Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1010.5211 · Journal of Physics B Atomic Molecular and Optical Physics

Optimized control of quantum state transfer from noisy to quiet qubits

Bruno M. Escher, Guy Bensky, J Clausen, Gershon Kurizki

Published Jul 25, 2011• 23 citations
arXivHTMLPDF

Abstract

Existing optimal control methods of open quantum systems rely on extensive numerical simulations of the dynamics in the presence of a bath, or alternatively ignore the exact bath dynamics. If the bath effects are to be treated properly on both Markovian and non-Markovian timescales using numerical simulations, the number of bath modes cannot be large. This may affect the ability to simulate realistic scenarios. Even if realistic, such simulations are hard to interpret physically. An alternative approach advocated here is to resort to a perturbative analysis provided the system–bath coupling is weak. This analysis would allow for the effects of any given bath (finite or infinite, Markovian or non-Markovian) and any control at our disposal. This poses the challenge of constructing a method for the optimization of various operations requiring proper manipulation of the system, based on a general perturbative treatment to second order in the system–bath coupling. This proposed treatment yields a universal tool for optimizing the fidelity of a given operation. It involves a fidelity-control matrix: a construct that allows us to prioritize the use of available control resources so as to maximize the operation fidelity in any given bath. As an analytically solvable example of this general method, we analyse quantum state-transfer optimization, from a ‘noisy’ (write-in) qubit to its ‘quiet’ counterpart (storage qubit). Intriguing interplay is revealed between our ability to avoid bath-induced errors that profoundly depend on the bath-memory time and the limitations imposed by leakage out of the operational subspace. Counterintuitively, under no circumstances is the fastest transfer optimal (for a given transfer energy).

DOI
10.1088/0953-4075/44/15/154015

Related papers

Task-optimized control of open quantum systems

Jens Clausen, Guy Bensky, Gershon Kurizki

We develop a general optimization strategy for performing a chosen unitary or nonunitary task on an open quantum system. The goal is to design a controlled time-dependent system Hamiltonian by variationally minimizing or maximizing a chosen function of the system state, which quantifies the task success (score), such as fidelity, purity, or entanglement. If the time dependence of the system Hamiltonian is fast enough to be comparable to or shorter than the response time of the bath, then the resulting non-Markovian dynamics is shown to optimize the chosen task score to second order in the coupling to the bath. This strategy can protect a desired unitary system evolution from bath-induced decoherence, but can also take advantage of the system-bath coupling so as to realize a desired nonunitary effect on the system.

arXiv:1111.2847•Physical Review A•May 9, 2012•24 citations

Optimal control for non-Markovian open quantum systems

Bin Hwang, Hsi‐Sheng Goan

An efficient optimal-control theory based on the Krotov method is introduced for a non-Markovian open quantum system with a time-nonlocal master equation in which the control parameter and the bath correlation function are correlated. This optimal-control method is developed via a quantum dissipation formulation that transforms the time-nonlocal master equation to a set of coupled linear time-local equations of motion in an extended auxiliary Liouville space. As an illustration, the optimal-control method is applied to find the control sequences for high-fidelity $Z$ gates and identity gates of a qubit embedded in a non-Markovian bath. $Z$ gates and identity gates with errors less than ${10}^{\ensuremath{-}5}$ for a wide range of bath decoherence parameters can be achieved for the non-Markovian open qubit system with control over only the ${\ensuremath{\sigma}}_{z}$ term. The control-dissipation correlation and the memory effect of the bath are crucial in achieving the high-fidelity gates.

arXiv:1203.6128•Physical Review A•Mar 19, 2012•60 citations

Universal Dynamical Control of Open Quantum Systems

Gershon Kurizki

Due to increasing demands on speed and security of data processing, along with requirements on measurement precision in fundamental research, quantum phenomena are expected to play an increasing role in future technologies. Special attention must hence be paid to omnipresent decoherence effects, which hamper quantumness. Their consequence is always a deviation of the quantum state evolution (error) with respect to the expected unitary evolution if these effects are absent. In operational tasks such as the preparation, transformation, transmission, and detection of quantum states, these effects are detrimental and must be suppressed by strategies known as dynamical decoupling, or the more general dynamical control by modulation developed by us. The underlying dynamics must be Zeno-like, yielding suppressed coupling to the bath. There are, however, tasks which cannot be implemented by unitary evolution, in particular those involving a change of the system’s state entropy. Such tasks necessitate efficient coupling to a bath for their implementation. Examples include the use of measurements to cool (purify) a system, to equilibrate it, or to harvest and convert energy from the environment. If the underlying dynamics is anti-Zeno like, enhancement of this coupling to the bath will occur and thereby facilitate the task, as discovered by us. A general task may also require state and energy transfer, or entanglement of noninteracting parties via shared modes of the bath which call for maximizing the shared (two-partite) couplings with the bath, but suppressing the single-partite couplings. For such tasks, a more subtle interplay of Zeno and anti-Zeno dynamics may be optimal. We have therefore constructed a general framework for optimizing the way a system interacts with its environment to achieve a desired task. This optimization consists in adjusting a given “score” that quantifies the success of the task, such as the targeted fidelity, purity, entropy, entanglement, or energy by dynamical modification of the system-bath coupling spectrum on demand.

ISRN Optics•Sep 19, 2013•7 citations

Optimal control of open-quantum-system dynamics predicted by long short-term memory

Jun-Dong Zhong, Zhao-Ming Wang

The realization of high-fidelity quantum control is crucial for quantum information processing, particularly in noisy environments where control strategies must simultaneously achieve precise manipulation and effective noise suppression. Conventional optimal control designs typically require numerical calculations of the system dynamics. Recent studies have demonstrated that long short-term memory neural networks (LSTM) can accurately predict the time evolution of open quantum systems. Based on LSTM predicted dynamics, we propose an optimal control framework for rapid and efficient optimal control design in open quantum systems. As illustrative examples, we apply the proposed framework to design optimal control for adiabatic speedup in a two-level system and for quantum state transfer in a spin chain, both under non-Markovian environments. For adiabatic speedup, our optimization procedure involves two steps: driving trajectory optimization and zero-area pulse optimization. Fidelity improvements for both steps have been obtained, demonstrating the effectiveness of the scheme. Furthermore, this effectiveness is validated for quantum state transfer in a spin chain, which is a high dimensional control problem. Our optimal control design scheme utilizes predicted dynamics to generate optimized controls, offering broad application potential in quantum computing, communication, and sensing.

quant-pharXiv:2602.04480•Physical Review A•Feb 5, 2026•0 citations

Optimized dynamical control of state transfer through noisy spin chains

Analía Zwick, Gonzalo A. Álvarez, Guy Bensky +1 more

We propose a method of optimally controlling the tradeoff of speed and fidelity of state transfer through a noisy quantum channel (spin-chain). This process is treated as qubit state-transfer through a fermionic bath. We show that dynamical modulation of the boundary-qubits levels can ensure state transfer with the best tradeoff of speed and fidelity. This is achievable by dynamically optimizing the transmission spectrum of the channel. The resulting optimal control is robust against both static and fluctuating noise in the channelʼs spin–spin couplings. It may also facilitate transfer in the presence of diagonal disorder (on site energy noise) in the channel.

arXiv:1310.1621•New Journal of Physics•Jun 26, 2014•53 citations

Robust quantum optimal control for Markovian quantum systems

Ran Liu, Xiaodong Yang, Jun Li

Resisting diverse noise effects is crucial for the accurate manipulation of quantum systems. For static or slowly varying noises, many efficient noise mitigation strategies have been developed, such as composite pulses and dynamical decoupling. However, for fast fluctuating noise in the Markovian limit, whether and to what extent coherent quantum control can enhance quantum engineering tasks remains unclear and less explored. Here, we propose a robust quantum optimal control method to tackle Markovian noises. The basic idea is that, regarding the Markovian noise channel as perturbation, we quantitatively characterize the noise-induced error evolution by the perturbative expansion term, and then take them as the objective functions to be suppressed. During optimization, the optimal controls are obtained by maximizing the control target function and meanwhile minimizing the perturbative terms due to Markovian noise order by order. As demonstration examples, we first apply our method to quantum state transfer tasks on two-level and three-level $\mathrm{\ensuremath{\Lambda}}$ systems, then use it to design quantum gates in two-level and three-level ladder systems, all under Markovian noises. The simulation results illustrate that our method can notably enhance quantum state transfer fidelities and have very limited improvement on gate fidelities. The method presented here is versatile and can be extended to enhance the performance of various control tasks under Markovian noise in multilevel or multiqubit quantum systems.

Physical Review A•Jul 1, 2024•4 citations
Existing optimal control methods of open quantum systems rely on extensive numerical simulations of the dynamics in the presence of a bath, or alternatively ignore the exact bath dynamics. If the bath effects are to be treated properly on both Markovian and non-Markovian timescales using numerical simulations, the number of bath modes cannot be large. This may affect the ability to simulate realistic scenarios. Even if realistic, such simulations are hard to interpret physically. An alternative approach advocated here is to resort to a perturbative analysis provided the system–bath coupling is weak. This analysis would allow for the effects of any given bath (finite or infinite, Markovian or non-Markovian) and any control at our disposal. This poses the challenge of constructing a method for the optimization of various operations requiring proper manipulation of the system, based on a general perturbative treatment to second order in the system–bath coupling. This proposed treatment yields a universal tool for optimizing the fidelity of a given operation. It involves a fidelity-control matrix: a construct that allows us to prioritize the use of available control resources so as to maximize the operation fidelity in any given bath. As an analytically solvable example of this general method, we analyse quantum state-transfer optimization, from a ‘noisy’ (write-in) qubit to its ‘quiet’ counterpart (storage qubit). Intriguing interplay is revealed between our ability to avoid bath-induced errors that profoundly depend on the bath-memory time and the limitations imposed by leakage out of the operational subspace. Counterintuitively, under no circumstances is the fastest transfer optimal (for a given transfer energy).
We develop a general optimization strategy for performing a chosen unitary or nonunitary task on an open quantum system. The goal is to design a controlled time-dependent system Hamiltonian by variationally minimizing or maximizing a chosen function of the system state, which quantifies the task success (score), such as fidelity, purity, or entanglement. If the time dependence of the system Hamiltonian is fast enough to be comparable to or shorter than the response time of the bath, then the resulting non-Markovian dynamics is shown to optimize the chosen task score to second order in the coupling to the bath. This strategy can protect a desired unitary system evolution from bath-induced decoherence, but can also take advantage of the system-bath coupling so as to realize a desired nonunitary effect on the system.
An efficient optimal-control theory based on the Krotov method is introduced for a non-Markovian open quantum system with a time-nonlocal master equation in which the control parameter and the bath correlation function are correlated. This optimal-control method is developed via a quantum dissipation formulation that transforms the time-nonlocal master equation to a set of coupled linear time-local equations of motion in an extended auxiliary Liouville space. As an illustration, the optimal-control method is applied to find the control sequences for high-fidelity ZZZ gates and identity gates of a qubit embedded in a non-Markovian bath. ZZZ gates and identity gates with errors less than ${10}^{\ensuremath{-}5}$ for a wide range of bath decoherence parameters can be achieved for the non-Markovian open qubit system with control over only the ${\ensuremath{\sigma}}_{z}$ term. The control-dissipation correlation and the memory effect of the bath are crucial in achieving the high-fidelity gates.
Due to increasing demands on speed and security of data processing, along with requirements on measurement precision in fundamental research, quantum phenomena are expected to play an increasing role in future technologies. Special attention must hence be paid to omnipresent decoherence effects, which hamper quantumness. Their consequence is always a deviation of the quantum state evolution (error) with respect to the expected unitary evolution if these effects are absent. In operational tasks such as the preparation, transformation, transmission, and detection of quantum states, these effects are detrimental and must be suppressed by strategies known as dynamical decoupling, or the more general dynamical control by modulation developed by us. The underlying dynamics must be Zeno-like, yielding suppressed coupling to the bath. There are, however, tasks which cannot be implemented by unitary evolution, in particular those involving a change of the system’s state entropy. Such tasks necessitate efficient coupling to a bath for their implementation. Examples include the use of measurements to cool (purify) a system, to equilibrate it, or to harvest and convert energy from the environment. If the underlying dynamics is anti-Zeno like, enhancement of this coupling to the bath will occur and thereby facilitate the task, as discovered by us. A general task may also require state and energy transfer, or entanglement of noninteracting parties via shared modes of the bath which call for maximizing the shared (two-partite) couplings with the bath, but suppressing the single-partite couplings. For such tasks, a more subtle interplay of Zeno and anti-Zeno dynamics may be optimal. We have therefore constructed a general framework for optimizing the way a system interacts with its environment to achieve a desired task. This optimization consists in adjusting a given “score” that quantifies the success of the task, such as the targeted fidelity, purity, entropy, entanglement, or energy by dynamical modification of the system-bath coupling spectrum on demand.
The realization of high-fidelity quantum control is crucial for quantum information processing, particularly in noisy environments where control strategies must simultaneously achieve precise manipulation and effective noise suppression. Conventional optimal control designs typically require numerical calculations of the system dynamics. Recent studies have demonstrated that long short-term memory neural networks (LSTM) can accurately predict the time evolution of open quantum systems. Based on LSTM predicted dynamics, we propose an optimal control framework for rapid and efficient optimal control design in open quantum systems. As illustrative examples, we apply the proposed framework to design optimal control for adiabatic speedup in a two-level system and for quantum state transfer in a spin chain, both under non-Markovian environments. For adiabatic speedup, our optimization procedure involves two steps: driving trajectory optimization and zero-area pulse optimization. Fidelity improvements for both steps have been obtained, demonstrating the effectiveness of the scheme. Furthermore, this effectiveness is validated for quantum state transfer in a spin chain, which is a high dimensional control problem. Our optimal control design scheme utilizes predicted dynamics to generate optimized controls, offering broad application potential in quantum computing, communication, and sensing.
We propose a method of optimally controlling the tradeoff of speed and fidelity of state transfer through a noisy quantum channel (spin-chain). This process is treated as qubit state-transfer through a fermionic bath. We show that dynamical modulation of the boundary-qubits levels can ensure state transfer with the best tradeoff of speed and fidelity. This is achievable by dynamically optimizing the transmission spectrum of the channel. The resulting optimal control is robust against both static and fluctuating noise in the channelʼs spin–spin couplings. It may also facilitate transfer in the presence of diagonal disorder (on site energy noise) in the channel.
Resisting diverse noise effects is crucial for the accurate manipulation of quantum systems. For static or slowly varying noises, many efficient noise mitigation strategies have been developed, such as composite pulses and dynamical decoupling. However, for fast fluctuating noise in the Markovian limit, whether and to what extent coherent quantum control can enhance quantum engineering tasks remains unclear and less explored. Here, we propose a robust quantum optimal control method to tackle Markovian noises. The basic idea is that, regarding the Markovian noise channel as perturbation, we quantitatively characterize the noise-induced error evolution by the perturbative expansion term, and then take them as the objective functions to be suppressed. During optimization, the optimal controls are obtained by maximizing the control target function and meanwhile minimizing the perturbative terms due to Markovian noise order by order. As demonstration examples, we first apply our method to quantum state transfer tasks on two-level and three-level $\mathrm{\ensuremath{\Lambda}}$ systems, then use it to design quantum gates in two-level and three-level ladder systems, all under Markovian noises. The simulation results illustrate that our method can notably enhance quantum state transfer fidelities and have very limited improvement on gate fidelities. The method presented here is versatile and can be extended to enhance the performance of various control tasks under Markovian noise in multilevel or multiqubit quantum systems.