Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1308.1331 · Physical Review A

Principles of an atomtronic battery

Alex A. Zozulya, Dana Z. Anderson

Published Oct 29, 2013• 31 citations
arXivHTMLPDF

Abstract

An asymmetric atom trap is investigated as a means to implement a ``battery'' that supplies ultracold atoms to an atomtronic circuit. The battery model is derived from a scheme for continuous loading of a nondissipative atom trap proposed by Roos et al. [C. F. Roos, P. Cren, D. Guery-Odelin, and J. Dalibard, Europhys. Lett. 61, 187 (2003)]. The trap is defined by longitudinal and transverse trap frequencies ${f}_{z}$ and ${f}_{\ensuremath{\perp}}$ and corresponding trap energy heights ${U}_{z}$ and ${U}_{\ensuremath{\perp}}$. The battery's ability to supply power to a load is evaluated as a function of an input atom flux and power, ${I}_{\mathrm{in}}$ and ${P}_{\mathrm{in}}={I}_{\mathrm{in}}(1+\ensuremath{\epsilon}){U}_{z}$, respectively, where $\ensuremath{\epsilon}$ is an excess fractional energy. For given trap parameters, the battery is shown to have a resonantly optimum value of $\ensuremath{\epsilon}$. The battery behavior can be cast in terms of an equivalent circuit model; specifically, for fixed input flux and power the battery is modeled in terms of a Th\'evenin equivalent chemical potential and internal resistance. The internal resistance establishes the maximum power that can be supplied to a circuit, the heat that will be generated by the battery, and the noise that will be imposed on the circuit. We argue that any means of implementing a battery for atomtronics can be represented by a Th\'evenin equivalent and that its performance will likewise be determined by an internal resistance.

DOI
10.1103/physreva.88.043641

Related papers

Dynamics of Atomtronic Battery

Hongji Yu

Atomtronics studies cold atom analogs of electric circuits. An ultra-cold Bose gas cloud trapped in a specially shaped trap can serve as a “battery” for such a circuit. We investigate the behavior of this system at different loads. We first perform a bifurcation analysis with respect to the adjustable out-coupling parameter, finding a domain where stable solutions exist and a range of initial conditions that converge to stable equilibria. We also look at the relation between the load current and chemical potential, which gives the I-V relation of the battery,and find that the model resembles an electronic battery well at low loads, but shows negative resistance at high loads. Finally we look at a few typical dynamic simulations of the system when the out-coupling strength varies in time.

•Jan 1, 2016•0 citations

Experimental demonstration of an atomtronic battery

Seth C. Caliga, Cameron Straatsma, Dana Z. Anderson

Operation of an atomtronic battery is demonstrated where a finite-temperature Bose–Einstein condensate stored in one half of a double-well potential is coupled to an initially empty load well that is impedance matched by a resonant terminator beam. The atom number and temperature of the condensate are monitored during the discharge cycle, and are used to calculate fundamental properties of the battery. The discharge behavior is analyzed according to a Thévenin equivalent circuit that contains a finite internal resistance to account for dissipation in the battery. Battery performance at multiple discharge rates is characterized by the peak power output, and the current and energy capacities of the system.

arXiv:1701.06590•New Journal of Physics•Jan 5, 2017•34 citations

Atomtronics: Ultracold-atom analogs of electronic devices

B. T. Seaman, Meret Krämer, Dana Z. Anderson +1 more

Atomtronics focuses on atom analogs of electronic materials, devices, and circuits. A strongly interacting ultracold Bose gas in a lattice potential is analogous to electrons in solid-state crystalline media. As a consequence of the gapped many-body energy spectrum, cold atoms in a lattice exhibit insulatorlike or conductorlike properties. $P$-type and $N$-type material analogs are created by introducing impurity sites into the lattice. Current through an atomtronic wire is generated by connecting the wire to an atomtronic battery which maintains the two contacts at different chemical potentials. The design of an atomtronic diode with a strongly asymmetric current-voltage curve exploits the existence of superfluid and insulating regimes in the phase diagram. The atom analog of a bipolar junction transistor exhibits large negative gain. Our results provide the building blocks for more advanced atomtronic devices and circuits such as amplifiers, oscillators, and fundamental logic gates.

arXiv:cond-mat/0606625•Physical Review A•Feb 20, 2007•267 citations

Experimental Realization of Atomtronic Circuit Elements in Non-Equilibrium Ultracold Atomic Systems

Seth C. Caliga

Research in the field of atomtronics aims to develop a new paradigm for the use of ultracold atomic systems in a manner that mimics the functionality of electronic circuits and devices. Given the ubiquity of the electronic transistor and its application to a vast array of signal processing tasks, the development of its atomtronic counterpart is of significant interest. This dissertation presents the experimental studies of two atomtronic circuit elements: a battery and transistor. Experiments are conducted in an atom-chip-based apparatus utilizing hybrid magnetic and optical trapping techniques that enable one to "pattern" atomtronic circuit elements. An atomtronic battery is realized in a double-well trapping potential in which a finite-temperature Bose-Einstein condensate is prepared in a non-equilibrium state to generate thermodynamic gradients that drive atom current flow. Powered by the atomtronic battery, a triple-well atomtronic transistor is demonstrated, and quasi-steady-state behavior of the device is characterized. Results are found to be in agreement with a semiclassical model of the transistor that is also used to study the active properties of the device, including current gain. Based on these results, future directions regarding signal processing operations are proposed.

•Jan 1, 2016•0 citations

Principles of an atomtronic transistor

Seth C. Caliga, Cameron Straatsma, Alex A. Zozulya +1 more

A semiclassical formalism is used to investigate the transistor-like behavior of ultracold atoms in a triple-well potential. Atom current flows from the source well, held at fixed chemical potential and temperature, into an empty drain well. In steady-state, the gate well located between the source and drain is shown to acquire a well-defined chemical potential and temperature, which are controlled by the relative height of the barriers separating the three wells. It is shown that the gate chemical potential can exceed that of the source and have a lower temperature. In electronics terminology, the source–gate junction can be reverse-biased. As a result, the device exhibits regimes of negative resistance and transresistance, indicating the presence of gain. Given an external current input to the gate, transistor-like behavior is characterized both in terms of the current gain, which can be greater than unity, and the power output of the device.

arXiv:1512.04422•New Journal of Physics•Jan 18, 2016•36 citations

Quantum battery with ultracold atoms: Bosons versus fermions

Tanoy Kanti Konar, Leela Ganesh Chandra Lakkaraju, Srijon Ghosh +1 more

We design a quantum battery made up of bosons or fermions in an ultracold-atom setup, described by Fermi-Hubbard and Bose-Hubbard models, respectively. We compare the performance of bosons and fermions to determine which can function as a quantum battery more effectively given a particular on-site interaction and initial state temperature. The performance of a quantum battery is quantified by the maximum energy stored per unit time over the evolution under an on-site charging Hamiltonian. We report that when the initial battery state is in the ground state, fermions outperform bosons in a certain configuration over a large range of on-site interactions which are shown analytically for a smaller number of lattice sites and numerically for a considerable number of sites. Bosons take the lead when the temperature is comparatively high in the initial state for a longer range of on-site interaction. We study a number of up and down fermions as well as the number of bosons per site to find the optimal filling factor for maximizing the average power of the battery. We also introduce disorder in both on-site and hopping parameters and demonstrate that the maximum average power is robust against impurities. Moreover, we identify a range of tuning parameters in the fermionic and bosonic systems where the disorder-enhanced power is observed.

arXiv:2109.06816•Physical Review A•Aug 29, 2022•49 citations
An asymmetric atom trap is investigated as a means to implement a ``battery'' that supplies ultracold atoms to an atomtronic circuit. The battery model is derived from a scheme for continuous loading of a nondissipative atom trap proposed by Roos et al. [C. F. Roos, P. Cren, D. Guery-Odelin, and J. Dalibard, Europhys. Lett. 61, 187 (2003)]. The trap is defined by longitudinal and transverse trap frequencies fz{f}_{z}fz​ and f\ensuremath⊥{f}_{\ensuremath{\perp}}f\ensuremath⊥​ and corresponding trap energy heights Uz{U}_{z}Uz​ and U\ensuremath⊥{U}_{\ensuremath{\perp}}U\ensuremath⊥​. The battery's ability to supply power to a load is evaluated as a function of an input atom flux and power, Iin{I}_{\mathrm{in}}Iin​ and Pin=Iin(1+\ensuremathϵ)Uz{P}_{\mathrm{in}}={I}_{\mathrm{in}}(1+\ensuremath{\epsilon}){U}_{z}Pin​=Iin​(1+\ensuremathϵ)Uz​, respectively, where \ensuremathϵ\ensuremath{\epsilon}\ensuremathϵ is an excess fractional energy. For given trap parameters, the battery is shown to have a resonantly optimum value of \ensuremathϵ\ensuremath{\epsilon}\ensuremathϵ. The battery behavior can be cast in terms of an equivalent circuit model; specifically, for fixed input flux and power the battery is modeled in terms of a Th'evenin equivalent chemical potential and internal resistance. The internal resistance establishes the maximum power that can be supplied to a circuit, the heat that will be generated by the battery, and the noise that will be imposed on the circuit. We argue that any means of implementing a battery for atomtronics can be represented by a Th'evenin equivalent and that its performance will likewise be determined by an internal resistance.
Atomtronics studies cold atom analogs of electric circuits. An ultra-cold Bose gas cloud trapped in a specially shaped trap can serve as a “battery” for such a circuit. We investigate the behavior of this system at different loads. We first perform a bifurcation analysis with respect to the adjustable out-coupling parameter, finding a domain where stable solutions exist and a range of initial conditions that converge to stable equilibria. We also look at the relation between the load current and chemical potential, which gives the I-V relation of the battery,and find that the model resembles an electronic battery well at low loads, but shows negative resistance at high loads. Finally we look at a few typical dynamic simulations of the system when the out-coupling strength varies in time.
Operation of an atomtronic battery is demonstrated where a finite-temperature Bose–Einstein condensate stored in one half of a double-well potential is coupled to an initially empty load well that is impedance matched by a resonant terminator beam. The atom number and temperature of the condensate are monitored during the discharge cycle, and are used to calculate fundamental properties of the battery. The discharge behavior is analyzed according to a Thévenin equivalent circuit that contains a finite internal resistance to account for dissipation in the battery. Battery performance at multiple discharge rates is characterized by the peak power output, and the current and energy capacities of the system.
Atomtronics focuses on atom analogs of electronic materials, devices, and circuits. A strongly interacting ultracold Bose gas in a lattice potential is analogous to electrons in solid-state crystalline media. As a consequence of the gapped many-body energy spectrum, cold atoms in a lattice exhibit insulatorlike or conductorlike properties. PPP-type and NNN-type material analogs are created by introducing impurity sites into the lattice. Current through an atomtronic wire is generated by connecting the wire to an atomtronic battery which maintains the two contacts at different chemical potentials. The design of an atomtronic diode with a strongly asymmetric current-voltage curve exploits the existence of superfluid and insulating regimes in the phase diagram. The atom analog of a bipolar junction transistor exhibits large negative gain. Our results provide the building blocks for more advanced atomtronic devices and circuits such as amplifiers, oscillators, and fundamental logic gates.
Research in the field of atomtronics aims to develop a new paradigm for the use of ultracold atomic systems in a manner that mimics the functionality of electronic circuits and devices. Given the ubiquity of the electronic transistor and its application to a vast array of signal processing tasks, the development of its atomtronic counterpart is of significant interest. This dissertation presents the experimental studies of two atomtronic circuit elements: a battery and transistor. Experiments are conducted in an atom-chip-based apparatus utilizing hybrid magnetic and optical trapping techniques that enable one to "pattern" atomtronic circuit elements. An atomtronic battery is realized in a double-well trapping potential in which a finite-temperature Bose-Einstein condensate is prepared in a non-equilibrium state to generate thermodynamic gradients that drive atom current flow. Powered by the atomtronic battery, a triple-well atomtronic transistor is demonstrated, and quasi-steady-state behavior of the device is characterized. Results are found to be in agreement with a semiclassical model of the transistor that is also used to study the active properties of the device, including current gain. Based on these results, future directions regarding signal processing operations are proposed.
A semiclassical formalism is used to investigate the transistor-like behavior of ultracold atoms in a triple-well potential. Atom current flows from the source well, held at fixed chemical potential and temperature, into an empty drain well. In steady-state, the gate well located between the source and drain is shown to acquire a well-defined chemical potential and temperature, which are controlled by the relative height of the barriers separating the three wells. It is shown that the gate chemical potential can exceed that of the source and have a lower temperature. In electronics terminology, the source–gate junction can be reverse-biased. As a result, the device exhibits regimes of negative resistance and transresistance, indicating the presence of gain. Given an external current input to the gate, transistor-like behavior is characterized both in terms of the current gain, which can be greater than unity, and the power output of the device.
We design a quantum battery made up of bosons or fermions in an ultracold-atom setup, described by Fermi-Hubbard and Bose-Hubbard models, respectively. We compare the performance of bosons and fermions to determine which can function as a quantum battery more effectively given a particular on-site interaction and initial state temperature. The performance of a quantum battery is quantified by the maximum energy stored per unit time over the evolution under an on-site charging Hamiltonian. We report that when the initial battery state is in the ground state, fermions outperform bosons in a certain configuration over a large range of on-site interactions which are shown analytically for a smaller number of lattice sites and numerically for a considerable number of sites. Bosons take the lead when the temperature is comparatively high in the initial state for a longer range of on-site interaction. We study a number of up and down fermions as well as the number of bosons per site to find the optimal filling factor for maximizing the average power of the battery. We also introduce disorder in both on-site and hopping parameters and demonstrate that the maximum average power is robust against impurities. Moreover, we identify a range of tuning parameters in the fermionic and bosonic systems where the disorder-enhanced power is observed.