Conventionally, secrecy is achieved using cryptographic techniques beyond the physical layer. Recent studies raise the interest of performing encryption within the physical layer by exploiting some unique features of the physical wireless channel. Following this spirit, we present a novel physical layer encryption (PLE) scheme that randomizes the radio signal using a secret key extracted from the wireless channel under the assumption of channel reciprocity. Specifically, we propose to jointly design the encryption function and the secret-key generation method. On one hand, we establish a sufficient and necessary condition for the encryption function to achieve perfect secrecy. Based on that, several candidate encryption functions are proposed and compared. We show that, given the secret key available to the legitimate users, perfect secrecy can be achieved without compromising the capability of the communication channel. On the other hand, we study the practical design of the secret-key generation method based on the channel reciprocity. We show that, by introducing marginal system overhead, the key agreement between the legitimate users can be done with a high success probability. The performance advantages of the proposed PLE method is verified through comparisons against other existing PLE methods.
Conventionally, secrecy is achieved using cryptographic techniques beyond the physical layer. Recent studies raise the interest of performing encryption within the physical layer by exploiting some unique features of the physical wireless channel. Following this spirit, we present a novel physical layer encryption (PLE) scheme that randomizes the radio signal using a secret key extracted from the wireless channel under the assumption of channel reciprocity. Specifically, we propose to jointly design the encryption function and the secret-key generation method. On one hand, we establish a sufficient and necessary condition for the encryption function to achieve perfect secrecy. Based on that, several candidate encryption functions are proposed and compared. We show that, given the secret key available to the legitimate users, perfect secrecy can be achieved without compromising the capability of the communication channel. On the other hand, we study the practical design of the secret-key generation method based on the channel reciprocity. We show that, by introducing marginal system overhead, the key agreement between the legitimate users can be done with a high success probability. The performance advantages of the proposed PLE method is verified through comparisons against other existing PLE methods.
Due to the unavoidable shared nature of the wireless radio spectrum, providing security for wireless communications presents unique challenges. Cryptographic keys have been used as a primary technique for securing wireless networks but are not completely secure. The symmetric keys used for cryptographic purposes are vulnerable to man-in-the-middle and brute force attacks. More recently, PHY-layer based techniques have gained significant attention, where the principle of channel reciprocity and the natural randomness of the measured wireless channel to generate secret keys is leveraged. Although, PHY-layer secret key generation has been investigated and presented in the literature before, there has been a lack of discussion in terms of obtaining symmetric keys on both ends of the link. In this work, we present a novel PHY-layer secret key generation technique that aims for symmetric encryption keys while limiting the information leaked to an eavesdropper to ensure complete secrecy and to prevent potential intelligent attacks. Our algorithm utilizes forward and backward channel state information in a given wireless link and combats the minute differences observed in these pairs by generating channel trend information. We demonstrate our technique using experimental results from a realtime SDR testbed connected to a wireless channel emulator. Our results indicate that the algorithm is successful in generating symmetric keys under various wireless environments without revealing any information pertaining to the key via the open wireless channel. Our secret key extraction rate can reach values in excess of 17.3 Kbps.
Physical layer security (PLS) can be adopted for efficient key generation and sharing in secured wireless systems. The inherent random nature of the wireless channel and the associated channel reciprocity (CR) are the main pillars for realizing PLS techniques. However, for applications that involve air-to-air (A2A) transmission, such as unmanned aerial vehicle (UAV) applications, the channel does not generally have sufficient randomness to enable reliable key generation. Therefore, this work proposes a novel system design to mitigate the channel randomness constraint and enable a high-rate secret key generation process. The proposed system integrates physically unclonable functions (PUFs) and CR to generate and exchange secret keys between two nodes securely. Moreover, an adaptive and controllable artificial fading (AF) level with interleaving is used to mitigate the impact of low randomness variations in the wireless channel. Moreover, we propose a novel bit extraction scheme to reduce the number of overhead bits required to share the intermediate keys. The obtained Monte Carlo simulation results show that the proposed system can operate efficiently even when the channel is nearly flat or time-invariant. Consequently, the time required for generating and sharing a key is significantly shorter than conventional techniques. Furthermore, the results show that a key agreement can be reached at the first trial for moderate and high signal-to-noise ratios (SNRs) substantially faster than other PLS techniques. Adopting the AF into static channels managed to reduce the mismatch ratio between the generated secret sequences and degrade the eavesdropper’s capability to predict the secret keys.
Physical layer encryption is a promising solution to provide transmission security for Internet-of-Things (IoT). To realize physical layer encryption, channel state information (CSI) as a random source to generate secret keys should be exploited. The reciprocity of wireless channel between legitimate communication nodes which is typically assumed for time division duplex (TDD) systems, is of critical importance to ensure the consistency in generated keys at two nodes. However, in practical TDD systems, due to the asynchronous measurement of CSI, the receiver noise and the the difference in hardware, etc., the reciprocity of channel measurements between legitimate parties is hard to be guaranteed, which makes physical layer key generation approach infeasible. To address this issue, we propose a wireless key generation scheme based on deep learning techniques. Firstly, a feature extraction network, which consists of two auto-encoders trained jointly, is developed to extract the common feature from the different yet correlated channel observations at two legitimate nodes, which will be used as the source to generate keys. Then a quantizer with an adaptive guard band width is devised to output a binary secret-key sequence from the feature vector. Numerical results show that the proposed scheme achieves remarkable improvement in terms of key disagreement rate (KDR) and key generation rate (KGR) compared existing counterparts in the literature.
The diverse application scenarios envisioned for sixth generation (6G) are characterized by the deep integration of sensing and ubiquitous connectivity, which imposes unprecedentedly stringent security requirements. However, due to the open nature of wireless channels, mobile communications systems always face severe information security threats such as falsification, spoofing, interception, and repudiation. Cryptography-based symmetric and asymmetric encryption techniques remain mainstream solutions for information protection. Symmetric encryption is efficient and secure for legitimate users but suffers from key-distribution difficulties over open wireless channels, whereas asymmetric encryption resolves this problem but faces increasing risks from quantum computing due to its reliance on structured mathematical hardness assumptions. In response to these limitations, physical layer security (PLS) has gained a great deal of research attention as a powerful security component that leverages the features of varying wireless channels. Existing PLS schemes can be broadly classified into two categories. The first one takes advantage of the legitimate link’s opportunistic channel-quality superiority over or different spatial-domain directions from the attacking link, which still faces many practical implementation difficulties. The second category is termed physical-layer key generation (PLKG). It extracts the unique features of the legitimate link’s channel variation, which is often reciprocal, as the source of secret key generation and therefore can naturally implement secure key distribution tasks. This advantage no doubt injects new vigor to symmetric encryption as a stronger protection approach. Following this trend, we in this paper concentrate on the PLKG techniques. Specifically, we present a comprehensive overview on existing PLKG schemes, discussing diverse secret key generation and reconciliation methods. We further investigate the model-driven and deep-learning-based approaches tailored for the scenario with imperfect channel reciprocity between the sender and receiver. After comprehensively reviewing major existing schemes, we further discuss a recently proposed PLKG design based on codeword reconstruction, which makes use of the strong error-correcting capability of the forward-error-correction (FEC) codes to effectively implement secure and consistent secret key generation between the legitimate sender and receiver. Finally, we share our opinions on the unsolved challenges and potential research directions dedicated to PLKG toward meeting the security requirements of 6G.
The use of wireless networks for communication has grown significantly in recent times, and continues to develop further. The broadcast nature of wireless communications makes them susceptible to a wide variety of security attacks. Unlike traditional solutions, which usually handle security at the application layer, the primary concern of this dissertation is to analyse and develop solutions for secure communication using channel coding techniques at the physical-layer. \nThe topic of physical layer authenticated encryption using high rate key generation through shared randomness is investigated in this work. First, a physical layer secret key generation scheme is discussed exploiting channel reciprocity in wireless systems. In order to address the susceptibility of this family of schemes to active attacks, a novel physical layer authentication encryption protocol is presented along with its extension to multi-node networks in the presence of active adversaries. Unlike previous work in the area of generating secret keys through shared randomness, it is demonstrated that the proposed scheme is semantically secure with respect to chosen plaintext and chosen cipher text attacks. \nSecondly, in order to increase the rate in bits per seconds at which agreed cryptographic keys are been generated, a multi-level quantization algorithm with public feedback is discussed. It is demonstrated that the proposed scheme is superior to direct information distillation approaches and can substantially increase the key generation rates even at low and medium SNRs. Furthermore, the employment of this low-overhead feedback at the information distillation process can largely simplify the information reconciliation process. \nThe proposed secret key generation schemes are tested for randomness such as required for cryptographic keys. The validation test is perfomed with the aid of National Institute of Standards and Technology (NIST) statistical test suite. The P-values obtained in each of the test carried out indicates that the key sequence generated by our algorithm is random.
Due to the broadcast nature of wireless channels, wireless communication is vulnerable to eavesdropping, message modification, and node impersonation. Securing the wireless communication requires the shared secret keys between the communicating entities. Traditional security schemes rely on public key infrastructures and cryptographic algorithms to manage secret keys. Recently, many physical-layer-based methods have been proposed as alternative solutions for key generation in wireless networks. These methods exploit the inherent randomness of the wireless fading channel to generate secret keys while providing information-theoretical security without intensive cryptographic computations. This article provides an overview of the existing PHY-based key generation schemes exploiting the randomness of the wireless channels. Specifically, we first introduce the fundamental and general framework of the PHY-based key generation schemes and then categorize them into two classes: received-signal-strength-based and channel- phase-based protocols. Finally, we present a performance comparison of them in terms of key disagreement probability, key generation rate, key bit randomness, scalability, and implementation issues.