Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1108.2425 · Physical Review B

Monte Carlo study of surface critical phenomena: The special point

Martin Hasenbusch B

Published Oct 7, 2011• 30 citations
arXivHTMLPDF

Abstract

We study the special point in the phase diagram of a semi-infinite system where the bulk transition is in the three-dimensional Ising universality class. To this end we performed a finite-size-scaling study of the improved Blume-Capel model on the simple cubic lattice with two different types of surface interaction. In order to check for the effect of leading bulk corrections we also simulated the spin-1/2 Ising model on the simple cubic lattice. We accurately estimated the surface enhancement coupling at the special point of these models. We find ${y}_{{t}_{1}}=0.718(2)$ and ${y}_{{h}_{1}}=1.6465(6)$ for the surface renormalization group exponents of the special transition. These results are compared with previous ones obtained by using field-theoretic methods and Monte Carlo simulations of the spin-1/2 Ising model. Furthermore, we study the behavior of the surface transition near the special point, and finally we discuss films with special boundary conditions at one surface and fixed ones at the other.

DOI
10.1103/physrevb.84.134405

Related papers

Surface and bulk transitions in three-dimensional O(n) models

Youjin Deng, Henk W. J. Blöte, M. P. Nightingale

Using Monte Carlo methods and finite-size scaling, we investigate surface criticality in the $\mathrm{O}(n)$ models on the simple-cubic lattice with $n=1$, 2, and 3, i.e., the Ising, $XY$, and Heisenberg models. For the critical couplings we find ${K}_{\mathrm{c}}(n=2)=0.454\phantom{\rule{0.2em}{0ex}}1659$ (10) and ${K}_{\mathrm{c}}(n=3)=0.693\phantom{\rule{0.2em}{0ex}}003$ (2). We simulate the three models with open surfaces and determine the surface magnetic exponents at the ordinary transition to be ${y}_{h1}^{(\mathrm{o})}=0.7374\phantom{\rule{0.2em}{0ex}}(15)$, 0.781 (2), and 0.813 (2) for $n=1$, 2, and 3, respectively. Then we vary the surface coupling ${K}_{1}$ and locate the so-called special transition at ${\ensuremath{\kappa}}_{\mathrm{c}}(n=1)=0.502\phantom{\rule{0.2em}{0ex}}14$ (8) and ${\ensuremath{\kappa}}_{\mathrm{c}}(n=2)=0.6222$ (3), where $\ensuremath{\kappa}={K}_{1}∕K\ensuremath{-}1$. The corresponding surface thermal and magnetic exponents are ${y}_{t1}^{(\mathrm{s})}=0.715$ (1) and ${y}_{h1}^{(\mathrm{s})}=1.636$ (1) for the Ising model, and ${y}_{t1}^{(\mathrm{s})}=0.608$ (4) and ${y}_{h1}^{(\mathrm{s})}=1.675$ (1) for the $XY$ model. Finite-size corrections with an exponent close to $\ensuremath{-}1∕2$ occur for both models. Also for the Heisenberg model we find substantial evidence for the existence of a special surface transition.

arXiv:cond-mat/0504173•Physical Review E•Jul 27, 2005•95 citations

Monte Carlo study of surface phase transitions in the three-dimensional Ising model

David Paul Landau, Kurt Binder

We present the results of extensive Monte Carlo simulations of phase transitions and critical behavior at the surface of a simple cubic Ising model. Profiles of the magnetization and internal energy are determined as a function of the distance from the surface, and we extract surface and bulk properties as a function of temperature and surface coupling ${\mathit{J}}_{\mathit{s}}$. The surface-bulk multicritical point is located with improved precision, ${\mathit{J}}_{\mathit{s}}$/J=1.52\ifmmode\pm\else\textpm\fi{}0.02, and crossover behavior is studied. New estimates for critical exponents are extracted, ${\ensuremath{\gamma}}_{1}$=0.78\ifmmode\pm\else\textpm\fi{}0.06, ${\ensuremath{\gamma}}_{1}^{\mathit{m}}$=1.41\ifmmode\pm\else\textpm\fi{}0.14, ${\ensuremath{\gamma}}_{11}^{\mathit{m}}$=0.96\ifmmode\pm\else\textpm\fi{}0.09, and along with critical amplitude ratios these are compared with theoretically predicted values.

Physical review. B, Condensed matter•Mar 1, 1990•143 citations

CRITICAL BEHAVIOR OF THE SEMI-INFINITE MIXED SPINS (7/2, 1/2) MODEL

Hasnae Saadi, El Mostafa Jalal, A. El Antari +3 more

By the use of the Migdal–Kadanoff renormalization group technique and the mean field approximation, we have explored the critical behavior of the semi-infinite mixed spin-7/2 and spin-1/2 Blume–Capel model. As a function of the computation ratios (bulk-surface) R and Y, different phase diagrams in the bulk and on the surface are classified and determined in the (surface anisotropy, temperature) plane. We have found four types of phase diagrams characterized by ordinary, extraordinary, surface, and special phase transitions. The derivative of the free energy and the behavior of the bulk and surface magnetizations are plotted at very low temperatures proving the existence of first-order transitions for both the surface and bulk. We have also presented the related fixed points and the critical exponents manifesting several classes of universality at the surface. Otherwise, a comparison was made between the two methods as well as with previous studies.

Surface Review and Letters•Jun 14, 2023•6 citations

The ordinary surface universality class of the three-dimensional O(N) model

Francesco Parisen Toldin

We study the critical behavior at the ordinary surface universality class of the three-dimensional $\mathrm{O}(N)$ model, bounded by a two-dimensional surface. Using high-precision Monte Carlo simulations of an improved lattice model, where the leading bulk scaling correction is suppressed, and finite-size scaling analysis of the fourth cumulant of the surface magnetization, we obtain precise estimates of the scaling dimension of the surface field operator for $N=2,3,4$. We also determine the fixed-point values of two renormalization-group invariant observables, which characterize the finite-size scaling behavior at the ordinary transition.

arXiv:2303.16683•Physical review. B./Physical review. B•Jul 28, 2023•10 citations

Surface critical behavior in the presence of linear or cubic weak surface fields

Hans Werner Diehl, A. Ciach

The effects of weak symmetry-breaking surface fields on the surface critical behavior of semi-infinite systems with a scalar order parameter are investigated near a bulk critical point. Previous field-theoretic analyses in 4-\ensuremath{\epsilon} dimensions are generalized by incorporating an additional surface term ${\mathit{w}}_{0}$${\mathrm{\ensuremath{\varphi}}}_{\mathit{s}}^{3}$ in the Hamiltonian. The mapping of microscopic models of the lattice-gas type on a continuum field theory is reconsidered, and we conclude that the cubic surface field ${\mathit{w}}_{0}$ generically does not vanish both in the case of an Ising ferromagnet in an applied magnetic field H (where ${\mathit{w}}_{0}$\ensuremath{\sim}H as H\ensuremath{\rightarrow}0) as well as in the case of critical adsorption of fluids onto a wall or an interface. Explicit results of a perturbative renormalization-group analysis are given, which show that a fixed point with nonvanishing cubic surface field ${\mathit{w}}^{\mathrm{*}}$=O(\ensuremath{\surd}\ensuremath{\epsilon} ) exists but that at order \ensuremath{\epsilon} the usual ${\mathit{w}}^{\mathrm{*}}$=0 fixed point is stable in the w direction. The associated correction-to-scaling exponent is ${\mathrm{\ensuremath{\omega}}}_{\mathit{w}}$=\ensuremath{\epsilon}+O(${\mathrm{\ensuremath{\epsilon}}}^{2}$). It is shown that the ${\mathrm{\ensuremath{\varphi}}}_{\mathit{s}}^{3}$ term leads to a mixing of surface enhancement and surface field in the leading odd relevant surface scaling field. Furthermore, it is proven beyond perturbation theory that a (redundant) surface operator exists, that corresponds to a similar mixing in the leading even surface scaling field.The implications of this mixing for the critical behavior near the special surface transition are discussed both for the case of Ising ferromagnets as well as that of fluids. In the case of fluids, the mixing entails that quenched surface disorder of the random bond type is sufficient to prevent the occurrence of a (multicritical) special transition for bulk dimensions d\ensuremath{\le}3 A number of other redundant surface operators are identified, and a general redundancy criterion for surface operators (analogous to Wegner's for bulk operators) is given. Finally, a fixed point with ${\mathit{w}}^{\mathrm{*}}$=iO(\ensuremath{\surd}\ensuremath{\epsilon} ) is obtained, which describes the Yang-Lee edge singularities of an equivalent (d-1)-dimensional bulk system with long-range interactions. The associated critical exponents can be determined to all orders in \ensuremath{\epsilon}.

Physical review. B, Condensed matter•Oct 1, 1991•31 citations

Two- and three-point functions at criticality: Monte Carlo simulations of the improved three-dimensional Blume-Capel model

Martin Hasenbusch B

We compute two- and three-point functions at criticality for the three-dimensional Ising universality class. To this end, we simulate the improved Blume-Capel model at the critical temperature on lattices of a linear size up to $L=1600$. As a check, also simulations of the spin-$\frac{1}{2}$ Ising model are performed. We find ${f}_{\ensuremath{\sigma}\ensuremath{\sigma}\ensuremath{\epsilon}}=1.051(1)$ and ${f}_{\ensuremath{\epsilon}\ensuremath{\epsilon}\ensuremath{\epsilon}}=1.533(5)$ for operator product expansion coefficients. These results are consistent with but less precise than those recently obtained by using the bootstrap method. An important ingredient in our simulations is a variance reduced estimator of $N$-point functions. Finite size corrections vanish with ${L}^{\ensuremath{-}{\mathrm{\ensuremath{\Delta}}}_{\ensuremath{\epsilon}}}$, where $L$ is the linear size of the lattice and ${\mathrm{\ensuremath{\Delta}}}_{\ensuremath{\epsilon}}$ is the scaling dimension of the leading ${Z}_{2}$-even scalar $\ensuremath{\epsilon}$.

arXiv:1711.10946•Physical review. E•Jan 16, 2018•16 citations
We study the special point in the phase diagram of a semi-infinite system where the bulk transition is in the three-dimensional Ising universality class. To this end we performed a finite-size-scaling study of the improved Blume-Capel model on the simple cubic lattice with two different types of surface interaction. In order to check for the effect of leading bulk corrections we also simulated the spin-1/2 Ising model on the simple cubic lattice. We accurately estimated the surface enhancement coupling at the special point of these models. We find yt1=0.718(2){y}_{{t}_{1}}=0.718(2)yt1​​=0.718(2) and yh1=1.6465(6){y}_{{h}_{1}}=1.6465(6)yh1​​=1.6465(6) for the surface renormalization group exponents of the special transition. These results are compared with previous ones obtained by using field-theoretic methods and Monte Carlo simulations of the spin-1/2 Ising model. Furthermore, we study the behavior of the surface transition near the special point, and finally we discuss films with special boundary conditions at one surface and fixed ones at the other.
Using Monte Carlo methods and finite-size scaling, we investigate surface criticality in the O(n)\mathrm{O}(n)O(n) models on the simple-cubic lattice with n=1n=1n=1, 2, and 3, i.e., the Ising, XYXYXY, and Heisenberg models. For the critical couplings we find Kc(n=2)=0.4541659{K}_{\mathrm{c}}(n=2)=0.454\phantom{\rule{0.2em}{0ex}}1659Kc​(n=2)=0.4541659 (10) and Kc(n=3)=0.693003{K}_{\mathrm{c}}(n=3)=0.693\phantom{\rule{0.2em}{0ex}}003Kc​(n=3)=0.693003 (2). We simulate the three models with open surfaces and determine the surface magnetic exponents at the ordinary transition to be yh1(o)=0.7374(15){y}_{h1}^{(\mathrm{o})}=0.7374\phantom{\rule{0.2em}{0ex}}(15)yh1(o)​=0.7374(15), 0.781 (2), and 0.813 (2) for n=1n=1n=1, 2, and 3, respectively. Then we vary the surface coupling K1{K}_{1}K1​ and locate the so-called special transition at ${\ensuremath{\kappa}}_{\mathrm{c}}(n=1)=0.502\phantom{\rule{0.2em}{0ex}}14$ (8) and ${\ensuremath{\kappa}}_{\mathrm{c}}(n=2)=0.6222$ (3), where $\ensuremath{\kappa}={K}_{1}∕K\ensuremath{-}1$. The corresponding surface thermal and magnetic exponents are yt1(s)=0.715{y}_{t1}^{(\mathrm{s})}=0.715yt1(s)​=0.715 (1) and yh1(s)=1.636{y}_{h1}^{(\mathrm{s})}=1.636yh1(s)​=1.636 (1) for the Ising model, and yt1(s)=0.608{y}_{t1}^{(\mathrm{s})}=0.608yt1(s)​=0.608 (4) and yh1(s)=1.675{y}_{h1}^{(\mathrm{s})}=1.675yh1(s)​=1.675 (1) for the XYXYXY model. Finite-size corrections with an exponent close to $\ensuremath{-}1∕2$ occur for both models. Also for the Heisenberg model we find substantial evidence for the existence of a special surface transition.
We present the results of extensive Monte Carlo simulations of phase transitions and critical behavior at the surface of a simple cubic Ising model. Profiles of the magnetization and internal energy are determined as a function of the distance from the surface, and we extract surface and bulk properties as a function of temperature and surface coupling Js{\mathit{J}}_{\mathit{s}}Js​. The surface-bulk multicritical point is located with improved precision, Js{\mathit{J}}_{\mathit{s}}Js​/J=1.52\ifmmode\pm\else\textpm\fi{}0.02, and crossover behavior is studied. New estimates for critical exponents are extracted, ${\ensuremath{\gamma}}_{1}$=0.78\ifmmode\pm\else\textpm\fi{}0.06, ${\ensuremath{\gamma}}_{1}^{\mathit{m}}$=1.41\ifmmode\pm\else\textpm\fi{}0.14, ${\ensuremath{\gamma}}_{11}^{\mathit{m}}$=0.96\ifmmode\pm\else\textpm\fi{}0.09, and along with critical amplitude ratios these are compared with theoretically predicted values.
By the use of the Migdal–Kadanoff renormalization group technique and the mean field approximation, we have explored the critical behavior of the semi-infinite mixed spin-7/2 and spin-1/2 Blume–Capel model. As a function of the computation ratios (bulk-surface) R and Y, different phase diagrams in the bulk and on the surface are classified and determined in the (surface anisotropy, temperature) plane. We have found four types of phase diagrams characterized by ordinary, extraordinary, surface, and special phase transitions. The derivative of the free energy and the behavior of the bulk and surface magnetizations are plotted at very low temperatures proving the existence of first-order transitions for both the surface and bulk. We have also presented the related fixed points and the critical exponents manifesting several classes of universality at the surface. Otherwise, a comparison was made between the two methods as well as with previous studies.
We study the critical behavior at the ordinary surface universality class of the three-dimensional O(N)\mathrm{O}(N)O(N) model, bounded by a two-dimensional surface. Using high-precision Monte Carlo simulations of an improved lattice model, where the leading bulk scaling correction is suppressed, and finite-size scaling analysis of the fourth cumulant of the surface magnetization, we obtain precise estimates of the scaling dimension of the surface field operator for N=2,3,4N=2,3,4N=2,3,4. We also determine the fixed-point values of two renormalization-group invariant observables, which characterize the finite-size scaling behavior at the ordinary transition.
The effects of weak symmetry-breaking surface fields on the surface critical behavior of semi-infinite systems with a scalar order parameter are investigated near a bulk critical point. Previous field-theoretic analyses in 4-\ensuremath{\epsilon} dimensions are generalized by incorporating an additional surface term w0{\mathit{w}}_{0}w0​${\mathrm{\ensuremath{\varphi}}}_{\mathit{s}}^{3}$ in the Hamiltonian. The mapping of microscopic models of the lattice-gas type on a continuum field theory is reconsidered, and we conclude that the cubic surface field w0{\mathit{w}}_{0}w0​ generically does not vanish both in the case of an Ising ferromagnet in an applied magnetic field H (where w0{\mathit{w}}_{0}w0​\ensuremath{\sim}H as H\ensuremath{\rightarrow}0) as well as in the case of critical adsorption of fluids onto a wall or an interface. Explicit results of a perturbative renormalization-group analysis are given, which show that a fixed point with nonvanishing cubic surface field w∗{\mathit{w}}^{\mathrm{*}}w∗=O(\ensuremath{\surd}\ensuremath{\epsilon} ) exists but that at order \ensuremath{\epsilon} the usual w∗{\mathit{w}}^{\mathrm{*}}w∗=0 fixed point is stable in the w direction. The associated correction-to-scaling exponent is ${\mathrm{\ensuremath{\omega}}}_{\mathit{w}}$=\ensuremath{\epsilon}+O(${\mathrm{\ensuremath{\epsilon}}}^{2}$). It is shown that the ${\mathrm{\ensuremath{\varphi}}}_{\mathit{s}}^{3}$ term leads to a mixing of surface enhancement and surface field in the leading odd relevant surface scaling field. Furthermore, it is proven beyond perturbation theory that a (redundant) surface operator exists, that corresponds to a similar mixing in the leading even surface scaling field.The implications of this mixing for the critical behavior near the special surface transition are discussed both for the case of Ising ferromagnets as well as that of fluids. In the case of fluids, the mixing entails that quenched surface disorder of the random bond type is sufficient to prevent the occurrence of a (multicritical) special transition for bulk dimensions d\ensuremath{\le}3 A number of other redundant surface operators are identified, and a general redundancy criterion for surface operators (analogous to Wegner's for bulk operators) is given. Finally, a fixed point with w∗{\mathit{w}}^{\mathrm{*}}w∗=iO(\ensuremath{\surd}\ensuremath{\epsilon} ) is obtained, which describes the Yang-Lee edge singularities of an equivalent (d-1)-dimensional bulk system with long-range interactions. The associated critical exponents can be determined to all orders in \ensuremath{\epsilon}.
We compute two- and three-point functions at criticality for the three-dimensional Ising universality class. To this end, we simulate the improved Blume-Capel model at the critical temperature on lattices of a linear size up to L=1600L=1600L=1600. As a check, also simulations of the spin-12\frac{1}{2}21​ Ising model are performed. We find ${f}_{\ensuremath{\sigma}\ensuremath{\sigma}\ensuremath{\epsilon}}=1.051(1)$ and ${f}_{\ensuremath{\epsilon}\ensuremath{\epsilon}\ensuremath{\epsilon}}=1.533(5)$ for operator product expansion coefficients. These results are consistent with but less precise than those recently obtained by using the bootstrap method. An important ingredient in our simulations is a variance reduced estimator of NNN-point functions. Finite size corrections vanish with ${L}^{\ensuremath{-}{\mathrm{\ensuremath{\Delta}}}_{\ensuremath{\epsilon}}}$, where LLL is the linear size of the lattice and ${\mathrm{\ensuremath{\Delta}}}_{\ensuremath{\epsilon}}$ is the scaling dimension of the leading Z2{Z}_{2}Z2​-even scalar $\ensuremath{\epsilon}$.