Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1209.2062 · Physical Review B

Tensor networks and the numerical renormalization group

Andreas Weichselbaum

Published Dec 20, 2012• 84 citations
arXivHTMLPDF

Abstract

The full-density-matrix numerical renormalization group has evolved as a systematic and transparent setting for the calculation of thermodynamical quantities at arbitrary temperatures within the numerical renormalization group (NRG) framework. It directly evaluates the relevant Lehmann representations based on the complete basis sets introduced by Anders and Schiller [Phys. Rev. Lett. 95, 196801 (2005)]. In addition, specific attention is given to the possible feedback from low-energy physics to high energies by the explicit and careful construction of the full thermal density matrix, naturally generated over a distribution of energy shells. Specific examples are given in terms of spectral functions (fdmNRG), time-dependent NRG (tdmNRG), Fermi-golden-rule calculations (fgrNRG) as well as the calculation of plain thermodynamic expectation values. Furthermore, based on the very fact that, by its iterative nature, the NRG eigenstates are naturally described in terms of matrix product states, the language of tensor networks has proven enormously convenient in the description of the underlying algorithmic procedures. This paper therefore also provides a detailed introduction and discussion of the prototypical NRG calculations in terms of their corresponding tensor networks.

DOI
10.1103/physrevb.86.245124

Related papers

Full density-matrix numerical renormalization group calculation of impurity susceptibility and specific heat of the Anderson impurity model

L. Merker, Andreas Weichselbaum, Theo A. Costi

Recent developments in the numerical renormalization group (NRG) allow the construction of the full density matrix (FDM) of quantum impurity models [see A. Weichselbaum and J. von Delft, Phys. Rev. Lett. 99, 076402 (2007)] by using the completeness of the eliminated states introduced by F. B. Anders and A. Schiller [F. B. Anders and A. Schiller, Phys. Rev. Lett. 95, 196801 (2005)]. While these developments prove particularly useful in the calculation of transient response and finite-temperature Green's functions of quantum impurity models, they may also be used to calculate thermodynamic properties. In this paper, we assess the FDM approach to thermodynamic properties by applying it to the Anderson impurity model. We compare the results for the susceptibility and specific heat to both the conventional approach within NRG and to exact Bethe ansatz results. We also point out a subtlety in the calculation of the susceptibility (in a uniform field) within the FDM approach. Finally, we show numerically that for the Anderson model, the susceptibilities in response to a local and a uniform magnetic field coincide in the wide-band limit, in accordance with the Clogston-Anderson compensation theorem.

arXiv:1207.2631•Physical Review B•Aug 30, 2012•33 citations

Variational Numerical Renormalization Group: Bridging the Gap between NRG and Density Matrix Renormalization Group

Iztok Pižorn, Frank Verstraete

The numerical renormalization group (NRG) is rephrased as a variational method with the cost function given by the sum of all the energies of the effective low-energy Hamiltonian. This allows us to systematically improve the spectrum obtained by NRG through sweeping. The ensuing algorithm has a lot of similarities to the density matrix renormalization group (DMRG) when targeting many states, and this synergy of NRG and DMRG combines the best of both worlds and extends their applicability. We illustrate this approach with simulations of a quantum spin chain and a single impurity Anderson model where the accuracy of the effective eigenstates is greatly enhanced as compared to the NRG, especially in the transition to the continuum limit.

arXiv:1102.1401•Physical Review Letters•Feb 8, 2012•26 citations

Density-matrix renormalization group: a pedagogical introduction

Gonçalo Catarina, Bruno Murta

Abstract The physical properties of a quantum many-body system can, in principle, be determined by diagonalizing the respective Hamiltonian, but the dimensions of its matrix representation scale exponentially with the number of degrees of freedom. Hence, only small systems that are described through simple models can be tackled via exact diagonalization. To overcome this limitation, numerical methods based on the renormalization group paradigm that restrict the quantum many-body problem to a manageable subspace of the exponentially large full Hilbert space have been put forth. A striking example is the density-matrix renormalization group (DMRG), which has become the reference numerical method to obtain the low-energy properties of one-dimensional quantum systems with short-range interactions. Here, we provide a pedagogical introduction to DMRG, presenting both its original formulation and its modern tensor-network-based version. This colloquium sets itself apart from previous contributions in two ways. First, didactic code implementations are provided to bridge the gap between conceptual and practical understanding. Second, a concise and self-contained introduction to the tensor-network methods employed in the modern version of DMRG is given, thus allowing the reader to effortlessly cross the deep chasm between the two formulations of DMRG without having to explore the broad literature on tensor networks. We expect this pedagogical review to find wide readership among students and researchers who are taking their first steps in numerical simulations via DMRG. Graphic abstract

arXiv:2304.13395•The European Physical Journal B•Aug 1, 2023•36 citations

Build your own tensor network library: DMRjulia I. Basic library for the density matrix renormalization group

Thomas E. Baker, Martin P. Thompson

An introduction to the density matrix renormalization group is contained here, including coding examples. The focus of this code is on basic operations involved in tensor network computations, and this forms the foundation of the DMRjulia library. Algorithmic complexity, measurements from the matrix product state, convergence to the ground state, and other relevant features are also discussed. The present document covers the implementation of operations for dense tensors into the Julia language. The code can be used as an educational tool to understand how tensor network computations are done in the context of entanglement renormalization or as a template for other codes in low level languages. A comprehensive Supplemental Material is meant to be a "Numerical Recipes" style introduction to the core functions and a simple implementation of them. The code is fast enough to be used in research and can be used to make new algorithms.

arXiv:2109.03120•Sep 7, 2021•9 citations

Dynamical spectral function from numerical renormalization group: A full excitation approach

Ke Yang, Ning-Hua Tong

For a given quantum impurity model, Wilson's numerical renormalization group (NRG) naturally defines a NRG Hamiltonian whose exact eigenstates and eigenenergies are obtainable. We give exact expressions for the free energy, static, as well as dynamical quantities of the NRG Hamiltonian. The dynamical spectral function from this approach contains full excitations including intra- and intershell excitations. For the spin-boson model, we compare the spectral function obtained from the present method and the full density matrix (FDM) method, showing that while both guarantee rigorous sum rule, the full excitation approach avoids the causality problem of FDM method.

arXiv:2006.16488•Physical review. B./Physical review. B•Aug 13, 2020•3 citations

Strongly Correlated Models in One Dimension from a Density Matrix Renormalization Group Perspective

Stefan Rommer

The density matrix renormalization group (DMRG) is a numerical method for studying low dimensional strongly correlated models. The study of these models is one of the most active areas of condensed matter physics today and has been spurred not only by the discovery of high temperature superconductivity but also by experiments on new compounds. In this thesis we study fundamentals of the density matrix renormalization group method as well as applications of the method to Heisenberg spin chains. The introductory text is meant as a brief overview of the DMRG as well as Heisenberg spin systems and provides an introduction to the papers. In papers I and II we investigate the density matrix renormalization group with the aim to better understand the underlying structure of the method. We find that if the renormalization converges to a fixed point in the thermodynamic limit, the resulting basis states can be written as a matrix product form. We also show an explicit relation of the DMRG to variational calculations using the fact that the matrix product states can be rederived through a variational ansatz without any reference to the DMRG calculation. It is then shown how the matrix product states can be used to define a set of Bloch waves for describing elementary excitations of the Heisenberg spin-1 chain. The low lying energy spectrum is calculated. In papers III and IV we investigate the thermodynamics of impurities in a spin-1/2 chain. For this purpose we have shown that a recently developed transfer matrix DMRG method can be used to calculate impurity properties. Both impurity corrections to thermodynamic properties and local properties at finite temperature can be obtained. The method gives quicker and more accurate results than quantum Monte Carlo. The numerical results show good agreement with field theory calculations for a number of impurity configurations and the cross-over function for the magnetic susceptibility from high- to low-temperature behavior shows the expected data collapse. Our results also give quantitative predictions for experiments on doped spin-1/2 chains.

•Jan 1, 1998•0 citations
The full-density-matrix numerical renormalization group has evolved as a systematic and transparent setting for the calculation of thermodynamical quantities at arbitrary temperatures within the numerical renormalization group (NRG) framework. It directly evaluates the relevant Lehmann representations based on the complete basis sets introduced by Anders and Schiller [Phys. Rev. Lett. 95, 196801 (2005)]. In addition, specific attention is given to the possible feedback from low-energy physics to high energies by the explicit and careful construction of the full thermal density matrix, naturally generated over a distribution of energy shells. Specific examples are given in terms of spectral functions (fdmNRG), time-dependent NRG (tdmNRG), Fermi-golden-rule calculations (fgrNRG) as well as the calculation of plain thermodynamic expectation values. Furthermore, based on the very fact that, by its iterative nature, the NRG eigenstates are naturally described in terms of matrix product states, the language of tensor networks has proven enormously convenient in the description of the underlying algorithmic procedures. This paper therefore also provides a detailed introduction and discussion of the prototypical NRG calculations in terms of their corresponding tensor networks.
Recent developments in the numerical renormalization group (NRG) allow the construction of the full density matrix (FDM) of quantum impurity models [see A. Weichselbaum and J. von Delft, Phys. Rev. Lett. 99, 076402 (2007)] by using the completeness of the eliminated states introduced by F. B. Anders and A. Schiller [F. B. Anders and A. Schiller, Phys. Rev. Lett. 95, 196801 (2005)]. While these developments prove particularly useful in the calculation of transient response and finite-temperature Green's functions of quantum impurity models, they may also be used to calculate thermodynamic properties. In this paper, we assess the FDM approach to thermodynamic properties by applying it to the Anderson impurity model. We compare the results for the susceptibility and specific heat to both the conventional approach within NRG and to exact Bethe ansatz results. We also point out a subtlety in the calculation of the susceptibility (in a uniform field) within the FDM approach. Finally, we show numerically that for the Anderson model, the susceptibilities in response to a local and a uniform magnetic field coincide in the wide-band limit, in accordance with the Clogston-Anderson compensation theorem.
The numerical renormalization group (NRG) is rephrased as a variational method with the cost function given by the sum of all the energies of the effective low-energy Hamiltonian. This allows us to systematically improve the spectrum obtained by NRG through sweeping. The ensuing algorithm has a lot of similarities to the density matrix renormalization group (DMRG) when targeting many states, and this synergy of NRG and DMRG combines the best of both worlds and extends their applicability. We illustrate this approach with simulations of a quantum spin chain and a single impurity Anderson model where the accuracy of the effective eigenstates is greatly enhanced as compared to the NRG, especially in the transition to the continuum limit.
Abstract The physical properties of a quantum many-body system can, in principle, be determined by diagonalizing the respective Hamiltonian, but the dimensions of its matrix representation scale exponentially with the number of degrees of freedom. Hence, only small systems that are described through simple models can be tackled via exact diagonalization. To overcome this limitation, numerical methods based on the renormalization group paradigm that restrict the quantum many-body problem to a manageable subspace of the exponentially large full Hilbert space have been put forth. A striking example is the density-matrix renormalization group (DMRG), which has become the reference numerical method to obtain the low-energy properties of one-dimensional quantum systems with short-range interactions. Here, we provide a pedagogical introduction to DMRG, presenting both its original formulation and its modern tensor-network-based version. This colloquium sets itself apart from previous contributions in two ways. First, didactic code implementations are provided to bridge the gap between conceptual and practical understanding. Second, a concise and self-contained introduction to the tensor-network methods employed in the modern version of DMRG is given, thus allowing the reader to effortlessly cross the deep chasm between the two formulations of DMRG without having to explore the broad literature on tensor networks. We expect this pedagogical review to find wide readership among students and researchers who are taking their first steps in numerical simulations via DMRG. Graphic abstract
An introduction to the density matrix renormalization group is contained here, including coding examples. The focus of this code is on basic operations involved in tensor network computations, and this forms the foundation of the DMRjulia library. Algorithmic complexity, measurements from the matrix product state, convergence to the ground state, and other relevant features are also discussed. The present document covers the implementation of operations for dense tensors into the Julia language. The code can be used as an educational tool to understand how tensor network computations are done in the context of entanglement renormalization or as a template for other codes in low level languages. A comprehensive Supplemental Material is meant to be a "Numerical Recipes" style introduction to the core functions and a simple implementation of them. The code is fast enough to be used in research and can be used to make new algorithms.
For a given quantum impurity model, Wilson's numerical renormalization group (NRG) naturally defines a NRG Hamiltonian whose exact eigenstates and eigenenergies are obtainable. We give exact expressions for the free energy, static, as well as dynamical quantities of the NRG Hamiltonian. The dynamical spectral function from this approach contains full excitations including intra- and intershell excitations. For the spin-boson model, we compare the spectral function obtained from the present method and the full density matrix (FDM) method, showing that while both guarantee rigorous sum rule, the full excitation approach avoids the causality problem of FDM method.
The density matrix renormalization group (DMRG) is a numerical method for studying low dimensional strongly correlated models. The study of these models is one of the most active areas of condensed matter physics today and has been spurred not only by the discovery of high temperature superconductivity but also by experiments on new compounds. In this thesis we study fundamentals of the density matrix renormalization group method as well as applications of the method to Heisenberg spin chains. The introductory text is meant as a brief overview of the DMRG as well as Heisenberg spin systems and provides an introduction to the papers. In papers I and II we investigate the density matrix renormalization group with the aim to better understand the underlying structure of the method. We find that if the renormalization converges to a fixed point in the thermodynamic limit, the resulting basis states can be written as a matrix product form. We also show an explicit relation of the DMRG to variational calculations using the fact that the matrix product states can be rederived through a variational ansatz without any reference to the DMRG calculation. It is then shown how the matrix product states can be used to define a set of Bloch waves for describing elementary excitations of the Heisenberg spin-1 chain. The low lying energy spectrum is calculated. In papers III and IV we investigate the thermodynamics of impurities in a spin-1/2 chain. For this purpose we have shown that a recently developed transfer matrix DMRG method can be used to calculate impurity properties. Both impurity corrections to thermodynamic properties and local properties at finite temperature can be obtained. The method gives quicker and more accurate results than quantum Monte Carlo. The numerical results show good agreement with field theory calculations for a number of impurity configurations and the cross-over function for the magnetic susceptibility from high- to low-temperature behavior shows the expected data collapse. Our results also give quantitative predictions for experiments on doped spin-1/2 chains.