Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1404.5504 · Physical Review X

Single-Shot Fault-Tolerant Quantum Error Correction

Héctor Bombín

Published Sep 28, 2015• 191 citations
arXivHTMLPDF

Abstract

The goal of achieving quantum computation requires overcoming the limitation of quantum noise. A new approach shows how noisy local information about noise can be used to reliably correct errors for an ensemble of qubits on a lattice.
DOI
10.1103/physrevx.5.031043

Related papers

New methods in quantum error correction and fault-tolerant quantum computing

Christopher Chamberland

Quantum computers have the potential to solve several interesting problems in polynomial \ntime for which no polynomial time classical algorithms have been found. However, \none of the major challenges in building quantum devices is that quantum systems are very \nsensitive to noise arising from undesired interactions with the environment. Noise can lead \nto errors which can corrupt the results of the computation. Quantum error correction is \none way to mitigate the effects of noise arising in quantum devices. \nWith a plethora of quantum error correcting codes that can be used in various settings, \none of the main challenges of quantum error correction is understanding how well various \ncodes perform under more realistic noise models that can be observed in experiments. \nThis thesis proposes a new decoding algorithm which can optimize threshold values of \nerror correcting codes under different noise models. The algorithm can be applied to \nany Markovian noise model. Further, it is shown that for certain noise models, logical \nClifford corrections can further improve a code's threshold value if the code obeys certain \nsymmetries. \n \nSince gates and measurements cannot in general be performed with perfect precision, \nthe operations required to perform quantum error correction can introduce more errors \ninto the system thus negating the benefits of error correction. Fault-tolerant quantum \ncomputing is a way to perform quantum error correction with imperfect operations while \nretaining the ability to suppress errors as long as the noise is below a code's threshold. \nOne of the main challenges in performing fault-tolerant error correction is the high resource \nrequirements that are needed to obtain very low logical noise rates. With the use of \nflag qubits, this thesis develops new fault-tolerant error correction protocols that are applicable \nto arbitrary distance codes. Various code families are shown to satisfy the requirements \nof flag fault-tolerant error correction. We also provide circuits using a constant number of \nqubits for these codes. It is shown that the proposed flag fault-tolerant method uses fewer \nqubits than previous fault-tolerant error correction protocols. \n \nIt is often the case that the noise afflicting a quantum device cannot be fully characterized. \nFurther, even with some knowledge of the noise, it can be very challenging to use \nanalytic decoding methods to improve the performance of a fault-tolerant scheme. This \nthesis presents decoding schemes using several state of the art machine learning techniques \nwith a focus on fault-tolerant quantum error correction in regimes that are relevant to near \nterm experiments. It is shown that even in low noise rate regimes and with no knowledge \nof the noise, noise can be further suppressed for small distance codes. Limitations of machine \nlearning decoders as well as the classical resources required to perform active error \ncorrection are discussed. \n \nIn many cases, gate times can be much shorter than typical measurement times of \nquantum states. Further, classical decoding of the syndrome information used in quantum \nerror correction to compute recovery operators can also be much slower than gate times. \nFor these reasons, schemes where error correction can be implemented in a frame (known \nas the Pauli frame) have been developed to avoid active error correction. In this thesis, we \ngeneralize previous Pauli frame schemes and show how Clifford frame error correction can \nbe implemented with minimal overhead. Clifford frame error correction is necessary if the \nlogical component of recovery operators were chosen from the Clifford group, but could \nalso be used in randomized benchmarking schemes.

•Oct 22, 2018•0 citations

Beyond Single-Shot Fault-Tolerant Quantum Error Correction

Nicolas Delfosse, Ben W. Reichardt, Krysta M. Svore

Extensive quantum error correction is necessary in order to perform a useful computation on a noisy quantum computer. Moreover, quantum error correction must be implemented based on imperfect parity check measurements that may return incorrect outcomes or inject additional faults into the qubits. To achieve fault-tolerant error correction, Shor proposed to repeat the sequence of parity check measurements until the same outcome is observed sufficiently many times. Then, one can use this information to perform error correction. A basic implementation of this fault tolerance strategy requires$\Omega (r d^{2})$parity check measurements for a distance-$d$code defined by$r$parity checks. For some specific highly structured quantum codes, Bombin has shown that single-shot fault-tolerant quantum error correction is possible using only$r$measurements. In this work, we consider a phenomenological noise model for parity check measurements assuming that each bit of a codeword and the measurement outcome suffer from independent bit flips with some error rate$p$. For this model, we demonstrate that fault-tolerant quantum error correction can be achieved using$O(d \log (d))$measurements for any code with distance$d \geq \Omega (n^\alpha)$for some constant$\alpha > 0$. Moreover, we prove the existence of a sub-single-shot fault-tolerant quantum error correction scheme using fewer than$r$measurements. In some cases, the number of parity check measurements required for fault-tolerant quantum error correction is exponentially smaller than the number of parity checks defining the code. The short measurement sequences constructed generally have high weight and our phenomenological noise model is not realistic in this regime. Our error correction strategy could find applications to small codes and LDPC codes if one can manage to keep the weight of the measured parity checks low.

arXiv:2002.05180•IEEE Transactions on Information Theory•Oct 16, 2021•36 citations

Quantum error correction and fault tolerance

Pawan Kumar Verma, Mohit Kumar, Saurabh Singhal +1 more

Quantum computing has the capability to the solution of complex problems that classical systems are incapable of solving, but its practical application is crippled by the instability of quantum states. Trying to do quantum computations with quantum bits (qubits) is prone to decoherence, operational errors, and environmental noise, which can quickly lower computational accuracy. In this chapter, we discuss these issues by studying the theoretical basis and experimental techniques of the quantum error correction and fault-tolerant quantum computing. The key issue that has been recognized is the faithful storage and interaction of quantum information regardless of the fallible hardware and flawed hardware control systems. The aim of this chapter is to get a clear exposition of the principles of leading error correction codes, their implementation strategies, and the fault tolerance criteria. It also talks about threshold theorems, resource overheads and architectural considerations required to make quantum computation scalable. Through theoretical constructs as well as the latest advances, this chapter culminates on the idea that though the fault tolerance is still a resource intensive process in nature, it is theoretically plausible only within a certain limit of error margin. The most notable point is that the progress of quantum error correction and fault-tolerant quantum computing is used to design future quantum architectures that can transform the barriers of experiments to the needs of large-scale and reliable quantum computing.

CRC Press eBooks•Nov 6, 2026•0 citations

QUANTUM ERROR CORRECTION FAILS FOR HAMILTONIAN MODELS

Robert Alicki

It is argued that the existing schemes of fault-tolerant quantum computation, designed for discrete time models and based on quantum error correction, fail for continuous time Hamiltonian models, even with Markovian noise.

arXiv:quant-ph/0411008•Fluctuation and Noise Letters•Aug 4, 2006•18 citations

Dynamic local single-shot checks for toric codes

Yingjia Lin, Abhinav Anand, Kenneth R. Brown

Quantum error correction typically requires repeated syndrome extraction due to measurement noise, which results in substantial time overhead in fault-tolerant computation. Single-shot error correction aims to suppress errors using only one round of syndrome extraction. However, for most codes, it requires high-weight checks, which significantly degrade, and often eliminate, single-shot performance at the circuit level. In this work, we introduce local single-shot checks, where we impose constraints on check weights. Using a dynamic measurement scheme, we show that the number of required measurement rounds can be reduced by a factor determined by this constraint. As an example, we show through numerical simulation that our scheme can improve decoding performance compared to conventional checks when using sliding-window decoding with a reduced window size under circuit-level noise models for toric codes. Our work provides a new direction for constructing checks that can reduce time overhead in large-scale fault-tolerant quantum computation.

quant-pharXiv:2511.20576•Nov 26, 2025•1 citation

QUANTUM ERROR CORRECTION FAILS FOR HAMILTONIAN MODELS

Robert Alicki

It is argued that the existing schemes of fault-tolerant quantum computation, designed for discrete time models and based on quantum error correction, fail for continuous time Hamiltonian models, even with Markovian noise.

WORLD SCIENTIFIC eBooks•Feb 1, 2022•0 citations
Quantum computers have the potential to solve several interesting problems in polynomial \ntime for which no polynomial time classical algorithms have been found. However, \none of the major challenges in building quantum devices is that quantum systems are very \nsensitive to noise arising from undesired interactions with the environment. Noise can lead \nto errors which can corrupt the results of the computation. Quantum error correction is \none way to mitigate the effects of noise arising in quantum devices. \nWith a plethora of quantum error correcting codes that can be used in various settings, \none of the main challenges of quantum error correction is understanding how well various \ncodes perform under more realistic noise models that can be observed in experiments. \nThis thesis proposes a new decoding algorithm which can optimize threshold values of \nerror correcting codes under different noise models. The algorithm can be applied to \nany Markovian noise model. Further, it is shown that for certain noise models, logical \nClifford corrections can further improve a code's threshold value if the code obeys certain \nsymmetries. \n \nSince gates and measurements cannot in general be performed with perfect precision, \nthe operations required to perform quantum error correction can introduce more errors \ninto the system thus negating the benefits of error correction. Fault-tolerant quantum \ncomputing is a way to perform quantum error correction with imperfect operations while \nretaining the ability to suppress errors as long as the noise is below a code's threshold. \nOne of the main challenges in performing fault-tolerant error correction is the high resource \nrequirements that are needed to obtain very low logical noise rates. With the use of \nflag qubits, this thesis develops new fault-tolerant error correction protocols that are applicable \nto arbitrary distance codes. Various code families are shown to satisfy the requirements \nof flag fault-tolerant error correction. We also provide circuits using a constant number of \nqubits for these codes. It is shown that the proposed flag fault-tolerant method uses fewer \nqubits than previous fault-tolerant error correction protocols. \n \nIt is often the case that the noise afflicting a quantum device cannot be fully characterized. \nFurther, even with some knowledge of the noise, it can be very challenging to use \nanalytic decoding methods to improve the performance of a fault-tolerant scheme. This \nthesis presents decoding schemes using several state of the art machine learning techniques \nwith a focus on fault-tolerant quantum error correction in regimes that are relevant to near \nterm experiments. It is shown that even in low noise rate regimes and with no knowledge \nof the noise, noise can be further suppressed for small distance codes. Limitations of machine \nlearning decoders as well as the classical resources required to perform active error \ncorrection are discussed. \n \nIn many cases, gate times can be much shorter than typical measurement times of \nquantum states. Further, classical decoding of the syndrome information used in quantum \nerror correction to compute recovery operators can also be much slower than gate times. \nFor these reasons, schemes where error correction can be implemented in a frame (known \nas the Pauli frame) have been developed to avoid active error correction. In this thesis, we \ngeneralize previous Pauli frame schemes and show how Clifford frame error correction can \nbe implemented with minimal overhead. Clifford frame error correction is necessary if the \nlogical component of recovery operators were chosen from the Clifford group, but could \nalso be used in randomized benchmarking schemes.
Extensive quantum error correction is necessary in order to perform a useful computation on a noisy quantum computer. Moreover, quantum error correction must be implemented based on imperfect parity check measurements that may return incorrect outcomes or inject additional faults into the qubits. To achieve fault-tolerant error correction, Shor proposed to repeat the sequence of parity check measurements until the same outcome is observed sufficiently many times. Then, one can use this information to perform error correction. A basic implementation of this fault tolerance strategy requiresΩ(rd2)\Omega (r d^{2})Ω(rd2)parity check measurements for a distance-dddcode defined byrrrparity checks. For some specific highly structured quantum codes, Bombin has shown that single-shot fault-tolerant quantum error correction is possible using onlyrrrmeasurements. In this work, we consider a phenomenological noise model for parity check measurements assuming that each bit of a codeword and the measurement outcome suffer from independent bit flips with some error rateppp. For this model, we demonstrate that fault-tolerant quantum error correction can be achieved usingO(dlog⁡(d))O(d \log (d))O(dlog(d))measurements for any code with distanced≥Ω(nα)d \geq \Omega (n^\alpha)d≥Ω(nα)for some constantα>0\alpha > 0α>0. Moreover, we prove the existence of a sub-single-shot fault-tolerant quantum error correction scheme using fewer thanrrrmeasurements. In some cases, the number of parity check measurements required for fault-tolerant quantum error correction is exponentially smaller than the number of parity checks defining the code. The short measurement sequences constructed generally have high weight and our phenomenological noise model is not realistic in this regime. Our error correction strategy could find applications to small codes and LDPC codes if one can manage to keep the weight of the measured parity checks low.
Quantum computing has the capability to the solution of complex problems that classical systems are incapable of solving, but its practical application is crippled by the instability of quantum states. Trying to do quantum computations with quantum bits (qubits) is prone to decoherence, operational errors, and environmental noise, which can quickly lower computational accuracy. In this chapter, we discuss these issues by studying the theoretical basis and experimental techniques of the quantum error correction and fault-tolerant quantum computing. The key issue that has been recognized is the faithful storage and interaction of quantum information regardless of the fallible hardware and flawed hardware control systems. The aim of this chapter is to get a clear exposition of the principles of leading error correction codes, their implementation strategies, and the fault tolerance criteria. It also talks about threshold theorems, resource overheads and architectural considerations required to make quantum computation scalable. Through theoretical constructs as well as the latest advances, this chapter culminates on the idea that though the fault tolerance is still a resource intensive process in nature, it is theoretically plausible only within a certain limit of error margin. The most notable point is that the progress of quantum error correction and fault-tolerant quantum computing is used to design future quantum architectures that can transform the barriers of experiments to the needs of large-scale and reliable quantum computing.
Quantum error correction typically requires repeated syndrome extraction due to measurement noise, which results in substantial time overhead in fault-tolerant computation. Single-shot error correction aims to suppress errors using only one round of syndrome extraction. However, for most codes, it requires high-weight checks, which significantly degrade, and often eliminate, single-shot performance at the circuit level. In this work, we introduce local single-shot checks, where we impose constraints on check weights. Using a dynamic measurement scheme, we show that the number of required measurement rounds can be reduced by a factor determined by this constraint. As an example, we show through numerical simulation that our scheme can improve decoding performance compared to conventional checks when using sliding-window decoding with a reduced window size under circuit-level noise models for toric codes. Our work provides a new direction for constructing checks that can reduce time overhead in large-scale fault-tolerant quantum computation.