Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1205.1238 · Physical Review Letters

Sequential Measurement of Conjugate Variables as an Alternative Quantum State Tomography

Antonio Di Lorenzo

Published Jan 3, 2013• 40 citations
arXivHTMLPDF

Abstract

It is shown how it is possible to reconstruct the initial state of a one-dimensional system by sequentially measuring two conjugate variables. The procedure relies on the quasicharacteristic function, the Fourier transform of the Wigner quasiprobability. The proper characteristic function obtained by Fourier transforming the experimentally accessible joint probability of observing "position" then "momentum" (or vice versa) can be expressed as a product of the quasicharacteristic function of the two detectors and that unknown of the quantum system. This allows state reconstruction through the sequence (1) data collection, (2) Fourier transform, (3) algebraic operation, and (4) inverse Fourier transform. The strength of the measurement should be intermediate for the procedure to work.

DOI
10.1103/physrevlett.110.010404

Related papers

Quantum state tomography from a sequential measurement of two variables in a single setup

Antonio Di Lorenzo

We demonstrate that the task of determining an unknown quantum state can be accomplished efficiently by making a sequential measurement of two observables, $\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{A}$ and $\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{B}$, the eigenstates of which form bases connected by a discrete Fourier transform. The state can be pure or mixed, the dimension of the Hilbert space and the coupling strength are arbitrary, and the experimental setup is fixed. The concept of Moyal quasicharacteristic function is introduced for finite-dimensional Hilbert spaces.

arXiv:1303.7154•Physical Review A•Oct 17, 2013•15 citations

Quantum-state tomography using phase-sensitive amplification

Mashhood Ahmad, Shahid Qamar, Muhammad Suhail Zubairy

We propose a model for the quantum-state measurement via phase-sensitive amplification. The basic idea is to amplify the quantum state through a two-photon correlated-emission laser, such that there is no noise in the quadrature of interest and all the noise is fed into the conjugate quadrature. The noise-free quadrature is prepared in different phases and then corresponding quadrature distribution is measured. The Wigner function of the initial quantum state is then reconstructed by carrying out inverse Radon transformation familiar in tomographic imaging. This scheme allows us to avoid the deterioration of homodyne detection measurement due to the problem of detector efficiency.

Physical Review A•Sep 18, 2000•10 citations

Quantum tomography via equidistant states

C. Paiva-Sánchez, Enrique B. Inostroza, O. Jiménez +1 more

We study the possibility of performing quantum state tomography via equidistant states. This class of states allows us to propose a nonsymmetric informationally complete Positive Operator Valued Measure (POVM) based tomographic scheme. The scheme is defined for odd dimensions $N$ and involves the measurement of ${N}^{2}$ transition probabilities and an inversion, which can be analytically carried out by Fourier transform. The scheme can be modified to allow the reconstruction of states in the case of even dimensions at the expense of increasing the number of measurements to $3{N}^{2}/2$.

arXiv:0910.5943•Physical Review A•Sep 20, 2010•29 citations

Characterization of quantum states of light by means of homodyne detection and reconstruction of Wigner functions

Andrés Martínez Silva

In this work, a continuous variable quantum tomography is presented. This is done using two approaches, one using simulated data and another one using data from measurements performed in the laboratory. The Radon inverse transform, under the approximation of filtered back projection, alongside the details on the implementa- tion of balanced homodyne detection needed to perform the tomography are clearly explained. Density matrices in the quadrature and number representation are also obtained from the Wigner function. Additionally, complete documentation of the computational implementation and a user-friendly interface for the tomography is reported

•Jan 1, 2020•0 citations

Single-qubit reaped quantum state tomography

Mahn‐Soo Choi

Quantum state tomography is the experimental procedure of determining an unknown state. It is not only essential for the verification of resources and processors of quantum information but is also important in its own right with regard to the foundation of quantum mechanics. Standard methods have been elusive for large systems because of the enormous number of observables to be measured and the exponential complexity of data post-processing. Here, we propose a new scheme of quantum state tomography that requires the measurement of only three observables (acting jointly on the system and pointer) regardless of the size of the system. The system is coupled to a "pointer" of single qubit, and the wavefunction of the system is "reaped" onto the pointer upon the measurement of the system. Subsequently, standard two-state tomography on the pointer and classical post-processing are used to reconstruct the quantum state of the system. We also developed an efficient and scalable iterative maximum likelihood algorithm to estimate states from statistically incomplete data.

arXiv:2206.09562•Scientific Reports•Jun 29, 2022•4 citations

Quantum Tomography with Phase Space Measurements

Jussi Schultz

This thesis addresses the use of covariant phase space observables in quantum tomography. Necessary and sufficient conditions for the informational completeness of covariant phase space observables are proved, and some state reconstruction formulae are derived. Different measurement schemes for measuring phase space observables are considered. Special emphasis is given to the quantum optical eight-port homodyne detection scheme and, in particular, on the effect of non-unit detector efficiencies on the measured observable. It is shown that the informational completeness of the observable does not depend on the efficiencies. As a related problem, the possibility of reconstructing the position and momentum distributions from the marginal statistics of a phase space observable is considered. It is shown that informational completeness for the phase space observable is neither necessary nor sufficient for this procedure. Two methods for determining the distributions from the marginal statistics are presented. Finally, two alternative methods for determining the state are considered. Some of their shortcomings when compared to the phase space method are discussed.

•Aug 17, 2012•0 citations
It is shown how it is possible to reconstruct the initial state of a one-dimensional system by sequentially measuring two conjugate variables. The procedure relies on the quasicharacteristic function, the Fourier transform of the Wigner quasiprobability. The proper characteristic function obtained by Fourier transforming the experimentally accessible joint probability of observing "position" then "momentum" (or vice versa) can be expressed as a product of the quasicharacteristic function of the two detectors and that unknown of the quantum system. This allows state reconstruction through the sequence (1) data collection, (2) Fourier transform, (3) algebraic operation, and (4) inverse Fourier transform. The strength of the measurement should be intermediate for the procedure to work.
We demonstrate that the task of determining an unknown quantum state can be accomplished efficiently by making a sequential measurement of two observables, $\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{A}$ and $\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{B}$, the eigenstates of which form bases connected by a discrete Fourier transform. The state can be pure or mixed, the dimension of the Hilbert space and the coupling strength are arbitrary, and the experimental setup is fixed. The concept of Moyal quasicharacteristic function is introduced for finite-dimensional Hilbert spaces.
We propose a model for the quantum-state measurement via phase-sensitive amplification. The basic idea is to amplify the quantum state through a two-photon correlated-emission laser, such that there is no noise in the quadrature of interest and all the noise is fed into the conjugate quadrature. The noise-free quadrature is prepared in different phases and then corresponding quadrature distribution is measured. The Wigner function of the initial quantum state is then reconstructed by carrying out inverse Radon transformation familiar in tomographic imaging. This scheme allows us to avoid the deterioration of homodyne detection measurement due to the problem of detector efficiency.
We study the possibility of performing quantum state tomography via equidistant states. This class of states allows us to propose a nonsymmetric informationally complete Positive Operator Valued Measure (POVM) based tomographic scheme. The scheme is defined for odd dimensions NNN and involves the measurement of N2{N}^{2}N2 transition probabilities and an inversion, which can be analytically carried out by Fourier transform. The scheme can be modified to allow the reconstruction of states in the case of even dimensions at the expense of increasing the number of measurements to 3N2/23{N}^{2}/23N2/2.
In this work, a continuous variable quantum tomography is presented. This is done using two approaches, one using simulated data and another one using data from measurements performed in the laboratory. The Radon inverse transform, under the approximation of filtered back projection, alongside the details on the implementa- tion of balanced homodyne detection needed to perform the tomography are clearly explained. Density matrices in the quadrature and number representation are also obtained from the Wigner function. Additionally, complete documentation of the computational implementation and a user-friendly interface for the tomography is reported
Quantum state tomography is the experimental procedure of determining an unknown state. It is not only essential for the verification of resources and processors of quantum information but is also important in its own right with regard to the foundation of quantum mechanics. Standard methods have been elusive for large systems because of the enormous number of observables to be measured and the exponential complexity of data post-processing. Here, we propose a new scheme of quantum state tomography that requires the measurement of only three observables (acting jointly on the system and pointer) regardless of the size of the system. The system is coupled to a "pointer" of single qubit, and the wavefunction of the system is "reaped" onto the pointer upon the measurement of the system. Subsequently, standard two-state tomography on the pointer and classical post-processing are used to reconstruct the quantum state of the system. We also developed an efficient and scalable iterative maximum likelihood algorithm to estimate states from statistically incomplete data.
This thesis addresses the use of covariant phase space observables in quantum tomography. Necessary and sufficient conditions for the informational completeness of covariant phase space observables are proved, and some state reconstruction formulae are derived. Different measurement schemes for measuring phase space observables are considered. Special emphasis is given to the quantum optical eight-port homodyne detection scheme and, in particular, on the effect of non-unit detector efficiencies on the measured observable. It is shown that the informational completeness of the observable does not depend on the efficiencies. As a related problem, the possibility of reconstructing the position and momentum distributions from the marginal statistics of a phase space observable is considered. It is shown that informational completeness for the phase space observable is neither necessary nor sufficient for this procedure. Two methods for determining the distributions from the marginal statistics are presented. Finally, two alternative methods for determining the state are considered. Some of their shortcomings when compared to the phase space method are discussed.