Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1212.1495 · Physical Review Letters

High-Sensitivity Magnetometry Based on Quantum Beats in Diamond Nitrogen-Vacancy Centers

Kejie Fang, Víctor M. Acosta, Charles Santori, Zhihong Huang, Kohei M. Itoh, Hideyuki Watanabe, Shinichi Shikata, Raymond G. Beausoleil

Published Mar 26, 2013• 160 citations
arXivHTMLPDF

Abstract

We demonstrate an absolute magnetometer based on quantum beats in the ground state of nitrogen-vacancy centers in diamond. We show that, by eliminating the dependence of spin evolution on the zero-field splitting D, the magnetometer is immune to temperature fluctuation and strain inhomogeneity. We apply this technique to measure low-frequency magnetic field noise by using a single nitrogen-vacancy center located within 500 nm of the surface of an isotopically pure (99.99% 12C) diamond. The photon-shot-noise limited sensitivity achieves 38 nT/sqrt[Hz] for 4.45 s acquisition time, a factor of sqrt[2] better than the implementation which uses only two spin levels. For long acquisition times (>10 s), we realize up to a factor of 15 improvement in magnetic sensitivity, which demonstrates the robustness of our technique against thermal drifts. Applying our technique to nitrogen-vacancy center ensembles, we eliminate dephasing from longitudinal strain inhomogeneity, resulting in a factor of 2.3 improvement in sensitivity.

DOI
10.1103/physrevlett.110.130802

Related papers

Sensitive ac and dc magnetometry with nitrogen-vacancy-center ensembles in diamond

John F. Barry, Matthew Steinecker, Scott T. Alsid +4 more

Quantum sensing with solid-state spins offers the promise of high spatial resolution, bandwidth, and dynamic range at sensitivities comparable to more mature quantum sensing technologies, such as atomic vapor cells and superconducting devices. However, despite comparable theoretical sensitivity limits, the performance of bulk solid-state quantum sensors has so far lagged behind these more mature alternatives. A recent review [Barry et al., Rev. Mod. Phys. 92, 015004 (2020)] suggests several paths to improve performance of magnetometers employing nitrogen-vacancy defects in diamond, the most-studied solid-state quantum sensing platform. Implementing several suggested techniques, we demonstrate the most sensitive nitrogen-vacancy-based bulk magnetometer reported to date. Our approach combines tailored diamond growth to achieve low strain and long intrinsic dephasing times, the use of double-quantum Ramsey and Hahn-echo magnetometry sequences for broadband and narrowband magnetometry, respectively, and P1 driving to further extend dephasing time. Notably, the device does not include a flux concentrator, preserving the fixed response of the nitrogen vacancies to magnetic field. The magnetometer realizes a minimum sensitivity of $460\phantom{\rule{0.2em}{0ex}}\mathrm{fT}\phantom{\rule{0.2em}{0ex}}{\mathrm{s}}^{1/2}$ in a broadband dc-sensitive mode and $210\phantom{\rule{0.2em}{0ex}}\mathrm{fT}\phantom{\rule{0.2em}{0ex}}{\mathrm{s}}^{1/2}$ in a narrowband ac mode. We describe the experimental setup in detail and highlight potential paths for future improvement.

arXiv:2305.06269•Physical Review Applied•Oct 25, 2024•104 citations

Towards high-sensitivity magnetometry with nitrogen-vacancy centers in diamond using the singlet infrared absorption

Ali Tayefeh Younesi, Muhib Omar, Arne Wickenbrock +2 more

The negatively charged nitrogen vacancy center in diamond is widely used for quantum sensing due to the sensitivity of the spin triplet in the electronic ground state to external perturbations such as strain and electromagnetic fields, which makes it an excellent probe for changes in these perturbations. The spin state can be measured through optically detected magnetic resonance, which is most commonly achieved by detecting the photoluminescence after exciting the spin-triplet transition. Recently, methods have been proposed and demonstrated that use the absorption of the infrared singlet transition at 1042 nm instead. These methods, however, require cryogenic temperatures or external cavities to enhance the absorption signal. Here, we report on our efforts to optimize the magnetometer sensitivity at room temperature and without cavities. We reach a sensitivity of 18 pT / Hz , surpassing previously reported values, and a calculated shot-noise limit of 5 pT / Hz . We also report on a defect that is native to diamond grown by chemical vapor deposition and thus absent in high-pressure high-temperature diamond, the excitation of which impacts the measured singlet absorption signal.

arXiv:2410.20876•Physical Review Applied•May 7, 2025•16 citations

Characterization of low-nitrogen quantum diamond for pulsed magnetometry applications

Jiashen Tang, Connor Roncaioli, Andrew Mark Edmonds +4 more

Ensembles of nitrogen-vacancy (NV) centers in diamond are versatile quantum sensors with broad applications in the physical and life sciences. The concentration of neutral substitutional nitrogen ( [ N s 0 ]) strongly influences NV electronic spin coherence times, sensitivity, and optimal sensing strategies. Diamonds with [ N s 0 ] ∼ 1–10 ppm are a focus of recent material engineering efforts, with higher concentrations being favorable for continuous-wave optically detected magnetic resonance (CW-ODMR) and lower concentrations expected to benefit pulsed magnetometry techniques through extended NV spin coherence times and improved sensing duty cycles. In this work, we synthesize and characterize low- [ N s 0 ] ( ∼ 0.8 ppm), NV-enriched diamond material, engineered through low-strain chemical vapor deposition (CVD) growth on high-quality substrates, 12 C isotopic purification, and controlled electron irradiation and annealing. Our results demonstrate good strain homogeneity in diamonds grown on CVD substrates and spin-bath-limited NV dephasing times. By measuring NV spin and charge properties across a wide range of optical NV excitation intensity, we provide direct comparisons of photon-shot-noise-limited magnetic field sensitivity between the current low- [ N s 0 ] and previously studied higher- [ N s 0 ] ( ∼ 14 ppm) NV-diamond sensors. We show that low- [ N s 0 ] diamond can outperform higher- [ N s 0 ] diamond at moderate and low optical NV excitation intensity. Our results provide practical benchmarks and guidance for selecting NV-diamond sensors tailored to specific experimental constraints and sensing requirements.

arXiv:2509.06884•Frontiers in Quantum Science and Technology•Dec 9, 2025•1 citation

Level anti-crossing magnetometry with color centers in diamond

Huijie Zheng, Georgios Chatzidrosos, Arne Wickenbrock +7 more

Recent developments in magnetic field sensing with negatively charged nitrogen-vacancy centers (NV) in diamond employ magnetic-field (MF) dependent features in the photoluminescence (PL) and eliminate the need for microwaves (MW). Here, we study two approaches towards improving the magnetometric sensitivity using the ground-state level anti-crossing (GSLAC) feature of the NV center at a background MF of 102.4 mT. Following the first approach, we investigate the feature parameters for precise alignment in a dilute diamond sample; the second approach extends the sensing protocol into absorption via detection of the GSLAC in the diamond transmission of a 1042nm laser beam. This leads to an increase of GSLAC contrast and results in a magnetometer with a sensitivity of 0.45 nT/√Hz and a photon shot-noise limited sensitivity of 12.2 pT/√Hz.

arXiv:1701.06838•Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 20, 2017•22 citations

Using NV centers in diamond to detect DC to very-low frequency magnetic fields

Valts Krumins, Ivars Krastins, Oskars Rudzitis +3 more

In this work we present a compact and portable tabletop magnetometer that utilizes negatively charged nitrogen-vacancy (NV) centers in diamond. The magnetometer is operated using a dual microwave resonance detection approach in combination with an optically detected magnetic resonance (ODMR) technique (mitigating drifts in results due to changes of the diamond temperature), capable of simultaneously exciting and registering two ODMR transitions. The experimentally measured magnetic field noise-floor is $\approx 2.3~\textrm{nT}\sqrt{\textrm{Hz}}$ while the calculated shot-noise-limited magnetic field sensitivity is $\approx 585~\textrm{pT}\sqrt{\textrm{Hz}}$ when excited with a continuous wave laser at 0.5~W. These results pave the way for realizing a simple set-up magnetometer for precise single axis magnetic field measurements for example for accurate electric current measurements for stabilization purposes and magnetic communication applications.

quant-pharXiv:2512.24273•Dec 31, 2025

A sensitivity-enhanced sunlight-driven quantum magnetometer via level anti-crossing

Yunbin Zhu, Ke Jing, Xing Rong +2 more

Nitrogen-vacancy (NV) centers in diamond have emerged as a robust room-temperature solid-state platform for weak magnetic field detection. Several NV-based magnetometers have been proposed in the past decades, but they still suffer from either low sensitivity or high power consumption. This is a challenge for sensors deployed in remote locations on Earth or in space that are not connected to the power grid. Although sunlight-driven quantum magnetometry, which does not rely on conventional energy sources, has been proposed as a possible solution, its sensitivity remains a limitation. Here, we present an impressive improvement in the sensitivity of the sunlight-driven NV-diamond quantum magnetometer. A crucial aspect of our approach involves leveraging the ground-state level anti-crossing properties of the NV centers, coupled with magnetic flux concentrators. This integration enables us to achieve a magnetic-field sensitivity of 26 pT/Hz in a laboratory environment and 49 pT/Hz when the magnetometer operates outdoors under sunlight. We also illustrate the promising potential of further improving the sensitivity to the subpicotesla level by using cutting-edge technologies. Furthermore, we reveal the capability of this quantum magnetometer as a receiver of extremely low-frequency magnetic signals and pave the way for communication applications. These advancements represent a significant leap toward attaining high-sensitivity and energy-efficient magnetic field sensing and expanding the range of possible applications for these environmentally sustainable quantum technologies.

Applied Physics Letters•Jul 29, 2024•6 citations
We demonstrate an absolute magnetometer based on quantum beats in the ground state of nitrogen-vacancy centers in diamond. We show that, by eliminating the dependence of spin evolution on the zero-field splitting D, the magnetometer is immune to temperature fluctuation and strain inhomogeneity. We apply this technique to measure low-frequency magnetic field noise by using a single nitrogen-vacancy center located within 500 nm of the surface of an isotopically pure (99.99% 12C) diamond. The photon-shot-noise limited sensitivity achieves 38 nT/sqrt[Hz] for 4.45 s acquisition time, a factor of sqrt[2] better than the implementation which uses only two spin levels. For long acquisition times (>10 s), we realize up to a factor of 15 improvement in magnetic sensitivity, which demonstrates the robustness of our technique against thermal drifts. Applying our technique to nitrogen-vacancy center ensembles, we eliminate dephasing from longitudinal strain inhomogeneity, resulting in a factor of 2.3 improvement in sensitivity.
Quantum sensing with solid-state spins offers the promise of high spatial resolution, bandwidth, and dynamic range at sensitivities comparable to more mature quantum sensing technologies, such as atomic vapor cells and superconducting devices. However, despite comparable theoretical sensitivity limits, the performance of bulk solid-state quantum sensors has so far lagged behind these more mature alternatives. A recent review [Barry et al., Rev. Mod. Phys. 92, 015004 (2020)] suggests several paths to improve performance of magnetometers employing nitrogen-vacancy defects in diamond, the most-studied solid-state quantum sensing platform. Implementing several suggested techniques, we demonstrate the most sensitive nitrogen-vacancy-based bulk magnetometer reported to date. Our approach combines tailored diamond growth to achieve low strain and long intrinsic dephasing times, the use of double-quantum Ramsey and Hahn-echo magnetometry sequences for broadband and narrowband magnetometry, respectively, and P1 driving to further extend dephasing time. Notably, the device does not include a flux concentrator, preserving the fixed response of the nitrogen vacancies to magnetic field. The magnetometer realizes a minimum sensitivity of 460fTs1/2460\phantom{\rule{0.2em}{0ex}}\mathrm{fT}\phantom{\rule{0.2em}{0ex}}{\mathrm{s}}^{1/2}460fTs1/2 in a broadband dc-sensitive mode and 210fTs1/2210\phantom{\rule{0.2em}{0ex}}\mathrm{fT}\phantom{\rule{0.2em}{0ex}}{\mathrm{s}}^{1/2}210fTs1/2 in a narrowband ac mode. We describe the experimental setup in detail and highlight potential paths for future improvement.
The negatively charged nitrogen vacancy center in diamond is widely used for quantum sensing due to the sensitivity of the spin triplet in the electronic ground state to external perturbations such as strain and electromagnetic fields, which makes it an excellent probe for changes in these perturbations. The spin state can be measured through optically detected magnetic resonance, which is most commonly achieved by detecting the photoluminescence after exciting the spin-triplet transition. Recently, methods have been proposed and demonstrated that use the absorption of the infrared singlet transition at 1042 nm instead. These methods, however, require cryogenic temperatures or external cavities to enhance the absorption signal. Here, we report on our efforts to optimize the magnetometer sensitivity at room temperature and without cavities. We reach a sensitivity of 18 pT / Hz , surpassing previously reported values, and a calculated shot-noise limit of 5 pT / Hz . We also report on a defect that is native to diamond grown by chemical vapor deposition and thus absent in high-pressure high-temperature diamond, the excitation of which impacts the measured singlet absorption signal.
Ensembles of nitrogen-vacancy (NV) centers in diamond are versatile quantum sensors with broad applications in the physical and life sciences. The concentration of neutral substitutional nitrogen ( [ N s 0 ]) strongly influences NV electronic spin coherence times, sensitivity, and optimal sensing strategies. Diamonds with [ N s 0 ] ∼ 1–10 ppm are a focus of recent material engineering efforts, with higher concentrations being favorable for continuous-wave optically detected magnetic resonance (CW-ODMR) and lower concentrations expected to benefit pulsed magnetometry techniques through extended NV spin coherence times and improved sensing duty cycles. In this work, we synthesize and characterize low- [ N s 0 ] ( ∼ 0.8 ppm), NV-enriched diamond material, engineered through low-strain chemical vapor deposition (CVD) growth on high-quality substrates, 12 C isotopic purification, and controlled electron irradiation and annealing. Our results demonstrate good strain homogeneity in diamonds grown on CVD substrates and spin-bath-limited NV dephasing times. By measuring NV spin and charge properties across a wide range of optical NV excitation intensity, we provide direct comparisons of photon-shot-noise-limited magnetic field sensitivity between the current low- [ N s 0 ] and previously studied higher- [ N s 0 ] ( ∼ 14 ppm) NV-diamond sensors. We show that low- [ N s 0 ] diamond can outperform higher- [ N s 0 ] diamond at moderate and low optical NV excitation intensity. Our results provide practical benchmarks and guidance for selecting NV-diamond sensors tailored to specific experimental constraints and sensing requirements.
Recent developments in magnetic field sensing with negatively charged nitrogen-vacancy centers (NV) in diamond employ magnetic-field (MF) dependent features in the photoluminescence (PL) and eliminate the need for microwaves (MW). Here, we study two approaches towards improving the magnetometric sensitivity using the ground-state level anti-crossing (GSLAC) feature of the NV center at a background MF of 102.4 mT. Following the first approach, we investigate the feature parameters for precise alignment in a dilute diamond sample; the second approach extends the sensing protocol into absorption via detection of the GSLAC in the diamond transmission of a 1042nm laser beam. This leads to an increase of GSLAC contrast and results in a magnetometer with a sensitivity of 0.45 nT/√Hz and a photon shot-noise limited sensitivity of 12.2 pT/√Hz.
In this work we present a compact and portable tabletop magnetometer that utilizes negatively charged nitrogen-vacancy (NV) centers in diamond. The magnetometer is operated using a dual microwave resonance detection approach in combination with an optically detected magnetic resonance (ODMR) technique (mitigating drifts in results due to changes of the diamond temperature), capable of simultaneously exciting and registering two ODMR transitions. The experimentally measured magnetic field noise-floor is ≈2.3 nTHz\approx 2.3~\textrm{nT}\sqrt{\textrm{Hz}}≈2.3 nTHz​ while the calculated shot-noise-limited magnetic field sensitivity is ≈585 pTHz\approx 585~\textrm{pT}\sqrt{\textrm{Hz}}≈585 pTHz​ when excited with a continuous wave laser at 0.5~W. These results pave the way for realizing a simple set-up magnetometer for precise single axis magnetic field measurements for example for accurate electric current measurements for stabilization purposes and magnetic communication applications.
Nitrogen-vacancy (NV) centers in diamond have emerged as a robust room-temperature solid-state platform for weak magnetic field detection. Several NV-based magnetometers have been proposed in the past decades, but they still suffer from either low sensitivity or high power consumption. This is a challenge for sensors deployed in remote locations on Earth or in space that are not connected to the power grid. Although sunlight-driven quantum magnetometry, which does not rely on conventional energy sources, has been proposed as a possible solution, its sensitivity remains a limitation. Here, we present an impressive improvement in the sensitivity of the sunlight-driven NV-diamond quantum magnetometer. A crucial aspect of our approach involves leveraging the ground-state level anti-crossing properties of the NV centers, coupled with magnetic flux concentrators. This integration enables us to achieve a magnetic-field sensitivity of 26 pT/Hz in a laboratory environment and 49 pT/Hz when the magnetometer operates outdoors under sunlight. We also illustrate the promising potential of further improving the sensitivity to the subpicotesla level by using cutting-edge technologies. Furthermore, we reveal the capability of this quantum magnetometer as a receiver of extremely low-frequency magnetic signals and pave the way for communication applications. These advancements represent a significant leap toward attaining high-sensitivity and energy-efficient magnetic field sensing and expanding the range of possible applications for these environmentally sustainable quantum technologies.