Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1401.4145 · Physical Review E

Optimal efficiency of a noisy quantum heat engine

Dionisis Stefanatos

Published Jul 21, 2014• 37 citations
arXivHTMLPDF

Abstract

In this article we use optimal control to maximize the efficiency of a quantum heat engine executing the Otto cycle in the presence of external noise. We optimize the engine performance for both amplitude and phase noise. In the case of phase damping we additionally show that the ideal performance of a noiseless engine can be retrieved in the adiabatic (long time) limit. The results obtained here are useful in the quest for absolute zero, the design of quantum refrigerators that can cool a physical system to the lowest possible temperature. They can also be applied to the optimal control of a collection of classical harmonic oscillators sharing the same time-dependent frequency and subjected to similar noise mechanisms. Finally, our methodology can be used for the optimization of other interesting thermodynamic processes.

DOI
10.1103/physreve.90.012119

Related papers

The Quantum Harmonic Otto Cycle

Ronnie Kosloff, Yair Rezek

The quantum Otto cycle serves as a bridge between the macroscopic world of heat engines and the quantum regime of thermal devices composed from a single element. We compile recent studies of the quantum Otto cycle with a harmonic oscillator as a working medium. This model has the advantage that it is analytically trackable. In addition, an experimental realization has been achieved, employing a single ion in a harmonic trap. The review is embedded in the field of quantum thermodynamics and quantum open systems. The basic principles of the theory are explained by a specific example illuminating the basic definitions of work and heat. The relation between quantum observables and the state of the system is emphasized. The dynamical description of the cycle is based on a completely positive map formulated as a propagator for each stroke of the engine. Explicit solutions for these propagators are described on a vector space of quantum thermodynamical observables. These solutions which employ different assumptions and techniques are compared. The tradeoff between power and efficiency is the focal point of finite-time-thermodynamics. The dynamical model enables the study of finite time cycles limiting time on the adiabatic and the thermalization times. Explicit finite time solutions are found which are frictionless (meaning that no coherence is generated), and are also known as shortcuts to adiabaticity.The transition from frictionless to sudden adiabats is characterized by a non-hermitian degeneracy in the propagator. In addition, the influence of noise on the control is illustrated. These results are used to close the cycles either as engines or as refrigerators. The properties of the limit cycle are described. Methods to optimize the power by controlling the thermalization time are also introduced. At high temperatures, the Novikov–Curzon–Ahlborn efficiency at maximum power is obtained. The sudden limit of the engine which allows finite power at zero cycle time is shown. The refrigerator cycle is described within the frictionless limit, with emphasis on the cooling rate when the cold bath temperature approaches zero.

arXiv:1612.03582•Entropy•Mar 23, 2017•382 citations

Quest for absolute zero in the presence of external noise

E. Torrontegui, Ronnie Kosloff

A reciprocating quantum refrigerator is analyzed with the intention to study the limitations imposed by external noise. In particular we focus on the behavior of the refrigerator when it approaches the absolute zero. The cooling cycle is based on the Otto cycle with a working medium constituted by an ensemble of noninteracting harmonic oscillators. The compression and expansion segments are generated by changing an external parameter in the Hamiltonian. In this case the force constant of the harmonic oscillators mω^{2} is modified from an initial to a final value. As a result, the kinetic and potential energy of the system do not commute causing frictional losses. By proper choice of scheduling function ω(t) frictionless solutions can be obtained in the noiseless case. We examine the performance of a refrigerator subject to noise. By expanding from the adiabatic limit we find that the external noise, Gaussian phase, and amplitude noises reduce the amount of heat that can be extracted but nevertheless the zero temperature can be approached.

arXiv:1305.5081•Physical Review E•Sep 3, 2013•23 citations

Boosting the performance of quantum Otto heat engines

Jin-Fu Chen, Chang-Pu Sun, Hui Dong

To optimize the performance of a heat engine in a finite-time cycle, it is important to understand the finite-time effect of thermodynamic processes. Previously, we have shown that extra work is needed to complete a quantum adiabatic process in finite time, and proved that the extra work follows a C/τ^{2} scaling for long control time τ. There the oscillating part of the extra work is neglected due to the complex energy-level structure of the particular quantum system. However, such oscillation of the extra work cannot be neglected in some quantum systems with simple energy-level structure, e.g., the two-level system or the quantum harmonic oscillator. In this paper, we build the finite-time quantum Otto engine on these simple systems, and find that the oscillating extra work leads to a jagged edge in the constraint relation between the output power and the efficiency. By optimizing the control time of the adiabatic processes, the oscillation in the extra work is utilized to enhance the maximum power and the efficiency. We further design special control schemes with the zero extra work at the specific control time. Compared to the linear control scheme, these special control schemes of the finite-time adiabatic process improve the maximum power and the efficiency of the finite-time Otto engine.

arXiv:1907.11567•Physical review. E•Sep 30, 2019•40 citations

Markovian heat engine boosted by quantum coherence

Freddier Cuenca-Montenegro, Marcela Herrera, John Henry Reina

We evaluate the role of quantum coherence as a thermodynamic resource in a noisy, Markovian, one-qubit heat engine. By consuming the coherence of noisy quantum states, we demonstrate that the engine can surpass the classical efficiency limit when operating according to a quantum Otto cycle. The engine's non-classical nature is demonstrated by its violation of the Leggett-Garg's temporal correlations inequality. Amplitude damping increases the extractable work under partial thermalization, thereby increasing the efficiency. In contrast, phase damping increases the extractable work under partial thermalization but reduces the efficiency. We implement the entire Otto cycle in a quantum circuit, simulating realistic amplitude and phase damping channels, as well as gate-level noise. We introduce an operational measure of the circuit's thermodynamic cost to establish a direct link between energy consumption and information processing in quantum heat engines.

arXiv:2505.22902•Physical Review A•Jun 15, 2026•1 citation

Unified trade-off optimization of quantum harmonic Otto engine and refrigerator

Varinder Singh, Satnam Singh, Obinna Abah +1 more

We investigate quantum Otto engine and refrigeration cycles of a time-dependent harmonic oscillator operating under the conditions of maximum Ω function, a trade-off objective function which represents a compromise between energy benefits and losses for a specific job, for both adiabatic and nonadiabatic (sudden) frequency modulations. We derive analytical expressions for the efficiency and coefficient of performance of the Otto cycle. For the case of adiabatic driving, we point out that in the low-temperature regime, the harmonic Otto engine (refrigerator) can be mapped to Feynman's ratchet and pawl model which is a steady-state classical heat engine. For the sudden switch of frequencies, we obtain loop-like behavior of the efficiency-work curve, which is characteristic of irreversible heat engines. Finally, we discuss the behavior of cooling power at maximum Ω function.

arXiv:2112.10669•Physical review. E•Aug 31, 2022•29 citations

Finite-time quantum Otto engine subject to control noise and enhancement techniques

Theodore McKeever, Owen Diba, Ahsan Nazir

With the development of any quantum technology comes a need for precise control of quantum systems. Here, we evaluate the impact of control noise on a quantum Otto cycle. While it is postulated that noiseless quantum engines can approach maximal Otto efficiency in finite times, the existence of white noise on the controls is shown to negatively affect average engine performance. Two methods of quantum enhancement, counterdiabatic driving and quantum lubrication, are implemented and found to improve the performance of the noisy cycle only in specified parameter regimes. To gain insight into performance fluctuations, projective energy measurements are used to construct a noise-averaged probability distribution without assuming full thermalization or adiabaticity. From this, the variances in thermodynamic currents are observed to increase as average power and efficiency improve, and are also shown to be consistent with known bounds from thermodynamic uncertainty relations. Lastly, by comparing the average functioning of the unmonitored engine to a projectively measured engine cycle, the role of coherence in work extraction for this quantum engine model is investigated.

arXiv:2412.15196•Physical Review Research•Jun 30, 2025•4 citations
In this article we use optimal control to maximize the efficiency of a quantum heat engine executing the Otto cycle in the presence of external noise. We optimize the engine performance for both amplitude and phase noise. In the case of phase damping we additionally show that the ideal performance of a noiseless engine can be retrieved in the adiabatic (long time) limit. The results obtained here are useful in the quest for absolute zero, the design of quantum refrigerators that can cool a physical system to the lowest possible temperature. They can also be applied to the optimal control of a collection of classical harmonic oscillators sharing the same time-dependent frequency and subjected to similar noise mechanisms. Finally, our methodology can be used for the optimization of other interesting thermodynamic processes.
The quantum Otto cycle serves as a bridge between the macroscopic world of heat engines and the quantum regime of thermal devices composed from a single element. We compile recent studies of the quantum Otto cycle with a harmonic oscillator as a working medium. This model has the advantage that it is analytically trackable. In addition, an experimental realization has been achieved, employing a single ion in a harmonic trap. The review is embedded in the field of quantum thermodynamics and quantum open systems. The basic principles of the theory are explained by a specific example illuminating the basic definitions of work and heat. The relation between quantum observables and the state of the system is emphasized. The dynamical description of the cycle is based on a completely positive map formulated as a propagator for each stroke of the engine. Explicit solutions for these propagators are described on a vector space of quantum thermodynamical observables. These solutions which employ different assumptions and techniques are compared. The tradeoff between power and efficiency is the focal point of finite-time-thermodynamics. The dynamical model enables the study of finite time cycles limiting time on the adiabatic and the thermalization times. Explicit finite time solutions are found which are frictionless (meaning that no coherence is generated), and are also known as shortcuts to adiabaticity.The transition from frictionless to sudden adiabats is characterized by a non-hermitian degeneracy in the propagator. In addition, the influence of noise on the control is illustrated. These results are used to close the cycles either as engines or as refrigerators. The properties of the limit cycle are described. Methods to optimize the power by controlling the thermalization time are also introduced. At high temperatures, the Novikov–Curzon–Ahlborn efficiency at maximum power is obtained. The sudden limit of the engine which allows finite power at zero cycle time is shown. The refrigerator cycle is described within the frictionless limit, with emphasis on the cooling rate when the cold bath temperature approaches zero.
A reciprocating quantum refrigerator is analyzed with the intention to study the limitations imposed by external noise. In particular we focus on the behavior of the refrigerator when it approaches the absolute zero. The cooling cycle is based on the Otto cycle with a working medium constituted by an ensemble of noninteracting harmonic oscillators. The compression and expansion segments are generated by changing an external parameter in the Hamiltonian. In this case the force constant of the harmonic oscillators mω^{2} is modified from an initial to a final value. As a result, the kinetic and potential energy of the system do not commute causing frictional losses. By proper choice of scheduling function ω(t) frictionless solutions can be obtained in the noiseless case. We examine the performance of a refrigerator subject to noise. By expanding from the adiabatic limit we find that the external noise, Gaussian phase, and amplitude noises reduce the amount of heat that can be extracted but nevertheless the zero temperature can be approached.
To optimize the performance of a heat engine in a finite-time cycle, it is important to understand the finite-time effect of thermodynamic processes. Previously, we have shown that extra work is needed to complete a quantum adiabatic process in finite time, and proved that the extra work follows a C/τ^{2} scaling for long control time τ. There the oscillating part of the extra work is neglected due to the complex energy-level structure of the particular quantum system. However, such oscillation of the extra work cannot be neglected in some quantum systems with simple energy-level structure, e.g., the two-level system or the quantum harmonic oscillator. In this paper, we build the finite-time quantum Otto engine on these simple systems, and find that the oscillating extra work leads to a jagged edge in the constraint relation between the output power and the efficiency. By optimizing the control time of the adiabatic processes, the oscillation in the extra work is utilized to enhance the maximum power and the efficiency. We further design special control schemes with the zero extra work at the specific control time. Compared to the linear control scheme, these special control schemes of the finite-time adiabatic process improve the maximum power and the efficiency of the finite-time Otto engine.
We evaluate the role of quantum coherence as a thermodynamic resource in a noisy, Markovian, one-qubit heat engine. By consuming the coherence of noisy quantum states, we demonstrate that the engine can surpass the classical efficiency limit when operating according to a quantum Otto cycle. The engine's non-classical nature is demonstrated by its violation of the Leggett-Garg's temporal correlations inequality. Amplitude damping increases the extractable work under partial thermalization, thereby increasing the efficiency. In contrast, phase damping increases the extractable work under partial thermalization but reduces the efficiency. We implement the entire Otto cycle in a quantum circuit, simulating realistic amplitude and phase damping channels, as well as gate-level noise. We introduce an operational measure of the circuit's thermodynamic cost to establish a direct link between energy consumption and information processing in quantum heat engines.
We investigate quantum Otto engine and refrigeration cycles of a time-dependent harmonic oscillator operating under the conditions of maximum Ω function, a trade-off objective function which represents a compromise between energy benefits and losses for a specific job, for both adiabatic and nonadiabatic (sudden) frequency modulations. We derive analytical expressions for the efficiency and coefficient of performance of the Otto cycle. For the case of adiabatic driving, we point out that in the low-temperature regime, the harmonic Otto engine (refrigerator) can be mapped to Feynman's ratchet and pawl model which is a steady-state classical heat engine. For the sudden switch of frequencies, we obtain loop-like behavior of the efficiency-work curve, which is characteristic of irreversible heat engines. Finally, we discuss the behavior of cooling power at maximum Ω function.
With the development of any quantum technology comes a need for precise control of quantum systems. Here, we evaluate the impact of control noise on a quantum Otto cycle. While it is postulated that noiseless quantum engines can approach maximal Otto efficiency in finite times, the existence of white noise on the controls is shown to negatively affect average engine performance. Two methods of quantum enhancement, counterdiabatic driving and quantum lubrication, are implemented and found to improve the performance of the noisy cycle only in specified parameter regimes. To gain insight into performance fluctuations, projective energy measurements are used to construct a noise-averaged probability distribution without assuming full thermalization or adiabaticity. From this, the variances in thermodynamic currents are observed to increase as average power and efficiency improve, and are also shown to be consistent with known bounds from thermodynamic uncertainty relations. Lastly, by comparing the average functioning of the unmonitored engine to a projectively measured engine cycle, the role of coherence in work extraction for this quantum engine model is investigated.