Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1310.0612 · International Conference on Communications

Secrecy rate study in two-hop relay channel with finite constellations

Zhen Qu, Shengli Zhang, Mingjun Dai, Hui Wang

Published Jun 1, 2014• 0 citations
arXivHTMLPDF

Abstract

Two-hop security communication with an eavesdropper in wireless environment is a hot research direction. The basic idea is that the destination, simultaneously with the source, sends a jamming signal to interfere the eavesdropper near to or co-located with the relay. Similar as physical layer network coding, the friendly jamming signal will prevent the eavesdropper from detecting the useful information originated from the source and will not affect the destination on detecting the source information with the presence of the known jamming signal. However, existing investigations are confined to Gaussian distributed signals, which are seldom used in real systems. When finite constellation signals are applied, the behavior of the secrecy rate becomes very different. For example, the secrecy rate depends on phase difference between the input signals with finite constellations, which is not observed with Gaussian signals. In this paper, we investigate the secrecy capacity and derive its upper bound for the two-hop relay model, by assuming an eavesdropper near the relay and the widely used M-PSK modulation. With our upper bound, the best and worst phase differences in high SNR region are then given. Numerical studies verify our analysis and show that the derived upper bound is relatively tight.

DOI
10.1109/icc.2014.6884031

Related papers

Two-Hop Secure Communication Using an Untrusted Relay: A Case for Cooperative Jamming

Xiang He, Aylin Yener

We consider a source-destination pair that can communicate only through an unauthenticated intermediate relay node. In this two-hop communication scenario, where the cooperation from the relay node is essential, we investigate whether achieving non-zero secrecy rate is possible. Specifically, we treat the relay node as an eavesdropper from whom the source information needs to be kept secret, despite the fact that its cooperation in relaying this information is needed. We find that a positive secrecy rate is indeed achievable, with the aid of the destination node or an external node that jams the relay, i.e., by cooperative jamming. We derive an upper bound on the secrecy rate by means of an eavesdropper-relay separation argument. We remark that this upper bound is the first of its kind in Gaussian channels with cooperative jamming. The upper bound is strictly smaller than the channel capacity without secrecy constraints. The achievable secrecy rates are found using stochastic encoding and compress-and-forward at the relay. Numerical results show that the gap between the bound and the achievable rate is small when the relay's power is larger than the power of the jammer and the source. In essence, this paper shows that a cooperative jammer enables secure communication to take place using an untrusted relay which would be otherwise impossible.

Globecom•Jan 1, 2008•152 citations

Destination Assisted Secret Transmission in Wireless Relay Networks

Shaobo Jia, Jiayan Zhang, Honglin Zhao +1 more

To improve physical (PHY) layer security of a wireless relay system in the presence of an eavesdropper, a two-phase cooperative relaying scheme is investigated in this paper. In phase I, the source transmits confidential message, simultaneously, it cooperates with the friendly jammers and destination to create jamming signal at the eavesdropper without affecting the forwarding relay which is preselected. In phase II, the forwarding relay retransmits the decoded signal, meanwhile, the particular relay cooperates with the friendly jammers to create jamming signal at the eavesdropper without affecting the destination. We focus on the investigation of optimal power allocation for maximizing achievable secrecy rate subject to a total power constraint. Optimal relay selection and suboptimal relay selection schemes are also proposed. It is shown that as the number of relays increases, both secrecy rate and the performance of suboptimal relay selection scheme improve significantly. Numerical results are presented to validate the derived analytical results and compare them to existing work.

IEEE Vehicular Technology Conference•Sep 1, 2016•2 citations

Impact Analysis of Imperfect CSIS on Secrecy Performance of Two-Hop Cooperative Communication Networks

Le Tien, Pham Ngoc SON

In this paper, we consider secure communication to analyze the physical layer security over a wireless dual-hop relay system in the presence of an eavesdropper with imperfect channel state information (CSI). In this scheme, the first hop from a source to a relay and the second hop from the relay to a destination is subject to Rayleigh fading. The relay will help to forward data signals from the source to the destination based on achievable secrecy rates. The secrecy performance is exactly evaluated by the secrecy outage probability of the achievable secrecy rates. Numerical examples are provided to corroborate the proposed studies.

International Conference on System Science and Engineering•Jul 1, 2019•0 citations

Physical layer security: Friendly jamming in an untrusted relay scenario

Bakhtiar Qutub Ali, Nida Zamir, Muhammad Fasih +2 more

This paper investigates the achievable secrecy regions when employing a friendly jammer in a cooperative scenario employing an untrusted relay. The untrusted relay which helps to forward the source signal towards the destination, could also be regarded as a potential eavesdropper. Our system employs a friendly jammer which sends a known noise signal towards the relay. In this paper, we investigate the effect of jammer and relay locations on the achievable secrecy rate. We consider two scenarios where in the first case we consider no direct transmission between the source and destination, while in the second case we include a source to destination direct link in our communication system.

European Signal Processing Conference (EUSIPCO)•Aug 1, 2016•13 citations

Two-phase cooperative jamming and beamforming for physical layer secrecy

Mohammad Hatami, Mojtaba Jahandideh, Hamid Behroozi

The broadcast nature of wireless communications makes the propagation medium vulnerable to security attacks such as eavesdropping and jamming from adversarial or unauthorized users. Applying physical layer secrecy approaches will enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers, without using any secret keys. However, physical layer security approaches are typically feasible only when the source-eavesdropper channel is weaker than the source-destination channel. Cooperative jamming can be used to overcome this challenge and increase the secrecy rate. In this paper, the security of two-phase relaying system with multiple intermediate nodes and in the presence of an eavesdropper is investigated. To enhance the system secrecy rate, a joint cooperative beamforming and jamming combined with relay and jammer selections is proposed. In phase I, the source node broadcasts a signal to relays while three intermediate nodes (which act as jammers) help the source node by transmitting random jamming signals to confuse the eavesdropper. Since the friendly (cooperative) jammers create interference for both the intended relays and the eavesdropper, optimal beamforming is applied such that no interference is caused at two preselected desired relays (that are going to receive the confidential massage in phase I). In phase II, two preselected relays transmit the source message with beamforming coefficients such that the received signal at the eavesdropper is completely nulled out. Our goal in this paper is to minimize the received SNR at the eavesdropper while increasing it at the destination as much as possible by applying different methods such as cooperative beamforming, cooperative jamming and relay selection. To avoid operational complexity, we consider the minimum number of intermediate nodes that are necessary without losing the performance. Numerical results demonstrate the advantage of our proposed scheme compared with the scheme with no cooperative jamming.

Iranian Conference on Electrical Engineering•May 1, 2015•2 citations

Secrecy Performance of NOMA-Based Two-Way Communication System at Physical Layer

Shashibhushan Sharma, Kounteya Sarkar, Sudip Misra

Abstract This paper examines physical layer security in a NOMA-based two-way wireless communication system with several decode-and-forward relays and a malicious eavesdropper. We implement a partial relay selection system to maximize the secrecy capacity of a specific user's information signal. Two hops are involved in the communication process because of the half-duplex relay cooperation. A selected relay receives information from two users. The relay strengthens the signals and broadcasts them during the second hop. Additionally, a jammer transmits a jamming signal that is known to all legitimate nodes but appears as noise with the received signals at the eavesdropper. Since legitimate user nodes are already aware of the jamming signal, channel status information, and self-information, they can decode the original information in downlink mode by self-interference and successive interference cancellation. Secrecy outage probability, intercept probability, and secrecy throughput have been investigated as metrics to analyze the security, where the secrecy performance of a particular user is found to increase by $94.66\, \%$ with an increment in transmit SNR of jamming from $60\, dB$ to $70\, dB$ and increases by $90.78\, \%$ with an increment in the number of relays from 2 to 5.

•Apr 1, 2026•0 citations
Two-hop security communication with an eavesdropper in wireless environment is a hot research direction. The basic idea is that the destination, simultaneously with the source, sends a jamming signal to interfere the eavesdropper near to or co-located with the relay. Similar as physical layer network coding, the friendly jamming signal will prevent the eavesdropper from detecting the useful information originated from the source and will not affect the destination on detecting the source information with the presence of the known jamming signal. However, existing investigations are confined to Gaussian distributed signals, which are seldom used in real systems. When finite constellation signals are applied, the behavior of the secrecy rate becomes very different. For example, the secrecy rate depends on phase difference between the input signals with finite constellations, which is not observed with Gaussian signals. In this paper, we investigate the secrecy capacity and derive its upper bound for the two-hop relay model, by assuming an eavesdropper near the relay and the widely used M-PSK modulation. With our upper bound, the best and worst phase differences in high SNR region are then given. Numerical studies verify our analysis and show that the derived upper bound is relatively tight.
We consider a source-destination pair that can communicate only through an unauthenticated intermediate relay node. In this two-hop communication scenario, where the cooperation from the relay node is essential, we investigate whether achieving non-zero secrecy rate is possible. Specifically, we treat the relay node as an eavesdropper from whom the source information needs to be kept secret, despite the fact that its cooperation in relaying this information is needed. We find that a positive secrecy rate is indeed achievable, with the aid of the destination node or an external node that jams the relay, i.e., by cooperative jamming. We derive an upper bound on the secrecy rate by means of an eavesdropper-relay separation argument. We remark that this upper bound is the first of its kind in Gaussian channels with cooperative jamming. The upper bound is strictly smaller than the channel capacity without secrecy constraints. The achievable secrecy rates are found using stochastic encoding and compress-and-forward at the relay. Numerical results show that the gap between the bound and the achievable rate is small when the relay's power is larger than the power of the jammer and the source. In essence, this paper shows that a cooperative jammer enables secure communication to take place using an untrusted relay which would be otherwise impossible.
To improve physical (PHY) layer security of a wireless relay system in the presence of an eavesdropper, a two-phase cooperative relaying scheme is investigated in this paper. In phase I, the source transmits confidential message, simultaneously, it cooperates with the friendly jammers and destination to create jamming signal at the eavesdropper without affecting the forwarding relay which is preselected. In phase II, the forwarding relay retransmits the decoded signal, meanwhile, the particular relay cooperates with the friendly jammers to create jamming signal at the eavesdropper without affecting the destination. We focus on the investigation of optimal power allocation for maximizing achievable secrecy rate subject to a total power constraint. Optimal relay selection and suboptimal relay selection schemes are also proposed. It is shown that as the number of relays increases, both secrecy rate and the performance of suboptimal relay selection scheme improve significantly. Numerical results are presented to validate the derived analytical results and compare them to existing work.
In this paper, we consider secure communication to analyze the physical layer security over a wireless dual-hop relay system in the presence of an eavesdropper with imperfect channel state information (CSI). In this scheme, the first hop from a source to a relay and the second hop from the relay to a destination is subject to Rayleigh fading. The relay will help to forward data signals from the source to the destination based on achievable secrecy rates. The secrecy performance is exactly evaluated by the secrecy outage probability of the achievable secrecy rates. Numerical examples are provided to corroborate the proposed studies.
This paper investigates the achievable secrecy regions when employing a friendly jammer in a cooperative scenario employing an untrusted relay. The untrusted relay which helps to forward the source signal towards the destination, could also be regarded as a potential eavesdropper. Our system employs a friendly jammer which sends a known noise signal towards the relay. In this paper, we investigate the effect of jammer and relay locations on the achievable secrecy rate. We consider two scenarios where in the first case we consider no direct transmission between the source and destination, while in the second case we include a source to destination direct link in our communication system.
The broadcast nature of wireless communications makes the propagation medium vulnerable to security attacks such as eavesdropping and jamming from adversarial or unauthorized users. Applying physical layer secrecy approaches will enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers, without using any secret keys. However, physical layer security approaches are typically feasible only when the source-eavesdropper channel is weaker than the source-destination channel. Cooperative jamming can be used to overcome this challenge and increase the secrecy rate. In this paper, the security of two-phase relaying system with multiple intermediate nodes and in the presence of an eavesdropper is investigated. To enhance the system secrecy rate, a joint cooperative beamforming and jamming combined with relay and jammer selections is proposed. In phase I, the source node broadcasts a signal to relays while three intermediate nodes (which act as jammers) help the source node by transmitting random jamming signals to confuse the eavesdropper. Since the friendly (cooperative) jammers create interference for both the intended relays and the eavesdropper, optimal beamforming is applied such that no interference is caused at two preselected desired relays (that are going to receive the confidential massage in phase I). In phase II, two preselected relays transmit the source message with beamforming coefficients such that the received signal at the eavesdropper is completely nulled out. Our goal in this paper is to minimize the received SNR at the eavesdropper while increasing it at the destination as much as possible by applying different methods such as cooperative beamforming, cooperative jamming and relay selection. To avoid operational complexity, we consider the minimum number of intermediate nodes that are necessary without losing the performance. Numerical results demonstrate the advantage of our proposed scheme compared with the scheme with no cooperative jamming.
Abstract This paper examines physical layer security in a NOMA-based two-way wireless communication system with several decode-and-forward relays and a malicious eavesdropper. We implement a partial relay selection system to maximize the secrecy capacity of a specific user's information signal. Two hops are involved in the communication process because of the half-duplex relay cooperation. A selected relay receives information from two users. The relay strengthens the signals and broadcasts them during the second hop. Additionally, a jammer transmits a jamming signal that is known to all legitimate nodes but appears as noise with the received signals at the eavesdropper. Since legitimate user nodes are already aware of the jamming signal, channel status information, and self-information, they can decode the original information in downlink mode by self-interference and successive interference cancellation. Secrecy outage probability, intercept probability, and secrecy throughput have been investigated as metrics to analyze the security, where the secrecy performance of a particular user is found to increase by 94.66 %94.66\, \%94.66% with an increment in transmit SNR of jamming from 60 dB60\, dB60dB to 70 dB70\, dB70dB and increases by 90.78 %90.78\, \%90.78% with an increment in the number of relays from 2 to 5.