The problem of expanding a density operator $\ensuremath{\rho}$ in forms that simplify the evaluation of important classes of quantum-mechanical expectation values is studied. The weight function $P(\ensuremath{\alpha})$ of the
P representation, the Wigner distribution $W(\ensuremath{\alpha})$, and the function $〈\ensuremath{\alpha}|\ensuremath{\rho}|\ensuremath{\alpha}〉$, where $|\ensuremath{\alpha}〉$ is a coherent state, are discussed from a unified point of view. Each of these quasiprobability distributions is examined as the expectation value of a Hermitian operator, as the weight function of an integral representation for the density operator and as the function associated with the density operator by one of the operator-function correspondences defined in the preceding paper. The weight function $P(\ensuremath{\alpha})$ of the
P representation is shown to be the expectation value of a Hermitian operator all of whose eigenvalues are infinite. The existence of the function $P(\ensuremath{\alpha})$ as an infinitely differentiable function is found to be equivalent to the existence of a well-defined antinormally ordered series expansion for the density operator in powers of the annihilation and creation operators
a and ${a}^{\ifmmode\dagger\else\textdagger\fi{}}$. The Wigner distribution $W(\ensuremath{\alpha})$ is shown to be a continuous, uniformly bounded, square-integrable weight function for an integral expansion of the density operator and to be the function associated with the symmetrically ordered power-series expansion of the density operator. The function $〈\ensuremath{\alpha}|\ensuremath{\rho}|\ensuremath{\alpha}〉$, which is infinitely differentiable, corresponds to the normally ordered form of the density operator. Its use as a weight function in an integral expansion of the density operator is shown to involve singularities that are closely related to those which occur in the
P representation. A parametrized integral expansion of the density operator is introduced in which the weight function $W(\ensuremath{\alpha},s)$ may be identified with the weight function $P(\ensuremath{\alpha})$ of the
P representation, with the Wigner distribution $W(\ensuremath{\alpha})$, and with the function $〈\ensuremath{\alpha}|\ensuremath{\rho}|\ensuremath{\alpha}〉$ when the order parameter
s assumes the values $s=+1, 0, \ensuremath{-}1$, respectively. The function $W(\ensuremath{\alpha},s)$ is shown to be the expectation value of the ordered operator analog of the $\ensuremath{\delta}$ function defined in the preceding paper. This operator is in the trace class for
Res<0, has bounded eigenvalues for
Res=0, and has infinite eigenvalues for
s=1. Marked changes in the properties of the quasiprobability distribution $W(\ensuremath{\alpha},s)$ are exhibited as the order parameter
s is varied continuously from $s=\ensuremath{-}1$, corresponding to the function $〈\ensuremath{\alpha}|\ensuremath{\rho}|\ensuremath{\alpha}〉$, to
s=+1, corresponding to the function $P(\ensuremath{\alpha})$. Methods for constructing these functions and for using them to compute expectation values are presented and illustrated with several examples. One of these examples leads to a physical characterization of the density operators for which the
P representation is appropriate.
A variational formalism for the determination of the spinless single-particle density matrix $\ensuremath{\gamma}(\stackrel{\ensuremath{\rightarrow}}{\mathrm{r}}, {\stackrel{\ensuremath{\rightarrow}}{\mathrm{r}}}^{\ensuremath{'}})$ for an interacting many-particle system, correct to second order, is developed. The method is based on variational principles for determining single-particle expectation values, correct to second order, without requiring highly accurate wave functions in order to represent the interacting system. The expectation value of the operator
X=Y+iZ, where $Y=(\frac{1}{2}){\ensuremath{\Sigma}}_{j}[W({\stackrel{\ensuremath{\rightarrow}}{\mathrm{r}}}_{i}){T}_{j}(\stackrel{\ensuremath{\rightarrow}}{\mathrm{a}})+W({\stackrel{\ensuremath{\rightarrow}}{\mathrm{r}}}_{j}^{\ensuremath{'}}){T}_{j}(\ensuremath{-}\stackrel{\ensuremath{\rightarrow}}{\mathrm{a}})]$, $Z=\ensuremath{-}(\frac{i}{2}){\ensuremath{\Sigma}}_{j}[W({\stackrel{\ensuremath{\rightarrow}}{\mathrm{r}}}_{j}){T}_{j}(\stackrel{\ensuremath{\rightarrow}}{\mathrm{a}})\ensuremath{-}W({\stackrel{\ensuremath{\rightarrow}}{\mathrm{r}}}_{j}^{\ensuremath{'}}){T}_{j}(\ensuremath{-}\stackrel{\ensuremath{\rightarrow}}{\mathrm{a}})]$, $W({\stackrel{\ensuremath{\rightarrow}}{\mathrm{r}}}_{j})=\ensuremath{\delta}({\stackrel{\ensuremath{\rightarrow}}{\mathrm{r}}}_{j}\ensuremath{-}\stackrel{\ensuremath{\rightarrow}}{\mathrm{r}})$, ${T}_{j}(\stackrel{\ensuremath{\rightarrow}}{\mathrm{a}})$ is a translation operator, and $\stackrel{\ensuremath{\rightarrow}}{\mathrm{a}}={\stackrel{\ensuremath{\rightarrow}}{\mathrm{r}}}^{\ensuremath{'}}\ensuremath{-}\stackrel{\ensuremath{\rightarrow}}{\mathrm{r}}$, is the reduced single-particle density matrix. For a given choice of a Slater-determinant-type trial wave function it is shown that the density matrix may be obtained from the charge density of the system where the latter too is determined via the same formalism to second order as the expectation value of the operator
W employing the same system trial wave function. The applicability of the technique is then demonstrated by showing that for the model hydrogen-atom problem it leads to highly accurate results for the momentum density and the Compton profile in the impulse approximation, and that the virial theorem is closely satisfied, even when the calculations of the various properties employing an approximate trial wave function alone are substantially in error.
Abstract The spin-independent properties of an electronic system are completely determined by spinless density functions, P1(1; 1') and P 2( 1,2; 1',2 '), derived from the 1-and 2-electron density matrices, p1(1; 1') and p2(1,2 ; 1',2'). These functions, and their physical inter-pretation, have been dealt with in part I: the present paper contains the generalizations necessary when the Hamiltonian contains spin terms (as in discussions of electron and nuclear spin resonance). The density matrices, and more generally the transition density matrices p1(kλ|1; 1') and p2(kλ|l,2; 1',2') associated with states and Φkand Φλ are resolved into spinless components associated with different spin situations: p1 has four such components (one giving the density of a-spin electrons, a second the density of β-spin electrons, and two with less direct physical significance), while p2 has sixteen components. It is shown that all components, for states k=(S, M),λ= (S',M') of given S, S', are determined by three 2-electron functions.For k=λ these reduce to p2, the spinless pair function, from which the electron density p1 may be derived by integration; Q2a ‘conditional' spin density, from which the (1-electron) spin density Q1 may be derived (as in the case of p1 and P2); Q c. a., a ‘coupling anisotropy function', which describes the anisotropy of spin-spin coupling associated with quantization of the spin z-component. It is also useful to introduce (though it is not an independent function). Qc, a ‘coupling density function', which measures the coupling between the spins of two electrons at different points in space. All spin-dependent effects, including the usual spin-spin and spin-orbit couplings and also (indirect) nuclear and electron-nuclear spin-spin couplings, may be related to the many- electron wave function through the above density functions. All the densities have a physical interpretation, independent of the precise nature of the wave functions (which may, for example, be the exact eigenfunctions of a spinless Hamiltonian or merely approximations of orbital form). The derivation of the density functions from approximate wave functions is considered in some detail. For functions describing weakly coupled electron groups (e. g. inner-shell and valence electrons) the densities may be expressed in terms of those of the separate groups. This reduction may be followed by an orbital description of each group; and subsequently, by a linear-combination-of-atomic-orbitals (l. c. a. o.) approximation. In the simpler approximations, all the coupling effects discussed are determined by electron and spin ‘populations'. Preliminary calculations suggest that such approximations may in many cases be adequate.
In dealing with systems whose eigenstates are known, such as ideal spin systems in a magnetic field, it is sometimes useful to introduce a formalism involving the density matrix. Knowledge of the density matrix operator permits the expectation values of other operators to be determined in a way that is straightforward in principle. In the presence of a magnetic field or some other polarizing mechanism, the form of the density matrix will change, and the expectation value, for example, may be nonzero. Although the situation that has been considered involves an electron beam, a related but somewhat more complicated approach is used for polarized light beams.
We present three different matrix bases that can be used to decompose density matrices of d -dimensional quantum systems, so-called qudits: the generalized Gell–Mann matrix basis , the polarization operator basis and the Weyl operator basis . Such a decomposition can be identified with a vector—the Bloch vector, i.e. a generalization of the well-known qubit case—and is a convenient expression for comparison with measurable quantities and for explicit calculations avoiding the handling of large matrices. We present a new method to decompose density matrices via so-called standard matrices, consider the important case of an isotropic two-qudit state and decompose it according to each basis. In the case of qutrits we show a representation of an entanglement witness in terms of expectation values of spin-1 measurements, which is appropriate for an experimental realization.