Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1202.0060 · Physical Review B

Imaging topologically protected transport with quantum degenerate gases

Brian Dellabetta, Taylor L. Hughes, Matthew J. Gilbert, Benjamin Lev

Published May 24, 2012• 14 citations
arXivHTMLPDF

Abstract

Ultracold and quantum degenerate gases held near conductive surfaces can serve as sensitive, high-resolution, and wide-area probes of electronic current flow. Previous work has imaged transport around grain boundaries in a gold wire by using ultracold and Bose-Einstein condensed atoms held microns from the surface with an atom-chip trap. We show that atom-chip microscopy may be applied to useful purpose in the context of materials exhibiting topologically protected surface transport. Current flow through lithographically tailored surface defects in topological insulators (TI), both idealized and with the band structure and conductivity typical of Bi${}_{2}$Se${}_{3}$, is numerically calculated. We propose that imaging current flow patterns enables the differentiation of an ideal TI from one with a finite bulk-to-surface conductivity ratio, and specifically, that the determination of this ratio may be possible by imaging transport around trenches etched into the TI's surface.

DOI
10.1103/physrevb.85.205442

Related papers

Atom chips with two-dimensional electron gases: Theory of near-surface trapping and ultracold-atom microscopy of quantum electronic systems

G. Sinuco-León, B. Kaczmarek, P. Krüger +1 more

We show that current in a two-dimensional electron gas (2DEG) can trap ultracold atoms $<$1 $\ensuremath{\mu}$m away with orders of magnitude less spatial noise than a metal trapping wire. This enables the creation of hybrid systems, which integrate ultracold atoms with quantum electronic devices to give extreme sensitivity and control: For example, activating a single quantized conductance channel in the 2DEG can split a Bose-Einstein condensate (BEC) for atom interferometry. In turn, the BEC offers unique structural and functional imaging of quantum devices and transport in heterostructures and graphene.

arXiv:1007.5339•Physical Review A•Feb 1, 2011•20 citations

Scanning magnetoresistance microscopy of atom chips

Michael Volk, S. Whitlock, C. H. Wolff +2 more

Surface based geometries of microfabricated wires or patterned magnetic films can be used to magnetically trap and manipulate ultracold neutral atoms or Bose-Einstein condensates. We investigate the magnetic properties of such atom chips using a scanning magnetoresistive (MR) microscope with high spatial resolution and high field sensitivity. By comparing MR scans of a permanent magnetic atom chip to field profiles obtained using ultracold atoms, we show that MR sensors are ideally suited to observe small variations of the magnetic field caused by imperfections in the wires or magnetic materials which ultimately lead to fragmentation of ultracold atom clouds. Measurements are also provided for the magnetic field produced by a thin current-carrying wire with small geometric modulations along the edge. Comparisons of our measurements with a full numeric calculation of the current flow in the wire and the subsequent magnetic field show excellent agreement. Our results highlight the use of scanning MR microscopy as a convenient and powerful technique for precisely characterizing the magnetic fields produced near the surface of atom chips.

arXiv:0704.3137•Review of Scientific Instruments•Feb 1, 2008•8 citations

Simulating quantum transport with atoms and light

Philippe Bouyer

The transport of quantum particles in non ideal material media (eg the conduction of electrons in an imperfect crystal) is strongly affected by scattering from impurities of the medium. Even for a weak disorder, semi-classical theories, such as those based on the Boltzmann equation for matter-waves scattering from the impurities, often fail to describe transport properties and full quantum approaches are necessary. The properties of the quantum systems are of fundamental interest as they show intriguing and non-intuitive phenomena that are not yet fully understood such as Anderson localization, percolation, disorder-driven quantum phase transitions and the corresponding Bose-glass or spin-glass phases. Understanding quantum transport in amorphous solids is one of the main issues in this context, related to electric and thermal conductivities. Ultracold atomic gases can now be considered to revisit the problem of quantum conductivity and quantum transport under unique control possibilities. Dilute atomic Bose-Einstein condensates (BEC) and degenerate Fermi gases (DFG) are produced routinely taking advantage of the recent progress in cooling and trapping of neutral atoms. Transport has been widely investigated in controlled potentials with no defects, for instance periodic potentials (optical lattices). Controlled disordered potentials can also be produced with various techniques such as the use of magnetic traps designed on atomic chips with rough wires, the use of localized impurity atoms, the use of radio-frequency fields or the use of optical potentials. This recently lead to the observation of the Anderson Localisation of a BEC and the measurement of the diffusion coefficient of a 2D gaz in the presence of disorder.

•May 12, 2010•0 citations

Cold atoms close to surfaces: measuring magnetic field roughness and disorder potentials

P. Krüger, Stephan Wildermuth, Sebastian Hofferberth +4 more

Microscopic atom optical devices integrated on atom chips allow to precisely control and manipulate ultra-cold ( T < 1 µK) neutral atoms and Bose-Einstein condensates (BECs) close to surfaces. The relevant energy scale of a BEC is extremely small (down to < 10 −11 eV). Consequently, BECs can be utilized as a sensor for variations of the potential energy of the atoms close to the surface. Here we describe how to use trapped atoms as a measurement device and analyze the performance and flexibility of the field sensor. We demonstrate microscopic magnetic imaging with simultaneous high spatial resolution (3 µm) and high field sensitivity (4 nT). With one dimensional BECs, we probe the magnetic field variations close to the surface at distances down to a few microns. Measurements of the magnetic field of a 100 µm wide current carrying wire imply that the magnetic field variations stem from residual variations of the current flow direction, resulting from local properties of the wire. These disorder potentials found near lithographically fabricated wires are two orders of magnitude smaller than those measured close to electroplated conductors.

Journal of Physics Conference Series•Jan 1, 2005•14 citations

Simulating transport with atoms and light

Philippe Bouyer

The transport of quantum particles in non ideal mate- rial media (eg the conduction of electrons in an imperfect crystal) is strongly affected by scattering from impurities of the medium. Even for a weak disorder, semi-classical theories, such as those based on the Boltzmann equation for matter-waves scattering from the impurities, often fail to describe transport properties and full quantum approaches are necessary. The properties of the quan- tum systems are of fundamental interest as they show intriguing and non-intuitive phenomena that are not yet fully understood such as Anderson localization, percola- tion, disorder-driven quantum phase transitions and the corresponding Bose-glass or spin-glass phases. Under- standing quantum transport in amorphous solids is one of the main issues in this context, related to electric and thermal conductivities. Ultracold atomic gases can now be considered to re- visit the problem of quantum conductivity and quan- tum transport under unique control possibilities. Dilute atomic Bose-Einstein condensates (BEC) and degener- ate Fermi gases (DFG) are produced routinely taking advantage of the recent progress in cooling and trap- ping of neutral atoms. Transport has been widely in- vestigated in controlled potentials with no defects, for instance periodic potentials (optical lattices). Controlled disordered potentials can also be produced with various techniques such as the use of magnetic traps designed on atomic chips with rough wires, the use of localized impurity atoms, the use of radio-frequency fields or the use of optical potentials. This recently lead to the ob- servation of the Anderson Localisation of a BEC and the measurement of the diffusion coefficient of a 2D gaz in the presence of disorder.

•Aug 23, 2010•0 citations

Coherent micromanipulation of 1-D BEC in designed potentials

Leonardo Della Pietra

The manipulation of quantum degenerate gases has seen a flourishing of results in the last years. One of the most used tools to create and address a Bose-Einstein condensate (BEC) is the atomchip: A lithographycally patterned surface on which gold conductors are used to generate magnetic fields. To fully realize what the atomchip has to offer the miniaturization of structures and the integration of different devices (resonators, light fields, permanent magnets) are key factors. We have devised a method to micro-engineer the trapping potentials by sculpturing the chip, overcoming some limitations of the lithographic process. Numerical simulations are done on model cases to show the potentials they generate. Experimental data collected on one of these microstructured geometries confirms the expectations and gives indications on the quality of its magnetic potential. We propose also a periodic structure allowing to observe a quantum phase transition between a BEC and a Mott insulator. A further possibility for expanding the capabilities of the atomchip is integrating light fields close to its surface. We generate an optical lattice on our chip and use it to realize an atomic beamsplitter. Coherent splitting of a BEC is observed.

•Jan 1, 2007•1 citation
Ultracold and quantum degenerate gases held near conductive surfaces can serve as sensitive, high-resolution, and wide-area probes of electronic current flow. Previous work has imaged transport around grain boundaries in a gold wire by using ultracold and Bose-Einstein condensed atoms held microns from the surface with an atom-chip trap. We show that atom-chip microscopy may be applied to useful purpose in the context of materials exhibiting topologically protected surface transport. Current flow through lithographically tailored surface defects in topological insulators (TI), both idealized and with the band structure and conductivity typical of Bi2{}_{2}2​Se3{}_{3}3​, is numerically calculated. We propose that imaging current flow patterns enables the differentiation of an ideal TI from one with a finite bulk-to-surface conductivity ratio, and specifically, that the determination of this ratio may be possible by imaging transport around trenches etched into the TI's surface.
We show that current in a two-dimensional electron gas (2DEG) can trap ultracold atoms $<$1 $\ensuremath{\mu}$m away with orders of magnitude less spatial noise than a metal trapping wire. This enables the creation of hybrid systems, which integrate ultracold atoms with quantum electronic devices to give extreme sensitivity and control: For example, activating a single quantized conductance channel in the 2DEG can split a Bose-Einstein condensate (BEC) for atom interferometry. In turn, the BEC offers unique structural and functional imaging of quantum devices and transport in heterostructures and graphene.
Surface based geometries of microfabricated wires or patterned magnetic films can be used to magnetically trap and manipulate ultracold neutral atoms or Bose-Einstein condensates. We investigate the magnetic properties of such atom chips using a scanning magnetoresistive (MR) microscope with high spatial resolution and high field sensitivity. By comparing MR scans of a permanent magnetic atom chip to field profiles obtained using ultracold atoms, we show that MR sensors are ideally suited to observe small variations of the magnetic field caused by imperfections in the wires or magnetic materials which ultimately lead to fragmentation of ultracold atom clouds. Measurements are also provided for the magnetic field produced by a thin current-carrying wire with small geometric modulations along the edge. Comparisons of our measurements with a full numeric calculation of the current flow in the wire and the subsequent magnetic field show excellent agreement. Our results highlight the use of scanning MR microscopy as a convenient and powerful technique for precisely characterizing the magnetic fields produced near the surface of atom chips.
The transport of quantum particles in non ideal material media (eg the conduction of electrons in an imperfect crystal) is strongly affected by scattering from impurities of the medium. Even for a weak disorder, semi-classical theories, such as those based on the Boltzmann equation for matter-waves scattering from the impurities, often fail to describe transport properties and full quantum approaches are necessary. The properties of the quantum systems are of fundamental interest as they show intriguing and non-intuitive phenomena that are not yet fully understood such as Anderson localization, percolation, disorder-driven quantum phase transitions and the corresponding Bose-glass or spin-glass phases. Understanding quantum transport in amorphous solids is one of the main issues in this context, related to electric and thermal conductivities. Ultracold atomic gases can now be considered to revisit the problem of quantum conductivity and quantum transport under unique control possibilities. Dilute atomic Bose-Einstein condensates (BEC) and degenerate Fermi gases (DFG) are produced routinely taking advantage of the recent progress in cooling and trapping of neutral atoms. Transport has been widely investigated in controlled potentials with no defects, for instance periodic potentials (optical lattices). Controlled disordered potentials can also be produced with various techniques such as the use of magnetic traps designed on atomic chips with rough wires, the use of localized impurity atoms, the use of radio-frequency fields or the use of optical potentials. This recently lead to the observation of the Anderson Localisation of a BEC and the measurement of the diffusion coefficient of a 2D gaz in the presence of disorder.
Microscopic atom optical devices integrated on atom chips allow to precisely control and manipulate ultra-cold ( T < 1 µK) neutral atoms and Bose-Einstein condensates (BECs) close to surfaces. The relevant energy scale of a BEC is extremely small (down to < 10 −11 eV). Consequently, BECs can be utilized as a sensor for variations of the potential energy of the atoms close to the surface. Here we describe how to use trapped atoms as a measurement device and analyze the performance and flexibility of the field sensor. We demonstrate microscopic magnetic imaging with simultaneous high spatial resolution (3 µm) and high field sensitivity (4 nT). With one dimensional BECs, we probe the magnetic field variations close to the surface at distances down to a few microns. Measurements of the magnetic field of a 100 µm wide current carrying wire imply that the magnetic field variations stem from residual variations of the current flow direction, resulting from local properties of the wire. These disorder potentials found near lithographically fabricated wires are two orders of magnitude smaller than those measured close to electroplated conductors.
The transport of quantum particles in non ideal mate- rial media (eg the conduction of electrons in an imperfect crystal) is strongly affected by scattering from impurities of the medium. Even for a weak disorder, semi-classical theories, such as those based on the Boltzmann equation for matter-waves scattering from the impurities, often fail to describe transport properties and full quantum approaches are necessary. The properties of the quan- tum systems are of fundamental interest as they show intriguing and non-intuitive phenomena that are not yet fully understood such as Anderson localization, percola- tion, disorder-driven quantum phase transitions and the corresponding Bose-glass or spin-glass phases. Under- standing quantum transport in amorphous solids is one of the main issues in this context, related to electric and thermal conductivities. Ultracold atomic gases can now be considered to re- visit the problem of quantum conductivity and quan- tum transport under unique control possibilities. Dilute atomic Bose-Einstein condensates (BEC) and degener- ate Fermi gases (DFG) are produced routinely taking advantage of the recent progress in cooling and trap- ping of neutral atoms. Transport has been widely in- vestigated in controlled potentials with no defects, for instance periodic potentials (optical lattices). Controlled disordered potentials can also be produced with various techniques such as the use of magnetic traps designed on atomic chips with rough wires, the use of localized impurity atoms, the use of radio-frequency fields or the use of optical potentials. This recently lead to the ob- servation of the Anderson Localisation of a BEC and the measurement of the diffusion coefficient of a 2D gaz in the presence of disorder.
The manipulation of quantum degenerate gases has seen a flourishing of results in the last years. One of the most used tools to create and address a Bose-Einstein condensate (BEC) is the atomchip: A lithographycally patterned surface on which gold conductors are used to generate magnetic fields. To fully realize what the atomchip has to offer the miniaturization of structures and the integration of different devices (resonators, light fields, permanent magnets) are key factors. We have devised a method to micro-engineer the trapping potentials by sculpturing the chip, overcoming some limitations of the lithographic process. Numerical simulations are done on model cases to show the potentials they generate. Experimental data collected on one of these microstructured geometries confirms the expectations and gives indications on the quality of its magnetic potential. We propose also a periodic structure allowing to observe a quantum phase transition between a BEC and a Mott insulator. A further possibility for expanding the capabilities of the atomchip is integrating light fields close to its surface. We generate an optical lattice on our chip and use it to realize an atomic beamsplitter. Coherent splitting of a BEC is observed.