We study a generalized clock model on the simple cubic lattice. The parameter of the model can be tuned such that the amplitude of the leading correction to scaling vanishes. In the main part of the study, we simulate the model with
Z8 symmetry. At the transition, with increasing length scale,
O(2) symmetry emerges. We perform Monte Carlo simulations using a hybrid of local Metropolis and cluster algorithms of lattices with a linear size up to
L=512. The field variable requires less memory and the updates are faster than for a model with
O(2) symmetry at the microscopic level. Our finite-size scaling analysis yields accurate estimates for the critical exponents of the three-dimensional
XY-universality class. In particular, we get $\ensuremath{\eta}=0.03810(8),\ensuremath{\nu}=0.67169(7)$, and $\ensuremath{\omega}=0.789(4)$. Furthermore, we obtain estimates for fixed point values of phenomenological couplings and critical temperatures.
We have simulated the three-dimensional Heisenberg model on simple cubic lattices, using the single-cluster Monte Carlo update algorithm. The expected pronounced reduction of critical slowing down at the phase transition is verified. This allows simulations on significantly larger lattices than in previous studies and consequently a better control over systematic errors. In one set of simulations we employ the usual finite-size scaling methods to compute the critical exponents \ensuremath{\nu},\ensuremath{\alpha},\ensuremath{\beta},\ensuremath{\gamma},\ensuremath{\eta} from a few measurements in the vicinity of the critical point, making extensive use of histogram reweighting and optimization techniques. In another set of simulations we report measurements of improved estimators for the spatial correlation length and the susceptibility in the high-temperature phase, obtained on lattices with up to
1003 spins. This enables us to compute independent estimates of \ensuremath{\nu} and \ensuremath{\gamma} from power-law fits of their critical divergencies.
In this master thesis the criticality of the 3D XY model with cubic anisotropy has been examined by the means of Monte Carlo simulation. The 3D XY model is a special case of the
O(n) spin-vector model which describe numerous phenomena's. Here,
n is the number of vector dimensions and for the XY model
n=2. The
O(n)-model is invariant for global rotations. This means that it is arbitrary which direction in the symmetry breaking occurs. In real system one should always expect perturbations from a perfect system, here it is done by adding a cubic anisotropy (order
p=4) then the symmetry of the Hamiltonian is lowered and it will be advantageous for the spins to be ordered in directions
90o apart. This symmetry is called
C4, which is a part of the cyclic group, and it restricts the symmetry breaking to one of these four directions. \n\nThe criticality of this model is when the spins suddenly align as the temperature is lowered to a critical temperature. Sufficiently close to the critical temperature quantities like the magnetization, which is the sum of spins, will show a power law growth characterised by critical exponents specified by the class of universality of the transition. The critical exponents can be obtained by finite-size scaling. By applying renormalization theory on the critical region one can show that some of parameters in the Hamiltonian are: relevant and effect the scaling, irrelevant and does not effect the scaling and dangerously irrelevant meaning that they only affect some of the critical exponents. Previous Monte Carlo and renormalization calculus show that anisotropy which is relevant for
p<4 becomes dangerously irrelevant for
pgeq4. The question of interest is what kind of effect the dangerously irrelevant parameter in the Hamiltonian has on the scaling. This is interesting because the effect of dangerously irrelevant parameters is hardly studied and anisotropy arise in many crystal systems because of the lattice geometry. \n\nThe results are obtained by Monte Carlo simulations and the critical slowing down close to the phase transition is solved by the method of parallel tempering. This method was chosen because it is simple to implement in a parallel code.\n\nThe Binder cumulant for different quantities and the peak of the magnetic susceptibility was used support a critical temperature
Tc=2.2019textnormalk for no field applied and no anisotropy. The known critical exponents for the no field and no anisotropy was used. The scaling made a good collapse, meaning that the right
Tc and the correct critical exponents where used. The scaling did not take into account a magnetic field and therefore a good collapse of curves where not obtained in this case. When the cubic anisotropy was added the critical exponent for the magnetic susceptibility and the cubic order parameter changed, while the other exponents where unchanged. This supports the view that cubic anisotropy is dangerously irrelevant for the 3D XY model. The scaling of the magnetic susceptibility showed a possible new kind of scaling, a scaling which is different on the two sides of the transition. Although a more accurate determination of the critical exponent in the ordered phase require more extensive simulations. It appears that this exponent is larger than the exponent in the disordered phase, where one recovered the isotropic exponent. The difference in the critical exponents has been predicted to increase with
p and an investigation of the hexagonal anisotropy
p=6 has been started.
We have used Monte Carlo simulations, combined with finite-size scaling and two different real-space renormalization group approaches, to study a fully frustrated three-dimensional
XY model on a simple cubic lattice. This model corresponds to a lattice of Josephson-coupled superconducting grains in an applied magnetic field $\mathbf{H}=({\ensuremath{\Phi}}_{0}∕{a}^{2})(1∕2,1∕2,1∕2)$. We find that the model has a continuous phase transition with critical temperature
Tc=0.681J∕kB, where
J is the
XY coupling constant, and critical exponents $\ensuremath{\alpha}∕\ensuremath{\nu}=0.87\ifmmode\pm\else\textpm\fi{}0.01$, $v∕\ensuremath{\nu}=0.82\ifmmode\pm\else\textpm\fi{}0.01$, and $\ensuremath{\nu}=0.72\ifmmode\pm\else\textpm\fi{}0.07$, where $\ensuremath{\alpha}$,
v, and $\ensuremath{\nu}$ describe the critical behavior of the specific heat, helicity modulus, and correlation length. We briefly compare our results with other studies of this model, and with a mean-field approximation.
We study the critical behavior of a generalized icosahedral model on the simple cubic lattice. The field variable of the icosahedral model might take 1 of 12 vectors of unit length which are given by the normalized vertices of the icosahedron as value. Similar to the Blume-Capel model, where in addition to $\ensuremath{-}1$ and 1, as in the Ising model, the spin might take the value 0, we add in the generalized model (0,0,0) as allowed value. There is a parameter
D that controls the density of these voids. For a certain range of
D, the model undergoes a second-order phase transition. On the critical line,
O(3) symmetry emerges. Furthermore, we demonstrate that within this range, similar to the Blume-Capel model on the simple cubic lattice, there is a value of
D, where leading corrections to scaling vanish. We perform Monte Carlo simulations for lattices of a linear size up to
L=400 by using a hybrid of local Metropolis and cluster updates. The motivation to study this particular model is mainly of technical nature. Less memory and CPU time are needed than for a model with
O(3) symmetry at the microscopic level. As the result of a finite-size scaling analysis we obtain $\ensuremath{\nu}=0.711\phantom{\rule{0.16em}{0ex}}64(10)$, $\ensuremath{\eta}=0.037\phantom{\rule{0.16em}{0ex}}84(5)$, and $\ensuremath{\omega}=0.759(2)$ for the critical exponents of the three-dimensional Heisenberg universality class. The estimate of the irrelevant renormalization group eigenvalue that is related with the breaking the
O(3) symmetry is ${y}_{\mathrm{ico}}=\ensuremath{-}2.19(2)$.