Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1012.2376 · Physical Review Letters

Microwave Guiding of Electrons on a Chip

Johannes Hoffrogge, R. Fröhlich, Mark A. Kasevich, Peter Hommelhoff

Published May 9, 2011• 36 citations
arXivHTMLPDF

Abstract

We demonstrate the transverse confinement and guiding of a low energy electron beam of several electron volts in a miniaturized linear quadrupole guide. The guiding potential is generated by applying a microwave voltage to electrodes fabricated on a planar substrate, which allows the potential landscape to be precisely shaped on a microscopic scale. We realize transverse trapping frequencies of 100 MHz and guide electrons along a circular section of 37 mm length. A detailed characterization of the guiding properties in terms of potential depth and dynamic stability is given. This new technique of electron guiding promises various applications in guided matter-wave experiments such as electron interferometry.

DOI
10.1103/physrevlett.106.193001

Related papers

A surface-electrode quadrupole guide for electrons

Johannes Hoffrogge

This thesis reports on the design and first experimental realization of a surface-electrode quadrupole guide for free electrons. The guide is based on a miniaturized, planar electrode layout and is driven at microwave frequencies. It confines electrons in the near-field of the microwave excitation, where strong electric field gradients can be generated without resorting to resonating structures or exceptionally high drive powers. The use of chip-based electrode geometries allows the realization of versatile, microstructured potentials with the perspective of novel quantum experiments with guided electrons. I present the design, construction and operation of an experiment that demonstrates electron confinement in a planar quadrupole guide for the first time. To this end, electrons with kinetic energies from one to ten electron-volts are guided along a curved electrode geometry. The stability of electron guiding as a function of drive parameters and electron energy has been studied. A comparison with numerical particle tracking simulations yields good qualitative agreement and provides a deeper understanding of the electron dynamics in the guiding potential. Furthermore, this thesis gives a detailed description of the design of the surface-electrode layout. This includes the development of an optimized coupling structure to inject electrons into the guide with minimum transverse excitation. I also discuss the extension of the current setup to longitudinal guide dimensions that are comparable to or larger than the wavelength of the drive signal. This is possible with a modified electrode layout featuring elevated signal conductors. Electron guiding in the field of a planar, microfabricated electrode layout allows the generation of versatile and finely structured guiding potentials. One example would be the realization of junctions that split and recombine a guided electron beam. Furthermore, it should be possible to prepare electrons in low-lying quantum mechanical oscillator states of the transverse guiding potential by matching an incoming electron beam to the wave functions of these states.

•Jan 1, 2012•1 citation

Towards a new quantum system: Electron guiding in a microwave potential

J. M. Hammer, Johannes Hoffrogge, Roman Fröhlich +1 more

We investigate a miniaturized planar ac-quadrupole guide (linear Paul trap) to confine electrons transversely and guide them longitudinally along microwave electrodes on a microfabricated chip. In combination with a single-atom tip electron emitter, which has been shown to be a perfect point source of electrons, we are aiming at direct injection of electrons into the quantum mechanical ground state of the transverse trapping potential (without the need for cooling). The quantum mechanical states of the transverse harmonic potential could be used as carrier of quantum information in a wholly new quantum device.

International Vacuum Nanoelectronics Conference•Jan 1, 2011•0 citations

Microwave Chip-Based Beam Splitter for Low-Energy Guided Electrons

Jakob Hammer, Sebastian Thomas, Philipp Weber +1 more

We present a novel beam splitter for low-energy electrons using a micro-structured guiding potential created above the surface of a planar microwave chip. Beam splitting arises from smoothly transforming the transverse guiding potential for an electron beam from a single-well harmonic confinement into a double well, thereby generating two separated output beams with 5 mm lateral spacing. Efficient beam splitting is observed for electron kinetic energies up to 3 eV, in excellent agreement with particle tracking simulations. We discuss prospects of this novel beam splitter approach for electron-based quantum matter-wave optics experiments.

arXiv:1408.2658•Physical Review Letters•Jun 23, 2015•23 citations

Phase-Resolved Electron Guiding in Optimized Chip-Based Microwave Potentials

Jakob Hammer, Johannes Hoffrogge, Stephan Heinrich +1 more

Fine control of coherent electron beams is required for experimental progress in quantum optics and electron microscopy, and chip-based technology permits interfacing of various components needed for e.g. quantum information processing. The authors provide a strategy for direct injection of electrons into low-lying motional quantum states of a linear electron guide, an important step toward guided matter-wave interferometry.

Physical Review Applied•Oct 27, 2014•8 citations

Miniaturized microwave Paul traps for electron guiding

Johannes Hoffrogge, Peter Hommelhoff

The paper presents the numerical modelling results and first experimental steps on an experiment aiming at guiding electrons in an AC quadrupole guide. In the proposed setup, electrons originating from a sharp tungsten field emission source is focused by means of a suitable electron-lens system into a linear Paul-trap operating at microwave frequencies. The control over the electrons' motional degrees of freedom gained in this way would allow e.g. for interference experiments with guided electrons or the deterministic interaction of two counterpropagating electrons.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2009•1 citation

Ferromagnets for integrated atom optics

Mukund Vengalattore, Richard Conroy, Wilbert Rooijakkers +1 more

A ferromagnetic atom chip for trapping neutral atoms above a substrate is fabricated and characterized. The chip is capable of generating an anisotropic quadrupole trap with gradients in excess of 15 kG/cm at a distance of more than 100 μm from the surface. This is a promising route to the study of ultracold low dimensional systems, interferometry, and atom optics which require tight confinement, while alleviating the problems of fragmentation seen in wire-based chips.

Journal of Applied Physics•Mar 25, 2004•15 citations
We demonstrate the transverse confinement and guiding of a low energy electron beam of several electron volts in a miniaturized linear quadrupole guide. The guiding potential is generated by applying a microwave voltage to electrodes fabricated on a planar substrate, which allows the potential landscape to be precisely shaped on a microscopic scale. We realize transverse trapping frequencies of 100 MHz and guide electrons along a circular section of 37 mm length. A detailed characterization of the guiding properties in terms of potential depth and dynamic stability is given. This new technique of electron guiding promises various applications in guided matter-wave experiments such as electron interferometry.
This thesis reports on the design and first experimental realization of a surface-electrode quadrupole guide for free electrons. The guide is based on a miniaturized, planar electrode layout and is driven at microwave frequencies. It confines electrons in the near-field of the microwave excitation, where strong electric field gradients can be generated without resorting to resonating structures or exceptionally high drive powers. The use of chip-based electrode geometries allows the realization of versatile, microstructured potentials with the perspective of novel quantum experiments with guided electrons. I present the design, construction and operation of an experiment that demonstrates electron confinement in a planar quadrupole guide for the first time. To this end, electrons with kinetic energies from one to ten electron-volts are guided along a curved electrode geometry. The stability of electron guiding as a function of drive parameters and electron energy has been studied. A comparison with numerical particle tracking simulations yields good qualitative agreement and provides a deeper understanding of the electron dynamics in the guiding potential. Furthermore, this thesis gives a detailed description of the design of the surface-electrode layout. This includes the development of an optimized coupling structure to inject electrons into the guide with minimum transverse excitation. I also discuss the extension of the current setup to longitudinal guide dimensions that are comparable to or larger than the wavelength of the drive signal. This is possible with a modified electrode layout featuring elevated signal conductors. Electron guiding in the field of a planar, microfabricated electrode layout allows the generation of versatile and finely structured guiding potentials. One example would be the realization of junctions that split and recombine a guided electron beam. Furthermore, it should be possible to prepare electrons in low-lying quantum mechanical oscillator states of the transverse guiding potential by matching an incoming electron beam to the wave functions of these states.
We investigate a miniaturized planar ac-quadrupole guide (linear Paul trap) to confine electrons transversely and guide them longitudinally along microwave electrodes on a microfabricated chip. In combination with a single-atom tip electron emitter, which has been shown to be a perfect point source of electrons, we are aiming at direct injection of electrons into the quantum mechanical ground state of the transverse trapping potential (without the need for cooling). The quantum mechanical states of the transverse harmonic potential could be used as carrier of quantum information in a wholly new quantum device.
We present a novel beam splitter for low-energy electrons using a micro-structured guiding potential created above the surface of a planar microwave chip. Beam splitting arises from smoothly transforming the transverse guiding potential for an electron beam from a single-well harmonic confinement into a double well, thereby generating two separated output beams with 5 mm lateral spacing. Efficient beam splitting is observed for electron kinetic energies up to 3 eV, in excellent agreement with particle tracking simulations. We discuss prospects of this novel beam splitter approach for electron-based quantum matter-wave optics experiments.
The paper presents the numerical modelling results and first experimental steps on an experiment aiming at guiding electrons in an AC quadrupole guide. In the proposed setup, electrons originating from a sharp tungsten field emission source is focused by means of a suitable electron-lens system into a linear Paul-trap operating at microwave frequencies. The control over the electrons' motional degrees of freedom gained in this way would allow e.g. for interference experiments with guided electrons or the deterministic interaction of two counterpropagating electrons.