Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1106.0842 · Journal of Physics B Atomic Molecular and Optical Physics

Three-axis measurement and cancellation of background magnetic fields to less than 50 µG in a cold atom experiment

Aaron C.T. Smith, Brian E. Anderson, S Chaudhury, Poul Jessen

Published Sep 29, 2011• 29 citations
arXivHTMLPDF

Abstract

Many experiments involving cold and ultracold atomic gases require very precise control of magnetic fields that couple to and drive the atomic spins. Examples include quantum control of atomic spins, quantum control and quantum simulation in optical lattices, and studies of spinor Bose condensates. This makes accurate cancellation of the (generally time dependent) background magnetic field a critical factor in such experiments. We describe a technique that uses the atomic spins themselves to measure dc and ac components of the background field independently along three orthogonal axes, with a resolution of a few tens of µG in a bandwidth of ∼1 kHz. Once measured, the background field can be cancelled with three pairs of compensating coils driven by arbitrary waveform generators. In our laboratory, the magnetic field environment is sufficiently stable for the procedure to reduce the field along each axis to less than ∼50 µG rms, corresponding to a suppression of the ac part by about one order of magnitude. This suggests that our approach can provide access to a new low-field regime in cold atom experiments.

DOI
10.1088/0953-4075/44/20/205002

Related papers

A simple magnetic field stabilization technique for atomic Bose–Einstein condensate experiments

S. Tiengo, R. Eid, M. Apfel +2 more

We demonstrate a simple magnetic field stabilization technique in a Bose-Einstein condensate experiment. Our technique is based on the precise measurement of the current fluctuations in the main magnetic field coils and amounts to their feedforward compensation using an auxiliary coil. It has the advantage of simplicity as the auxiliary coils can be straightforwardly driven at the relevant frequencies (<1 kHz). The performances of the different components (power supply, current transducer, electronics…) are precisely characterized. In addition, for optimal stability, the ambient magnetic field is also measured and compensated. The magnetic field stability around 57 G is measured by Ramsey spectroscopy of a magnetic field sensitive radio frequency transition between two spin states of potassium 39, and the shot-to-shot fluctuations are reduced to 64(7) μG rms, i.e., at the 1 × 10-6 level. In the context of our experiment, this result opens interesting prospects for the study of three-body interactions in Bose-Einstein condensate potassium spin mixtures.

arXiv:2501.11375•Review of Scientific Instruments•Jun 1, 2025•6 citations

Direct control of high magnetic fields for cold atom experiments based on NV centers

Alexander Hesse, Kerim Köster, Jakob M. Steiner +5 more

Abstract In ultracold quantum gases, the interactions between the individual atoms can be controlled by applying magnetic bias fields. As magnetic field fluctuations limit the precision here, typically a feedback loop needs to be employed to regulate the current through a pair of Helmholtz coils. No commercially available magnetic field sensor allows to measure large fields directly with high enough precision, leading to many unsatisfactory solutions being used in experiments. Here, we demonstrate a direct magnetic field stabilization in a regime previously not accessible, using NV centers as the magnetic field sensor. This allows us to measure and stabilize fields of 4.66 mT down to 12 nT RMS noise over the course of 24 h, measured on a 1 Hz bandwidth. We achieve a control of better than 1 ppm after 20 min of integration time, ensuring high long-term stability for experiments. This approach extends direct magnetic field control to strong magnetic fields, which could enable new precise quantum simulations in this regime.

arXiv:2003.08101•New Journal of Physics•Feb 1, 2021•8 citations

Simple and active magnetic-field stabilization for cold atom experiments

Zhi-Xin Duan, Wei-Tao Wu, Yuetong Lin +1 more

Cold atom experiments usually need a controllable and low-noise bias magnetic field to provide a quantization axis. Most labs need home-made stabilization of the field according to the actual setup, as commercially available power supply cannot directly satisfy their requirements. Here, by measuring the field fluctuations and active feedback modulating current supply of the applied magnetic field, we successfully demonstrate a field of 10.58 G with a stability to the level of 2.8 × 10−7 in a duration of 5 min. The root mean square noise is reduced to 0.05 mG, compared to the noise of 1.3 mG without stabilization. The coherence time of the magnetic-field sensitive transition between the rubidium ground states F=1,mF=−1 and 1,0, as measured by Rabi oscillation, is extended to 19.2 ms from the unstabilized value of 1.3 ms. This result is long enough for most experiments on quantum simulation and precision measurement. As our system has no passive magnetic shielding and additional compensation coils, it is highly simple and compact to provide the stable magnetic field and would be adapted to various applications with cold atoms.

Review of Scientific Instruments•Dec 1, 2022•13 citations

Design and characterization of a compact magnetic shield for ultracold atomic gas experiments

A. Farolfi, Dimitrios Trypogeorgos, G. Colzi +3 more

We report on the design, construction, and performance of a compact magnetic shield that facilitates a controlled, low-noise environment for experiments with ultracold atomic gases. The shield was designed to passively attenuate external slowly varying magnetic fields while allowing for ample optical access. The geometry, number of layers, and choice of materials were optimized using extensive finite-element numerical simulations. The measured performance of the shield is in good agreement with the simulations. From measurements of the spin coherence of an ultracold atomic ensemble, we demonstrate a residual field noise of 2.6 μG and a suppression of external dc magnetic fields by more than five orders of magnitude.

arXiv:1907.06457•Review of Scientific Instruments•Nov 1, 2019•44 citations

Ultra-low noise magnetic field for quantum gases

Xiao-Tian Xu, Zong-Yao Wang, Rui-Heng Jiao +3 more

A ultralow noise magnetic field is essential for many branches of scientific research. Examples include experiments conducted on ultracold atoms, quantum simulations, and precision measurements. In ultracold atom experiments specifically, a bias magnetic field will often serve as a quantization axis and be applied for Zeeman splitting. As atomic states are usually sensitive to magnetic fields, a magnetic field characterized by ultralow noise as well as high stability is typically required for experimentation. For this study, a bias magnetic field is successfully stabilized at 14.5 G, with the root mean square value of the noise reduced to 18.5 μG (1.28 ppm) by placing μ-metal magnetic shields together with a dynamical feedback circuit. Long-time instability is also regulated consistently below 7 μG. The level of noise exhibited in the bias magnetic field is further confirmed by evaluating the coherence time of a Bose-Einstein condensate characterized by Rabi oscillation. It is concluded that this approach can be applied to other physical systems as well.

arXiv:1904.11642•Review of Scientific Instruments•May 1, 2019•50 citations

Fast magnetic coil controller for cold atom experiments

Leonardo Uhthoff-Rodríguez, A. Hernández-López, Edgar Giovanni Alonso-Torres +5 more

Cold atom experiments utilize magnetic fields, commonly generated by coils, as an essential tool to control and manipulate atomic samples. In these experiments, it is often necessary to rapidly switch the magnetic field between two values. However, typical power supplies have a limited switching time for the current flowing through the coil. We present a control scheme implemented as an electronic circuit that overcomes this limitation. A faster control is achieved by momentarily applying an on-demand high voltage when the control signal variation surpasses the limits that the conventional power supply can follow, allowing a faster current flow into the magnetic coil. In our specific application, a coil with an inductance of 491 μH and a resistance of 0.26 Ω, corresponding to a time constant of ∼1.9 ms, is driven so that its current faithfully follows the control signals from -1 to 1 A. It is capable of completing a full-scale transition in just ∼31 μs, with an effective bandwidth of 15.2 kHz. This corresponds to an improvement by a factor of more than 20 in both bandwidth and switching speed over a conventional power supply. By appropriately selecting the components of the circuit, both the bandwidth and switching time can be tuned to match specific needs within a wide range of inductive and power requirements.

arXiv:2503.22554•Review of Scientific Instruments•Oct 1, 2025•1 citation
Many experiments involving cold and ultracold atomic gases require very precise control of magnetic fields that couple to and drive the atomic spins. Examples include quantum control of atomic spins, quantum control and quantum simulation in optical lattices, and studies of spinor Bose condensates. This makes accurate cancellation of the (generally time dependent) background magnetic field a critical factor in such experiments. We describe a technique that uses the atomic spins themselves to measure dc and ac components of the background field independently along three orthogonal axes, with a resolution of a few tens of µG in a bandwidth of ∼1 kHz. Once measured, the background field can be cancelled with three pairs of compensating coils driven by arbitrary waveform generators. In our laboratory, the magnetic field environment is sufficiently stable for the procedure to reduce the field along each axis to less than ∼50 µG rms, corresponding to a suppression of the ac part by about one order of magnitude. This suggests that our approach can provide access to a new low-field regime in cold atom experiments.
We demonstrate a simple magnetic field stabilization technique in a Bose-Einstein condensate experiment. Our technique is based on the precise measurement of the current fluctuations in the main magnetic field coils and amounts to their feedforward compensation using an auxiliary coil. It has the advantage of simplicity as the auxiliary coils can be straightforwardly driven at the relevant frequencies (<1 kHz). The performances of the different components (power supply, current transducer, electronics…) are precisely characterized. In addition, for optimal stability, the ambient magnetic field is also measured and compensated. The magnetic field stability around 57 G is measured by Ramsey spectroscopy of a magnetic field sensitive radio frequency transition between two spin states of potassium 39, and the shot-to-shot fluctuations are reduced to 64(7) μG rms, i.e., at the 1 × 10-6 level. In the context of our experiment, this result opens interesting prospects for the study of three-body interactions in Bose-Einstein condensate potassium spin mixtures.
Abstract In ultracold quantum gases, the interactions between the individual atoms can be controlled by applying magnetic bias fields. As magnetic field fluctuations limit the precision here, typically a feedback loop needs to be employed to regulate the current through a pair of Helmholtz coils. No commercially available magnetic field sensor allows to measure large fields directly with high enough precision, leading to many unsatisfactory solutions being used in experiments. Here, we demonstrate a direct magnetic field stabilization in a regime previously not accessible, using NV centers as the magnetic field sensor. This allows us to measure and stabilize fields of 4.66 mT down to 12 nT RMS noise over the course of 24 h, measured on a 1 Hz bandwidth. We achieve a control of better than 1 ppm after 20 min of integration time, ensuring high long-term stability for experiments. This approach extends direct magnetic field control to strong magnetic fields, which could enable new precise quantum simulations in this regime.
Cold atom experiments usually need a controllable and low-noise bias magnetic field to provide a quantization axis. Most labs need home-made stabilization of the field according to the actual setup, as commercially available power supply cannot directly satisfy their requirements. Here, by measuring the field fluctuations and active feedback modulating current supply of the applied magnetic field, we successfully demonstrate a field of 10.58 G with a stability to the level of 2.8 × 10−7 in a duration of 5 min. The root mean square noise is reduced to 0.05 mG, compared to the noise of 1.3 mG without stabilization. The coherence time of the magnetic-field sensitive transition between the rubidium ground states F=1,mF=−1 and 1,0, as measured by Rabi oscillation, is extended to 19.2 ms from the unstabilized value of 1.3 ms. This result is long enough for most experiments on quantum simulation and precision measurement. As our system has no passive magnetic shielding and additional compensation coils, it is highly simple and compact to provide the stable magnetic field and would be adapted to various applications with cold atoms.
We report on the design, construction, and performance of a compact magnetic shield that facilitates a controlled, low-noise environment for experiments with ultracold atomic gases. The shield was designed to passively attenuate external slowly varying magnetic fields while allowing for ample optical access. The geometry, number of layers, and choice of materials were optimized using extensive finite-element numerical simulations. The measured performance of the shield is in good agreement with the simulations. From measurements of the spin coherence of an ultracold atomic ensemble, we demonstrate a residual field noise of 2.6 μG and a suppression of external dc magnetic fields by more than five orders of magnitude.
A ultralow noise magnetic field is essential for many branches of scientific research. Examples include experiments conducted on ultracold atoms, quantum simulations, and precision measurements. In ultracold atom experiments specifically, a bias magnetic field will often serve as a quantization axis and be applied for Zeeman splitting. As atomic states are usually sensitive to magnetic fields, a magnetic field characterized by ultralow noise as well as high stability is typically required for experimentation. For this study, a bias magnetic field is successfully stabilized at 14.5 G, with the root mean square value of the noise reduced to 18.5 μG (1.28 ppm) by placing μ-metal magnetic shields together with a dynamical feedback circuit. Long-time instability is also regulated consistently below 7 μG. The level of noise exhibited in the bias magnetic field is further confirmed by evaluating the coherence time of a Bose-Einstein condensate characterized by Rabi oscillation. It is concluded that this approach can be applied to other physical systems as well.
Cold atom experiments utilize magnetic fields, commonly generated by coils, as an essential tool to control and manipulate atomic samples. In these experiments, it is often necessary to rapidly switch the magnetic field between two values. However, typical power supplies have a limited switching time for the current flowing through the coil. We present a control scheme implemented as an electronic circuit that overcomes this limitation. A faster control is achieved by momentarily applying an on-demand high voltage when the control signal variation surpasses the limits that the conventional power supply can follow, allowing a faster current flow into the magnetic coil. In our specific application, a coil with an inductance of 491 μH and a resistance of 0.26 Ω, corresponding to a time constant of ∼1.9 ms, is driven so that its current faithfully follows the control signals from -1 to 1 A. It is capable of completing a full-scale transition in just ∼31 μs, with an effective bandwidth of 15.2 kHz. This corresponds to an improvement by a factor of more than 20 in both bandwidth and switching speed over a conventional power supply. By appropriately selecting the components of the circuit, both the bandwidth and switching time can be tuned to match specific needs within a wide range of inductive and power requirements.