Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1311.7119 · Physical Review Letters

Continuous Centrifuge Decelerator for Polar Molecules

Sotir Chervenkov, Xing Wu, Josef Bayerl, Andreas Rohlfes, Thomas Gantner, Martin Zeppenfeld, Gerhard Rempe

Published Jan 6, 2014• 78 citations
arXivHTMLPDF

Abstract

Producing large samples of slow molecules from thermal-velocity ensembles is a formidable challenge. Here we employ a centrifugal force to produce a continuous molecular beam with a high flux at near-zero velocities. We demonstrate deceleration of three electrically guided molecular species, ${\mathrm{CH}}_{3}\mathrm{F}$, ${\mathrm{CF}}_{3}\mathrm{H}$, and ${\mathrm{CF}}_{3}\mathrm{CCH}$, with input velocities of up to $200\text{ }\text{ }{\mathrm{m}\text{ }\mathrm{s}}^{\ensuremath{-}1}$ to obtain beams with velocities below $15\text{ }\text{ }{\mathrm{m}\text{ }\mathrm{s}}^{\ensuremath{-}1}$ and intensities of several ${10}^{9}\text{ }\text{ }{\mathrm{mm}}^{\ensuremath{-}2}\text{ }{\mathrm{s}}^{\ensuremath{-}1}$. The centrifuge decelerator is easy to operate and can, in principle, slow down any guidable particle. It has the potential to become a standard technique for continuous deceleration of molecules.

DOI
10.1103/physrevlett.112.013001

Related papers

A Centrifuge Decelerator and a Thermometer for Cold Polar Molecules

Xing Yang Wu

Molecules in the low temperature limit offer fascinating research perspectives in physics and chemistry, and molecule cooling and deceleration has developed into a research field of its own.The grand challenge today is to prepare dense samples with ample cold molecules.Towards this end, we present an elegant solution to this problem by a nonconventional approach, employing the centrifugal force in a rotating frame to decelerate molecules to a standstill.The centrifuge deceleration is a generic method since its principle is not associated with any specific internal structure of the molecules.Moreover, electrostatic guiding of molecules is applied throughout the deceleration process, which enables for the first time the deceleration of continuous molecular beams to achieve unprecedented high fluxes of slow molecules.In a proof-ofprinciple experiment, we demonstrate fluxes of ∼ 10 9 molecules/s and densities of ∼ 10 8 molecules/cm 3 below k B •1 K in the laboratory frame, originated from a roomtemperature effusive beam source.The efficiency of this decelerator is measured to be up to 20%, outperforming all the existing molecular deceleration methods.The generality of this method is demonstrated by the deceleration of several polyatomic molecular species, CH 3 F, CF 3 H, and CF 3 CCH.In addition to presenting the basic principle and the results, we also describe thoroughly in this thesis the design of the centrifuge decelerator, optimized through Monte-Carlo trajectory simulations, and the technical assembly.The second focus of this thesis is on the development and implementation of a simple and robust internal-state thermometry method for cold polyatomic molecules.The method is based on the combination of resonant radio-frequency depletion spectroscopy and Monte Carlo trajectory simulations.The radio-frequency depletion spectroscopy is capable of addressing 100% of the rotational states populated by the cold polyatomic molecules, as well as resolving their hyperfine states.With this tool, various aspects of cryogenic buffer-gas cooling used as a source of internally cold molecules are characterized.The properties of the cold molecular beams obtained at different buffer-gas temperature, densities, and cooling regimes, are analyzed.The cooling processes for different polyatomic molecules are compared.These studies reveal also two interesting phenomena in the buffer-gas cooling process.Firstly, evidence is provided that molecular rotational degrees of freedom can thermalize more efficiently than their translational ones.Secondly, the measurements provide indications for dependence of the collisional relaxation rate on the rotational states of the molecules.

•Jan 1, 2017•1 citation

Universal deceleration of highly polar molecules

M. Hamamda, P. Pillet, Hans Lignier +1 more

We propose a method to produce, in a pulsed or continuous way, cold samples of highly polar molecules. Using a pulsed or continuous standard (supersonic) beam of these molecules, our idea consists of transforming the molecules into their anionic counterparts, which are decelerated to a standstill by a well-controlled external electric field and ultimately neutralized. The neutral-to-anion transformation occurs through collisions with Rydberg atoms coming from an additional atomic beam. This Rydberg electron transfer process is possible provided that the molecular species has a sufficiently strong electric dipole ( D, i.e., cm). Whatever the mass of the species, the deceleration stage is realized by a temporally and spatially controlled electric field within a range of less than one centimeter, which is much shorter than in current deceleration experiments of neutral molecules. Once stopped, the molecular anions are neutralized by laser photodetachment or a pulsed electric field process. The resulting molecules might be held and accumulated, for instance, in a magnetic trap.

New Journal of Physics•Apr 24, 2015•4 citations

Continuous guided beams of slow and internally cold polar molecules

Christian Sommer, Laurens D. van Buuren, M. Motsch +4 more

We describe the combination of buffer-gas cooling with electrostatic velocity filtering to produce a high-flux continuous guided beam of internally cold and slow polar molecules. In a previous paper (L.D. van Buuren et al., Phys. Rev. Lett., 2009, 102, 033001) we presented results on density and state purity for guided beams of ammonia and formaldehyde using an optimized set-up. Here we describe in more detail the technical aspects of the cryogenic source, its operation, and the optimization experiments that we performed to obtain the best performance. The versatility of the source is demonstrated by the production of guided beams of different molecular species.

arXiv:0812.1923•Faraday Discussions•Jan 1, 2009•43 citations

Zeeman-Sisyphus Deceleration of Molecular Beams

Benjamin L. Augenbraun, Alexander Frenett, Hiromitsu Sawaoka +5 more

We present a robust, continuous molecular decelerator that employs high magnetic fields and few optical pumping steps. CaOH molecules are slowed, accumulating at low velocities in a range sufficient for loading both magnetic and magneto-optical traps. During the slowing, the molecules scatter only seven photons, removing around 8 K of energy. Because large energies can be removed with only a few spontaneous radiative decays, this method can in principle be applied to nearly any paramagnetic atomic or molecular species, opening a general path to trapping of complex molecules.

arXiv:2109.03067•Physical Review Letters•Dec 20, 2021•22 citations

Deceleration of continuous molecular beams

Eric R. Hudson

A method for decelerating a continuous beam of neutral polar molecules is theoretically demonstrated. This method utilizes nonuniform static electric fields and regions of adiabatic population transfer to generate a mechanical force that opposes the molecular beam's velocity. By coupling this technique with dissipative trap-loading molecular densities $\ensuremath{\ge}{10}^{11}\text{ }{\text{cm}}^{\ensuremath{-}3}$ are possible.

arXiv:0901.4164•Physical Review A•Jun 19, 2009•8 citations

Production and application of translationally cold molecules

Hendrick L. Bethlem, Gerard Meijer

Inspired by the spectacular successes in the field of cold atoms, there is currently great interest in cold molecules. Cooling molecules is useful for various fundamental physics studies and gives access to an exotic regime in chemistry where the wave property of the molecules becomes important. Although cooling molecules has turned out to be considerably more difficult than cooling atoms, a number of methods to produce samples of cold molecules have been demonstrated over the last few years. This paper aims to review the application of cold molecules and the methods to produce them. Emphasis is put on the deceleration of polar molecules using time-varying electric fields. The operation principle of the array of electrodes that is used to decelerate polar molecules is described in analogy with, and using terminology from, charged-particle accelerators. It is shown that, by applying an appropriately timed high voltage burst, molecules can be decelerated while the phase-space density, i.e. the number of molecules per position-velocity interval, remains constant. In this way the high density and low temperature in the moving frame of a pulsed molecular beam can be transferred to the laboratory frame. Experiments on metastable CO in states that are either repelled by or attracted to high electric fields are presented. Loading of slow molecules into traps and storage rings is discussed.

International Reviews in Physical Chemistry•Jan 1, 2003•227 citations
Producing large samples of slow molecules from thermal-velocity ensembles is a formidable challenge. Here we employ a centrifugal force to produce a continuous molecular beam with a high flux at near-zero velocities. We demonstrate deceleration of three electrically guided molecular species, CH3F{\mathrm{CH}}_{3}\mathrm{F}CH3​F, CF3H{\mathrm{CF}}_{3}\mathrm{H}CF3​H, and CF3CCH{\mathrm{CF}}_{3}\mathrm{CCH}CF3​CCH, with input velocities of up to 200  m s\ensuremath−1200\text{ }\text{ }{\mathrm{m}\text{ }\mathrm{s}}^{\ensuremath{-}1}200  m s\ensuremath−1 to obtain beams with velocities below 15  m s\ensuremath−115\text{ }\text{ }{\mathrm{m}\text{ }\mathrm{s}}^{\ensuremath{-}1}15  m s\ensuremath−1 and intensities of several 109  mm\ensuremath−2 s\ensuremath−1{10}^{9}\text{ }\text{ }{\mathrm{mm}}^{\ensuremath{-}2}\text{ }{\mathrm{s}}^{\ensuremath{-}1}109  mm\ensuremath−2 s\ensuremath−1. The centrifuge decelerator is easy to operate and can, in principle, slow down any guidable particle. It has the potential to become a standard technique for continuous deceleration of molecules.
Molecules in the low temperature limit offer fascinating research perspectives in physics and chemistry, and molecule cooling and deceleration has developed into a research field of its own.The grand challenge today is to prepare dense samples with ample cold molecules.Towards this end, we present an elegant solution to this problem by a nonconventional approach, employing the centrifugal force in a rotating frame to decelerate molecules to a standstill.The centrifuge deceleration is a generic method since its principle is not associated with any specific internal structure of the molecules.Moreover, electrostatic guiding of molecules is applied throughout the deceleration process, which enables for the first time the deceleration of continuous molecular beams to achieve unprecedented high fluxes of slow molecules.In a proof-ofprinciple experiment, we demonstrate fluxes of ∼ 10 9 molecules/s and densities of ∼ 10 8 molecules/cm 3 below k B •1 K in the laboratory frame, originated from a roomtemperature effusive beam source.The efficiency of this decelerator is measured to be up to 20%, outperforming all the existing molecular deceleration methods.The generality of this method is demonstrated by the deceleration of several polyatomic molecular species, CH 3 F, CF 3 H, and CF 3 CCH.In addition to presenting the basic principle and the results, we also describe thoroughly in this thesis the design of the centrifuge decelerator, optimized through Monte-Carlo trajectory simulations, and the technical assembly.The second focus of this thesis is on the development and implementation of a simple and robust internal-state thermometry method for cold polyatomic molecules.The method is based on the combination of resonant radio-frequency depletion spectroscopy and Monte Carlo trajectory simulations.The radio-frequency depletion spectroscopy is capable of addressing 100% of the rotational states populated by the cold polyatomic molecules, as well as resolving their hyperfine states.With this tool, various aspects of cryogenic buffer-gas cooling used as a source of internally cold molecules are characterized.The properties of the cold molecular beams obtained at different buffer-gas temperature, densities, and cooling regimes, are analyzed.The cooling processes for different polyatomic molecules are compared.These studies reveal also two interesting phenomena in the buffer-gas cooling process.Firstly, evidence is provided that molecular rotational degrees of freedom can thermalize more efficiently than their translational ones.Secondly, the measurements provide indications for dependence of the collisional relaxation rate on the rotational states of the molecules.
We propose a method to produce, in a pulsed or continuous way, cold samples of highly polar molecules. Using a pulsed or continuous standard (supersonic) beam of these molecules, our idea consists of transforming the molecules into their anionic counterparts, which are decelerated to a standstill by a well-controlled external electric field and ultimately neutralized. The neutral-to-anion transformation occurs through collisions with Rydberg atoms coming from an additional atomic beam. This Rydberg electron transfer process is possible provided that the molecular species has a sufficiently strong electric dipole ( D, i.e., cm). Whatever the mass of the species, the deceleration stage is realized by a temporally and spatially controlled electric field within a range of less than one centimeter, which is much shorter than in current deceleration experiments of neutral molecules. Once stopped, the molecular anions are neutralized by laser photodetachment or a pulsed electric field process. The resulting molecules might be held and accumulated, for instance, in a magnetic trap.
We describe the combination of buffer-gas cooling with electrostatic velocity filtering to produce a high-flux continuous guided beam of internally cold and slow polar molecules. In a previous paper (L.D. van Buuren et al., Phys. Rev. Lett., 2009, 102, 033001) we presented results on density and state purity for guided beams of ammonia and formaldehyde using an optimized set-up. Here we describe in more detail the technical aspects of the cryogenic source, its operation, and the optimization experiments that we performed to obtain the best performance. The versatility of the source is demonstrated by the production of guided beams of different molecular species.
We present a robust, continuous molecular decelerator that employs high magnetic fields and few optical pumping steps. CaOH molecules are slowed, accumulating at low velocities in a range sufficient for loading both magnetic and magneto-optical traps. During the slowing, the molecules scatter only seven photons, removing around 8 K of energy. Because large energies can be removed with only a few spontaneous radiative decays, this method can in principle be applied to nearly any paramagnetic atomic or molecular species, opening a general path to trapping of complex molecules.
Inspired by the spectacular successes in the field of cold atoms, there is currently great interest in cold molecules. Cooling molecules is useful for various fundamental physics studies and gives access to an exotic regime in chemistry where the wave property of the molecules becomes important. Although cooling molecules has turned out to be considerably more difficult than cooling atoms, a number of methods to produce samples of cold molecules have been demonstrated over the last few years. This paper aims to review the application of cold molecules and the methods to produce them. Emphasis is put on the deceleration of polar molecules using time-varying electric fields. The operation principle of the array of electrodes that is used to decelerate polar molecules is described in analogy with, and using terminology from, charged-particle accelerators. It is shown that, by applying an appropriately timed high voltage burst, molecules can be decelerated while the phase-space density, i.e. the number of molecules per position-velocity interval, remains constant. In this way the high density and low temperature in the moving frame of a pulsed molecular beam can be transferred to the laboratory frame. Experiments on metastable CO in states that are either repelled by or attracted to high electric fields are presented. Loading of slow molecules into traps and storage rings is discussed.