Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1306.6894 · Superconductor Science and Technology

Optimized controlled-Z gates for two superconducting qubits coupled through a resonator

Daniel J. Egger, Frank K. Wilhelm

Published Nov 26, 2013• 72 citations
arXivHTMLPDF

Abstract

Superconducting qubits are promising candidates for building a quantum computer. A continued challenge for fast yet accurate gates is to minimize the effects of decoherence. Here we apply numerical methods to design fast entangling gates, specifically the controlled-Z, in an architecture where two qubits are coupled via a resonator. We find that the gates can be sped up by a factor of two and reach any target fidelity. We also discuss how systematic errors arising from experimental conditions affect the pulses and how to remedy them, providing a strategy for the experimental implementation of our results. We discuss the shape of the pulses, their spectrum and symmetry.

DOI
10.1088/0953-2048/27/1/014001

Related papers

High-fidelity controlled- σZ gate for resonator-based superconducting quantum computers

Joydip Ghosh, Andrei Galiautdinov, Zhongyuan Zhou +3 more

A possible building block for a scalable quantum computer has recently been demonstrated [Mariantoni et al., Science 334, 61 (2011)]. This architecture consists of superconducting qubits capacitively coupled both to individual memory resonators as well as a common bus. In this work we study a natural primitive entangling gate for this and related resonator-based architectures, which consists of a controlled-${\ensuremath{\sigma}}^{z}$ (cz) operation between a qubit and the bus. The cz gate is implemented with the aid of the noncomputational qubit $|2\ensuremath{\rangle}$ state [Strauch et al., Phys. Rev. Lett. 91, 167005 (2003)]. Assuming phase or transmon qubits with 300 MHz anharmonicity, we show that by using only low frequency qubit-bias control it is possible to implement the qubit-bus cz gate with 99.9$%$ (99.99$%$) fidelity in about $17\phantom{\rule{0.16em}{0ex}}\mathrm{ns}$ ($23\phantom{\rule{0.16em}{0ex}}\mathrm{ns}$) with a realistic two-parameter pulse profile, plus two auxiliary $z$ rotations. The fidelity measure we refer to here is a state-averaged intrinsic process fidelity, which does not include any effects of noise or decoherence. These results apply to a multiqubit device that includes strongly coupled memory resonators. We investigate the performance of the qubit-bus cz gate as a function of qubit anharmonicity, identify the dominant intrinsic error mechanism and derive an associated fidelity estimator, quantify the pulse shape sensitivity and precision requirements, simulate qubit-qubit cz gates that are mediated by the bus resonator, and also attempt a global optimization of system parameters including resonator frequencies and couplings. Our results are relevant for a wide range of superconducting hardware designs that incorporate resonators and suggest that it should be possible to demonstrate a $99.9%$ cz gate with existing transmon qubits, which would constitute an important step towards the development of an error-corrected superconducting quantum computer.

arXiv:1301.1719•Physical Review A•Feb 8, 2013•94 citations

Closed-loop optimization for high-fidelity controlled- Z gates in superconducting qubits

N.J. Glaser, Federico Roy, Ivan Tsitsilin +13 more

Achieving fast and high-fidelity qubit operations is crucial for unlocking the potential of quantum computers. In particular, reaching low gate errors in two-qubit gates has been a long-standing challenge in the field of superconducting qubits due to their typically long duration relative to coherence times. To realize fast gates, we use the hybridization between fixed-frequency superconducting qubits with a strongly interacting coupler mode that is tunable in frequency. To reduce population leakage during required adiabatic passages through avoided level crossings, we employ a sensitivity-adaptive closed-loop optimization method to design complex pulse shapes. We compare the performance of Gaussian-square, Fourier-series, and piecewise-constant-slope pulse parametrizations and are able to reach 99.9% controlled- Z -gate fidelity using a 64-ns-long Fourier-series pulse defined by only seven parameters. These high-fidelity values are achieved by analyzing the optimized pulse shapes to identify and systematically mitigate signal-line distortions in the experiment. To improve the convergence speed of the optimization, we implement an adaptive cost function, which continuously maximizes the sensitivity. The demonstrated method can be used for tune-up and recalibration of superconducting quantum processors.

arXiv:2412.17454•Physical Review Applied•Jul 15, 2025•12 citations

Fast microwave-driven three-qubit gates for cavity-coupled superconducting qubits

Edwin Barnes, Christian Arenz, Alexander Pitchford +1 more

Although single- and two-qubit gates are sufficient for universal quantum computation, single-shot three-qubit gates greatly simplify quantum error correction schemes and algorithms. We design fast, high-fidelity three-qubit entangling gates based on microwave pulses for transmon qubits coupled through a superconducting resonator. We show that when interqubit frequency differences are comparable to single-qubit anharmonicities, errors occur primarily through a single unwanted transition. This feature enables the design of fast three-qubit gates based on simple analytical pulse shapes that are engineered to minimize such errors. We show that a three-qubit ccz gate can be performed in 260 ns with fidelities exceeding $99.38%$, or $99.99%$ with numerical optimization.

arXiv:1612.09384•Physical review. B./Physical review. B•Jul 6, 2017•34 citations

Minimal time robust control for two superconducting qubits

Niril George, Joseph L. Allen, Robert L. Kosut +1 more

High-fidelity quantum gates are crucial for achieving fault-tolerant quantum computing; however, decoherence significantly reduces gate fidelities during long operation times. Although optimal control techniques can theoretically minimize these operation times, they often neglect realistic uncertainties in system parameters. In this work, we demonstrate that by using robust optimal control strategies, the cross-resonance gate in superconducting systems can be operated within 64 ns, achieving fidelities of [Formula: see text] while maintaining robustness against up to 10% uncertainty in a single parameter. Alternatively, by extending the control time to 71 ns, we achieve fidelities of [Formula: see text] with robustness against up to 3% uncertainty. Our results identify the minimal control times attainable with experimentally feasible pulses and system parameters, as well as the maximum allowable static parameter error for high-fidelity operations. Furthermore, we demonstrate simultaneous robustness against both static and time-dependent errors by generating 100 ns control pulses ([Formula: see text]) that maintain robustness against 10% static parameter error and time-dependent parameter fluctuations two orders of magnitude stronger than typical experimental noise. These findings demonstrate a viable open-loop strategy for implementing fast, high-fidelity quantum gates in the presence of realistic system uncertainties that would otherwise degrade conventional control pulses.

arXiv:1902.08056•Scientific Reports•Dec 24, 2025•8 citations

Methods and Results for Quantum Optimal Pulse Control on Superconducting Qubit Systems

Elisha S. Matekole, Yao-Lung Leo Fang, Meifeng Lin

The effective use of current Noisy Intermediate-Scale Quantum (NISQ) devices is often limited by the noise which is caused by interaction with the environment and affects the fidelity of quantum gates. In transmon qubit systems, the quantum gate fidelity can be improved by applying control pulses that can minimize the effects of the environmental noise. In this work, we employ physics-guided quantum optimal control strategies to design optimal pulses driving quantum gates on superconducting qubit systems. We test our results by conducting experiments on the IBM quantum hardware using their OpenPulse API. We compare the performance of our pulse-optimized quantum gates against the default quantum gates and show that the optimized pulses improve the fidelity of the quantum gates, in particular the single-qubit gates. We discuss the challenges we encountered in our work and point to possible future improvements.

arXiv:2202.03260•IEEE International Symposium on Parallel & Distributed Processing, Workshops and Phd Forum•May 1, 2022•7 citations

Controlled-Controlled-Phase Gates for Superconducting Qubits Mediated by a Shared Tunable Coupler

Niklas J. Glaser, Federico Roy, Stefan Filipp

Applications for noisy intermediate-scale quantum computing devices rely on the efficient entanglement of many qubits to reach a potential quantum advantage. Although entanglement is typically generated using two-qubit gates, direct control of strong multiqubit interactions can improve the efficiency of the process. Here, we investigate a system of three superconducting transmon-type qubits coupled via a single flux-tunable coupler. Tuning the frequency of the coupler by adiabatic flux pulses enables us to control the conditional energy shifts between the qubits and directly realize multiqubit interactions. To accurately adjust the resulting controlled relative phases, we describe a gate protocol involving refocusing pulses and adjustable interaction times. This enables the implementation of the full family of pairwise controlled-phase and controlled-controlled-phase gates. Numerical simulations result in fidelities around 99% and gate times below 300 ns using currently achievable system parameters and decoherence rates.

arXiv:2206.12392•Physical Review Applied•Apr 3, 2023•31 citations
Superconducting qubits are promising candidates for building a quantum computer. A continued challenge for fast yet accurate gates is to minimize the effects of decoherence. Here we apply numerical methods to design fast entangling gates, specifically the controlled-Z, in an architecture where two qubits are coupled via a resonator. We find that the gates can be sped up by a factor of two and reach any target fidelity. We also discuss how systematic errors arising from experimental conditions affect the pulses and how to remedy them, providing a strategy for the experimental implementation of our results. We discuss the shape of the pulses, their spectrum and symmetry.
A possible building block for a scalable quantum computer has recently been demonstrated [Mariantoni et al., Science 334, 61 (2011)]. This architecture consists of superconducting qubits capacitively coupled both to individual memory resonators as well as a common bus. In this work we study a natural primitive entangling gate for this and related resonator-based architectures, which consists of a controlled-${\ensuremath{\sigma}}^{z}$ (cz) operation between a qubit and the bus. The cz gate is implemented with the aid of the noncomputational qubit $|2\ensuremath{\rangle}$ state [Strauch et al., Phys. Rev. Lett. 91, 167005 (2003)]. Assuming phase or transmon qubits with 300 MHz anharmonicity, we show that by using only low frequency qubit-bias control it is possible to implement the qubit-bus cz gate with 99.9% (99.99%) fidelity in about 17ns17\phantom{\rule{0.16em}{0ex}}\mathrm{ns}17ns (23ns23\phantom{\rule{0.16em}{0ex}}\mathrm{ns}23ns) with a realistic two-parameter pulse profile, plus two auxiliary zzz rotations. The fidelity measure we refer to here is a state-averaged intrinsic process fidelity, which does not include any effects of noise or decoherence. These results apply to a multiqubit device that includes strongly coupled memory resonators. We investigate the performance of the qubit-bus cz gate as a function of qubit anharmonicity, identify the dominant intrinsic error mechanism and derive an associated fidelity estimator, quantify the pulse shape sensitivity and precision requirements, simulate qubit-qubit cz gates that are mediated by the bus resonator, and also attempt a global optimization of system parameters including resonator frequencies and couplings. Our results are relevant for a wide range of superconducting hardware designs that incorporate resonators and suggest that it should be possible to demonstrate a 99.999.9%99.9 cz gate with existing transmon qubits, which would constitute an important step towards the development of an error-corrected superconducting quantum computer.
Achieving fast and high-fidelity qubit operations is crucial for unlocking the potential of quantum computers. In particular, reaching low gate errors in two-qubit gates has been a long-standing challenge in the field of superconducting qubits due to their typically long duration relative to coherence times. To realize fast gates, we use the hybridization between fixed-frequency superconducting qubits with a strongly interacting coupler mode that is tunable in frequency. To reduce population leakage during required adiabatic passages through avoided level crossings, we employ a sensitivity-adaptive closed-loop optimization method to design complex pulse shapes. We compare the performance of Gaussian-square, Fourier-series, and piecewise-constant-slope pulse parametrizations and are able to reach 99.9% controlled- Z -gate fidelity using a 64-ns-long Fourier-series pulse defined by only seven parameters. These high-fidelity values are achieved by analyzing the optimized pulse shapes to identify and systematically mitigate signal-line distortions in the experiment. To improve the convergence speed of the optimization, we implement an adaptive cost function, which continuously maximizes the sensitivity. The demonstrated method can be used for tune-up and recalibration of superconducting quantum processors.
Although single- and two-qubit gates are sufficient for universal quantum computation, single-shot three-qubit gates greatly simplify quantum error correction schemes and algorithms. We design fast, high-fidelity three-qubit entangling gates based on microwave pulses for transmon qubits coupled through a superconducting resonator. We show that when interqubit frequency differences are comparable to single-qubit anharmonicities, errors occur primarily through a single unwanted transition. This feature enables the design of fast three-qubit gates based on simple analytical pulse shapes that are engineered to minimize such errors. We show that a three-qubit ccz gate can be performed in 260 ns with fidelities exceeding 99.3899.38%99.38, or 99.9999.99%99.99 with numerical optimization.
High-fidelity quantum gates are crucial for achieving fault-tolerant quantum computing; however, decoherence significantly reduces gate fidelities during long operation times. Although optimal control techniques can theoretically minimize these operation times, they often neglect realistic uncertainties in system parameters. In this work, we demonstrate that by using robust optimal control strategies, the cross-resonance gate in superconducting systems can be operated within 64 ns, achieving fidelities of [Formula: see text] while maintaining robustness against up to 10% uncertainty in a single parameter. Alternatively, by extending the control time to 71 ns, we achieve fidelities of [Formula: see text] with robustness against up to 3% uncertainty. Our results identify the minimal control times attainable with experimentally feasible pulses and system parameters, as well as the maximum allowable static parameter error for high-fidelity operations. Furthermore, we demonstrate simultaneous robustness against both static and time-dependent errors by generating 100 ns control pulses ([Formula: see text]) that maintain robustness against 10% static parameter error and time-dependent parameter fluctuations two orders of magnitude stronger than typical experimental noise. These findings demonstrate a viable open-loop strategy for implementing fast, high-fidelity quantum gates in the presence of realistic system uncertainties that would otherwise degrade conventional control pulses.
The effective use of current Noisy Intermediate-Scale Quantum (NISQ) devices is often limited by the noise which is caused by interaction with the environment and affects the fidelity of quantum gates. In transmon qubit systems, the quantum gate fidelity can be improved by applying control pulses that can minimize the effects of the environmental noise. In this work, we employ physics-guided quantum optimal control strategies to design optimal pulses driving quantum gates on superconducting qubit systems. We test our results by conducting experiments on the IBM quantum hardware using their OpenPulse API. We compare the performance of our pulse-optimized quantum gates against the default quantum gates and show that the optimized pulses improve the fidelity of the quantum gates, in particular the single-qubit gates. We discuss the challenges we encountered in our work and point to possible future improvements.
Applications for noisy intermediate-scale quantum computing devices rely on the efficient entanglement of many qubits to reach a potential quantum advantage. Although entanglement is typically generated using two-qubit gates, direct control of strong multiqubit interactions can improve the efficiency of the process. Here, we investigate a system of three superconducting transmon-type qubits coupled via a single flux-tunable coupler. Tuning the frequency of the coupler by adiabatic flux pulses enables us to control the conditional energy shifts between the qubits and directly realize multiqubit interactions. To accurately adjust the resulting controlled relative phases, we describe a gate protocol involving refocusing pulses and adjustable interaction times. This enables the implementation of the full family of pairwise controlled-phase and controlled-controlled-phase gates. Numerical simulations result in fidelities around 99% and gate times below 300 ns using currently achievable system parameters and decoherence rates.