We propose a scheme of quantum information processing with NV-centers embedded inside diamond nanostructure. Single NV-center placed in the cavity plays role of an electron spin qubit which evolution is controlled by microwave pulses. Besides, it couples to the cavity field via optical photon exchange. In their turn, neighbor cavities are coupled to each other through the photon hopping to form a bus waveguide mode. This waveguide mode overlaps with all NVcenters. Entanglement between distant centers is organized by appropriate tuning of their optical frequency relative to the waveguide frequency via electrostatic control without lasers. We describe the controlled-Z operation that is by one order of magnitude faster than in off-resonant laser-assisted schemes proposed earlier. Spectral characteristics of the onedimensional chain of microdisks are calculated by means of numerical modeling, using the approach analogous to the tight-binding approximation in the solid-state physics. The data obtained allow to optimize the geometry of the microdisk array for the effective implementation of quantum operations.
We propose a scheme of quantum information processing with NV-centers embedded inside diamond nanostructure. Single NV-center placed in the cavity plays role of an electron spin qubit which evolution is controlled by microwave pulses. Besides, it couples to the cavity field via optical photon exchange. In their turn, neighbor cavities are coupled to each other through the photon hopping to form a bus waveguide mode. This waveguide mode overlaps with all NVcenters. Entanglement between distant centers is organized by appropriate tuning of their optical frequency relative to the waveguide frequency via electrostatic control without lasers. We describe the controlled-Z operation that is by one order of magnitude faster than in off-resonant laser-assisted schemes proposed earlier. Spectral characteristics of the onedimensional chain of microdisks are calculated by means of numerical modeling, using the approach analogous to the tight-binding approximation in the solid-state physics. The data obtained allow to optimize the geometry of the microdisk array for the effective implementation of quantum operations.
Scalable quantum information processing using nitrogen-vacancy (NV) centers in diamond will be difficult without the ability to couple the centers to optical microcavities and waveguides. Here we present our preliminary result of coupling a single NV center in a nanoparticle to a silica microdisk at cryogenic temperatures. The cavity-coupled NV photoluminescence is coupled out of the cavity through a tapered fiber. Although the current system is limited by the spectral properties of the NV center and the Q of the cavity, efficient particle-cavity and cavity-waveguide coupling should lead to the realization of a "one-dimensional atom" as needed for CQED, enable single-shot electron-spin readout, and increase the probability of success in entanglement schemes based on single-photon detection.
This thesis describes a series of experiments on the control of the optical properties of the nitrogen-vacancy (NV) center in diamond, and on control of the electron and nuclear spin states associated with the NV center. The NV center is a fluorescing atomic defect center in diamond, consisting of a substitutional nitrogen atom adjacent to a vacancy in the diamond carbon lattice. The electron spin of the NV center can be initialized and read out optically, and coherently manipulated with high fidelity even at room temperature. This unique combination of properties has attracted much attention to the NV center in recent years for application in quantum information technologies. The experiments in this work focus on exploiting the intrinsic hybrid nature of the NV center. The NV center forms a hybrid spin register, as its electron spin is always coupled to the nuclear spin of its own nitrogen nucleus, and can furthermore be coupled to additional nuclear carbon-13 spins in the diamond. In addition, the electronic spin state can be mapped onto the state of a photon, in principle allowing long range transmission of quantum information and measurement-based entanglement of distant NV center registers. The long-term goal is to achieve a large scale quantum network where the different constituents each perform the task they are most well suited for: the stable nuclear spins store the quantum information, photons transfer quantum information over long distances, and the fast electron spin interfaces between spin and photon states. For measurement-based entanglement of distant NV centers it is of primary importance to maximize the emission and detection of coherent photons emitted by the NV center. Spontaneous emission can be controlled and enhanced by coupling an emitter to a photonic cavity. Chapters 3, 4, and 5 of this thesis describe experiments aimed at maximizing the coherent photon emission rate of an NV center by coupling the NV center to a photonic crystal cavity. One of the main challenges is to position a single NV center into the nanometer-sized cavity mode. Chapter 3 describes the development of a nanopositioning technique, which allows diamond nanocrystals ~50 nm in size containing single NV centers to be placed at arbitrary locations on a chip, with nanometer precision. By using a sharp etched tungsten tip, individual nanocrystals can be picked up, moved and placed under real-time imaging with an electron microscope. We explicitly demonstrate that the unique optical and spin properties of the NV center are conserved by the nanopositioning process. In chapter 4, we apply the nanopositioning technique to couple single NV centers contained in a diamond nanocrystals to gallium phosphide photonic crystal cavities. These cavities resonate in the visible with high quality factors, and are designed to have the lowest energy mode coincide with the zero-phonon line of the NV center. Efficient coupling is evidenced by a strong enhancement of NV center emission at the cavity wavelength. The high quality factor of a photonic crystal cavity is a result of careful design and fabrication. The introduction of a nanocrystal may therefore be expected to have a detrimental effect on the optical properties of a cavity. In chapter 5 we investigate the effect of a nanocrystal on the optical properties of photonic crystal cavities. Our simulations and measurements show that the effect of a nanocrystal is in fact only minor, a promising result for future work on cavity-QED systems in the solid state and with diamond defect centers in particular. Understanding and mitigating decoherence is a key challenge for quantum science and technology. The main source of decoherence for solid-state spin systems is the uncontrolled spin bath environment. Chapter 6 describes experiments that exploit quantum control of the NV center and recently developed dynamical decoupling techniques to study the properties of the surrounding bath of spins belonging to single substitutional nitrogen atoms. The coherence properties of a single NV center are affected by changes in the state of the bath spins, allowing a single NV center to be used as a probe to detect bath spin resonances and study the quantum dynamics of the spin bath. We use quantum control of the spin bath to extend the dephasing time of the NV center, important for the application of the NV center in DC magnetometry. In chapter 7 we describe the development and implementation of decoherence protected quantum gates for the hybrid spin register formed by the NV center electron spin that is coupled to the nuclear spin of its own nitrogen atom. Electron and nuclear spins evolve and decohere at vastly different rates, making it challenging to use such a hybrid system as a fully functional quantum register. We create a universal set of two-qubit quantum gates by integrating dynamical decoupling techniques into the gate operation. We demonstrate the power of our gate design by implementing for the first time Grover's quantum search algorithm on a solid-state spin register.
The complex environment of solid-state quantum bits is generally believed to pose a difficult challenge for solid state realizations of quantum information science. Close study of single electronic spins associated with the nitrogen-vacancy (NV) center in diamond has shown how a complex environment -- in this case a spin-bath formed by carbon-13 isotopic impurities -- may be understood and even controlled. Specifically, we show that optical and microwave excitation of the NV center can be used to perform robust initialization, manipulation, and measurement of the two-qubit register formed by the electronic spin and its nearest-neighbor carbon-13 nuclear spin. These few-qubit registers may be used as a basis for scalable quantum information systems provided that one can identify a means to connect different registers. For an optically active system such as the NV center, photons provide a natural medium for inter- register communication, and we discuss initial experiments studying the possibility of quantum optical interconnects. Such an optically-connected few-qubit register offers a flexible hardware for both quantum computation and long-distance quantum communication; in particular, it may allow realization of a solid-state quantum repeater.
A quantumnetwork would allow the distribution of a quantum state over many spatially separated quantum nodes which individually possess the ability to generate, process and store quantum information. Connecting these nodes through quantum communication channels would enable sending quantum information over arbitrarily long distances, secret key distribution with guaranteed secure communication and distributed quantum computing. An appealing platform for implementation of quantum networks is the nitrogen-vacancy (NV) center in diamond. An NV center is an optically active defect in diamond created by the substitution of two adjacent carbon atoms in the diamond crystal matrix by a nitrogen atom and a neighboring vacancy. The NV center fits remarkably well in the described quantum network framework. Its electronic spin can be optically initialized, read out in a single shot, coherently manipulated and coupled to the nearby carbon-13 nuclear spins. These properties represent necessary ingredients of a multi-qubit quantum node. The possibility of the entanglement between the state of the NV center spin and a photon establishes a photonic quantum link which can enable the entanglement of the quantum nodes, forming a quantum network. First building blocks of the proposed quantum networks based on NV centers were demonstrated by performing entanglement between two distant NV centers separated by more than a kilometer. However, the current success rate of the entangling protocols is greatly reduced due to the low emission probability of the NV center photons into the resonant zero phonon line (ZPL) and the inefficient photon extraction from the diamond. This is the central problem which prevents promoting our experiments beyond proof-of-principle demonstration towards practical implementation of the proposed quantumnetworks. The goal of this thesis is tackling these issues by coupling NV centers to optical cavities which would greatly increase the rate of generation and collection of the ZPL photons through themechanism of Purcell enhancement. The design and the fabrication of the components constituting a diamond-basedFabry-Perot microcavity, as used in this thesis, are described in Chapter 4. For large enhancement of the NV center resonant emission, a low cavity mode volume is necessary. This is achieved by inserting a micrometers thin diamond slab into the cavity architecture; we present the fabrication details of such samples. Chapter 5 describes the fabrication of an integrated platform for microwave signal delivery to the NV centers within a diamond membrane in the cavity architecture. Microwave striplines and arrays of unique markers are embedded in the mirror onto which the diamond is bonded. We investigate the mirror optical properties post fabrication and find that the fabrication method preserves the mirror optical performance. We describe the diamond bonding method and demonstrate addressing of the NV center spin. In Chapter 6 we probe the properties of the cavity with the embedded diamond membrane through measurements of the cavity finesse. We investigate the cavity finesse dependence on length, mode structure and temperature. We further explore the operation at cryogenic temperatures by probing the effect of cryostation vibration on the cavity linewidth. Finally, in Chapter 7 we discuss ways of improving the existing experimental capabilities, outline the first steps for demonstrating enhancement of the NV center resonant emission and suggest future experiments that can be performed with this system. We conclude that coupling of the NV centers to the cavities developed in this research could lead to an increase of remote entanglement success rates by more than three orders of magnitude.
Research into hybrid quantum systems is of great interest for quantum information processing; however, a key challenge is finding a controlled interface between a superconducting circuit and a lone solid-state qubit. The authors design a coherent quantum interface between a microwave cavity and a single nitrogen-vacancy center in a mechanical resonator made of diamond. Here the coupling between the quantized motion of the diamond beam and the cavity photons is due to dielectric interaction, not the traditional capacitive coupling, and is scalable to large arrays of resonators for e.g. a memory chip.
We propose a structure and elements of the diamond chip fabrication technology, which could be used for an experimental study of spectral and dynamic properties of a quantum register prototype formed by a chain of microresonators (disks and rings) containing NV-centers. Making use of the parameters of NV-systems today exist, we simulate the dissipative population dynamics of two NV-centers located in different parts of the two-qubit register. As follows from our numerical results, high probability of controlled indirect qubit interaction via photon transfer from one center to another can be already achieved at the current diamond photonics technology level. The calculated operating parameters of the resonators and measuring structure (grating) are in good agreement with those that have been used in devices created by leading world science groups. The fabrication technique of lithographic mask is discussed and its roughness is estimated.