Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1106.3376 · Physical Review E

Dimer model on a triangular lattice

N. Sh. Izmailian, Ralph Kenna B

Published Aug 4, 2011• 18 citations
arXivHTMLPDF

Abstract

We analyze the partition function of the dimer model on an $\mathcal{M}\ifmmode\times\else\texttimes\fi{}\mathcal{N}$ triangular lattice wrapped on a torus obtained by Fendley, Moessner, and Sondhi [Phys. Rev. B 66, 214513 (2002)]. From a finite-size analysis we have found that the dimer model on such a lattice can be described by a conformal field theory having a central charge $c=\ensuremath{-}2$. The shift exponent for the specific heat is found to depend on the parity of the number of lattice sites $\mathcal{N}$ along a given lattice axis: e.g., for odd $\mathcal{N}$ we obtain the shift exponent $\ensuremath{\lambda}=1$, while for even $\mathcal{N}$ it is infinite ($\ensuremath{\lambda}=\ensuremath{\infty}$). In the former case, therefore, the finite-size specific-heat pseudocritical point is size dependent, while in the latter case it coincides with the critical point of the thermodynamic limit.

DOI
10.1103/physreve.84.021107

Related papers

Finite-size corrections and scaling for the triangular lattice dimer model with periodic boundary conditions

N. Sh. Izmailian, Koryun B. Oganesyan, Ming‐Chya Wu +1 more

We analyze the partition function of the dimer model on M x N triangular lattice wrapped on the torus obtained by Fendley, Moessner, and Sondhi [Phys. Rev. B 66, 214513, (2002)]. Based on such an expression, we then extend the algorithm of Ivashkevich, Izmailian, and Hu [J. Phys. A 35, 5543 (2002)] to derive the exact asymptotic expansion of the first and second derivatives of the logarithm of the partition function at the critical point and find that the aspect-ratio dependence of finite-size corrections and the finite-size scaling functions are sensitive to the parity of the number of lattice sites along the lattice axis.

Physical Review E•Jan 24, 2006•34 citations

Finite-size corrections and scaling for the dimer model on the checkerboard lattice

N. Sh. Izmailian, Ming-Chya Wu, Chin‐Kun Hu

Lattice models are useful for understanding behaviors of interacting complex many-body systems. The lattice dimer model has been proposed to study the adsorption of diatomic molecules on a substrate. Here we analyze the partition function of the dimer model on a 2M×2N checkerboard lattice wrapped on a torus and derive the exact asymptotic expansion of the logarithm of the partition function. We find that the internal energy at the critical point is equal to zero. We also derive the exact finite-size corrections for the free energy, the internal energy, and the specific heat. Using the exact partition function and finite-size corrections for the dimer model on a finite checkerboard lattice, we obtain finite-size scaling functions for the free energy, the internal energy, and the specific heat of the dimer model. We investigate the properties of the specific heat near the critical point and find that the specific-heat pseudocritical point coincides with the critical point of the thermodynamic limit, which means that the specific-heat shift exponent λ is equal to ∞. We have also considered the limit N→∞ for which we obtain the expansion of the free energy for the dimer model on the infinitely long cylinder. From a finite-size analysis we have found that two conformal field theories with the central charges c=1 for the height function description and c=-2 for the construction using a mapping of spanning trees can be used to describe the dimer model on the checkerboard lattice.

arXiv:1611.03200•Physical review. E•Nov 23, 2016•8 citations

Specific heat and partition function zeros for the dimer model on the checkerboard B lattice: Finite-size effects

Chi-Ning Chen, Chin‐Kun Hu, N. Sh. Izmailian +1 more

There are three possible classifications of the dimer weights on the bonds of the checkerboard lattice and they are denoted as checkerboard A, B, and C lattices [Phys. Rev. E 91, 062139 (2015)PLEEE81539-375510.1103/PhysRevE.91.062139]. The dimer model on the checkerboard B and C lattices has much richer critical behavior compared to the dimer model on the checkerboard A lattice. In this paper we study in full detail the dimer model on the checkerboard B lattice. The dimer model on the checkerboard B lattice has two types of critical behavior. In one limit this model is the anisotropic dimer model on rectangular lattice with algebraic decay of correlators and in another limit it is the anisotropic generalized Kasteleyn model with radically different critical behavior. We analyze the partition function of the dimer model on a 2M×2N checkerboard B lattice wrapped on a torus. We find very unusual behavior of the partition function zeros and the specific heat of the dimer model. Remarkably, the partition function zeros of finite-size systems can have very interesting structures, made of rings, concentric circles, radial line segments, or even arabesque structures. We find out that the number of the specific heat peaks and the number of circles of the partition function zeros increases with the system size. The lattice anisotropy of the model has strong effects on the behavior of the specific heat, dominating the relation between the correlation length exponent ν and the shift exponent λ, and λ is generally unequal to 1/ν (λ≠1/ν).

Physical review. E•Jan 2, 2019•4 citations

Zero-temperature properties of the quantum dimer model on the triangular lattice

Arnaud Ralko, Michel Ferrero, Federico Becca +2 more

Using exact diagonalizations and Green's function Monte Carlo simulations, we have studied the zero-temperature properties of the quantum dimer model on the triangular lattice on clusters with up to 588 sites. A detailed comparison of the properties in different topological sectors as a function of the cluster size and for different cluster shapes has allowed us to identify different phases, to show explicitly the presence of topological degeneracy in a phase close to the Rokhsar-Kivelson point, and to understand finite-size effects inside this phase. The nature of the various phases has been further investigated by calculating dimer-dimer correlation functions. The present results confirm and complement the phase diagram proposed by Moessner and Sondhi on the basis of finite-temperature simulations [Phys. Rev. Lett. 86, 1881 (2001)].

arXiv:cond-mat/0502294•Physical Review B•Jun 23, 2005•86 citations

Finite-size effect for the critical point of an anisotropic dimer model of domain walls

Somendra M. Bhattacharjee, John F. Nagle

The finite-size effect is studied in the Kasteleyn model of dimers on the brick lattice. This model is isomorphic to an anisotropic domain-wall model. Asymptotic analysis of the exact Pfaffian solution for the specific heat establishes that finite-size-scaling theory is valid near the critical point of this model. The finite-size-scaling function is a function of a scaled temperature variable \ensuremath{\tau} and a shape factor scrr=${N}^{2}$/M, where 2N is the number of lattice points in the direction perpendicular to the preferred axis for the domain walls and 2M is the number of lattice points parallel to the preferred axis. The scaled temperature variable \ensuremath{\tau} is given by ${\mathrm{MN}}^{2}$t/(M+${N}^{2}$), where t is the reduced temperature. As a function of \ensuremath{\tau} the scaling function scrP(\ensuremath{\tau},scrr) is a sequence of \ensuremath{\delta} functions in the limit scrr=0 and a smooth single-peaked function in the limit scrr=\ensuremath{\infty}. In the latter case the specific heat per lattice site can be written as ,\ensuremath{\infty}), where \ensuremath{\alpha} is the bulk specific-heat exponent with the known value of (1/2) and ${\ensuremath{\nu}}_{M}$ is found to have the value of 1. In the case scrr=0, the specific heat per lattice site can be written in an equivalent form by replacing M by N and ${\ensuremath{\nu}}_{m}$ by ${\ensuremath{\nu}}_{N}$ which takes the value ${\ensuremath{\nu}}_{N}$=(1/2). According to finite-size-scaling theory ${\ensuremath{\nu}}_{M}$ and ${\ensuremath{\nu}}_{N}$ may be interpreted to be the critical exponents ${\ensuremath{\nu}}_{\mathrm{y}}$ and ${\ensuremath{\nu}}_{\mathrm{x}}$, respectively, of the divergent length scales in the two principal directions. Our exact values of ${\ensuremath{\nu}}_{m}$ and ${\ensuremath{\nu}}_{N}$ are in agreement with the values of ${\ensuremath{\nu}}_{\mathrm{y}}$ and ${\ensuremath{\nu}}_{\mathrm{x}}$ predicted for general anisotropic domain-wall models.

Physical Review A•May 1, 1985•47 citations

The Ising model on tetrahedron-like lattices: a finite-size analysis

Oscar Diego, J. González, Jesús Salas

We study, using dimer and Monte Carlo approaches, the critical properties and finite-size effects of the Ising model on honeycomb lattices folded on the tetrahedron. We show that the main critical exponents are not affected by the presence of conical singularities. The finite-size scaling of the position of the maxima of the specific heat does not match, however, with the scaling of the correlation length, and the thermodynamic limit is attained faster on the spherical surface than in corresponding lattices on the torus.

arXiv:hep-lat/9307018•Journal of Physics A Mathematical and General•May 7, 1994•22 citations
We analyze the partition function of the dimer model on an M\ifmmode×\else\texttimes\fiN\mathcal{M}\ifmmode\times\else\texttimes\fi{}\mathcal{N}M\ifmmode×\else\texttimes\fiN triangular lattice wrapped on a torus obtained by Fendley, Moessner, and Sondhi [Phys. Rev. B 66, 214513 (2002)]. From a finite-size analysis we have found that the dimer model on such a lattice can be described by a conformal field theory having a central charge c=\ensuremath−2c=\ensuremath{-}2c=\ensuremath−2. The shift exponent for the specific heat is found to depend on the parity of the number of lattice sites N\mathcal{N}N along a given lattice axis: e.g., for odd N\mathcal{N}N we obtain the shift exponent \ensuremathλ=1\ensuremath{\lambda}=1\ensuremathλ=1, while for even N\mathcal{N}N it is infinite (\ensuremathλ=\ensuremath∞\ensuremath{\lambda}=\ensuremath{\infty}\ensuremathλ=\ensuremath∞). In the former case, therefore, the finite-size specific-heat pseudocritical point is size dependent, while in the latter case it coincides with the critical point of the thermodynamic limit.
We analyze the partition function of the dimer model on M x N triangular lattice wrapped on the torus obtained by Fendley, Moessner, and Sondhi [Phys. Rev. B 66, 214513, (2002)]. Based on such an expression, we then extend the algorithm of Ivashkevich, Izmailian, and Hu [J. Phys. A 35, 5543 (2002)] to derive the exact asymptotic expansion of the first and second derivatives of the logarithm of the partition function at the critical point and find that the aspect-ratio dependence of finite-size corrections and the finite-size scaling functions are sensitive to the parity of the number of lattice sites along the lattice axis.
Lattice models are useful for understanding behaviors of interacting complex many-body systems. The lattice dimer model has been proposed to study the adsorption of diatomic molecules on a substrate. Here we analyze the partition function of the dimer model on a 2M×2N checkerboard lattice wrapped on a torus and derive the exact asymptotic expansion of the logarithm of the partition function. We find that the internal energy at the critical point is equal to zero. We also derive the exact finite-size corrections for the free energy, the internal energy, and the specific heat. Using the exact partition function and finite-size corrections for the dimer model on a finite checkerboard lattice, we obtain finite-size scaling functions for the free energy, the internal energy, and the specific heat of the dimer model. We investigate the properties of the specific heat near the critical point and find that the specific-heat pseudocritical point coincides with the critical point of the thermodynamic limit, which means that the specific-heat shift exponent λ is equal to ∞. We have also considered the limit N→∞ for which we obtain the expansion of the free energy for the dimer model on the infinitely long cylinder. From a finite-size analysis we have found that two conformal field theories with the central charges c=1 for the height function description and c=-2 for the construction using a mapping of spanning trees can be used to describe the dimer model on the checkerboard lattice.
There are three possible classifications of the dimer weights on the bonds of the checkerboard lattice and they are denoted as checkerboard A, B, and C lattices [Phys. Rev. E 91, 062139 (2015)PLEEE81539-375510.1103/PhysRevE.91.062139]. The dimer model on the checkerboard B and C lattices has much richer critical behavior compared to the dimer model on the checkerboard A lattice. In this paper we study in full detail the dimer model on the checkerboard B lattice. The dimer model on the checkerboard B lattice has two types of critical behavior. In one limit this model is the anisotropic dimer model on rectangular lattice with algebraic decay of correlators and in another limit it is the anisotropic generalized Kasteleyn model with radically different critical behavior. We analyze the partition function of the dimer model on a 2M×2N checkerboard B lattice wrapped on a torus. We find very unusual behavior of the partition function zeros and the specific heat of the dimer model. Remarkably, the partition function zeros of finite-size systems can have very interesting structures, made of rings, concentric circles, radial line segments, or even arabesque structures. We find out that the number of the specific heat peaks and the number of circles of the partition function zeros increases with the system size. The lattice anisotropy of the model has strong effects on the behavior of the specific heat, dominating the relation between the correlation length exponent ν and the shift exponent λ, and λ is generally unequal to 1/ν (λ≠1/ν).
Using exact diagonalizations and Green's function Monte Carlo simulations, we have studied the zero-temperature properties of the quantum dimer model on the triangular lattice on clusters with up to 588 sites. A detailed comparison of the properties in different topological sectors as a function of the cluster size and for different cluster shapes has allowed us to identify different phases, to show explicitly the presence of topological degeneracy in a phase close to the Rokhsar-Kivelson point, and to understand finite-size effects inside this phase. The nature of the various phases has been further investigated by calculating dimer-dimer correlation functions. The present results confirm and complement the phase diagram proposed by Moessner and Sondhi on the basis of finite-temperature simulations [Phys. Rev. Lett. 86, 1881 (2001)].
The finite-size effect is studied in the Kasteleyn model of dimers on the brick lattice. This model is isomorphic to an anisotropic domain-wall model. Asymptotic analysis of the exact Pfaffian solution for the specific heat establishes that finite-size-scaling theory is valid near the critical point of this model. The finite-size-scaling function is a function of a scaled temperature variable \ensuremath{\tau} and a shape factor scrr=N2{N}^{2}N2/M, where 2N is the number of lattice points in the direction perpendicular to the preferred axis for the domain walls and 2M is the number of lattice points parallel to the preferred axis. The scaled temperature variable \ensuremath{\tau} is given by MN2{\mathrm{MN}}^{2}MN2t/(M+N2{N}^{2}N2), where t is the reduced temperature. As a function of \ensuremath{\tau} the scaling function scrP(\ensuremath{\tau},scrr) is a sequence of \ensuremath{\delta} functions in the limit scrr=0 and a smooth single-peaked function in the limit scrr=\ensuremath{\infty}. In the latter case the specific heat per lattice site can be written as ,\ensuremath{\infty}), where \ensuremath{\alpha} is the bulk specific-heat exponent with the known value of (1/2) and ${\ensuremath{\nu}}_{M}$ is found to have the value of 1. In the case scrr=0, the specific heat per lattice site can be written in an equivalent form by replacing M by N and ${\ensuremath{\nu}}_{m}$ by ${\ensuremath{\nu}}_{N}$ which takes the value ${\ensuremath{\nu}}_{N}$=(1/2). According to finite-size-scaling theory ${\ensuremath{\nu}}_{M}$ and ${\ensuremath{\nu}}_{N}$ may be interpreted to be the critical exponents ${\ensuremath{\nu}}_{\mathrm{y}}$ and ${\ensuremath{\nu}}_{\mathrm{x}}$, respectively, of the divergent length scales in the two principal directions. Our exact values of ${\ensuremath{\nu}}_{m}$ and ${\ensuremath{\nu}}_{N}$ are in agreement with the values of ${\ensuremath{\nu}}_{\mathrm{y}}$ and ${\ensuremath{\nu}}_{\mathrm{x}}$ predicted for general anisotropic domain-wall models.
We study, using dimer and Monte Carlo approaches, the critical properties and finite-size effects of the Ising model on honeycomb lattices folded on the tetrahedron. We show that the main critical exponents are not affected by the presence of conical singularities. The finite-size scaling of the position of the maxima of the specific heat does not match, however, with the scaling of the correlation length, and the thermodynamic limit is attained faster on the spherical surface than in corresponding lattices on the torus.