Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1309.0023 · Optics Express

Arrays of open, independently tunable microcavities

Christian G. Derntl, Michael Schneider, J. Schalko, Achim Bittner, Jörg Schmiedmayer, U. Schmid, Michael Trupke

Published Sep 4, 2014• 34 citations
arXivHTMLPDF

Abstract

Optical cavities are of central importance in numerous areas of physics, including precision measurement, cavity optomechanics and cavity quantum electrodynamics. The miniaturisation and scaling to large numbers of sites is of interest for many of these applications, in particular for quantum computation and simulation. Here we present the first scaled microcavity system which enables the creation of large numbers of highly uniform, tunable light-matter interfaces using ions, neutral atoms or solid-state qubits. The microcavities are created by means of silicon micro-fabrication, are coupled directly to optical fibres and can be independently tuned to the chosen frequency, paving the way for arbitrarily large networks of optical microcavities.

DOI
10.1364/oe.22.022111

Related papers

Multi-resonant open-access microcavity arrays for light matter interaction

Thomas H. Doherty, Axel Kuhn, Ezra Kassa

We report the realisation of a high-finesse open-access cavity array, tailored towards the creation of multiple coherent light-matter interfaces within a compact environment. We describe the key technical developments put in place to fabricate such a system, comprising the creation of tapered pyramidal substrates and an in-house laser machining setup. Cavities made from these mirrors are characterised, by laser spectroscopy, to possess similar optical properties to state-of-the-art fibre-tip cavities, but offer a compelling route towards improved performance, even when used to support only a single mode. The implementation of a 2×2 cavity array and the independent frequency tuning between three neighbouring sites are demonstrated.

arXiv:2207.03676•Optics Express•Jan 16, 2023•9 citations

Tunable open-access microcavities for on-chip cavity quantum electrodynamics

C. A. Potts, A. Melnyk, H. Ramp +5 more

We report on the development of on-chip microcavities and show their potential as a platform for cavity quantum electrodynamics experiments. Microcavity arrays were formed by the controlled buckling of SiO2/Ta2O5 Bragg mirrors and exhibit a reflectance-limited finesse of 3500 and mode volumes as small as 35λ3. We show that the cavity resonance can be thermally tuned into alignment with the D2 transition of 87Rb and outline two methods for providing atom access to the cavity. Owing to their small mode volume and high finesse, these cavities exhibit single-atom cooperativities as high as C1=65. A unique feature of the buckled-dome architecture is that the strong-coupling parameter g0/κ is nearly independent of the cavity size. Furthermore, strong coupling should be achievable with only modest improvements in mirror reflectance, suggesting that these monolithic devices could provide a robust and scalable solution to the engineering of light-matter interfaces.

arXiv:1601.03344•Applied Physics Letters•Jan 25, 2016•21 citations

A Compact, Robust, and Tunable Open Microcavity Platform for Solid-State Quantum Electrodynamics

Thi D. Hoang, Fateme Mahdikhany, Zixuan Wang +4 more

Open microcavities provide a powerful platform for studying cavity quantum electrodynamics in solid-state systems. However, operating open microcavities at cryogenic temperatures, as required for many solid-state quantum emitters, typically demands bulky and cryostat-specific vibration-mitigation setups. Here we report a compact, robust, and tunable mechanical host for an open microcavity. The complete mechanical assembly fits within a footprint of $1'' \times 1'' \times 0.5''$. Using this mechanical host, we observe no vibration-induced cavity broadening for an open microcavity with finesse exceeding 1,000 without cryostat customization or active locking. The assembly also enables in situ tuning of the cavity resonance over 3 nm, and the resonance of the same cavity remains within this range across multiple cooldowns. To further showcase the capability of this assembly, we demonstrate coupling between an InGaAs quantum dot and an open microcavity with a cooperativity exceeding unity. This platform provides a versatile testbed for fundamental cavity quantum electrodynamics and a scalable route to portable quantum light sources and spin-photon interfaces for quantum repeaters, quantum networks, and photonic quantum computing.

quant-pharXiv:2605.16694•May 19, 2026

Integrated optics for coupled-cavity quantum electrodynamics

Guillaume Lepert

This thesis reports on the development of an array of plane-concave Fabry-Perot microcavities containing atoms (or other quantum emitters), interconnected by UV-written waveguides on a silica-on-silicon chip. The microcavities are formed by a mirror coated on the end facet of the chip and an array of spherical micromirrors etched on silicon. This is to our knowledge the first attempt at implementing the emerging coupled-cavities QED paradigm. The device we propose possesses a degree of control, flexibility and tuning unmatched in other suggested implementations: The atoms can be manipulated inside the cavity by auxiliary lasers and the cavity-cavity coupling rate as well as the atom-cavity coupling can be tuned. It is highly scalable. Calculation of the complete (classical) optical spectrum of the device is presented. The quantum dynamics that may eventually be observed has also been studied. Waveguide chips containing couplers and phase shifter have been fabricated. We have successfully demonstrated the operation of the elementary sub-systems: the strong optical coupling between a microcavity and a waveguide resonator, and the tunable strong coupling between two evanescently coupled waveguide resonators. No experiments with atoms or other quantum emitters were attempted, because the waveguide propagation loss is so large that no quantum physics can be observed. There is hope that this can be overcome in the future by using other waveguide technologies.

•Jan 1, 2013•2 citations

Laser trapping of atoms and cavity quantum electrodynamics in fibre-tip microcavities

Dong, Jian

Constructing a quantum network comprising of matter-based stationary qubits and photonic flying qubits is a key goal towards scalable quantum computing. Individually trapped neutral atoms are amongst the most promising candidates for stationary qubits, while single photons emitted from optical cavities appears to be the best approach to forming flying qubits. This thesis presents a fast and versatile method to trap and transport an array of neutral atoms, with the aid of a spatial light modulator (SLM). We demonstrate trapped 87Rb atoms adapting to the arbitrary and dynamic potential landscapes imposed by the SLM. On top of this we also investigate the inclusion of fibre-tip cavities into the experiment. In these microcavities, the mirrors are replaced by ablated fibre-tip faces, coated in a highly reflective dielectric stack. These have the benefit of small geometries, increasing their scalability; which in turns leads to extremely small mode volumes, allowing for strong coupling with atoms inside the cavity modes. We construct and characterise a high finesse ℱ = 120, 000 fibre-tip cavity constructed from two single mode fibres.

•Jan 1, 2014•0 citations

Femtoliter tunable optical cavity arrays

Philip R. Dolan, Gareth M. Hughes, Fabio Grazioso +2 more

Large arrays of uniform, precisely tunable, open-access optical microcavities with mode volumes as small as 2.2 μm(3) are reported. The cavities show clear Hermite-Gauss mode structure and display finesses up to 460, in addition to quality (Q) factors in excess of 10,000. The cavities are attractive for use in quantum optics applications, such as single atom detection and efficient single photon sources, and have potential to be extended for experiments in the strong coupling regime.

Optics Letters•Oct 19, 2010•98 citations
Optical cavities are of central importance in numerous areas of physics, including precision measurement, cavity optomechanics and cavity quantum electrodynamics. The miniaturisation and scaling to large numbers of sites is of interest for many of these applications, in particular for quantum computation and simulation. Here we present the first scaled microcavity system which enables the creation of large numbers of highly uniform, tunable light-matter interfaces using ions, neutral atoms or solid-state qubits. The microcavities are created by means of silicon micro-fabrication, are coupled directly to optical fibres and can be independently tuned to the chosen frequency, paving the way for arbitrarily large networks of optical microcavities.
We report the realisation of a high-finesse open-access cavity array, tailored towards the creation of multiple coherent light-matter interfaces within a compact environment. We describe the key technical developments put in place to fabricate such a system, comprising the creation of tapered pyramidal substrates and an in-house laser machining setup. Cavities made from these mirrors are characterised, by laser spectroscopy, to possess similar optical properties to state-of-the-art fibre-tip cavities, but offer a compelling route towards improved performance, even when used to support only a single mode. The implementation of a 2×2 cavity array and the independent frequency tuning between three neighbouring sites are demonstrated.
We report on the development of on-chip microcavities and show their potential as a platform for cavity quantum electrodynamics experiments. Microcavity arrays were formed by the controlled buckling of SiO2/Ta2O5 Bragg mirrors and exhibit a reflectance-limited finesse of 3500 and mode volumes as small as 35λ3. We show that the cavity resonance can be thermally tuned into alignment with the D2 transition of 87Rb and outline two methods for providing atom access to the cavity. Owing to their small mode volume and high finesse, these cavities exhibit single-atom cooperativities as high as C1=65. A unique feature of the buckled-dome architecture is that the strong-coupling parameter g0/κ is nearly independent of the cavity size. Furthermore, strong coupling should be achievable with only modest improvements in mirror reflectance, suggesting that these monolithic devices could provide a robust and scalable solution to the engineering of light-matter interfaces.
Open microcavities provide a powerful platform for studying cavity quantum electrodynamics in solid-state systems. However, operating open microcavities at cryogenic temperatures, as required for many solid-state quantum emitters, typically demands bulky and cryostat-specific vibration-mitigation setups. Here we report a compact, robust, and tunable mechanical host for an open microcavity. The complete mechanical assembly fits within a footprint of 1′′×1′′×0.5′′1'' \times 1'' \times 0.5''1′′×1′′×0.5′′. Using this mechanical host, we observe no vibration-induced cavity broadening for an open microcavity with finesse exceeding 1,000 without cryostat customization or active locking. The assembly also enables in situ tuning of the cavity resonance over 3 nm, and the resonance of the same cavity remains within this range across multiple cooldowns. To further showcase the capability of this assembly, we demonstrate coupling between an InGaAs quantum dot and an open microcavity with a cooperativity exceeding unity. This platform provides a versatile testbed for fundamental cavity quantum electrodynamics and a scalable route to portable quantum light sources and spin-photon interfaces for quantum repeaters, quantum networks, and photonic quantum computing.
This thesis reports on the development of an array of plane-concave Fabry-Perot microcavities containing atoms (or other quantum emitters), interconnected by UV-written waveguides on a silica-on-silicon chip. The microcavities are formed by a mirror coated on the end facet of the chip and an array of spherical micromirrors etched on silicon. This is to our knowledge the first attempt at implementing the emerging coupled-cavities QED paradigm. The device we propose possesses a degree of control, flexibility and tuning unmatched in other suggested implementations: The atoms can be manipulated inside the cavity by auxiliary lasers and the cavity-cavity coupling rate as well as the atom-cavity coupling can be tuned. It is highly scalable. Calculation of the complete (classical) optical spectrum of the device is presented. The quantum dynamics that may eventually be observed has also been studied. Waveguide chips containing couplers and phase shifter have been fabricated. We have successfully demonstrated the operation of the elementary sub-systems: the strong optical coupling between a microcavity and a waveguide resonator, and the tunable strong coupling between two evanescently coupled waveguide resonators. No experiments with atoms or other quantum emitters were attempted, because the waveguide propagation loss is so large that no quantum physics can be observed. There is hope that this can be overcome in the future by using other waveguide technologies.
Constructing a quantum network comprising of matter-based stationary qubits and photonic flying qubits is a key goal towards scalable quantum computing. Individually trapped neutral atoms are amongst the most promising candidates for stationary qubits, while single photons emitted from optical cavities appears to be the best approach to forming flying qubits. This thesis presents a fast and versatile method to trap and transport an array of neutral atoms, with the aid of a spatial light modulator (SLM). We demonstrate trapped 87Rb atoms adapting to the arbitrary and dynamic potential landscapes imposed by the SLM. On top of this we also investigate the inclusion of fibre-tip cavities into the experiment. In these microcavities, the mirrors are replaced by ablated fibre-tip faces, coated in a highly reflective dielectric stack. These have the benefit of small geometries, increasing their scalability; which in turns leads to extremely small mode volumes, allowing for strong coupling with atoms inside the cavity modes. We construct and characterise a high finesse ℱ = 120, 000 fibre-tip cavity constructed from two single mode fibres.