Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1407.4769 · Applied Physics Letters

Characterization and reduction of microfabrication-induced decoherence in superconducting quantum circuits

Chris Quintana, A. Megrant, Z. Chen, A. Dunsworth, B. Chiaro, R. Barends, B. Campbell, Yu Chen, I.-C. Hoi, Evan R. Jeffrey, J. Kelly, J. Mutus, P. J. J. O’Malley, C. Neill, P. Roushan, D. Sank, A. Vainsencher, J. Wenner, T. White, Andrew N. Cleland, John M. Martinis

Published Aug 11, 2014• 128 citations
arXivHTMLPDF

Abstract

Many superconducting qubits are highly sensitive to dielectric loss, making the fabrication of coherent quantum circuits challenging. To elucidate this issue, we characterize the interfaces and surfaces of superconducting coplanar waveguide resonators and study the associated microwave loss. We show that contamination induced by traditional qubit lift-off processing is particularly detrimental to quality factors without proper substrate cleaning, while roughness plays at most a small role. Aggressive surface treatment is shown to damage the crystalline substrate and degrade resonator quality. We also introduce methods to characterize and remove ultra-thin resist residue, providing a way to quantify and minimize remnant sources of loss on device surfaces.

DOI
10.1063/1.4893297

Related papers

Substrate surface engineering for high-quality silicon/aluminum superconducting resonators

C T Earnest, J. H. Béjanin, T G McConkey +4 more

Abstract Quantum bits (qubits) with long coherence times are an important element for the implementation of medium- and large-scale quantum computers. In the case of superconducting planar qubits, understanding and improving qubits’ quality can be achieved by studying superconducting planar resonators. In this paper, we fabricate and characterize coplanar waveguide resonators made from aluminum thin films deposited on silicon substrates. We perform three different substrate surface treatments prior to aluminum deposition: one chemical treatment based on a hydrofluoric acid clean; one physical treatment consisting of a thermal annealing at 880 °C in high vacuum; and one combined treatment comprising both the chemical and the physical treatments. The aim of these treatments is to remove the two-level state (TLS) defects hosted by the native oxides residing at the various samples’ interfaces. We first characterize the fabricated samples through cross-sectional tunneling electron microscopy, acquiring electron energy loss spectroscopy maps of the samples’ cross sections. These measurements show that both the chemical and the physical treatments almost entirely remove native silicon oxide from the substrate surface and that their combination results in the cleanest interface. Additionally, we analyze the effects of the various substrate treatments on the roughness of the silicon surface by means of atomic force microscopy surface morphology mapping. We then study the quality of the resonators by means of microwave measurements in the ‘quantum regime’, i.e., at a temperature T ∼ 10 mK and at a mean microwave photon number 〈 n ph 〉 ∼ 1 . In this regime, we find that both surface treatments independently improve the resonator’s intrinsic quality factor by ≈172%. The highest quality factor is obtained for the combined treatment, Q i ≈ 0.82 million, corresponding to an improvement by ≈256%. Finally, we find that the TLS quality factor averaged over a time period of 3 h is ∼3 million at 〈 n ph 〉 ∼ 10 , indicating that substrate surface engineering can potentially reduce the TLS loss below other losses such as quasiparticle loss and flux noise.

arXiv:1807.08072•Superconductor Science and Technology•Oct 1, 2018•77 citations

Substrate and process dependent losses in superconducting thin film resonators

Wei Chen, D. A. Bennett, Vijay Patel +1 more

We measured the quality factor (Q) and hence the losses of thin film superconducting Nb coplanar waveguide resonators fabricated with processes and materials similar to those used for Josephson effect qubits, where such losses can cause significant decoherence. Intrinsic Q-values range from several thousand to almost 106 depending on the process details. Reactive ion etching appears to reduce the resonator Q-values and the lift-off process can also degrade the Q-value for some resists. The resistivity of the Si substrates affects the intrinsic Q at 1 K, where the resonators were measured. The Q-values obtained for optimized processing are sufficiently high as to suggest that qubits fabricated by a similar technique would not be limited by losses associated with the film or substrate.

Superconductor Science and Technology•May 6, 2008•52 citations

Characterization of process-related interfacial dielectric loss in aluminum-on-silicon by resonator microwave measurements, materials analysis, and imaging

Lert Chayanun, Janka Biznárová, Lunjie J. Zeng +10 more

We systematically investigate the influence of the fabrication process on dielectric loss in aluminum-on-silicon superconducting coplanar waveguide resonators with internal quality factors (Qi) of about one million at the single-photon level. These devices are essential components in superconducting quantum processors; they also serve as proxies for understanding the energy loss of superconducting qubits. By systematically varying several fabrication steps, we identify the relative importance of reducing loss at the substrate–metal and substrate–air interfaces. We find that it is essential to clean the silicon substrate in hydrogen fluoride (HF) prior to aluminum deposition. A post-fabrication removal of the oxides on the surface of the silicon substrate and the aluminum film by immersion in HF further improves the Qi. We observe a small, but noticeable, adverse effect on the loss by omitting either standard cleaning (SC1), pre-deposition heating of the substrate to 300 °C, or in situ post-deposition oxidation of the film’s top surface. We find no improvement due to excessive pumping meant to reach a background pressure below 6 × 10−8 mbar. We correlate the measured loss with microscopic properties of the substrate–metal interface through characterization with x-ray photoelectron spectroscopy, time-of-flight secondary ion mass spectrometry, transmission electron microscopy, energy-dispersive x-ray spectroscopy, and atomic force microscopy.

arXiv:2403.00723•APL Quantum•Jun 1, 2024•15 citations

Optimizing Interface Dielectric Loss in Superconducting Coplanar Waveguide Resonators for Improved Quantum Circuit Coherence

Omar A. Saleh, Saleem G. Rao, Mohammed Alghadeer +2 more

Superconducting quantum computing systems, including coplanar waveguide (CPW) resonators and qubits, are highly susceptible to energy dissipation from two-level systems (TLS) within bulk and interfacial dielectrics. CPW resonators serve as an ideal platform for characterizing these material losses at the single-photon excitation level. Building on recent experimental evidence that interface engineering can mitigate TLS losses, this study employs simulations to evaluate resonator quality factors across various interface modifications. Our results demonstrate that reducing losses at the substrate–air (SA) interface can increase the internal quality factor Qi by up to three orders of magnitude. While etching the SA interface also enhances Qi, material loss remains the dominant dissipation mechanism. Furthermore, we find that other lossy interfaces have a significantly smaller impact on the quality factor compared to the SA interface. These simulation results align with established experimental findings, providing a robust framework for refining resonator design. This work offers precise guidelines for TLS mitigation, essential for enhancing coherence times and developing more reliable superconducting quantum processors.

Technologies•Feb 18, 2026•0 citations

Surface Passivation of Niobium Superconducting Quantum Circuits Using Self-Assembled Monolayers

Mohammed Alghadeer, Archan Banerjee, Ahmed Hajr +3 more

Superconducting coplanar waveguide (CPW) microwave resonators in quantum circuits are the best components for reading and changing the state of artificial atoms because of their excellent coupling to quantum systems. This coupling forms the basis of the developing circuit quantum electrodynamic architecture. In quantum processors, oscillators are used to store and transmit quantum information using microwave-frequency wave packets. However, the presence of amorphous thin-film defects is deleterious and can result in an irrevocable loss of coherent information with uncontrolled degrees of freedom. Although there has been extensive research into techniques to reduce the coherent loss of such devices, the precise structure of amorphous dielectric layers on surfaces and interfaces and their associated loss mechanism are being actively studied. In particular, planar superconducting resonators are very sensitive to defects on their surfaces, such as two-level systems in oxidized metals and nonequilibrium quasiparticles, making these devices suitable probes for the different loss mechanisms. In this work, we present the design, fabrication, and characterization of Nb CPW resonators with different surface treatments with self-assembled monolayers (SAMs), which mitigate the growth of oxides in superconducting circuits. We demonstrate SAM-passivated resonators having internal quality factors of greater than 10 6 at a single-photon excitation power (measured at 100 mK), which were probed using scanning electron microscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy to demonstrate the efficiency of our surface treatment. Finally, we compared the improvements in the experimental quality factors to those obtained by numerical simulation.

ACS Applied Materials & Interfaces•Dec 27, 2022•21 citations

High-Q trenched aluminum coplanar resonators with an ultrasonic edge microcutting for superconducting quantum devices

E. V. Zikiy, A. I. Ivanov, Nikita S. Smirnov +7 more

Abstract Dielectric losses are one of the key factors limiting the coherence of superconducting qubits. The impact of materials and fabrication steps on dielectric losses can be evaluated using coplanar waveguide (CPW) microwave resonators. Here, we report on superconducting CPW microwave resonators with internal quality factors systematically exceeding 5 × 106 at high powers and 2 × 106 (with the best value of 4.4 × 106) at low power. Such performance is demonstrated for 100-nm-thick aluminum resonators with 7–10.5 um center trace on high-resistivity silicon substrates commonly used in Josephson-junction based quantum circuit. We investigate internal quality factors of the resonators with both dry and wet aluminum etching, as well as deep and isotropic reactive ion etching of silicon substrate. Josephson junction compatible CPW resonators fabrication process with both airbridges and silicon substrate etching is proposed. Finally, we demonstrate the effect of airbridges’ positions and extra process steps on the overall dielectric losses. The best quality factors are obtained for the wet etched aluminum resonators and isotropically removed substrate with the proposed ultrasonic metal edge microcutting.

arXiv:2306.16301•Scientific Reports•Sep 20, 2023•35 citations
Many superconducting qubits are highly sensitive to dielectric loss, making the fabrication of coherent quantum circuits challenging. To elucidate this issue, we characterize the interfaces and surfaces of superconducting coplanar waveguide resonators and study the associated microwave loss. We show that contamination induced by traditional qubit lift-off processing is particularly detrimental to quality factors without proper substrate cleaning, while roughness plays at most a small role. Aggressive surface treatment is shown to damage the crystalline substrate and degrade resonator quality. We also introduce methods to characterize and remove ultra-thin resist residue, providing a way to quantify and minimize remnant sources of loss on device surfaces.
Abstract Quantum bits (qubits) with long coherence times are an important element for the implementation of medium- and large-scale quantum computers. In the case of superconducting planar qubits, understanding and improving qubits’ quality can be achieved by studying superconducting planar resonators. In this paper, we fabricate and characterize coplanar waveguide resonators made from aluminum thin films deposited on silicon substrates. We perform three different substrate surface treatments prior to aluminum deposition: one chemical treatment based on a hydrofluoric acid clean; one physical treatment consisting of a thermal annealing at 880 °C in high vacuum; and one combined treatment comprising both the chemical and the physical treatments. The aim of these treatments is to remove the two-level state (TLS) defects hosted by the native oxides residing at the various samples’ interfaces. We first characterize the fabricated samples through cross-sectional tunneling electron microscopy, acquiring electron energy loss spectroscopy maps of the samples’ cross sections. These measurements show that both the chemical and the physical treatments almost entirely remove native silicon oxide from the substrate surface and that their combination results in the cleanest interface. Additionally, we analyze the effects of the various substrate treatments on the roughness of the silicon surface by means of atomic force microscopy surface morphology mapping. We then study the quality of the resonators by means of microwave measurements in the ‘quantum regime’, i.e., at a temperature T ∼ 10 mK and at a mean microwave photon number 〈 n ph 〉 ∼ 1 . In this regime, we find that both surface treatments independently improve the resonator’s intrinsic quality factor by ≈172%. The highest quality factor is obtained for the combined treatment, Q i ≈ 0.82 million, corresponding to an improvement by ≈256%. Finally, we find that the TLS quality factor averaged over a time period of 3 h is ∼3 million at 〈 n ph 〉 ∼ 10 , indicating that substrate surface engineering can potentially reduce the TLS loss below other losses such as quasiparticle loss and flux noise.
We measured the quality factor (Q) and hence the losses of thin film superconducting Nb coplanar waveguide resonators fabricated with processes and materials similar to those used for Josephson effect qubits, where such losses can cause significant decoherence. Intrinsic Q-values range from several thousand to almost 106 depending on the process details. Reactive ion etching appears to reduce the resonator Q-values and the lift-off process can also degrade the Q-value for some resists. The resistivity of the Si substrates affects the intrinsic Q at 1 K, where the resonators were measured. The Q-values obtained for optimized processing are sufficiently high as to suggest that qubits fabricated by a similar technique would not be limited by losses associated with the film or substrate.
We systematically investigate the influence of the fabrication process on dielectric loss in aluminum-on-silicon superconducting coplanar waveguide resonators with internal quality factors (Qi) of about one million at the single-photon level. These devices are essential components in superconducting quantum processors; they also serve as proxies for understanding the energy loss of superconducting qubits. By systematically varying several fabrication steps, we identify the relative importance of reducing loss at the substrate–metal and substrate–air interfaces. We find that it is essential to clean the silicon substrate in hydrogen fluoride (HF) prior to aluminum deposition. A post-fabrication removal of the oxides on the surface of the silicon substrate and the aluminum film by immersion in HF further improves the Qi. We observe a small, but noticeable, adverse effect on the loss by omitting either standard cleaning (SC1), pre-deposition heating of the substrate to 300 °C, or in situ post-deposition oxidation of the film’s top surface. We find no improvement due to excessive pumping meant to reach a background pressure below 6 × 10−8 mbar. We correlate the measured loss with microscopic properties of the substrate–metal interface through characterization with x-ray photoelectron spectroscopy, time-of-flight secondary ion mass spectrometry, transmission electron microscopy, energy-dispersive x-ray spectroscopy, and atomic force microscopy.
Superconducting quantum computing systems, including coplanar waveguide (CPW) resonators and qubits, are highly susceptible to energy dissipation from two-level systems (TLS) within bulk and interfacial dielectrics. CPW resonators serve as an ideal platform for characterizing these material losses at the single-photon excitation level. Building on recent experimental evidence that interface engineering can mitigate TLS losses, this study employs simulations to evaluate resonator quality factors across various interface modifications. Our results demonstrate that reducing losses at the substrate–air (SA) interface can increase the internal quality factor Qi by up to three orders of magnitude. While etching the SA interface also enhances Qi, material loss remains the dominant dissipation mechanism. Furthermore, we find that other lossy interfaces have a significantly smaller impact on the quality factor compared to the SA interface. These simulation results align with established experimental findings, providing a robust framework for refining resonator design. This work offers precise guidelines for TLS mitigation, essential for enhancing coherence times and developing more reliable superconducting quantum processors.
Superconducting coplanar waveguide (CPW) microwave resonators in quantum circuits are the best components for reading and changing the state of artificial atoms because of their excellent coupling to quantum systems. This coupling forms the basis of the developing circuit quantum electrodynamic architecture. In quantum processors, oscillators are used to store and transmit quantum information using microwave-frequency wave packets. However, the presence of amorphous thin-film defects is deleterious and can result in an irrevocable loss of coherent information with uncontrolled degrees of freedom. Although there has been extensive research into techniques to reduce the coherent loss of such devices, the precise structure of amorphous dielectric layers on surfaces and interfaces and their associated loss mechanism are being actively studied. In particular, planar superconducting resonators are very sensitive to defects on their surfaces, such as two-level systems in oxidized metals and nonequilibrium quasiparticles, making these devices suitable probes for the different loss mechanisms. In this work, we present the design, fabrication, and characterization of Nb CPW resonators with different surface treatments with self-assembled monolayers (SAMs), which mitigate the growth of oxides in superconducting circuits. We demonstrate SAM-passivated resonators having internal quality factors of greater than 10 6 at a single-photon excitation power (measured at 100 mK), which were probed using scanning electron microscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy to demonstrate the efficiency of our surface treatment. Finally, we compared the improvements in the experimental quality factors to those obtained by numerical simulation.
Abstract Dielectric losses are one of the key factors limiting the coherence of superconducting qubits. The impact of materials and fabrication steps on dielectric losses can be evaluated using coplanar waveguide (CPW) microwave resonators. Here, we report on superconducting CPW microwave resonators with internal quality factors systematically exceeding 5 × 106 at high powers and 2 × 106 (with the best value of 4.4 × 106) at low power. Such performance is demonstrated for 100-nm-thick aluminum resonators with 7–10.5 um center trace on high-resistivity silicon substrates commonly used in Josephson-junction based quantum circuit. We investigate internal quality factors of the resonators with both dry and wet aluminum etching, as well as deep and isotropic reactive ion etching of silicon substrate. Josephson junction compatible CPW resonators fabrication process with both airbridges and silicon substrate etching is proposed. Finally, we demonstrate the effect of airbridges’ positions and extra process steps on the overall dielectric losses. The best quality factors are obtained for the wet etched aluminum resonators and isotropically removed substrate with the proposed ultrasonic metal edge microcutting.