Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1312.6892

Slow Light in Metamaterial Waveguides

Benjamin R. Lavoie

Published Jan 1, 2013• 3 citations
arXivHTMLPDF

Abstract

Metamaterials, which are materials engineered to possess novel optical properties, have been increasingly studied. The ability to fabricate metamaterials has sparked an interest in determining possible applications. We investigate using a metamaterial for boundary engineering in waveguides. A metamaterial-clad cylindrical waveguide is used to provide confinement for an optical signal, thereby increasing the local electromagnetic energy density. We show that metamaterial-clad waveguides have unique optical properties, including new modes, which we call hybrid modes. These modes have properties of both ordinary guided modes and surface plasmon-polariton modes. We show that for certain metamaterial parameters, the surface plasmon-polariton modes of a metamaterial-clad waveguide have less propagation loss than those of a metal-clad guide with the same permittivity. This low-loss mode is exploited for all-optical control of weak fields. Embedding three-level Λ atoms in the dielectric core of a metamaterial-clad waveguide allows the use of electromagnetically induced transparency to control an optical signal. Adjusting the pump field alters the group velocity of the signal, thereby controllably delaying pulses. Using the low-loss surface mode of a metamaterial-clad guide reduces losses by 20% over a metal cladding without sacrificing the group velocity reduction or confinement. In addition, we show that losses can be reduced by as much as 40% with sufficient reduction of the magnetic damping constant of the metamaterial. As this work aims for applications, practical considerations for fabricating and testing metamaterial-clad waveguides are discussed. An overview of the benefits and drawbacks for two different dielectric core materials is given. Also, a short discussion of other modes that could be used is given.

DOI
10.11575/prism/27801

Related papers

Slow light with three-level atoms in metamaterial waveguides

Benjamin R. Lavoie, Patrick M. Leung, Barry C. Sanders

Metamaterial is promising for enhancing the capability of plasmonic devices. We consider a cylindrical waveguide with three-level $\ensuremath{\Lambda}$ atoms embedded in the dielectric core. By comparing metal cladding vs metamaterial cladding of a waveguide with $\ensuremath{\Lambda}$ atoms in the core, we show that, for a fixed amount of slowing of light due to electromagnetically induced transparency, the metamaterial cladding outperforms in terms of the inherent loss.

arXiv:1303.3218•Physical Review A•Aug 30, 2013•11 citations

Surface polariton-polariton induced transparency in left-handed metamaterials

Ali A. Kamli, Sergey A. Moiseev, Barry C. Sanders

Surface polaritons (SP) are electromagnetic waves that propagate near the interface of two media with electric field amplitudes strongly decaying with distance from the interface. The two media could be left-handed with both the electric permittivity and magnetic permeability being negative. These media give us new possibilities of slow light control [1,2]. Here we propose to control SP mode propagation in left-handed materials using SP-SP induced transparency. In the proposed scheme, the spatially confined SP interacts with three level lambda type atoms near the surface. An expression for the complex absorption coefficient in the presence of additional control SP mode is derived. We demonstrate a new specific spectral behavior of the probe SP mode propagation that are determined by the spatial properties of interaction between the SP modes and three level atoms. Optimal conditions for the SP mode control will be discussed.

International Conference on Quantum Information•Jan 1, 2008•0 citations

Slow light using negative metamaterials

Wentao Lu, Yue Huang, Srinivas Sridhar

A general overview of slow light waveguide structures made of negative metamaterials is presented. We discuss the conditions and the parameter space to achieve zero total energy flow and zero group velocity due to the degeneracy of forward and backward waves in waveguides cladded with single negative metamaterials. Absorptive loss plays a severely limiting role and can prevent achieving the zero group velocity condition. Gain can be introduced either in dielectric or negative metamaterials to restore the zero group velocity condition. This type of slow light waveguide has a large delay bandwidth product and is suitable for use in integrated optoelectronic circuits.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Sep 8, 2011•1 citation

Coherent Control of Low Loss Surface Polaritons

Ali A. Kamli, Sergey A. Moiseev, Barry C. Sanders

We propose fast all-optical control of surface polaritons by placing an electromagnetically induced transparency (EIT) medium at an interface between two materials. EIT provides longitudinal compression and a slow group velocity, while matching properties of the two materials at the interface provides strong transverse confinement. In particular, we show that an EIT medium near the interface between a dielectric and a negative-index metamaterial can establish tight longitudinal and transverse confinement plus extreme slowing of surface polaritons, in both transverse electric and transverse magnetic polarizations, while simultaneously avoiding losses.

arXiv:0805.1739•Physical Review Letters•Dec 22, 2008•63 citations

Slow light with electromagnetically induced transparency in optical fibre

Agus Muhamad Hatta, Ali A. Kamli, Ola Al-Hagan +1 more

Abstract Slow light with electromagnetically induced transparency (EIT) in the core of optical fibre containing three-level atoms is investigated. The guided modes are treated in the weakly guiding approximation which renders the analysis into a manageable form. The transparency window and permittivity profile of the core due to the strong pump field in the EIT scheme is calculated. For a specific permittivity profile of the core due to EIT, the propagation constant of the weak signal field and spatial shape of fundamental guided mode are calculated by solving the vector wave equation using the finite difference method. It is found that the transparency window and slow light field can be controlled via the optical fibre parameters. The reduced group velocity of slow light in this configuration is useful for many technological applications such as optical memories, effective control of single photon fields, optical buffers and delay lines.

arXiv:1412.5742•Journal of Physics B Atomic Molecular and Optical Physics•Jun 26, 2015•4 citations

Photonic molecules for subwavelength light confinement design and applications

Aditya Jain

Similar to the confinement of an electron in a potential well, photons can be spatially confined inside a high index resonator. This confinement can be used to create efficient strong light matter interaction, all optical logic, single photon generation among many other possibilities, provided the resonators possess a small physical volume and low photon decay rate simultaneously. In this thesis, we present two resonator designs, that are 30 times smaller than the wavelength of light in a single direction and exhibit large quality factors. Thereafter, we proceed with three different applications of these resonators.\nFirst application is to slow down the group velocity of light. In the past, many works have been aimed at using a two-resonator model to describe such a system, but fail to provide information about the transmission and group delay. We develop an alternative model that can describe the scattering parameters of such a slow light system with good accuracy. The model also predicts a new phenomenon, namely classical analogue of electromagnetically induced absorption. These predictions are subsequently demonstrated in experiments at GHz and THz frequencies.\nIn the second application, we use these resonators to create media with properties unattainable in nature, more popularly known as metamaterials. We demonstrate a low-loss metamaterial by exploiting dark bound states in dielectric inclusions coupled to the external waves by small nonresonant antennas. Finally, we experimentally demonstrate a low loss metamaterial that exhibits negative permittivity or permeability, either separately or simultaneously at GHz and THz frequencies.\nIn the third and final application, we show that the proposed low loss resonators can serve as a route to miniaturization of laser systems. Till date, all approaches encounter a trade-off between the system dimensions and the Q factor, especially when going subwavelength. We propose a laser system that overcomes this trade-off and offers radiation tunability, directionality, subwavelength integration and simple layer-by-layer fabrication.

•Jan 1, 2016•0 citations
Metamaterials, which are materials engineered to possess novel optical properties, have been increasingly studied. The ability to fabricate metamaterials has sparked an interest in determining possible applications. We investigate using a metamaterial for boundary engineering in waveguides. A metamaterial-clad cylindrical waveguide is used to provide confinement for an optical signal, thereby increasing the local electromagnetic energy density. We show that metamaterial-clad waveguides have unique optical properties, including new modes, which we call hybrid modes. These modes have properties of both ordinary guided modes and surface plasmon-polariton modes. We show that for certain metamaterial parameters, the surface plasmon-polariton modes of a metamaterial-clad waveguide have less propagation loss than those of a metal-clad guide with the same permittivity. This low-loss mode is exploited for all-optical control of weak fields. Embedding three-level Λ atoms in the dielectric core of a metamaterial-clad waveguide allows the use of electromagnetically induced transparency to control an optical signal. Adjusting the pump field alters the group velocity of the signal, thereby controllably delaying pulses. Using the low-loss surface mode of a metamaterial-clad guide reduces losses by 20% over a metal cladding without sacrificing the group velocity reduction or confinement. In addition, we show that losses can be reduced by as much as 40% with sufficient reduction of the magnetic damping constant of the metamaterial. As this work aims for applications, practical considerations for fabricating and testing metamaterial-clad waveguides are discussed. An overview of the benefits and drawbacks for two different dielectric core materials is given. Also, a short discussion of other modes that could be used is given.
Metamaterial is promising for enhancing the capability of plasmonic devices. We consider a cylindrical waveguide with three-level $\ensuremath{\Lambda}$ atoms embedded in the dielectric core. By comparing metal cladding vs metamaterial cladding of a waveguide with $\ensuremath{\Lambda}$ atoms in the core, we show that, for a fixed amount of slowing of light due to electromagnetically induced transparency, the metamaterial cladding outperforms in terms of the inherent loss.
Surface polaritons (SP) are electromagnetic waves that propagate near the interface of two media with electric field amplitudes strongly decaying with distance from the interface. The two media could be left-handed with both the electric permittivity and magnetic permeability being negative. These media give us new possibilities of slow light control [1,2]. Here we propose to control SP mode propagation in left-handed materials using SP-SP induced transparency. In the proposed scheme, the spatially confined SP interacts with three level lambda type atoms near the surface. An expression for the complex absorption coefficient in the presence of additional control SP mode is derived. We demonstrate a new specific spectral behavior of the probe SP mode propagation that are determined by the spatial properties of interaction between the SP modes and three level atoms. Optimal conditions for the SP mode control will be discussed.
A general overview of slow light waveguide structures made of negative metamaterials is presented. We discuss the conditions and the parameter space to achieve zero total energy flow and zero group velocity due to the degeneracy of forward and backward waves in waveguides cladded with single negative metamaterials. Absorptive loss plays a severely limiting role and can prevent achieving the zero group velocity condition. Gain can be introduced either in dielectric or negative metamaterials to restore the zero group velocity condition. This type of slow light waveguide has a large delay bandwidth product and is suitable for use in integrated optoelectronic circuits.
We propose fast all-optical control of surface polaritons by placing an electromagnetically induced transparency (EIT) medium at an interface between two materials. EIT provides longitudinal compression and a slow group velocity, while matching properties of the two materials at the interface provides strong transverse confinement. In particular, we show that an EIT medium near the interface between a dielectric and a negative-index metamaterial can establish tight longitudinal and transverse confinement plus extreme slowing of surface polaritons, in both transverse electric and transverse magnetic polarizations, while simultaneously avoiding losses.
Abstract Slow light with electromagnetically induced transparency (EIT) in the core of optical fibre containing three-level atoms is investigated. The guided modes are treated in the weakly guiding approximation which renders the analysis into a manageable form. The transparency window and permittivity profile of the core due to the strong pump field in the EIT scheme is calculated. For a specific permittivity profile of the core due to EIT, the propagation constant of the weak signal field and spatial shape of fundamental guided mode are calculated by solving the vector wave equation using the finite difference method. It is found that the transparency window and slow light field can be controlled via the optical fibre parameters. The reduced group velocity of slow light in this configuration is useful for many technological applications such as optical memories, effective control of single photon fields, optical buffers and delay lines.
Similar to the confinement of an electron in a potential well, photons can be spatially confined inside a high index resonator. This confinement can be used to create efficient strong light matter interaction, all optical logic, single photon generation among many other possibilities, provided the resonators possess a small physical volume and low photon decay rate simultaneously. In this thesis, we present two resonator designs, that are 30 times smaller than the wavelength of light in a single direction and exhibit large quality factors. Thereafter, we proceed with three different applications of these resonators.\nFirst application is to slow down the group velocity of light. In the past, many works have been aimed at using a two-resonator model to describe such a system, but fail to provide information about the transmission and group delay. We develop an alternative model that can describe the scattering parameters of such a slow light system with good accuracy. The model also predicts a new phenomenon, namely classical analogue of electromagnetically induced absorption. These predictions are subsequently demonstrated in experiments at GHz and THz frequencies.\nIn the second application, we use these resonators to create media with properties unattainable in nature, more popularly known as metamaterials. We demonstrate a low-loss metamaterial by exploiting dark bound states in dielectric inclusions coupled to the external waves by small nonresonant antennas. Finally, we experimentally demonstrate a low loss metamaterial that exhibits negative permittivity or permeability, either separately or simultaneously at GHz and THz frequencies.\nIn the third and final application, we show that the proposed low loss resonators can serve as a route to miniaturization of laser systems. Till date, all approaches encounter a trade-off between the system dimensions and the Q factor, especially when going subwavelength. We propose a laser system that overcomes this trade-off and offers radiation tunability, directionality, subwavelength integration and simple layer-by-layer fabrication.