Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1407.3109 · Superconductor Science and Technology

Band-edge BCS–BEC crossover in a two-band superconductor: physical properties and detection parameters

Andrea Guidini, Andrea Perali

Published Oct 31, 2014• 66 citations
arXivHTMLPDF

Abstract

Superconductivity in iron-based, magnesium diborides, and other novel superconducting materials has a strong multi-band and multi-gap character. Recent experiments support the possibillity for a BCS-BEC crossover induced by strong-coupling and proximity of the chemical potential to the band edge of one of the bands. Here we study the simplest theoretical model which accounts for the BCS-BEC crossover in a two-band superconductor, considering tunable interactions and tunable energy separations between the bands. Mean-field results for condensate fraction, correlation length, and superconducting gap are reported in typical crossover diagrams to locate the boundaries of the BCS, crossover, and BEC regimes. When the superconducting gap is of the order of the local chemical potential, superconductivity is in the crossover regime of the BCS-BEC crossover and the Fermi surface of the small band is smeared by the gap opening. In this situation, small and large Cooper pairs coexist in the total condensate, which is the optimal condition for high-Tc superconductivity. The ratio between the gap and the Fermi energy in a given band results to be the best detection parameter for experiments to locate the system in the BCS-BEC crossover. Using available experimental data, our analysis shows that iron-based superconductors have the partial condensate of the small Fermi surface in the crossover regime of the BCS-BEC crossover, supporting the recent ARPES findings.

DOI
10.1088/0953-2048/27/12/124002

Related papers

BCS-BEC crossover induced by a shallow band: Pushing standard superconductivity types apart

Sebastian Wolf, Alexei Vagov, Arkady A Shanenko +3 more

The appearance of a shallow band(s) drives a superconductor towards the BCS-BEC crossover, conventionally associated with notable changes in single-particle properties and an elevated critical temperature. Here we demonstrate that the proximity to the crossover induced by a shallow band has also a dramatic effect on the phase diagram of the superconducting magnetic properties. When the system passes from the BCS to BEC regime, the intertype domain between superconductivity types I and II enlarges systematically, being inversely proportional to the square of the Cooper-pair radius, the main parameter that controls the BCS-BEC superconductivity. We also show that despite the presence of a shallow band, the condensate fluctuations are suppressed when it coexists in one material with standard deep bands, as in recent iron chalcogenides ${\mathrm{Fe}\mathrm{Se}}_{x}{\mathrm{Te}}_{1\ensuremath{-}x}$ and $\mathrm{FeSe}$.

Physical review. B./Physical review. B•Mar 30, 2017•21 citations

Sweeping across the BCS-BEC crossover, reentrant, and hidden quantum phase transitions in two-band superconductors by tuning the valence and conduction bands

Giovanni Midei, Andrea Perali

Two-band electronic structures with a valence and a conduction band separated by a tunable energy gap and with pairing of electrons in different channels can be relevant to investigate the properties of two-dimensional multiband superconductors and electron-hole superfluids, such as monolayer FeSe, recently discovered superconducting bilayer graphene, and double-bilayer graphene electron-hole systems. This electronic configuration also allows us to study the coexistence of superconductivity and charge-density waves in connection with underdoped cuprates and transition metal dichalcogenides. By using a mean-field approach to study the system mentioned above, we have obtained numerical results for superconducting gaps, chemical potential, condensate fractions, coherence lengths, and superconducting mean-field critical temperature, considering a tunable band gap and different fillings of the conduction band, for a parametric choice of the pairing interactions. By tuning these quantities, the electrons redistribute among valence and conduction band in a complex way, leading to a new physics with respect to single-band superconductors, such as density-induced and band-selective BCS-BEC crossover, quantum phase transitions, and hidden criticalities. At finite temperature, this phenomenon is also responsible for the nonmonotonic behavior of the superconducting gaps resulting in a superconducting-normal state reentrant transition, without the need of disorder or magnetic effects.

arXiv:2301.13795•Physical review. B./Physical review. B•May 2, 2023•11 citations

Phase diagram of a two-dimensional narrow-band nematic superconductor: Can the BCS–BEC crossover be observed?

В. М. Локтев, Volodymyr Turkowski

We have analyzed the doping and temperature dependencies of the physical properties of a square-lattice narrow-band superconductor with a relevant for systems with local Hubbard repulsion nematic pairing due to effective nearest-neighbor attraction. Our focus was a possible crossover of the system from the Bardeen–Cooper–Schrieffer (BCS) superconductivity to the Bose–Einstein condensation (BEC) regimes with increasing temperature. We have found that in the d-channel the crossover does not take place at realistic values of doping and temperature, and even at a large attraction, i.e., the system is always in the BCS regime, unlike the “usual” d-wave superconductor. Contrary to non-nematic d-wave superconductors, the chemical potential μ always grows with temperature increase that might indicate an unexpectedly large size of Cooper pairs. At the same time, in the s-channel, we have found a BCS–BEC crossover with temperature for a wide range of temperatures even at rather high dopings, nf ≈ 0.2. This result is different from the “usual” s-case, where a narrow-band (i.e., at strong coupling) system is always in the BEC state. We have found for a given large value of attraction that there is a value of doping when for a wide range of temperature the system is in a “pre-crossover” regime with μ ≈ 0, i.e., in a regime of coexistence of local and extended pairs. Thus, in narrow-band systems a “usual” s-superconductor is in a BEC state, but in the nematic case one can expect a BCS–to–BEC crossover with temperature growth at realistic system parameters, i.e., the crossover might be measured experimentally.

Low Temperature Physics•Apr 1, 2026•1 citation

Crossover from weak to strong coupling superconductivity in multi-band systems

Francisco Dinóla Neto, M. A. Contínentino, Claudine Lacroix

The study of superconductivity in correlated systems is an exciting area of condensed matter physics. In this paper we consider superconducting ground states in systems described by two-band models with different effective masses. These two bands are coupled through an effective hybridization that can be directly tuned by pressure. We consider the cases of s-wave superconductivity associated with the electrons in a narrow band and also with inter-band pairing. To study the system in the strong coupling regime we introduce the s-wave scattering length a(s), and obtain the superconducting order parameters and the chemical potential as functions of the interaction strength 1/k(F)a(s) along the BCS-BEC crossover at T = 0. Finally, we discuss the phase diagram of this model as a function of external pressure and how our results can be applied for two-band systems as Fe pnictides or heavy fermions. The main result of this study is the occurrence of a superconducting quantum critical point (SQCP) in this two-band model.

Journal of Physics Condensed Matter•Jan 29, 2010•9 citations

BCS-BEC crossover in a two-band superconductor with odd-parity hybridization

G. N. Bremm, M. A. Contínentino, Tobias Micklitz

We study the crossover from the weak coupling Bardeen-Cooper-Schrieffer (BCS) state to Bose-Einstein condensation (BEC) at strong coupling in a two-band superconductor with orbitals of opposite parity coexisting at a common Fermi surface in the metallic state. In such systems hybridization can play a role similar to spin-orbit interaction in fermionic spinor gases, enhancing interband pairing and opening the possibility for driving the BCS-BEC crossover. Building on a mean-field analysis, we investigate the BCS-BEC crossover induced by a variation of the hybridization strength. We show that the relevant scale for the crossover depends strongly on the ratio of effective masses, with the crossover favored in systems with one dispersive and one flat band. Including the effect of thermal pair fluctuations in a one-loop approximation, we calculate the dependence of the critical temperature on the microscopic parameters in the strong coupling regime.

Physical review. B./Physical review. B•Sep 16, 2021•4 citations

Superconductivity of the FeSe/SrTiO3 Interface in View of BCS–BEC Crossover*

Shuyuan Zhang, Guangyao Miao, Jiaqi Guan +6 more

In paired Fermi systems, strong many-body effects exhibit in the crossover regime between the Bardeen–Cooper–Schrieffer (BCS) and the Bose–Einstein condensation (BEC) limits. The concept of the BCS–BEC crossover, which is studied intensively in the research field of cold atoms, has been extended to condensed matters. Here by analyzing the typical superconductors within the BCS–BEC phase diagram, we find that FeSe-based superconductors are prone to shift their positions in the BCS–BEC crossover regime by charge doping or substrate substitution, since their Fermi energies and the superconducting gap sizes are comparable. Especially at the interface of single-layer FeSe on SrTiO 3 substrate, the superconductivity is relocated closer to the crossover unitary than other doped FeSe-based materials, indicating that the pairing interaction is effectively modulated. We further show that hole-doping can drive the interfacial system into the phase with possible pre-paired electrons, demonstrating its flexible tunability within the BCS–BEC crossover regime.

arXiv:1908.11126•Chinese Physics Letters•Oct 1, 2019•10 citations
Superconductivity in iron-based, magnesium diborides, and other novel superconducting materials has a strong multi-band and multi-gap character. Recent experiments support the possibillity for a BCS-BEC crossover induced by strong-coupling and proximity of the chemical potential to the band edge of one of the bands. Here we study the simplest theoretical model which accounts for the BCS-BEC crossover in a two-band superconductor, considering tunable interactions and tunable energy separations between the bands. Mean-field results for condensate fraction, correlation length, and superconducting gap are reported in typical crossover diagrams to locate the boundaries of the BCS, crossover, and BEC regimes. When the superconducting gap is of the order of the local chemical potential, superconductivity is in the crossover regime of the BCS-BEC crossover and the Fermi surface of the small band is smeared by the gap opening. In this situation, small and large Cooper pairs coexist in the total condensate, which is the optimal condition for high-Tc superconductivity. The ratio between the gap and the Fermi energy in a given band results to be the best detection parameter for experiments to locate the system in the BCS-BEC crossover. Using available experimental data, our analysis shows that iron-based superconductors have the partial condensate of the small Fermi surface in the crossover regime of the BCS-BEC crossover, supporting the recent ARPES findings.
The appearance of a shallow band(s) drives a superconductor towards the BCS-BEC crossover, conventionally associated with notable changes in single-particle properties and an elevated critical temperature. Here we demonstrate that the proximity to the crossover induced by a shallow band has also a dramatic effect on the phase diagram of the superconducting magnetic properties. When the system passes from the BCS to BEC regime, the intertype domain between superconductivity types I and II enlarges systematically, being inversely proportional to the square of the Cooper-pair radius, the main parameter that controls the BCS-BEC superconductivity. We also show that despite the presence of a shallow band, the condensate fluctuations are suppressed when it coexists in one material with standard deep bands, as in recent iron chalcogenides ${\mathrm{Fe}\mathrm{Se}}_{x}{\mathrm{Te}}_{1\ensuremath{-}x}$ and FeSe\mathrm{FeSe}FeSe.
Two-band electronic structures with a valence and a conduction band separated by a tunable energy gap and with pairing of electrons in different channels can be relevant to investigate the properties of two-dimensional multiband superconductors and electron-hole superfluids, such as monolayer FeSe, recently discovered superconducting bilayer graphene, and double-bilayer graphene electron-hole systems. This electronic configuration also allows us to study the coexistence of superconductivity and charge-density waves in connection with underdoped cuprates and transition metal dichalcogenides. By using a mean-field approach to study the system mentioned above, we have obtained numerical results for superconducting gaps, chemical potential, condensate fractions, coherence lengths, and superconducting mean-field critical temperature, considering a tunable band gap and different fillings of the conduction band, for a parametric choice of the pairing interactions. By tuning these quantities, the electrons redistribute among valence and conduction band in a complex way, leading to a new physics with respect to single-band superconductors, such as density-induced and band-selective BCS-BEC crossover, quantum phase transitions, and hidden criticalities. At finite temperature, this phenomenon is also responsible for the nonmonotonic behavior of the superconducting gaps resulting in a superconducting-normal state reentrant transition, without the need of disorder or magnetic effects.
We have analyzed the doping and temperature dependencies of the physical properties of a square-lattice narrow-band superconductor with a relevant for systems with local Hubbard repulsion nematic pairing due to effective nearest-neighbor attraction. Our focus was a possible crossover of the system from the Bardeen–Cooper–Schrieffer (BCS) superconductivity to the Bose–Einstein condensation (BEC) regimes with increasing temperature. We have found that in the d-channel the crossover does not take place at realistic values of doping and temperature, and even at a large attraction, i.e., the system is always in the BCS regime, unlike the “usual” d-wave superconductor. Contrary to non-nematic d-wave superconductors, the chemical potential μ always grows with temperature increase that might indicate an unexpectedly large size of Cooper pairs. At the same time, in the s-channel, we have found a BCS–BEC crossover with temperature for a wide range of temperatures even at rather high dopings, nf ≈ 0.2. This result is different from the “usual” s-case, where a narrow-band (i.e., at strong coupling) system is always in the BEC state. We have found for a given large value of attraction that there is a value of doping when for a wide range of temperature the system is in a “pre-crossover” regime with μ ≈ 0, i.e., in a regime of coexistence of local and extended pairs. Thus, in narrow-band systems a “usual” s-superconductor is in a BEC state, but in the nematic case one can expect a BCS–to–BEC crossover with temperature growth at realistic system parameters, i.e., the crossover might be measured experimentally.
The study of superconductivity in correlated systems is an exciting area of condensed matter physics. In this paper we consider superconducting ground states in systems described by two-band models with different effective masses. These two bands are coupled through an effective hybridization that can be directly tuned by pressure. We consider the cases of s-wave superconductivity associated with the electrons in a narrow band and also with inter-band pairing. To study the system in the strong coupling regime we introduce the s-wave scattering length a(s), and obtain the superconducting order parameters and the chemical potential as functions of the interaction strength 1/k(F)a(s) along the BCS-BEC crossover at T = 0. Finally, we discuss the phase diagram of this model as a function of external pressure and how our results can be applied for two-band systems as Fe pnictides or heavy fermions. The main result of this study is the occurrence of a superconducting quantum critical point (SQCP) in this two-band model.
We study the crossover from the weak coupling Bardeen-Cooper-Schrieffer (BCS) state to Bose-Einstein condensation (BEC) at strong coupling in a two-band superconductor with orbitals of opposite parity coexisting at a common Fermi surface in the metallic state. In such systems hybridization can play a role similar to spin-orbit interaction in fermionic spinor gases, enhancing interband pairing and opening the possibility for driving the BCS-BEC crossover. Building on a mean-field analysis, we investigate the BCS-BEC crossover induced by a variation of the hybridization strength. We show that the relevant scale for the crossover depends strongly on the ratio of effective masses, with the crossover favored in systems with one dispersive and one flat band. Including the effect of thermal pair fluctuations in a one-loop approximation, we calculate the dependence of the critical temperature on the microscopic parameters in the strong coupling regime.
In paired Fermi systems, strong many-body effects exhibit in the crossover regime between the Bardeen–Cooper–Schrieffer (BCS) and the Bose–Einstein condensation (BEC) limits. The concept of the BCS–BEC crossover, which is studied intensively in the research field of cold atoms, has been extended to condensed matters. Here by analyzing the typical superconductors within the BCS–BEC phase diagram, we find that FeSe-based superconductors are prone to shift their positions in the BCS–BEC crossover regime by charge doping or substrate substitution, since their Fermi energies and the superconducting gap sizes are comparable. Especially at the interface of single-layer FeSe on SrTiO 3 substrate, the superconductivity is relocated closer to the crossover unitary than other doped FeSe-based materials, indicating that the pairing interaction is effectively modulated. We further show that hole-doping can drive the interfacial system into the phase with possible pre-paired electrons, demonstrating its flexible tunability within the BCS–BEC crossover regime.