Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1108.0491 · Physical Review B

Anisotropic perturbations in three-dimensional O( N )-symmetric vector models

Martin Hasenbusch B, Ettore Vicari

Published Sep 29, 2011• 134 citations
arXivHTMLPDF

Abstract

We investigate the effects of anisotropic perturbations in three-dimensional O($N$)-symmetric vector models. In order to assess their relevance for the critical behavior, we determine the renormalization-group dimensions of the anisotropic perturbations associated with the first few spin values of the representations of the O($N$) group, because the lowest spin values give rise to the most important effects. In particular, we determine them up to spin 4 for $N=2,\phantom{\rule{0.222222em}{0ex}}3,\phantom{\rule{0.222222em}{0ex}}4$, by finite-size analyses of Monte Carlo simulations of lattice O($N$) models, achieving a significant improvement of their accuracy. These results are relevant for several physical systems, such as density-wave systems, magnets with cubic symmetry, and multicritical phenomena arising from the competition of different order parameters.

DOI
10.1103/physrevb.84.125136

Related papers

A Monte Carlo Study of the Criticality of the 3D XY Model

Sindre Vaskinn

In this master thesis the criticality of the 3D XY model with cubic anisotropy has been examined by the means of Monte Carlo simulation. The 3D XY model is a special case of the $O(n)$ spin-vector model which describe numerous phenomena's. Here, $n$ is the number of vector dimensions and for the XY model $n=2$. The $O(n)$-model is invariant for global rotations. This means that it is arbitrary which direction in the symmetry breaking occurs. In real system one should always expect perturbations from a perfect system, here it is done by adding a cubic anisotropy (order $p=4$) then the symmetry of the Hamiltonian is lowered and it will be advantageous for the spins to be ordered in directions $90^o$ apart. This symmetry is called $C_{4}$, which is a part of the cyclic group, and it restricts the symmetry breaking to one of these four directions. \n\nThe criticality of this model is when the spins suddenly align as the temperature is lowered to a critical temperature. Sufficiently close to the critical temperature quantities like the magnetization, which is the sum of spins, will show a power law growth characterised by critical exponents specified by the class of universality of the transition. The critical exponents can be obtained by finite-size scaling. By applying renormalization theory on the critical region one can show that some of parameters in the Hamiltonian are: relevant and effect the scaling, irrelevant and does not effect the scaling and dangerously irrelevant meaning that they only affect some of the critical exponents. Previous Monte Carlo and renormalization calculus show that anisotropy which is relevant for $p<4$ becomes dangerously irrelevant for $p\\geq4$. The question of interest is what kind of effect the dangerously irrelevant parameter in the Hamiltonian has on the scaling. This is interesting because the effect of dangerously irrelevant parameters is hardly studied and anisotropy arise in many crystal systems because of the lattice geometry. \n\nThe results are obtained by Monte Carlo simulations and the critical slowing down close to the phase transition is solved by the method of parallel tempering. This method was chosen because it is simple to implement in a parallel code.\n\nThe Binder cumulant for different quantities and the peak of the magnetic susceptibility was used support a critical temperature $T_c = 2.2019 \\ \\textnormal k$ for no field applied and no anisotropy. The known critical exponents for the no field and no anisotropy was used. The scaling made a good collapse, meaning that the right $T_c$ and the correct critical exponents where used. The scaling did not take into account a magnetic field and therefore a good collapse of curves where not obtained in this case. When the cubic anisotropy was added the critical exponent for the magnetic susceptibility and the cubic order parameter changed, while the other exponents where unchanged. This supports the view that cubic anisotropy is dangerously irrelevant for the 3D XY model. The scaling of the magnetic susceptibility showed a possible new kind of scaling, a scaling which is different on the two sides of the transition. Although a more accurate determination of the critical exponent in the ordered phase require more extensive simulations. It appears that this exponent is larger than the exponent in the disordered phase, where one recovered the isotropic exponent. The difference in the critical exponents has been predicted to increase with $p$ and an investigation of the hexagonal anisotropy $p=6$ has been started.

52•Jan 1, 2015•0 citations

Effects of surface exchange anisotropies on magnetic critical and multicritical behavior at surfaces

Hans Werner Diehl, Erich Eisenriegler

The critical behavior of a semi-infinite $n$-vector model with anisotropic ferromagnetic pair interactions on the surface and isotropic interactions everywhere else is studied with the use of renormalization-group methods for dimension $d=4\ensuremath{-}\ensuremath{\epsilon}$. The effects of surface anisotropies are analyzed near the isotropic ordinary transition (where they produce corrections to scaling), near the isotropic special transition (where they are relevant perturbations), and near a new class of "anisotropic special" transitions. The latter occur if the surface exchange constants associated with ${m}_{e}$ (easy-magnetization) components take a critical value above which ${m}_{e}$-component surface order is possible while the interaction constants of the remaining ${m}_{h}=n\ensuremath{-}{m}_{e}$ (hard-magnetization) components are weaker. Of particular interest is the anisotropic special transition with an easy axis (${m}_{e}=1$) because it occurs also in three dimensions, in contrast to the isotropic special one. The associated critical, crossover, and correction-to-scaling exponents are given to second order in $\ensuremath{\epsilon}$.

Physical review. B, Condensed matter•Jul 1, 1984•41 citations

Critical behavior of O ( 2 ) ⊗ O ( N ) symmetric models

Pasquale Calabrese, Pietro Parruccini, Andrea Pelissetto C +1 more

We investigate the controversial issue of the existence of universality classes describing critical phenomena in three-dimensional systems characterized by a matrix order parameter with symmetry $\mathrm{O}(2)\ensuremath{\bigotimes}\mathrm{O}(N)$ and symmetry-breaking pattern $\mathrm{O}(2)\ensuremath{\bigotimes}\mathrm{O}(N)\ensuremath{\rightarrow}\mathrm{O}(2)\ensuremath{\bigotimes}\mathrm{O}(N\ensuremath{-}2)$. Physical realizations of these systems are, for example, frustrated spin models with noncollinear order. Starting from the field-theoretical Landau-Ginzburg-Wilson Hamiltonian, we consider the massless critical theory and the minimal-subtraction scheme without $ϵ$ expansion. The three-dimensional analysis of the corresponding five-loop series shows the existence of a stable fixed point for $N=2$ and $N=3$, confirming recent field-theoretical results based on a six-loop expansion in the alternative zero-momentum renormalization scheme defined in the massive disordered phase. In addition, we report numerical Monte Carlo simulations of a class of three-dimensional $\mathrm{O}(2)\ensuremath{\bigotimes}\mathrm{O}(2)$-symmetric lattice models. The results provide further support to the existence of the $\mathrm{O}(2)\ensuremath{\bigotimes}\mathrm{O}(2)$ universality class predicted by the field-theoretical analyses.

arXiv:cond-mat/0405667•Physical Review B•Nov 18, 2004•97 citations

Monte Carlo renormalization-group calculations of critical behavior in the simple-cubic Ising model

Godfrey Stuart Pawley, Robert H. Swendsen, D. J. Wallace +1 more

The Monte Carlo renormalization group is applied to the three-dimensional Ising model on simple cubic lattices with ${8}^{3}$, ${16}^{3}$, ${32}^{3}$, and ${64}^{3}$ sites. The comparison of block-spin correlation functions from the largest lattices yields the nearest-neighbor critical coupling ${K}_{1}^{c}=0.221654(6)$. After allowing for (i) interpolation to this best estimate for ${K}_{1}^{c}$, (ii) an apparent finite-size effect in the renormalization-group transformation due to the measurement of correlation functions of too few (seven) operators, and (iii) the extrapolation for the effect of a slow transient towards the fixed point, the values $\ensuremath{\nu}=0.629(4)$ and $\ensuremath{\eta}=0.031(5)$ are obtained for the thermal and magnetic exponents. The correction-to-scaling exponent $\ensuremath{\omega}$ is estimated to be around 1; to obtain an accuracy competitive with other methods requires measurements with more than seven operators. We briefly review the problem of redundant operators and indicate the future prospects for this kind of calculation.

Physical review. B, Condensed matter•Apr 1, 1984•314 citations

ϕ4 lattice model with cubic symmetry in three dimensions: Renormalization group flow and first-order phase transitions

Martin Hasenbusch B

We study the three-component ${\ensuremath{\phi}}^{4}$ model on the simple cubic lattice in the presence of a cubic perturbation. To this end, we perform Monte Carlo simulations in conjunction with a finite-size scaling analysis of the data. The analysis of the renormalization group (RG) flow of a dimensionless quantity provides us with the accurate estimate ${Y}_{4}\ensuremath{-}{\ensuremath{\omega}}_{2}=0.000\phantom{\rule{0.16em}{0ex}}81(7)$ for the difference of the RG eigenvalue ${Y}_{4}$ at the $\text{O}(3)$-symmetric fixed point and the correction exponent ${\ensuremath{\omega}}_{2}$ at the cubic fixed point. We determine an effective exponent ${\ensuremath{\nu}}_{\text{eff}}$ of the correlation length that depends on the strength of the breaking of the $\text{O}(3)$ symmetry. Field theory predicts that depending on the sign of the cubic perturbation, the RG flow is attracted by the cubic fixed point, or runs to an ever increasing amplitude, indicating a fluctuation-induced first-order phase transition. We demonstrate directly the first-order nature of the phase transition for a sufficiently strong breaking of the O(3) symmetry. We obtain accurate results for the latent heat, the correlation length in the disordered phase at the transition temperature, and the interface tension for interfaces between one of the ordered phases and the disordered phase. We study how these quantities scale with the RG flow, allowing quantitative predictions for weaker breaking of the $\text{O}(3)$ symmetry.

arXiv:2307.05165•Physical review. B./Physical review. B•Feb 15, 2024•6 citations

Critical Phenomena and Phase Transitions in Large Lattices within Monte-Carlo Based Non-perturbative Approaches

J. Kaupužs, J. Rimšāns, Roderick Melnik

Critical phenomena and Goldstone mode effects in spin models with the O(n) rotational symmetry are considered. Starting with Goldstone mode singularities in the XY and O(4) models, we briefly review various theoretical concepts, as well as state-of-the-art Monte Carlo simulation results. They support recent results of the GFD (grouping of Feynman diagrams) theory, stating that these singularities are described by certain nontrivial exponents, which differ from those predicted earlier by perturbative treatments. Furthermore, we present the recent Monte Carlo simulation results of the three-dimensional Ising model for lattices with linear sizes up to L = 1536, which are very large as compared to L ≤ 128 usually used in the finite-size scaling analysis. These results are obtained, using a parallel OpenMP implementation of the Wolff single-cluster algorithm. The finite-size scaling analysis of the critical exponent η, assuming the usually accepted correction-to-scaling exponent ω ≈ 0.8, shows that η is likely to be somewhat larger than the value 0.0335 ± 0.0025 of the perturbative renormalization group (RG) theory. Moreover, we have found that the actual data can be well described by different critical exponents: η = ω =1/8 and ν = 2/3, found within the GFD theory.

arXiv:1103.0469•Ukrainian Journal of Physics•Feb 9, 2022•15 citations
We investigate the effects of anisotropic perturbations in three-dimensional O(NNN)-symmetric vector models. In order to assess their relevance for the critical behavior, we determine the renormalization-group dimensions of the anisotropic perturbations associated with the first few spin values of the representations of the O(NNN) group, because the lowest spin values give rise to the most important effects. In particular, we determine them up to spin 4 for N=2,3,4N=2,\phantom{\rule{0.222222em}{0ex}}3,\phantom{\rule{0.222222em}{0ex}}4N=2,3,4, by finite-size analyses of Monte Carlo simulations of lattice O(NNN) models, achieving a significant improvement of their accuracy. These results are relevant for several physical systems, such as density-wave systems, magnets with cubic symmetry, and multicritical phenomena arising from the competition of different order parameters.
In this master thesis the criticality of the 3D XY model with cubic anisotropy has been examined by the means of Monte Carlo simulation. The 3D XY model is a special case of the O(n)O(n)O(n) spin-vector model which describe numerous phenomena's. Here, nnn is the number of vector dimensions and for the XY model n=2n=2n=2. The O(n)O(n)O(n)-model is invariant for global rotations. This means that it is arbitrary which direction in the symmetry breaking occurs. In real system one should always expect perturbations from a perfect system, here it is done by adding a cubic anisotropy (order p=4p=4p=4) then the symmetry of the Hamiltonian is lowered and it will be advantageous for the spins to be ordered in directions 90o90^o90o apart. This symmetry is called C4C_{4}C4​, which is a part of the cyclic group, and it restricts the symmetry breaking to one of these four directions. \n\nThe criticality of this model is when the spins suddenly align as the temperature is lowered to a critical temperature. Sufficiently close to the critical temperature quantities like the magnetization, which is the sum of spins, will show a power law growth characterised by critical exponents specified by the class of universality of the transition. The critical exponents can be obtained by finite-size scaling. By applying renormalization theory on the critical region one can show that some of parameters in the Hamiltonian are: relevant and effect the scaling, irrelevant and does not effect the scaling and dangerously irrelevant meaning that they only affect some of the critical exponents. Previous Monte Carlo and renormalization calculus show that anisotropy which is relevant for p<4p<4p<4 becomes dangerously irrelevant for pgeq4p\\geq4pgeq4. The question of interest is what kind of effect the dangerously irrelevant parameter in the Hamiltonian has on the scaling. This is interesting because the effect of dangerously irrelevant parameters is hardly studied and anisotropy arise in many crystal systems because of the lattice geometry. \n\nThe results are obtained by Monte Carlo simulations and the critical slowing down close to the phase transition is solved by the method of parallel tempering. This method was chosen because it is simple to implement in a parallel code.\n\nThe Binder cumulant for different quantities and the peak of the magnetic susceptibility was used support a critical temperature Tc=2.2019textnormalkT_c = 2.2019 \\ \\textnormal kTc​=2.2019textnormalk for no field applied and no anisotropy. The known critical exponents for the no field and no anisotropy was used. The scaling made a good collapse, meaning that the right TcT_cTc​ and the correct critical exponents where used. The scaling did not take into account a magnetic field and therefore a good collapse of curves where not obtained in this case. When the cubic anisotropy was added the critical exponent for the magnetic susceptibility and the cubic order parameter changed, while the other exponents where unchanged. This supports the view that cubic anisotropy is dangerously irrelevant for the 3D XY model. The scaling of the magnetic susceptibility showed a possible new kind of scaling, a scaling which is different on the two sides of the transition. Although a more accurate determination of the critical exponent in the ordered phase require more extensive simulations. It appears that this exponent is larger than the exponent in the disordered phase, where one recovered the isotropic exponent. The difference in the critical exponents has been predicted to increase with ppp and an investigation of the hexagonal anisotropy p=6p=6p=6 has been started.
The critical behavior of a semi-infinite nnn-vector model with anisotropic ferromagnetic pair interactions on the surface and isotropic interactions everywhere else is studied with the use of renormalization-group methods for dimension $d=4\ensuremath{-}\ensuremath{\epsilon}$. The effects of surface anisotropies are analyzed near the isotropic ordinary transition (where they produce corrections to scaling), near the isotropic special transition (where they are relevant perturbations), and near a new class of "anisotropic special" transitions. The latter occur if the surface exchange constants associated with me{m}_{e}me​ (easy-magnetization) components take a critical value above which me{m}_{e}me​-component surface order is possible while the interaction constants of the remaining ${m}_{h}=n\ensuremath{-}{m}_{e}$ (hard-magnetization) components are weaker. Of particular interest is the anisotropic special transition with an easy axis (me=1{m}_{e}=1me​=1) because it occurs also in three dimensions, in contrast to the isotropic special one. The associated critical, crossover, and correction-to-scaling exponents are given to second order in $\ensuremath{\epsilon}$.
We investigate the controversial issue of the existence of universality classes describing critical phenomena in three-dimensional systems characterized by a matrix order parameter with symmetry $\mathrm{O}(2)\ensuremath{\bigotimes}\mathrm{O}(N)$ and symmetry-breaking pattern $\mathrm{O}(2)\ensuremath{\bigotimes}\mathrm{O}(N)\ensuremath{\rightarrow}\mathrm{O}(2)\ensuremath{\bigotimes}\mathrm{O}(N\ensuremath{-}2)$. Physical realizations of these systems are, for example, frustrated spin models with noncollinear order. Starting from the field-theoretical Landau-Ginzburg-Wilson Hamiltonian, we consider the massless critical theory and the minimal-subtraction scheme without ϵϵϵ expansion. The three-dimensional analysis of the corresponding five-loop series shows the existence of a stable fixed point for N=2N=2N=2 and N=3N=3N=3, confirming recent field-theoretical results based on a six-loop expansion in the alternative zero-momentum renormalization scheme defined in the massive disordered phase. In addition, we report numerical Monte Carlo simulations of a class of three-dimensional $\mathrm{O}(2)\ensuremath{\bigotimes}\mathrm{O}(2)$-symmetric lattice models. The results provide further support to the existence of the $\mathrm{O}(2)\ensuremath{\bigotimes}\mathrm{O}(2)$ universality class predicted by the field-theoretical analyses.
The Monte Carlo renormalization group is applied to the three-dimensional Ising model on simple cubic lattices with 83{8}^{3}83, 163{16}^{3}163, 323{32}^{3}323, and 643{64}^{3}643 sites. The comparison of block-spin correlation functions from the largest lattices yields the nearest-neighbor critical coupling K1c=0.221654(6){K}_{1}^{c}=0.221654(6)K1c​=0.221654(6). After allowing for (i) interpolation to this best estimate for K1c{K}_{1}^{c}K1c​, (ii) an apparent finite-size effect in the renormalization-group transformation due to the measurement of correlation functions of too few (seven) operators, and (iii) the extrapolation for the effect of a slow transient towards the fixed point, the values $\ensuremath{\nu}=0.629(4)$ and $\ensuremath{\eta}=0.031(5)$ are obtained for the thermal and magnetic exponents. The correction-to-scaling exponent $\ensuremath{\omega}$ is estimated to be around 1; to obtain an accuracy competitive with other methods requires measurements with more than seven operators. We briefly review the problem of redundant operators and indicate the future prospects for this kind of calculation.
We study the three-component ${\ensuremath{\phi}}^{4}$ model on the simple cubic lattice in the presence of a cubic perturbation. To this end, we perform Monte Carlo simulations in conjunction with a finite-size scaling analysis of the data. The analysis of the renormalization group (RG) flow of a dimensionless quantity provides us with the accurate estimate ${Y}_{4}\ensuremath{-}{\ensuremath{\omega}}_{2}=0.000\phantom{\rule{0.16em}{0ex}}81(7)$ for the difference of the RG eigenvalue Y4{Y}_{4}Y4​ at the O(3)\text{O}(3)O(3)-symmetric fixed point and the correction exponent ${\ensuremath{\omega}}_{2}$ at the cubic fixed point. We determine an effective exponent ${\ensuremath{\nu}}_{\text{eff}}$ of the correlation length that depends on the strength of the breaking of the O(3)\text{O}(3)O(3) symmetry. Field theory predicts that depending on the sign of the cubic perturbation, the RG flow is attracted by the cubic fixed point, or runs to an ever increasing amplitude, indicating a fluctuation-induced first-order phase transition. We demonstrate directly the first-order nature of the phase transition for a sufficiently strong breaking of the O(3) symmetry. We obtain accurate results for the latent heat, the correlation length in the disordered phase at the transition temperature, and the interface tension for interfaces between one of the ordered phases and the disordered phase. We study how these quantities scale with the RG flow, allowing quantitative predictions for weaker breaking of the O(3)\text{O}(3)O(3) symmetry.
Critical phenomena and Goldstone mode effects in spin models with the O(n) rotational symmetry are considered. Starting with Goldstone mode singularities in the XY and O(4) models, we briefly review various theoretical concepts, as well as state-of-the-art Monte Carlo simulation results. They support recent results of the GFD (grouping of Feynman diagrams) theory, stating that these singularities are described by certain nontrivial exponents, which differ from those predicted earlier by perturbative treatments. Furthermore, we present the recent Monte Carlo simulation results of the three-dimensional Ising model for lattices with linear sizes up to L = 1536, which are very large as compared to L ≤ 128 usually used in the finite-size scaling analysis. These results are obtained, using a parallel OpenMP implementation of the Wolff single-cluster algorithm. The finite-size scaling analysis of the critical exponent η, assuming the usually accepted correction-to-scaling exponent ω ≈ 0.8, shows that η is likely to be somewhat larger than the value 0.0335 ± 0.0025 of the perturbative renormalization group (RG) theory. Moreover, we have found that the actual data can be well described by different critical exponents: η = ω =1/8 and ν = 2/3, found within the GFD theory.