Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1105.0263 · Journal of the Physical Society of Japan

Tunability of Excited-State Energy Levels of Four-Josephson-Junction Circuit in Crossover from Double-Well to Single-Well Potential

Yoshihiro Shimazu

Published Apr 25, 2011• 2 citations
arXivHTMLPDF

Abstract

A double-loop four-Josephson-junction (4-JJ) flux qubit is a tunable qubit wherein the potential profile can be varied in situ via two applied magnetic fluxes. This provides a high level of control over state transitions. Here, we report the results of spectroscopic measurements on this system. We observed microwave resonances associated with the first and second excited states. A branch of resonances that is most likely attributable to the third excited state was also observed. The excitation energy spectra for these levels were in qualitative agreement with the results of simplified calculations performed using an effective Hamiltonian with two phases. The three lowest levels characterized in this study may allow novel applications, including those proposed theoretically in the past. Our analysis showed that the potential exhibited a crossover from the commonly used double-well regime to the novel single-well regime. This indicates the possibility of manipulation and readout of a 3-JJ (and 4-JJ) qubit in the single-well regime using a simple technique.

DOI
10.1143/jpsj.80.054701

Related papers

Spectroscopy of Josephson-Junction Flux Qubit with Controllable Energy Gap

Yoshihiro Shimazu, Y. Saito, Z. Wada

A double-loop four-Josephson-junction (4-JJ) flux qubit has an advantage over a three-Josephson-junction flux qubit in that the energy gap Δ at the symmetry point can be controlled in situ by varying the magnetic flux in one of the two loops. We report the results of a microwave spectroscopy measurement of a 4-JJ qubit. The magnetic fluxes in the two loops were controlled via a magnetic field and control flux. The excitation energy spectra at various values of control flux indicate the tunability of Δ via the control flux. Two branches of the excitation spectra were observed.

Journal of the Physical Society of Japan•Jun 10, 2009•7 citations

DOUBLE-LOOP JOSEPHSON-JUNCTION FLUX QUBIT WITH CONTROLLABLE ENERGY GAP

Yoshihiro Shimazu, Y. Saito, Z. Wada

A double-loop four-Josephson-junction (4-JJ) flux qubit has an advantage over a three-Josephson-junction flux qubit in that the energy gap Δ at the degeneracy point can be controlled in situ by varying the magnetic flux in one of the two loops. We report the results of microwave spectroscopy and ground-state measurements of a 4-JJ qubit. The value of Δ is estimated from the resonances due to one-photon and two-photon processes. The appearance of a qubit step on a two-dimensional flux map is in agreement with the theoretical prediction. The dependence of the maximum slope of the qubit step on the control flux indicates the tunability of the barrier height.

Foundations of Quantum Mechanics in the Light of New Technology•Jun 1, 2009•0 citations

Higher Josephson harmonics in a tunable double-junction transmon qubit

Ksenia Shagalov, David Feldstein-Bofill, Leo Uhre Jakobsen +11 more

Tunable Josephson harmonics open new avenues for qubit design. We demonstrate a superconducting circuit element consisting of a tunnel junction in series with a SQUID loop, yielding a Josephson potential whose harmonic content is strongly tunable by magnetic flux. Through spectroscopy of the first four qubit transitions, together with an effective single-mode model renormalized by the internal mode, we resolve a second harmonic with an amplitude up to $\sim10\%$ of the fundamental. We identify a flux sweet spot where the dispersive shift vanishes, achieved by balancing the dispersive couplings to the internal and qubit modes. This highly tunable element provides a route toward protected qubits and customizable nonlinear microwave devices.

quant-pharXiv:2512.08470•Physical Review Letters•Dec 10, 2025•6 citations

Characterization of a Double-Loop Four-Josephson-Junction Flux Qubit with Controllable Energy Gap

Yoshihiro Shimazu, Y. Saito, Z. Wada

Superconducting qubits are employed for the practical implementation of scalable quantum information processors. Fault-tolerant quantum computation schemes using superconducting qubits is under intensive study. Among the various kinds of superconducting qubits, flux qubits have a significant advantage in that they can be made insensitive to randomly fluctuating charges in the substrate. Here, the characterization results of a double-loop four-Josephson-junction flux qubit is reported. By varying the magnetic flux in one of the two loops, the energy gap at the classical degeneracy point can be controlled in situ. The basic operation of the system is illustrated by the appearance of a qubit step on a two-dimensional flux map. The energy gap can be indirectly estimated from the shape of the qubit step. The dependence of the shape of the qubit step on the control flux, which is analyzed in terms of the step height and maximum slope, is in good agreement with the simulation results, thereby implicitly indicating that the energy gap is varied from almost zero, less than the thermal energy, to a value higher than 50 GHz. Spectroscopic measurements directly demonstrated the controllability of the energy gap. In addition, doublet splitting due to intercell tunneling was observed for the first time.

Book Publisher International (a part of SCIENCEDOMAIN International)•Aug 19, 2024•0 citations

Four-Josephson-junction flux qubit with controllable energy gap

Yoshihiro Shimazu, Y. Saito, Z. Wada

We report the measurements of a double-loop four-Josephson-junction flux qubit. By varying the magnetic flux in one of the two loops, the energy gap at the classical degeneracy point can be controlled in situ. The basic operation of the system is illustrated by the appearance of a qubit step on a two-dimensional flux map. The energy gap can be indirectly estimated from the shape of the qubit step. The dependence of the shape of the qubit step on the control flux, which is analyzed in terms of the step height and maximum slope, is in good agreement with the simulation results, thereby implicitly indicating that the energy gap is varied from almost zero, less than the thermal energy, to a value higher than 50 GHz.

Journal of Physics Conference Series•Feb 1, 2009•3 citations

QUANTUM CLASSICAL CROSSOVER WITH SUPERCONDUCTING RING

Hirotaka Tanaka, Shiro Saito, Hideaki Takayanagi

We investigated the quantum classical crossover of magnetization at a superconducting ring with three Josephson junctions. The magnetization dependence of the ring can be varied against external magnetic flux through control of the Josephson energy potential. The magnetization of the ring is determined by the wavefunction in a double well potential described by phases across the Josephson junctions. The magnetization, which is quantized as up or down, corresponds to the state with the wavefunction localized on either side of the well. The magnetized state of the superconductor ring is measured with a DC-SQUID (Superconducting QUantum Interference Device), which is a highly sensitive flux detector. The ring in a classical regime exhibits complete up or down magnetization, while the ring in a quantum regime changes gradually from the up to the down state implying the existence of quantum superposition. The quantum classical boundary is exploited by controlling the energy barrier between the two wells in the Josephson energy potential. The quantum superposition of the ring means that this ring in the quantum region can be used as a flux quantum bit (qubit), which is a fundamental unit of a quantum computer.

International Symposium on Mesoscopic Superconductivity and Spintronics (MS+S)•Mar 1, 2003•2 citations
A double-loop four-Josephson-junction (4-JJ) flux qubit is a tunable qubit wherein the potential profile can be varied in situ via two applied magnetic fluxes. This provides a high level of control over state transitions. Here, we report the results of spectroscopic measurements on this system. We observed microwave resonances associated with the first and second excited states. A branch of resonances that is most likely attributable to the third excited state was also observed. The excitation energy spectra for these levels were in qualitative agreement with the results of simplified calculations performed using an effective Hamiltonian with two phases. The three lowest levels characterized in this study may allow novel applications, including those proposed theoretically in the past. Our analysis showed that the potential exhibited a crossover from the commonly used double-well regime to the novel single-well regime. This indicates the possibility of manipulation and readout of a 3-JJ (and 4-JJ) qubit in the single-well regime using a simple technique.
A double-loop four-Josephson-junction (4-JJ) flux qubit has an advantage over a three-Josephson-junction flux qubit in that the energy gap Δ at the symmetry point can be controlled in situ by varying the magnetic flux in one of the two loops. We report the results of a microwave spectroscopy measurement of a 4-JJ qubit. The magnetic fluxes in the two loops were controlled via a magnetic field and control flux. The excitation energy spectra at various values of control flux indicate the tunability of Δ via the control flux. Two branches of the excitation spectra were observed.
A double-loop four-Josephson-junction (4-JJ) flux qubit has an advantage over a three-Josephson-junction flux qubit in that the energy gap Δ at the degeneracy point can be controlled in situ by varying the magnetic flux in one of the two loops. We report the results of microwave spectroscopy and ground-state measurements of a 4-JJ qubit. The value of Δ is estimated from the resonances due to one-photon and two-photon processes. The appearance of a qubit step on a two-dimensional flux map is in agreement with the theoretical prediction. The dependence of the maximum slope of the qubit step on the control flux indicates the tunability of the barrier height.
Tunable Josephson harmonics open new avenues for qubit design. We demonstrate a superconducting circuit element consisting of a tunnel junction in series with a SQUID loop, yielding a Josephson potential whose harmonic content is strongly tunable by magnetic flux. Through spectroscopy of the first four qubit transitions, together with an effective single-mode model renormalized by the internal mode, we resolve a second harmonic with an amplitude up to ∼10%\sim10\%∼10% of the fundamental. We identify a flux sweet spot where the dispersive shift vanishes, achieved by balancing the dispersive couplings to the internal and qubit modes. This highly tunable element provides a route toward protected qubits and customizable nonlinear microwave devices.
Superconducting qubits are employed for the practical implementation of scalable quantum information processors. Fault-tolerant quantum computation schemes using superconducting qubits is under intensive study. Among the various kinds of superconducting qubits, flux qubits have a significant advantage in that they can be made insensitive to randomly fluctuating charges in the substrate. Here, the characterization results of a double-loop four-Josephson-junction flux qubit is reported. By varying the magnetic flux in one of the two loops, the energy gap at the classical degeneracy point can be controlled in situ. The basic operation of the system is illustrated by the appearance of a qubit step on a two-dimensional flux map. The energy gap can be indirectly estimated from the shape of the qubit step. The dependence of the shape of the qubit step on the control flux, which is analyzed in terms of the step height and maximum slope, is in good agreement with the simulation results, thereby implicitly indicating that the energy gap is varied from almost zero, less than the thermal energy, to a value higher than 50 GHz. Spectroscopic measurements directly demonstrated the controllability of the energy gap. In addition, doublet splitting due to intercell tunneling was observed for the first time.
We report the measurements of a double-loop four-Josephson-junction flux qubit. By varying the magnetic flux in one of the two loops, the energy gap at the classical degeneracy point can be controlled in situ. The basic operation of the system is illustrated by the appearance of a qubit step on a two-dimensional flux map. The energy gap can be indirectly estimated from the shape of the qubit step. The dependence of the shape of the qubit step on the control flux, which is analyzed in terms of the step height and maximum slope, is in good agreement with the simulation results, thereby implicitly indicating that the energy gap is varied from almost zero, less than the thermal energy, to a value higher than 50 GHz.
We investigated the quantum classical crossover of magnetization at a superconducting ring with three Josephson junctions. The magnetization dependence of the ring can be varied against external magnetic flux through control of the Josephson energy potential. The magnetization of the ring is determined by the wavefunction in a double well potential described by phases across the Josephson junctions. The magnetization, which is quantized as up or down, corresponds to the state with the wavefunction localized on either side of the well. The magnetized state of the superconductor ring is measured with a DC-SQUID (Superconducting QUantum Interference Device), which is a highly sensitive flux detector. The ring in a classical regime exhibits complete up or down magnetization, while the ring in a quantum regime changes gradually from the up to the down state implying the existence of quantum superposition. The quantum classical boundary is exploited by controlling the energy barrier between the two wells in the Josephson energy potential. The quantum superposition of the ring means that this ring in the quantum region can be used as a flux quantum bit (qubit), which is a fundamental unit of a quantum computer.