Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1203.4040 · Journal of Communications and Networks

New decoding scheme for LDPC codes based on simple product code structure

Beomkyu Shin, Seokbeom Hong, Hosung Park, Jong‐Seon No, Dong‐Joon Shin

Published Aug 1, 2015• 2 citations
arXivHTMLPDF

Abstract

In this paper, a new decoding scheme is proposed to improve the error correcting performance of low-density parity-check (LDPC) codes in high signal-to-noise ratio (SNR) region by using post-processing. It behaves as follows: First, a conventional LDPC decoding is applied to received LDPC codewords one by one. Then, we count the number of word errors in a predetermined number of decoded codewords. If there is no word error, nothing needs to be done and we can move to the next group of codewords with no delay. Otherwise, we perform a proper post-processing which pro-ducesa new soft-valued codeword (this will befully explained in the main body of this paper) and then apply the conventional LDPC decoding to it again to recover the unsuccessfully decoded codewords. For the proposed decoding scheme, we adopt a simple product code structure which contains LDPC codes and simple algebraic codes as its horizontal and vertical codes, respectively. The decoding capability of the proposed decoding scheme is defined and analyzed using the parity-check matrices of vertical codes and, especially, the combined-decodability is derived for the case of single parity-check (SPC) codes and Hamming codes used as vertical codes. It is also shown that the proposed decoding scheme achieves much better error correcting capability in high SNR region with little additional decoding complexity, compared with the conventional LDPC decoding scheme.

DOI
10.1109/jcn.2015.000066

Related papers

Multi-Stage Decoding Scheme with Post-Processing for LDPC Codes to Lower the Error Floors

Beomkyu Shin, Hosung Park, Jong‐Seon No +1 more

In this letter, we propose a multi-stage decoding scheme with post-processing for low-density parity-check (LDPC) codes, which remedies the rapid performance degradation in the high signal-to-noise ratio (SNR) range known as error floor. In the proposed scheme, the unsuccessfully decoded words of the previous decoding stage are re-decoded by manipulating the received log-likelihood ratios (LLRs) of the properly selected variable nodes. Two effective criteria for selecting the probably erroneous variable nodes are also presented. Numerical results show that the proposed scheme can correct most of the unsuccessfully decoded words of the first stage having oscillatory behavior, which are regarded as a main cause of the error floor.

IEICE Transactions on Communications•Jan 1, 2011•6 citations

An efficient post processing scheme to lower the error floor of LDPC decoders

Wenjie Li, Jun Ting Lin, Zhongfeng Wang

Low-Density Parity-Check (LDPC) codes have extensive applications in numerous communication systems. However, iterative LDPC decoders may suffer from error floor. In this paper, a low complexity post processing scheme (PPS) is proposed to significantly improve the error correction performance of a Min-Sum based LDPC decoder in the error floor region. Instead of using trapping set elimination algorithms, the proposed PPS introduces perturbations so that a decoder can escape from undesired local maximums. After decoding failure, for these unreliable code bits, the proposed PPS generates carefully modified soft messages, which are employed in the following decoding iterations. Numerical results demonstrate that the presented PPS significantly lowers the error floor for simulated LDPC codes.

IEEE International Conference on Communication Technology (ICCT)•Oct 1, 2017•4 citations

Techniques for the decoding of low density parity check codes: efficient simulation, algorithm improvement and implementation

Babak Daneshrad, Enver Çavuş

After the introduction of iterative coding, Low Density Parity Check (LDPC) codes have received a lot of attention due to their remarkable near Shannon-limit performance and practical decoder implementation. However, when employing an LDPC code for various applications, multiple issues do arise at the simulation, algorithm and implementation levels. The first issue is the performance evaluation of the iterative LDPC decoder in the very low Bit Error Rate (BER) regions. So far, no analytical tool has been developed to evaluate the performance of LDPC codes. Unfortunately standard Monte Carlo (MC) simulations cannot be used for performance estimation in these low BER regions due to prohibitive execution times. The second issue is the efficiency of the decoding algorithm. Due to the presence of short cycles in the bipartite graph, sum-product decoding algorithms lead to considerable performance loss for short block-length LDPC codes and produce error floors for longer codes. In addition, the iterative processing and estimation of soft probabilistic values with these algorithms result in very high computational complexity, which in turn impedes the adoption of LDPC codes for power constrained systems. Another prime objective is to design a high throughput decoder architecture which is capable of supporting multiple rates and variable code lengths within minimal area. This work aims to address and provide solutions to the above problems. As a solution to the performance estimation problem of LDPC codes, a highly efficient and novel fast BER simulation technique is developed. At the algorithm level, a performance improvement and error floor avoidance method is introduced, and a computationally efficient algorithm is developed for the sum-product decoding of LDPC codes. And finally, at the architecture level, a high throughput multi-rate variable code length implementation is presented which, when implemented, efficiently minimizes device resources while alleviating the routing complexity of the decoder.

•Jan 1, 2007•2 citations

Design and Implementation of Low Bit Error Rate of LDPC Decoder

Ashlesha P. Kshirsagar, Sandeep Kakde, Manish Devendra Chawhan +1 more

Many classes of high-performance Low-density parity check codes are based on parity check matrices composed of permutation sub matrices. The emulation-simulation framework further allows the algorithm and implementation to be iteratively redefined to improve the error floor performance of message passing decoder. Log-Like hood-Ratio (LLR) based Belief-Propagation (BP) algorithm is presented for Low Density Parity Check codes. Numerically accurate representation of check node update computation used in LLR-BP decoding is described. The implementation of Sum-Product algorithm (SPA) within Low Density Parity Check Code (LDPC) decoder is described in this paper and the correction term is used to improve the decoding performance of min-sum algorithm (MSA). Quantization and log-tanh function approximation in sum-product decoder strongly affect which absorbing set dominates in error floor region. For LDPC decoder, bit error rate (BER) decreases with increase in the signal to noise ratio.

International Conference on Communication Systems and Network Technologies•Apr 1, 2015•1 citation

Lowering Error Floor of Irregular LDPC Codes by CRC and OSD Algorithm

Satoshi Gounai

Irregular Low-Density Parity-Check (LDPC) codes generally achieve better performance than regular LDPC codes at low E b /N 0 values. They have, however, higher error floors than regular LDPC codes. With respect to the construction of the irregular LDPC code, it can achieve the trade-off between the performance degradation of low E b /N 0 region and lowering error floor. It is known that a decoding algorithm can achieve very good performance if it combines the Ordered Statistic Decoding (OSD) algorithm and the Log Likelihood Ratio-Belief Propagation (LLR-BP) decoding algorithm. Unfortunately, all the codewords obtained by the OSD algorithm satisfy the parity check equation of the LDPC code. While we can not use the parity check equation of the LDPC code to stop the decoding process, the wrong codeword that satisfies the parity check equation raises the error floor. Once a codeword that satisfies the parity check equation is generated by the LLR-BP decoding algorithm, we regard that codeword as the final estimate and halt decoding; the OSD algorithm is not performed. In this paper, we propose a new encoding/decoding scheme to lower the error floor created by irregular LDPC codes. The proposed encoding scheme encodes information bits by Cyclic Redundancy Check (CRC) and LDPC code. The proposed decoding scheme, which consists of the LLR-BP decoding, CRC check, and OSD decoding, detects errors in the codewords obtained by the LLR-BP decoding algorithm and the OSD decoding algorithm using the parity check equations of LDPC codes and CRC. Computer simulations show that the proposed encoding/decoding scheme can lower the error floor of irregular LDPC codes.

IEICE Transactions on Communications•Jan 1, 2006•6 citations

Extended layered decoding of LDPC codes

Zhiqiang Cui, Zhongfeng Wang

In this paper, we propose an extended layered decoding approach for low density parity check (LDPC) codes. Compared to conventional layered decoding algorithms, the proposed approach has no constraint in the column weight of each layer. Hence, it enables more flexibility in high-throughput LDPC decoder design with layered decoding. Simulations on structured and random LDPC codes show that the proposed decoding method achieves significantly faster convergence and slightly better error correction performance than the conventional two phase massage passing sum-product algorithm. We also propose an efficient highly parallel decoder architecture for generic quasi-cyclic LDPC codes to facilitate the practical application of the proposed decoding scheme.

ACM Great Lakes Symposium on VLSI (GLSVLSI)•May 4, 2008•5 citations
In this paper, a new decoding scheme is proposed to improve the error correcting performance of low-density parity-check (LDPC) codes in high signal-to-noise ratio (SNR) region by using post-processing. It behaves as follows: First, a conventional LDPC decoding is applied to received LDPC codewords one by one. Then, we count the number of word errors in a predetermined number of decoded codewords. If there is no word error, nothing needs to be done and we can move to the next group of codewords with no delay. Otherwise, we perform a proper post-processing which pro-ducesa new soft-valued codeword (this will befully explained in the main body of this paper) and then apply the conventional LDPC decoding to it again to recover the unsuccessfully decoded codewords. For the proposed decoding scheme, we adopt a simple product code structure which contains LDPC codes and simple algebraic codes as its horizontal and vertical codes, respectively. The decoding capability of the proposed decoding scheme is defined and analyzed using the parity-check matrices of vertical codes and, especially, the combined-decodability is derived for the case of single parity-check (SPC) codes and Hamming codes used as vertical codes. It is also shown that the proposed decoding scheme achieves much better error correcting capability in high SNR region with little additional decoding complexity, compared with the conventional LDPC decoding scheme.
In this letter, we propose a multi-stage decoding scheme with post-processing for low-density parity-check (LDPC) codes, which remedies the rapid performance degradation in the high signal-to-noise ratio (SNR) range known as error floor. In the proposed scheme, the unsuccessfully decoded words of the previous decoding stage are re-decoded by manipulating the received log-likelihood ratios (LLRs) of the properly selected variable nodes. Two effective criteria for selecting the probably erroneous variable nodes are also presented. Numerical results show that the proposed scheme can correct most of the unsuccessfully decoded words of the first stage having oscillatory behavior, which are regarded as a main cause of the error floor.
Low-Density Parity-Check (LDPC) codes have extensive applications in numerous communication systems. However, iterative LDPC decoders may suffer from error floor. In this paper, a low complexity post processing scheme (PPS) is proposed to significantly improve the error correction performance of a Min-Sum based LDPC decoder in the error floor region. Instead of using trapping set elimination algorithms, the proposed PPS introduces perturbations so that a decoder can escape from undesired local maximums. After decoding failure, for these unreliable code bits, the proposed PPS generates carefully modified soft messages, which are employed in the following decoding iterations. Numerical results demonstrate that the presented PPS significantly lowers the error floor for simulated LDPC codes.
After the introduction of iterative coding, Low Density Parity Check (LDPC) codes have received a lot of attention due to their remarkable near Shannon-limit performance and practical decoder implementation. However, when employing an LDPC code for various applications, multiple issues do arise at the simulation, algorithm and implementation levels. The first issue is the performance evaluation of the iterative LDPC decoder in the very low Bit Error Rate (BER) regions. So far, no analytical tool has been developed to evaluate the performance of LDPC codes. Unfortunately standard Monte Carlo (MC) simulations cannot be used for performance estimation in these low BER regions due to prohibitive execution times. The second issue is the efficiency of the decoding algorithm. Due to the presence of short cycles in the bipartite graph, sum-product decoding algorithms lead to considerable performance loss for short block-length LDPC codes and produce error floors for longer codes. In addition, the iterative processing and estimation of soft probabilistic values with these algorithms result in very high computational complexity, which in turn impedes the adoption of LDPC codes for power constrained systems. Another prime objective is to design a high throughput decoder architecture which is capable of supporting multiple rates and variable code lengths within minimal area. This work aims to address and provide solutions to the above problems. As a solution to the performance estimation problem of LDPC codes, a highly efficient and novel fast BER simulation technique is developed. At the algorithm level, a performance improvement and error floor avoidance method is introduced, and a computationally efficient algorithm is developed for the sum-product decoding of LDPC codes. And finally, at the architecture level, a high throughput multi-rate variable code length implementation is presented which, when implemented, efficiently minimizes device resources while alleviating the routing complexity of the decoder.
Many classes of high-performance Low-density parity check codes are based on parity check matrices composed of permutation sub matrices. The emulation-simulation framework further allows the algorithm and implementation to be iteratively redefined to improve the error floor performance of message passing decoder. Log-Like hood-Ratio (LLR) based Belief-Propagation (BP) algorithm is presented for Low Density Parity Check codes. Numerically accurate representation of check node update computation used in LLR-BP decoding is described. The implementation of Sum-Product algorithm (SPA) within Low Density Parity Check Code (LDPC) decoder is described in this paper and the correction term is used to improve the decoding performance of min-sum algorithm (MSA). Quantization and log-tanh function approximation in sum-product decoder strongly affect which absorbing set dominates in error floor region. For LDPC decoder, bit error rate (BER) decreases with increase in the signal to noise ratio.
Irregular Low-Density Parity-Check (LDPC) codes generally achieve better performance than regular LDPC codes at low E b /N 0 values. They have, however, higher error floors than regular LDPC codes. With respect to the construction of the irregular LDPC code, it can achieve the trade-off between the performance degradation of low E b /N 0 region and lowering error floor. It is known that a decoding algorithm can achieve very good performance if it combines the Ordered Statistic Decoding (OSD) algorithm and the Log Likelihood Ratio-Belief Propagation (LLR-BP) decoding algorithm. Unfortunately, all the codewords obtained by the OSD algorithm satisfy the parity check equation of the LDPC code. While we can not use the parity check equation of the LDPC code to stop the decoding process, the wrong codeword that satisfies the parity check equation raises the error floor. Once a codeword that satisfies the parity check equation is generated by the LLR-BP decoding algorithm, we regard that codeword as the final estimate and halt decoding; the OSD algorithm is not performed. In this paper, we propose a new encoding/decoding scheme to lower the error floor created by irregular LDPC codes. The proposed encoding scheme encodes information bits by Cyclic Redundancy Check (CRC) and LDPC code. The proposed decoding scheme, which consists of the LLR-BP decoding, CRC check, and OSD decoding, detects errors in the codewords obtained by the LLR-BP decoding algorithm and the OSD decoding algorithm using the parity check equations of LDPC codes and CRC. Computer simulations show that the proposed encoding/decoding scheme can lower the error floor of irregular LDPC codes.
In this paper, we propose an extended layered decoding approach for low density parity check (LDPC) codes. Compared to conventional layered decoding algorithms, the proposed approach has no constraint in the column weight of each layer. Hence, it enables more flexibility in high-throughput LDPC decoder design with layered decoding. Simulations on structured and random LDPC codes show that the proposed decoding method achieves significantly faster convergence and slightly better error correction performance than the conventional two phase massage passing sum-product algorithm. We also propose an efficient highly parallel decoder architecture for generic quasi-cyclic LDPC codes to facilitate the practical application of the proposed decoding scheme.