Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1312.7237 · Applied Physics Letters

Parametric amplification by coupled flux qubits

M. Rehák, P. Neilinger, M. Grajcar, G. Oelsner, U. Hübner, E. Il'ichev, H.-G. Meyer

Published Apr 21, 2014• 21 citations
arXivHTMLPDF

Abstract

We report parametric amplification of a microwave signal in a Kerr medium formed from superconducting qubits. Two mutually coupled flux qubits, embedded in the current antinode of a superconducting coplanar waveguide resonator, are used as a nonlinear element. Shared Josephson junctions provide the qubit-resonator coupling, resulting in a device with a tunable Kerr constant (up to 3 × 10−3) and a measured gain of about 20 dB. This arrangement represents a unit cell which can be straightforwardly extended to a quasi one-dimensional quantum metamaterial with large tunable Kerr nonlinearity, providing a basis for implementation of wide-band travelling wave parametric amplifiers.

DOI
10.1063/1.4873719

Related papers

Traveling-Wave Parametric Amplifier Based on Three-Wave Mixing in a Josephson Metamaterial

Alexander B Zorin, M. Khabipov, J. Dietel +1 more

We develop a novel concept of a Josephson traveling-wave parametric amplifier with three-wave mixing. The proposed amplifier consists of a microwave transmission line formed by a serial array of nonhysteretic one-junction SQUIDs. These SQUIDs are flux-biased such that the phase drops across the Josephson junctions are equal to 90°. This one-dimensional metamaterial possesses large quadratic nonlinearity and minimal cubic (Kerr-like) nonlinearity. This property allows phase matching and exponential power gain in a wide frequency range. The proof-of-principle measurements performed at temperature T = 4.2 K on Nb trilayer samples have demonstrated the validity of our concept of a practical Josephson parametric amplifier with great promise for quantum-limited performance.

arXiv:1705.02859•IEEE International Superconductive Electronics Conference (ISEC)•Jun 1, 2017•38 citations

Hybridized-Mode Parametric Amplifier in Kinetic-Inductance Circuits

Danial Davoudi, Abdul Mohamed, Shabir Barzanjeh

Parametric amplification is essential for quantum measurement, enabling the amplification of weak microwave signals with minimal added noise. While Josephson-junction-based amplifiers have become standard in superconducting quantum circuits, their magnetic sensitivity, limited saturation power, and sub-kelvin operating requirements motivate the development of alternative nonlinear platforms. Here we demonstrate a two-mode kinetic-inductance parametric amplifier based on a pair of capacitively coupled Kerr-nonlinear resonators fabricated from NbTiN and NbN thin films. The distributed Kerr nonlinearity of these materials enables nondegenerate four-wave-mixing amplification with gains approaching 40 dB, gain-bandwidth products up to 6.9 MHz, and 1-dB compression powers two to three orders of magnitude higher than those of state-of-the-art Josephson amplifiers. A coupled-mode theoretical model accurately captures the pump-induced modification of the hybridized modes and quantitatively reproduces the observed signal and idler responses. The NbN device exhibits a significantly larger Kerr coefficient and superior gain-bandwidth performance, highlighting the advantages of high-kinetic-inductance materials. Our results establish coupled kinetic-inductance resonators as a robust platform for broadband, high-power, and magnetically resilient quantum-limited amplification, offering a scalable route for advanced readout in superconducting qubits, spin ensembles, quantum dots, and other microwave-quantum technologies.

quant-pharXiv:2512.03362•Dec 4, 2025•2 citations

Josephson Metamaterial with a Widely Tunable Positive or Negative Kerr Constant

Wenyuan Zhang, W. Huang, M. E. Gershenson +1 more

The optical Kerr effect, in which a medium's refractive index is affected by the intensity of the transmitted light, is exploited not only in conventional optics, but also in superconducting circuits. This article reports a Josephson-junction-based metamaterial with a widely tunable Kerr constant that can even change sign. Controlled by an external magnetic field, this material can speed up or slow down the phase velocity of light per the intensity of the propagating electromagnetic wave. Such an engineered medium could be used for phase matching in traveling-wave parametric amplifiers, or in superconducting hardware for encoding or reading out quantum information.

arXiv:1707.06834•Physical Review Applied•Nov 13, 2017•36 citations

Kerr nonlinearity and parametric amplification with an Al-InAs superconductor–semiconductor Josephson junction

Z. Hao, T. Shaw, Mehdi Hatefipour +5 more

Nearly quantum limited Josephson parametric amplifiers (JPAs) are essential components in superconducting quantum circuits. However, higher order nonlinearities of the Josephson cosine potential are known to cause gain compression, therefore limiting scalability. In an effort to reduce the fourth order, or Kerr nonlinearity, we realize a parametric amplifier with an Al-InAs superconductor–semiconductor hybrid Josephson junction (JJ). We extract the Kerr nonlinearity of the Al-InAs JJ from two different devices and show that it is three orders of magnitude lower compared to an Al-AlOX junction with identical Josephson inductance. We then demonstrate a four-wave-mixing (4WM) parametric amplifier made with an Al-InAs junction that achieves more than 20 dB of gain and −119 dBm of compression power, which outperforms single resonant JPAs based on Al junctions.

arXiv:2402.11085•Applied Physics Letters•Jun 17, 2024•14 citations

Flux-driven Josephson parametric amplifier

Tsuyoshi Yamamoto, K. Inomata, 道生 渡部 +5 more

We have developed a Josephson parametric amplifier comprising a superconducting coplanar-waveguide resonator terminated by a dc superconducting quantum interference device (SQUID). An external field (the pump, ∼20 GHz) modulates the flux threading of the dc SQUID and, therefore, the resonant frequency of the cavity field (the signal, ∼10 GHz), which leads to the parametric signal amplification. We operated the amplifier at different band centers and observed amplification (17 dB at maximum) and deamplification depending on the relative phase between the pump and the signal. The noise temperature is estimated to be less than 0.87 K.

arXiv:0808.1386•Applied Physics Letters•Jul 28, 2008•485 citations

Quantum Models for Flux-Driven Superconducting Traveling-Wave Parametric Amplifiers with Different Nonlinear Junction Topologies

Michael Haider, Yongjie Yuan, Johannes A. Russer +1 more

In this contribution, we investigate different types of Josephson junction arrays that are embedded in coplanar microwave transmission lines, acting as traveling-wave parametric amplifiers. For the realization of traveling-wave parametric amplifiers, different Josephson junction array geometries have been proposed in the literature. Here, we investigate the amplifier’s Josephson nonlinearity along with the gain performance, following a general method to derive the nonlinear wave-mixing coefficients from the current-phase relation of different junction array topologies. These nonlinear coefficients are then incorporated into a corresponding Hamiltonian, which is used in order to solve the Heisenberg equations of motion of the photon number operator, determining the gain of the amplifier.

IEEE MTT-S International Microwave Symposium digest•Jun 11, 2023•5 citations
We report parametric amplification of a microwave signal in a Kerr medium formed from superconducting qubits. Two mutually coupled flux qubits, embedded in the current antinode of a superconducting coplanar waveguide resonator, are used as a nonlinear element. Shared Josephson junctions provide the qubit-resonator coupling, resulting in a device with a tunable Kerr constant (up to 3 × 10−3) and a measured gain of about 20 dB. This arrangement represents a unit cell which can be straightforwardly extended to a quasi one-dimensional quantum metamaterial with large tunable Kerr nonlinearity, providing a basis for implementation of wide-band travelling wave parametric amplifiers.
We develop a novel concept of a Josephson traveling-wave parametric amplifier with three-wave mixing. The proposed amplifier consists of a microwave transmission line formed by a serial array of nonhysteretic one-junction SQUIDs. These SQUIDs are flux-biased such that the phase drops across the Josephson junctions are equal to 90°. This one-dimensional metamaterial possesses large quadratic nonlinearity and minimal cubic (Kerr-like) nonlinearity. This property allows phase matching and exponential power gain in a wide frequency range. The proof-of-principle measurements performed at temperature T = 4.2 K on Nb trilayer samples have demonstrated the validity of our concept of a practical Josephson parametric amplifier with great promise for quantum-limited performance.
Parametric amplification is essential for quantum measurement, enabling the amplification of weak microwave signals with minimal added noise. While Josephson-junction-based amplifiers have become standard in superconducting quantum circuits, their magnetic sensitivity, limited saturation power, and sub-kelvin operating requirements motivate the development of alternative nonlinear platforms. Here we demonstrate a two-mode kinetic-inductance parametric amplifier based on a pair of capacitively coupled Kerr-nonlinear resonators fabricated from NbTiN and NbN thin films. The distributed Kerr nonlinearity of these materials enables nondegenerate four-wave-mixing amplification with gains approaching 40 dB, gain-bandwidth products up to 6.9 MHz, and 1-dB compression powers two to three orders of magnitude higher than those of state-of-the-art Josephson amplifiers. A coupled-mode theoretical model accurately captures the pump-induced modification of the hybridized modes and quantitatively reproduces the observed signal and idler responses. The NbN device exhibits a significantly larger Kerr coefficient and superior gain-bandwidth performance, highlighting the advantages of high-kinetic-inductance materials. Our results establish coupled kinetic-inductance resonators as a robust platform for broadband, high-power, and magnetically resilient quantum-limited amplification, offering a scalable route for advanced readout in superconducting qubits, spin ensembles, quantum dots, and other microwave-quantum technologies.
The optical Kerr effect, in which a medium's refractive index is affected by the intensity of the transmitted light, is exploited not only in conventional optics, but also in superconducting circuits. This article reports a Josephson-junction-based metamaterial with a widely tunable Kerr constant that can even change sign. Controlled by an external magnetic field, this material can speed up or slow down the phase velocity of light per the intensity of the propagating electromagnetic wave. Such an engineered medium could be used for phase matching in traveling-wave parametric amplifiers, or in superconducting hardware for encoding or reading out quantum information.
Nearly quantum limited Josephson parametric amplifiers (JPAs) are essential components in superconducting quantum circuits. However, higher order nonlinearities of the Josephson cosine potential are known to cause gain compression, therefore limiting scalability. In an effort to reduce the fourth order, or Kerr nonlinearity, we realize a parametric amplifier with an Al-InAs superconductor–semiconductor hybrid Josephson junction (JJ). We extract the Kerr nonlinearity of the Al-InAs JJ from two different devices and show that it is three orders of magnitude lower compared to an Al-AlOX junction with identical Josephson inductance. We then demonstrate a four-wave-mixing (4WM) parametric amplifier made with an Al-InAs junction that achieves more than 20 dB of gain and −119 dBm of compression power, which outperforms single resonant JPAs based on Al junctions.
We have developed a Josephson parametric amplifier comprising a superconducting coplanar-waveguide resonator terminated by a dc superconducting quantum interference device (SQUID). An external field (the pump, ∼20 GHz) modulates the flux threading of the dc SQUID and, therefore, the resonant frequency of the cavity field (the signal, ∼10 GHz), which leads to the parametric signal amplification. We operated the amplifier at different band centers and observed amplification (17 dB at maximum) and deamplification depending on the relative phase between the pump and the signal. The noise temperature is estimated to be less than 0.87 K.
In this contribution, we investigate different types of Josephson junction arrays that are embedded in coplanar microwave transmission lines, acting as traveling-wave parametric amplifiers. For the realization of traveling-wave parametric amplifiers, different Josephson junction array geometries have been proposed in the literature. Here, we investigate the amplifier’s Josephson nonlinearity along with the gain performance, following a general method to derive the nonlinear wave-mixing coefficients from the current-phase relation of different junction array topologies. These nonlinear coefficients are then incorporated into a corresponding Hamiltonian, which is used in order to solve the Heisenberg equations of motion of the photon number operator, determining the gain of the amplifier.