Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1408.5868

Near exact excited states of the carbon dimer in a quadruple-zeta basis using a general non-Abelian density matrix renormalization group algorithm

Sandeep Sharma

Published Aug 25, 2014• 2 citations
arXivHTMLPDF

Abstract

We extend our previous work [J. Chem. Phys, \textbf{136}, 124121], which described a spin-adapted (SU(2) symmetry) density matrix renormalization group (DMRG) algorithm, to additionally utilize general non-Abelian point group symmetries. A key strength of the present formulation is that the requisite tensor operators are not hard-coded for each symmetry group, but are instead generated on the fly using the appropriate Clebsch-Gordan coefficients. This allows our single implementation to easily enable (or disable) any non-Abelian point group symmetry (including SU(2) spin symmetry). We use our implementation to compute the ground state potential energy curve of the C$_2$ dimer in the cc-pVQZ basis set (with a frozen-core), corresponding to a Hilbert space dimension of 10$^{12}$ many-body states. While our calculated energy lies within the 0.3 mE$_h$ error bound of previous initiator full configuration interaction quantum Monte Carlo (i-FCIQMC) and correlation energy extrapolation by intrinsic scaling (CEEIS) calculations, our estimated residual error is only 0.01 mE$_h$, much more accurate than these previous estimates. Further, due to the additional efficiency afforded by the algorithm, we compute the potential energy curves of twelve states: the three lowest levels for each of the irreducible representations $^1Σ^+_g$, $^1Σ^+_u$, $^1Σ^-_g$ and $^1Σ^-_u$, to an estimated accuracy within 0.1 mE$_h$ of the exact result in this basis.

DOI
10.48550/arxiv.1408.5868

Related papers

A general non-Abelian density matrix renormalization group algorithm with application to the C2 dimer

Sandeep Sharma

We extend our previous work [S. Sharma and G. K.-L. Chan, J. Chem. Phys. 136, 124121 (2012)], which described a spin-adapted (SU(2) symmetry) density matrix renormalization group algorithm, to additionally utilize general non-Abelian point group symmetries. A key strength of the present formulation is that the requisite tensor operators are not hard-coded for each symmetry group, but are instead generated on the fly using the appropriate Clebsch-Gordan coefficients. This allows our single implementation to easily enable (or disable) any non-Abelian point group symmetry (including SU(2) spin symmetry). We use our implementation to compute the ground state potential energy curve of the C2 dimer in the cc-pVQZ basis set (with a frozen-core), corresponding to a Hilbert space dimension of 10(12) many-body states. While our calculated energy lies within the 0.3 mEh error bound of previous initiator full configuration interaction quantum Monte Carlo and correlation energy extrapolation by intrinsic scaling calculations, our estimated residual error is only 0.01 mEh, much more accurate than these previous estimates. Due to the additional efficiency afforded by the algorithm, the excitation energies (Te) of eight lowest lying excited states: a(3)Πu, b(3)Σg (-), A(1)Πu, c(3)Σu (+), B(1)Δg, B(') (1)Σg (+), d(3)Πg, and C(1)Πg are calculated, which agree with experimentally derived values to better than 0.06 eV. In addition, we also compute the potential energy curves of twelve states: the three lowest levels for each of the irreducible representations (1)Σg (+), (1)Σu (+), (1)Σg (-), and (1)Σu (-), to an estimated accuracy of 0.1 mEh of the exact result in this basis.

The Journal of Chemical Physics•Jan 9, 2015•36 citations

Breaking the carbon dimer: The challenges of multiple bond dissociation with full configuration interaction quantum Monte Carlo methods

George H. Booth, Deidre M. Cleland, Alex J. W. Thom +1 more

The full configuration interaction quantum Monte Carlo (FCIQMC) method, as well as its "initiator" extension (i-FCIQMC), is used to tackle the complex electronic structure of the carbon dimer across the entire dissociation reaction coordinate, as a prototypical example of a strongly correlated molecular system. Various basis sets of increasing size up to the large cc-pVQZ are used, spanning a fully accessible N-electron basis of over 10(12) Slater determinants, and the accuracy of the method is demonstrated in each basis set. Convergence to the FCI limit is achieved in the largest basis with only O[10(7)] walkers within random errorbars of a few tenths of a millihartree across the binding curve, and extensive comparisons to FCI, CCSD(T), MRCI, and CEEIS results are made where possible. A detailed exposition of the convergence properties of the FCIQMC methods is provided, considering convergence with elapsed imaginary time, number of walkers and size of the basis. Various symmetries which can be incorporated into the stochastic dynamic, beyond the standard abelian point group symmetry and spin polarisation are also described. These can have significant benefit to the computational effort of the calculations, as well as the ability to converge to various excited states. The results presented demonstrate a new benchmark accuracy in basis-set energies for systems of this size, significantly improving on previous state of the art estimates.

The Journal of Chemical Physics•Aug 22, 2011•154 citations

An excited-state approach within full configuration interaction quantum Monte Carlo

Nick S. Blunt, Simon D. Smart, George H. Booth +1 more

We present a new approach to calculate excited states with the full configuration interaction quantum Monte Carlo (FCIQMC) method. The approach uses a Gram-Schmidt procedure, instantaneously applied to the stochastically evolving distributions of walkers, to orthogonalize higher energy states against lower energy ones. It can thus be used to study several of the lowest-energy states of a system within the same symmetry. This additional step is particularly simple and computationally inexpensive, requiring only a small change to the underlying FCIQMC algorithm. No trial wave functions or partitioning of the space is needed. The approach should allow excited states to be studied for systems similar to those accessible to the ground-state method due to a comparable computational cost. As a first application, we consider the carbon dimer in basis sets up to quadruple-zeta quality and compare to existing results where available.

arXiv:1508.04680•The Journal of Chemical Physics•Oct 7, 2015•96 citations

Symmetrized density matrix renormalization group algorithm for low-lying excited states of conjugated carbon systems: Application to 1,12-benzoperylene and polychrysene

Suryoday Prodhan, S. Ramasesha

The symmetry adapted density matrix renormalization group (SDMRG) technique has been an efficient method for studying low-lying eigenstates in one- and quasi-one-dimensional electronic systems. However, the SDMRG method had bottlenecks involving the construction of linearly independent symmetry adapted basis states as the symmetry matrices in the DMRG basis were not sparse. We have developed a modified algorithm to overcome this bottleneck. The new method incorporates end-to-end interchange symmetry $({C}_{2})$, electron-hole symmetry $(J)$, and parity or spin-flip symmetry $(P)$ in these calculations. The one-to-one correspondence between direct-product basis states in the DMRG Hilbert space for these symmetry operations renders the symmetry matrices in the new basis with maximum sparseness, just one nonzero matrix element per row. Using methods similar to those employed in the exact diagonalization technique for Pariser-Parr-Pople (PPP) models, developed in the 1980s, it is possible to construct orthogonal SDMRG basis states while bypassing the slow step of the Gram-Schmidt orthonormalization procedure. The method together with the PPP model which incorporates long-range electronic correlations is employed to study the correlated excited-state spectra of 1,12-benzoperylene and a narrow mixed graphene nanoribbon with a chrysene molecule as the building unit, comprising both zigzag and cove-edge structures.

Physical review. B./Physical review. B•May 14, 2018•12 citations

High-performance ab initio density matrix renormalization group method: Applicability to large-scale multireference problems for metal compounds

Yuki Kurashige, Takeshi Yanai

This article presents an efficient and parallelized implementation of the density matrix renormalization group (DMRG) algorithm for quantum chemistry calculations. The DMRG method as a large-scale multireference electronic structure model is by nature particularly efficient for one-dimensionally correlated systems, while the present development is oriented toward applications for polynuclear transition metal compounds, in which the macroscopic one-dimensional structure of electron correlation is absent. A straightforward extension of the DMRG algorithm is proposed with further improvements and aggressive optimizations to allow its application with large multireference active space, which is often demanded for metal compound calculations. Special efficiency is achieved by making better use of sparsity and symmetry in the operator and wave function representations. By accomplishing computationally intensive DMRG calculations, the authors have found that a large number of renormalized basis states are required to represent high entanglement of the electron correlation for metal compound applications, and it is crucial to adopt auxiliary perturbative correction to the projected density matrix during the DMRG sweep optimization in order to attain proper convergence to the solution. Potential energy curve calculations for the Cr(2) molecule near the known equilibrium precisely predicted the full configuration interaction energies with a correlation space of 24 electrons in 30 orbitals [denoted by (24e,30o)]. The energies are demonstrated to be accurate to 0.6mE(h) (the error from the extrapolated best value) when as many as 10,000 renormalized basis states are employed for the left and right DMRG block representations. The relative energy curves for [Cu(2)O(2)](2+) along the isomerization coordinate were obtained from DMRG and other correlated calculations, for which a fairly large orbital space (32e,62o) is modeled as a full correlation space. The DMRG prediction nearly overlaps with the energy curve from the coupled cluster with singles, doubles, and perturbative triple [CCSD(T)] calculations, while the multireference complete active space self-consistent field (CASSCF) calculations with the small reference configuration (8e,8o) are found to overestimate the biradical character of the electronic state of [Cu(2)O(2)](2+) according to the one-electron density matrix analysis.

The Journal of Chemical Physics•Jun 19, 2009•190 citations

Density matrix renormalization group simulations of the SU( N ) Fermi-Hubbard chain implementing the full SU( N ) symmetry via semistandard Young tableaux and unitary group subduction coefficients

Pierre Nataf

We have developed an efficient method for performing density matrix renormalization group (DMRG) simulations of the SU($N$) Fermi-Hubbard chain, fully leveraging the SU($N$) symmetry of the problem. This method extends a previously developed approach for the SU($N$) Heisenberg model and relies on the systematic use of the semistandard Young tableaux (SSYT) basis in a DMRG algorithm ``\`a la White.'' Specifically, the method aligns the site-by-site growth process of the infinite-size part of the DMRG, in its original formulation, with the site-by-site construction of the SSYT (or Gelfand-like) basis, based on the chain of unitary subgroups $U(1)\ensuremath{\subset}U(2)\ensuremath{\subset}U(3)\ensuremath{\subset}U(4)\ensuremath{\cdots}$. We give special emphasis to the calculation of the symmetry-resolved reduced matrix elements of the hopping terms between the left and the right block, which makes direct use of the basis of SSYT and of the Gelfand-Tsetlin coefficients, offering a computational advantage in scaling with $N$ compared to alternative methods that rely on summing over Clebsch-Gordan coefficients. Focusing on the model with homogeneous hopping between nearest neighbors, we have calculated the ground-state energy as a function of $U$, i.e., the atom-atom interaction amplitude, up to $N=6$ for filling $1/N$ (one particle per site in average), and for one atom (respectively, hole) away from filling $1/N$. It allows us to compute the charge gaps and to estimate in the thermodynamical limit, the critical value ${U}_{c}$ (separating the Mott insulator from the metallic phase), which is proved to be finite (i.e., ${U}_{c}>0$) and to increase with $N$. Central charges $c$ are also extracted from the entanglement entropy using the Calabrese-Cardy formula and are consistent with the theoretical predictions: $c=N\ensuremath{-}1$, expected from the $\mathrm{SU}{(N)}_{1}$ Wess-Zumino-Witten conformal field theory in the spin sector for the Mott phase, and $c=N$ in the metallic phase, reflecting the presence of one additional (charge) gapless critical mode.

arXiv:2412.13320•Physical review. B./Physical review. B•May 27, 2025•2 citations
We extend our previous work [J. Chem. Phys, \textbf{136}, 124121], which described a spin-adapted (SU(2) symmetry) density matrix renormalization group (DMRG) algorithm, to additionally utilize general non-Abelian point group symmetries. A key strength of the present formulation is that the requisite tensor operators are not hard-coded for each symmetry group, but are instead generated on the fly using the appropriate Clebsch-Gordan coefficients. This allows our single implementation to easily enable (or disable) any non-Abelian point group symmetry (including SU(2) spin symmetry). We use our implementation to compute the ground state potential energy curve of the C2_22​ dimer in the cc-pVQZ basis set (with a frozen-core), corresponding to a Hilbert space dimension of 1012^{12}12 many-body states. While our calculated energy lies within the 0.3 mEh_hh​ error bound of previous initiator full configuration interaction quantum Monte Carlo (i-FCIQMC) and correlation energy extrapolation by intrinsic scaling (CEEIS) calculations, our estimated residual error is only 0.01 mEh_hh​, much more accurate than these previous estimates. Further, due to the additional efficiency afforded by the algorithm, we compute the potential energy curves of twelve states: the three lowest levels for each of the irreducible representations 1Σg+^1Σ^+_g1Σg+​, 1Σu+^1Σ^+_u1Σu+​, 1Σg−^1Σ^-_g1Σg−​ and 1Σu−^1Σ^-_u1Σu−​, to an estimated accuracy within 0.1 mEh_hh​ of the exact result in this basis.
We extend our previous work [S. Sharma and G. K.-L. Chan, J. Chem. Phys. 136, 124121 (2012)], which described a spin-adapted (SU(2) symmetry) density matrix renormalization group algorithm, to additionally utilize general non-Abelian point group symmetries. A key strength of the present formulation is that the requisite tensor operators are not hard-coded for each symmetry group, but are instead generated on the fly using the appropriate Clebsch-Gordan coefficients. This allows our single implementation to easily enable (or disable) any non-Abelian point group symmetry (including SU(2) spin symmetry). We use our implementation to compute the ground state potential energy curve of the C2 dimer in the cc-pVQZ basis set (with a frozen-core), corresponding to a Hilbert space dimension of 10(12) many-body states. While our calculated energy lies within the 0.3 mEh error bound of previous initiator full configuration interaction quantum Monte Carlo and correlation energy extrapolation by intrinsic scaling calculations, our estimated residual error is only 0.01 mEh, much more accurate than these previous estimates. Due to the additional efficiency afforded by the algorithm, the excitation energies (Te) of eight lowest lying excited states: a(3)Πu, b(3)Σg (-), A(1)Πu, c(3)Σu (+), B(1)Δg, B(') (1)Σg (+), d(3)Πg, and C(1)Πg are calculated, which agree with experimentally derived values to better than 0.06 eV. In addition, we also compute the potential energy curves of twelve states: the three lowest levels for each of the irreducible representations (1)Σg (+), (1)Σu (+), (1)Σg (-), and (1)Σu (-), to an estimated accuracy of 0.1 mEh of the exact result in this basis.
The full configuration interaction quantum Monte Carlo (FCIQMC) method, as well as its "initiator" extension (i-FCIQMC), is used to tackle the complex electronic structure of the carbon dimer across the entire dissociation reaction coordinate, as a prototypical example of a strongly correlated molecular system. Various basis sets of increasing size up to the large cc-pVQZ are used, spanning a fully accessible N-electron basis of over 10(12) Slater determinants, and the accuracy of the method is demonstrated in each basis set. Convergence to the FCI limit is achieved in the largest basis with only O[10(7)] walkers within random errorbars of a few tenths of a millihartree across the binding curve, and extensive comparisons to FCI, CCSD(T), MRCI, and CEEIS results are made where possible. A detailed exposition of the convergence properties of the FCIQMC methods is provided, considering convergence with elapsed imaginary time, number of walkers and size of the basis. Various symmetries which can be incorporated into the stochastic dynamic, beyond the standard abelian point group symmetry and spin polarisation are also described. These can have significant benefit to the computational effort of the calculations, as well as the ability to converge to various excited states. The results presented demonstrate a new benchmark accuracy in basis-set energies for systems of this size, significantly improving on previous state of the art estimates.
We present a new approach to calculate excited states with the full configuration interaction quantum Monte Carlo (FCIQMC) method. The approach uses a Gram-Schmidt procedure, instantaneously applied to the stochastically evolving distributions of walkers, to orthogonalize higher energy states against lower energy ones. It can thus be used to study several of the lowest-energy states of a system within the same symmetry. This additional step is particularly simple and computationally inexpensive, requiring only a small change to the underlying FCIQMC algorithm. No trial wave functions or partitioning of the space is needed. The approach should allow excited states to be studied for systems similar to those accessible to the ground-state method due to a comparable computational cost. As a first application, we consider the carbon dimer in basis sets up to quadruple-zeta quality and compare to existing results where available.
The symmetry adapted density matrix renormalization group (SDMRG) technique has been an efficient method for studying low-lying eigenstates in one- and quasi-one-dimensional electronic systems. However, the SDMRG method had bottlenecks involving the construction of linearly independent symmetry adapted basis states as the symmetry matrices in the DMRG basis were not sparse. We have developed a modified algorithm to overcome this bottleneck. The new method incorporates end-to-end interchange symmetry (C2)({C}_{2})(C2​), electron-hole symmetry (J)(J)(J), and parity or spin-flip symmetry (P)(P)(P) in these calculations. The one-to-one correspondence between direct-product basis states in the DMRG Hilbert space for these symmetry operations renders the symmetry matrices in the new basis with maximum sparseness, just one nonzero matrix element per row. Using methods similar to those employed in the exact diagonalization technique for Pariser-Parr-Pople (PPP) models, developed in the 1980s, it is possible to construct orthogonal SDMRG basis states while bypassing the slow step of the Gram-Schmidt orthonormalization procedure. The method together with the PPP model which incorporates long-range electronic correlations is employed to study the correlated excited-state spectra of 1,12-benzoperylene and a narrow mixed graphene nanoribbon with a chrysene molecule as the building unit, comprising both zigzag and cove-edge structures.
This article presents an efficient and parallelized implementation of the density matrix renormalization group (DMRG) algorithm for quantum chemistry calculations. The DMRG method as a large-scale multireference electronic structure model is by nature particularly efficient for one-dimensionally correlated systems, while the present development is oriented toward applications for polynuclear transition metal compounds, in which the macroscopic one-dimensional structure of electron correlation is absent. A straightforward extension of the DMRG algorithm is proposed with further improvements and aggressive optimizations to allow its application with large multireference active space, which is often demanded for metal compound calculations. Special efficiency is achieved by making better use of sparsity and symmetry in the operator and wave function representations. By accomplishing computationally intensive DMRG calculations, the authors have found that a large number of renormalized basis states are required to represent high entanglement of the electron correlation for metal compound applications, and it is crucial to adopt auxiliary perturbative correction to the projected density matrix during the DMRG sweep optimization in order to attain proper convergence to the solution. Potential energy curve calculations for the Cr(2) molecule near the known equilibrium precisely predicted the full configuration interaction energies with a correlation space of 24 electrons in 30 orbitals [denoted by (24e,30o)]. The energies are demonstrated to be accurate to 0.6mE(h) (the error from the extrapolated best value) when as many as 10,000 renormalized basis states are employed for the left and right DMRG block representations. The relative energy curves for [Cu(2)O(2)](2+) along the isomerization coordinate were obtained from DMRG and other correlated calculations, for which a fairly large orbital space (32e,62o) is modeled as a full correlation space. The DMRG prediction nearly overlaps with the energy curve from the coupled cluster with singles, doubles, and perturbative triple [CCSD(T)] calculations, while the multireference complete active space self-consistent field (CASSCF) calculations with the small reference configuration (8e,8o) are found to overestimate the biradical character of the electronic state of [Cu(2)O(2)](2+) according to the one-electron density matrix analysis.
We have developed an efficient method for performing density matrix renormalization group (DMRG) simulations of the SU(NNN) Fermi-Hubbard chain, fully leveraging the SU(NNN) symmetry of the problem. This method extends a previously developed approach for the SU(NNN) Heisenberg model and relies on the systematic use of the semistandard Young tableaux (SSYT) basis in a DMRG algorithm ``\`a la White.'' Specifically, the method aligns the site-by-site growth process of the infinite-size part of the DMRG, in its original formulation, with the site-by-site construction of the SSYT (or Gelfand-like) basis, based on the chain of unitary subgroups $U(1)\ensuremath{\subset}U(2)\ensuremath{\subset}U(3)\ensuremath{\subset}U(4)\ensuremath{\cdots}$. We give special emphasis to the calculation of the symmetry-resolved reduced matrix elements of the hopping terms between the left and the right block, which makes direct use of the basis of SSYT and of the Gelfand-Tsetlin coefficients, offering a computational advantage in scaling with NNN compared to alternative methods that rely on summing over Clebsch-Gordan coefficients. Focusing on the model with homogeneous hopping between nearest neighbors, we have calculated the ground-state energy as a function of UUU, i.e., the atom-atom interaction amplitude, up to N=6N=6N=6 for filling 1/N1/N1/N (one particle per site in average), and for one atom (respectively, hole) away from filling 1/N1/N1/N. It allows us to compute the charge gaps and to estimate in the thermodynamical limit, the critical value Uc{U}_{c}Uc​ (separating the Mott insulator from the metallic phase), which is proved to be finite (i.e., Uc>0{U}_{c}>0Uc​>0) and to increase with NNN. Central charges ccc are also extracted from the entanglement entropy using the Calabrese-Cardy formula and are consistent with the theoretical predictions: $c=N\ensuremath{-}1$, expected from the SU(N)1\mathrm{SU}{(N)}_{1}SU(N)1​ Wess-Zumino-Witten conformal field theory in the spin sector for the Mott phase, and c=Nc=Nc=N in the metallic phase, reflecting the presence of one additional (charge) gapless critical mode.