We propose a family of surface codes with general lattice structures, where the error tolerances against bit and phase errors can be controlled asymmetrically by changing the underlying lattice geometries. The surface codes on various lattices are found to be efficient in the sense that their threshold values universally approach the quantum Gilbert-Varshamov bound. We find that the error tolerance of the surface codes depends on the connectivity of the underlying lattices; the error chains on a lattice of lower connectivity are easier to correct. On the other hand, the loss tolerance of the surface codes exhibits an opposite behavior; the logical information on a lattice of higher connectivity has more robustness against qubit loss. As a result, we come upon a fundamental trade-off between error and loss tolerances in the family of surface codes with different lattice geometries. We also provide the physical aspects of the present results from the viewpoint of statistical physics, which leads to an equality that captures well both the error and loss tolerances of these surface codes.
We propose a family of surface codes with general lattice structures, where the error tolerances against bit and phase errors can be controlled asymmetrically by changing the underlying lattice geometries. The surface codes on various lattices are found to be efficient in the sense that their threshold values universally approach the quantum Gilbert-Varshamov bound. We find that the error tolerance of the surface codes depends on the connectivity of the underlying lattices; the error chains on a lattice of lower connectivity are easier to correct. On the other hand, the loss tolerance of the surface codes exhibits an opposite behavior; the logical information on a lattice of higher connectivity has more robustness against qubit loss. As a result, we come upon a fundamental trade-off between error and loss tolerances in the family of surface codes with different lattice geometries. We also provide the physical aspects of the present results from the viewpoint of statistical physics, which leads to an equality that captures well both the error and loss tolerances of these surface codes.
A family of surface codes with general lattice structures is proposed. We can control the error tolerances against bit and phase errors asymmetrically by changing the underlying lattice geometries. The surface codes on various lattices are found to be efficient in the sense that their threshold values universally approach the quantum Gilbert-Varshamov bound. We find that the error tolerance of the surface codes depends on the connectivity of the underlying lattices; the error chains on a lattice of lower connectivity are easier to correct. On the other hand, the loss tolerance of the surface codes exhibits an opposite behavior; the logical information on a lattice of higher connectivity has more robustness against qubit loss. As a result, we come upon a fundamental trade-off between error and loss tolerances in the family of surface codes with different lattice geometries.
Quantum computers are far more error-prone than their classical counterparts. Therefore, to build a quantum computer capable of running large-scale quantum algorithms, we must use the techniques of quantum error correction to ensure that the computer produces the correct output even when its components are unreliable. However, the resource requirements of building such a fault-tolerant quantum computer are currently prohibitive. Here, we examine the utility of using three-dimensional (3D) surface codes in a fault-tolerant quantum computer. This family of topological error-correcting codes is a generalization of the well-known 2D surface code to three spatial dimensions. We show that certain 3D surface codes have a transversal logical non-Clifford gate. In a quantum computing architecture, a non-Clifford gate is required to achieve computational universality. Transversal gates do not entangle qubits in different codes, so they are naturally fault tolerant because they do not spread errors. Next, we consider the problem of decoding 3D surface codes. In a quantum error-correcting code, we cannot observe the qubits directly, so we measure parity-check operators to gain information about the state of the code. Decoding is the problem of estimating what error has occurred given a list of unsatisfied parity checks. We observe that 3D surface codes offer asymmetric protection against bit-flip and phase-flip errors, but in both cases, we find that a threshold error rate exists below which we can suppress logical errors by increasing the size of the code. We use our results about logical gates and decoding to propose two fault-tolerant quantum computing architectures that utilize 3D surface codes. Finally, we compare the resource requirements of our architectures with the requirements of leading quantum computing architectures based on topological codes. We find that one of our architectures may be competitive with the leading architectures, depending on the properties of the physical systems used to build the qubits.
Quantum fault tolerance is a prerequisite to harness the full potential of quantum computers. However, achieving fault tolerance remains a major challenge since it requires optimizing tradeoffs between several intertwined theoretical and experimental parameters, including the encoding rate, code distance, parity-check weights, code planarity, and routing. Surface codes remain strong candidates for fault tolerance due to their simple geometric structure, established decoding methods, locality, and experimental attainability. In this work, we present finite families of hyperbolic surface codes that leverage the optimal efficiency scaling kd2/n=C(logk)2 attainable by surface codes with bounded local geometry. We show that optimizing the periodic identifications can double the code distance and thereby increase the code's efficiency by a factor of four, at fixed qubit count, encoding rate, and parity-check weight. We also address the routing problem of hyperbolic surface codes by introducing a topology-aware algorithm that partitions a hyperbolic code into bounded planar modules while reducing long-range communications demand. Circuit-level Monte Carlo simulations yield finite-size threshold estimates for both modular and monolithic layouts, showing that tripling the long-range gate error probability mildly lowers, but does not eliminate, the estimated error-correction thresholds. Together, these results strengthen the case for hyperbolic surface codes as structured and highly efficient large-scale quantum error correction codes for future fault-tolerant architectures.
Abstract Surface codes are quantum error correcting codes typically defined on a 2D array of qubits. A [ d x , d z ] surface code design is being introduced, where d x ( d z ) represents the distance of the code for bit (phase) error correction, motivated by the fact that the severity of bit flip and phase flip errors in the physical quantum system is asymmetric. We present pseudo‐threshold and threshold values for the proposed surface code design for asymmetric error channels in the presence of various degrees of asymmetry of , errors in a depolarisation channel. We demonstrate that compared to symmetric surface codes, our asymmetric surface codes can provide almost double the pseudo‐threshold rates while requiring less than half the number of physical qubits in the presence of increasing asymmetry in the error channel. Our results show that for low degree of asymmetry, it is advantageous to increase d x along with d z . However, as the asymmetry of the channel increases, higher pseudo‐threshold is obtained with increasing d z when d x is kept constant at a low value. Additionally, we also show that the advantage in the pseudo‐threshold rates begins to saturate for any possible degree of asymmetry in the error channel as the surface code asymmetry is continued to be increased.
The surface code is the leading candidate for fault-tolerant quantum computation owing to its planar nearest-neighbor connectivity, high threshold, and efficient decoding, but its low encoding rate demands on the order of a thousand physical qubits per logical qubit in the teraquop regime. Yoked surface codes improve the density by a factor of two or three by concatenating a high-density parity check code on top of the surface code while retaining planar nearest-neighbor connectivity. In this work, we generalize this idea to multiple levels of concatenation and introduce multi-yoked surface codes. Our construction rests on two new ingredients. First, we propose a family of outer codes called chain codes, built by chaining copies of a seed code that detects the block errors of the code one level below; the resulting codes use all logical qubits of the lower level and achieve a high encoding rate within a few concatenation levels. Second, we design a patch allocation in which movable workspaces perform the yoking checks by lattice surgery with a hierarchy of yoking intervals, so that lower-level checks are performed frequently while higher-level checks are performed less often, which avoids the long yoking intervals that a single large-distance outer code would require. As a benchmark, we construct a three-yoked surface code with a [[256,166,8]] outer code and evaluate it numerically under the SI1000 noise model using soft information from the surface code decoder. The logical error rate is suppressed exponentially in the inner code distance, and in the teraquop regime the three-yoked surface code is about 4 to 4.5× denser than the unyoked surface code.
Quantum information theory has shown strong connections with classical statistical physics. For example, quantum error correcting codes like the surface and the color code present a tolerance to qubit loss that is related to the classical percolation threshold of the lattices where the codes are defined. Here we explore such connection to study analytically the tolerance of the color code when the protocol introduced in Vodola et al. [Phys. Rev. Lett. 121, 060501 (2018)] to correct qubit losses is applied. This protocol is based on the removal of the lost qubit from the code, a neighboring qubit, and the lattice edges where these two qubits reside. We first obtain analytically the average fraction of edges r(p) that the protocol erases from the lattice to correct a fraction p of qubit losses. Then, the threshold pc below which the logical information is protected corresponds to the value of p at which r(p) equals the bond-percolation threshold of the lattice. Moreover, we prove that the logical information is protected if and only if the set of lost qubits does not include the entire support of any logical operator. The results presented here open a route to an analytical understanding of the effects of qubit losses in topological quantum error codes.