to a 1/L5/3 correction as predicted by the theory for a thick wetting layer. This crossover is indeed found in a solid-on-solid model, which provides a simplified description of the wetting layer and allows the study of much larger systems than those available in a density-matrix renormalization calculation.
The spectrum of the transfer matrix of a semi-infinite two-dimensional Isin model with marginally inhomogeneous couplings has been determined exactly in the finite-size-scaling limit at the bulk critical point. Depending on the local temperature at the boundary the surface phase transition of this system is either of first order or of second order with nonuniversal critical exponents. For a second-order transition, the excitation energies of the transfer matrix are inversely proportional to the linear size (N) of the system, but the levels are not equidistantly spaced. On the other hand, for a first-order transition the lowest gap vanishes algegraically, but faster than 1/N.
We obtain an exact solution of the d = 2 infinite Ising strip with surface fields of opposite signs , . Earlier predictions by Parry et al are confirmed of the crucial importance of wetting for a system confined between two parallel walls that exert competitive surface fields. The transition of the magnetization profile m(z) from the partial wetting regime below the critical wetting temperature at a single wall with a surface field , to the soft-mode single phase in the temperature range , where is the critical temperature of the bulk system, is described in detail. A scaling ansatz is verified for the singular part of the surface excess free energy, and for the profile, . The modification of the magnetization profile near one wall, due to wetting, is studied. Near the (-) wall at the profile is found to be a linear function of the scaled distance but its slope is different than for the case of perfect asymmetry system hence these two cases belong to the different universality regime.