Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1305.1700 · Physical Review Letters

Multiaxis Inertial Sensing with Long-Time Point Source Atom Interferometry

Susannah M. Dickerson, Jason M. Hogan, Alex Sugarbaker, David M. S. Johnson, Mark A. Kasevich

Published Aug 19, 2013• 428 citations
arXivHTMLPDF

Abstract

We show that light-pulse atom interferometry with atomic point sources and spatially resolved detection enables multiaxis (two rotation, one acceleration) precision inertial sensing at long interrogation times. Using this method, we demonstrate a light-pulse atom interferometer for $^{87}\mathrm{Rb}$ with 1.4 cm peak wave packet separation and a duration of $2T=2.3\text{ }\text{ }\mathrm{s}$. The inferred acceleration sensitivity of each shot is $6.7\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}12}g$, which improves on previous limits by more than 2 orders of magnitude. We also measure Earth's rotation rate with a precision of $200\text{ }\text{ }\mathrm{nrad}/\mathrm{s}$.

DOI
10.1103/physrevlett.111.083001

Related papers

Robust inertial sensing with point-source atom interferometry for interferograms spanning a partial period

Yun-Jhih Chen, Azure Hansen, Moshe Shuker +3 more

Point source atom interferometry (PSI) uses the velocity distribution in a cold atom cloud to simultaneously measure one axis of acceleration and two axes of rotation from the spatial distribution of interferometer phase in an expanded cloud of atoms. Previously, the interferometer phase has been found from the phase, orientation, and period of the resulting spatial atomic interference fringe images. For practical applications in inertial sensing and precision measurement, it is important to be able to measure a wide range of system rotation rates, corresponding to interferograms with far less than one full interference fringe to very many fringes. Interferogram analysis techniques based on image processing used previously for PSI are challenging to implement for low rotation rates that generate less than one full interference fringe across the cloud. We introduce a new experimental method that is closely related to optical phase-shifting interferometry that is effective in extracting rotation values from signals consisting of fractional fringes as well as many fringes without prior knowledge of the rotation rate. The method finds the interferometer phase for each pixel in the image from four interferograms, each with a controlled Raman laser phase shift, to reconstruct the underlying atomic interferometer phase map without image processing.

arXiv:2005.11929•Optics Express•Oct 1, 2020•9 citations

Multidimensional Atom Optics and Interferometry

B. Barrett, P. Cheiney, Baptiste Battelier +2 more

We propose new multidimensional atom optics that can create coherent superpositions of atomic wave packets along three spatial directions. These tools can be used to generate light-pulse atom interferometers that are simultaneously sensitive to the three components of acceleration and rotation, and we discuss how to isolate these inertial components in a single experimental shot. We also present a new type of atomic gyroscope that is insensitive to parasitic accelerations and initial velocities. The ability to measure the full acceleration and rotation vectors with a compact, high-precision, low-bias inertial sensor could strongly impact the fields of inertial navigation, gravity gradiometry, and gyroscopy.

arXiv:1901.02214•Physical Review Letters•Feb 1, 2019•57 citations

Multiaxis atom interferometry with a single-diode laser and a pyramidal magneto-optical trap

Xiaojing Wu, Fei Zi, Jordan Dudley +3 more

Atom interferometry has become one of the most powerful technologies for precision measurements. To develop simple, precise, and versatile atom interferometers for inertial sensing, we demonstrate an atom interferometer measuring acceleration, rotation, and inclination by pointing Raman beams toward individual faces of a pyramidal mirror. Only a single diode laser is used for all functions, including atom trapping, interferometry, and detection. Efficient Doppler-sensitive Raman transitions are achieved without the velocity selecting the atom sample, and with zero differential AC Stark shift between the cesium hyperfine ground states, increasing signal-to-noise and suppressing systematic effects. We measure gravity along two axes (vertical and 45$^\circ$ to the vertical), rotation, and inclination with sensitivities of 6$\,μ$m/s$^2/\sqrt{\rm Hz}$, 300$\,μ$rad/s/$\sqrt{\rm Hz}$, and 4$\,μ$rad/$\sqrt{\rm Hz}$, respectively. This work paves the way toward deployable multiaxis atom interferometers for geodesy, geology, or inertial navigation.

arXiv:1707.08693•Optica•Dec 19, 2017•110 citations

Simultaneous multi-axis inertial sensing with point source interferometry

Yujie Cheng, Azure Hansen, M. Shuker +3 more

In point source atom interferometry (PSI), a cloud of laser-cooled atom expands within a pair of counterpropagatingRaman laser beams and, after a beamsplitter-mirror-beamsplitter Raman pulse sequence, asingle snapshot of the expanded cloud allows simultaneous measurements of one axis of acceleration and two axes of rotation. In PSI, the thermal expansion of the cold-atom cloud, which is undesirable in other atom interferometry methods, is used to establish a position-velocity correlation in the expanded atom cloud. This correlation is employed to map the velocity dependence of the interferometric phaseshift onto a two-dimensional spatial image plane. As a result, the thermal velocity spread of the cloud of laser-cooled atoms facilitates the parallel operation of many atom interferometers, which yields the simultaneous multi-axis sensitivity. PSI provides a new approach to applications of atom interferometers in navigation and space science. For example, the 2D rotation measurement with PSI can be used to find geographic north or to measure the precession of a rotation vector. We have developed a scheme using PSI that is amenable to portable applications and we have demonstrated the measurement of a rotation vector in a plane [1]. We will present our recent results on evaluating the performance and systematic errors in a compact setup and discuss our proposals to address the challenges toward implementing ahigh-precision and portable PSI system.

•Apr 8, 2019•0 citations

Single-Source Multiaxis Cold-Atom Interferometer in a Centimeter-Scale Cell

Yun-Jhih Chen, Azure Hansen, Gregory W. Hoth +4 more

The use of matter-wave interferometry to detect inertial forces is already a powerful tool in precision measurement, but extending it beyond the lab to navigation applications requires optimization for compact setups. Here researchers characterize point-source atom interferometry (PSI) in a centimeter-scale cell, using an expanding cloud of cold atoms and an optical Raman interaction for simultaneous measurement of the system's acceleration along the Raman laser beams plus its rotation vector projected into the plane perpendicular to the beams. The sensitivity measurements presented here inform the further development of quantum inertial sensing that balances size and performance.

Physical Review Applied•Jul 11, 2019•60 citations

Multi-Axis Inertial Sensing with 2D Matter-Wave Arrays

Knut Stolzenberg, Christian Struckmann, Sebastian Bode +8 more

Atom interferometery is an exquisite measurement technique sensitive to inertial forces. However, it is commonly limited to a single sensitive axis, allowing high-precision multidimensional sensing only through subsequent or postcorrected measurements. We report on a novel method for multi-axis inertial sensing based on the correlation of simultaneous light-pulse atom interferometers in 2D array arrangements of Bose-Einstein condensates (BEC). Deploying a scalable 3×3 BEC array spanning 1.6 mm^{2} created using time-averaged optical potentials, we perform measurements of linear acceleration induced by gravity and simultaneously demonstrate sensitivity to angular velocity and acceleration of a rotating reference mirror, as well as gravity gradients and higher-order derivatives. Our Letter enables simple, high-precision multi-axis inertial sensing compatible with high rotation rates, e.g., for inertial navigation in dynamic environments. We finally envision further applications of our method, e.g., 3D in situ measurements and reconstruction of laser beam intensities and wave fronts.

arXiv:2403.08762•Physical Review Letters•Apr 9, 2025•16 citations
We show that light-pulse atom interferometry with atomic point sources and spatially resolved detection enables multiaxis (two rotation, one acceleration) precision inertial sensing at long interrogation times. Using this method, we demonstrate a light-pulse atom interferometer for 87Rb^{87}\mathrm{Rb}87Rb with 1.4 cm peak wave packet separation and a duration of 2T=2.3  s2T=2.3\text{ }\text{ }\mathrm{s}2T=2.3  s. The inferred acceleration sensitivity of each shot is 6.7\ifmmode×\else\texttimes\fi10\ensuremath−12g6.7\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}12}g6.7\ifmmode×\else\texttimes\fi10\ensuremath−12g, which improves on previous limits by more than 2 orders of magnitude. We also measure Earth's rotation rate with a precision of 200  nrad/s200\text{ }\text{ }\mathrm{nrad}/\mathrm{s}200  nrad/s.
Point source atom interferometry (PSI) uses the velocity distribution in a cold atom cloud to simultaneously measure one axis of acceleration and two axes of rotation from the spatial distribution of interferometer phase in an expanded cloud of atoms. Previously, the interferometer phase has been found from the phase, orientation, and period of the resulting spatial atomic interference fringe images. For practical applications in inertial sensing and precision measurement, it is important to be able to measure a wide range of system rotation rates, corresponding to interferograms with far less than one full interference fringe to very many fringes. Interferogram analysis techniques based on image processing used previously for PSI are challenging to implement for low rotation rates that generate less than one full interference fringe across the cloud. We introduce a new experimental method that is closely related to optical phase-shifting interferometry that is effective in extracting rotation values from signals consisting of fractional fringes as well as many fringes without prior knowledge of the rotation rate. The method finds the interferometer phase for each pixel in the image from four interferograms, each with a controlled Raman laser phase shift, to reconstruct the underlying atomic interferometer phase map without image processing.
We propose new multidimensional atom optics that can create coherent superpositions of atomic wave packets along three spatial directions. These tools can be used to generate light-pulse atom interferometers that are simultaneously sensitive to the three components of acceleration and rotation, and we discuss how to isolate these inertial components in a single experimental shot. We also present a new type of atomic gyroscope that is insensitive to parasitic accelerations and initial velocities. The ability to measure the full acceleration and rotation vectors with a compact, high-precision, low-bias inertial sensor could strongly impact the fields of inertial navigation, gravity gradiometry, and gyroscopy.
Atom interferometry has become one of the most powerful technologies for precision measurements. To develop simple, precise, and versatile atom interferometers for inertial sensing, we demonstrate an atom interferometer measuring acceleration, rotation, and inclination by pointing Raman beams toward individual faces of a pyramidal mirror. Only a single diode laser is used for all functions, including atom trapping, interferometry, and detection. Efficient Doppler-sensitive Raman transitions are achieved without the velocity selecting the atom sample, and with zero differential AC Stark shift between the cesium hyperfine ground states, increasing signal-to-noise and suppressing systematic effects. We measure gravity along two axes (vertical and 45∘^\circ∘ to the vertical), rotation, and inclination with sensitivities of 6 μ\,μμm/s2/Hz^2/\sqrt{\rm Hz}2/Hz​, 300 μ\,μμrad/s/Hz\sqrt{\rm Hz}Hz​, and 4 μ\,μμrad/Hz\sqrt{\rm Hz}Hz​, respectively. This work paves the way toward deployable multiaxis atom interferometers for geodesy, geology, or inertial navigation.
In point source atom interferometry (PSI), a cloud of laser-cooled atom expands within a pair of counterpropagatingRaman laser beams and, after a beamsplitter-mirror-beamsplitter Raman pulse sequence, asingle snapshot of the expanded cloud allows simultaneous measurements of one axis of acceleration and two axes of rotation. In PSI, the thermal expansion of the cold-atom cloud, which is undesirable in other atom interferometry methods, is used to establish a position-velocity correlation in the expanded atom cloud. This correlation is employed to map the velocity dependence of the interferometric phaseshift onto a two-dimensional spatial image plane. As a result, the thermal velocity spread of the cloud of laser-cooled atoms facilitates the parallel operation of many atom interferometers, which yields the simultaneous multi-axis sensitivity. PSI provides a new approach to applications of atom interferometers in navigation and space science. For example, the 2D rotation measurement with PSI can be used to find geographic north or to measure the precession of a rotation vector. We have developed a scheme using PSI that is amenable to portable applications and we have demonstrated the measurement of a rotation vector in a plane [1]. We will present our recent results on evaluating the performance and systematic errors in a compact setup and discuss our proposals to address the challenges toward implementing ahigh-precision and portable PSI system.
The use of matter-wave interferometry to detect inertial forces is already a powerful tool in precision measurement, but extending it beyond the lab to navigation applications requires optimization for compact setups. Here researchers characterize point-source atom interferometry (PSI) in a centimeter-scale cell, using an expanding cloud of cold atoms and an optical Raman interaction for simultaneous measurement of the system's acceleration along the Raman laser beams plus its rotation vector projected into the plane perpendicular to the beams. The sensitivity measurements presented here inform the further development of quantum inertial sensing that balances size and performance.
Atom interferometery is an exquisite measurement technique sensitive to inertial forces. However, it is commonly limited to a single sensitive axis, allowing high-precision multidimensional sensing only through subsequent or postcorrected measurements. We report on a novel method for multi-axis inertial sensing based on the correlation of simultaneous light-pulse atom interferometers in 2D array arrangements of Bose-Einstein condensates (BEC). Deploying a scalable 3×3 BEC array spanning 1.6 mm^{2} created using time-averaged optical potentials, we perform measurements of linear acceleration induced by gravity and simultaneously demonstrate sensitivity to angular velocity and acceleration of a rotating reference mirror, as well as gravity gradients and higher-order derivatives. Our Letter enables simple, high-precision multi-axis inertial sensing compatible with high rotation rates, e.g., for inertial navigation in dynamic environments. We finally envision further applications of our method, e.g., 3D in situ measurements and reconstruction of laser beam intensities and wave fronts.