We propose to turn two resonant distant cavities effectively into one by coupling them via an optical fiber which is coated with two-level atoms [J. D. Franson et al., Phys. Rev. A 70, 062302 (2004)]. The purpose of the atoms is to destructively measure the evanescent electric field of the fiber on a time scale which is long compared to the time it takes a photon to travel from one cavity to the other. Moreover, the boundary conditions imposed by the setup should support a small range of standing waves inside the fiber, including one at the frequency of the cavities. In this way, the fiber provides an additional decay channel for one common cavity field mode but not for the other. If the corresponding decay rate is sufficiently large, this mode decouples effectively from the system dynamics. A single nonlocal resonator mode is created.
We propose to turn two resonant distant cavities effectively into one by coupling them via an optical fiber which is coated with two-level atoms [J. D. Franson et al., Phys. Rev. A 70, 062302 (2004)]. The purpose of the atoms is to destructively measure the evanescent electric field of the fiber on a time scale which is long compared to the time it takes a photon to travel from one cavity to the other. Moreover, the boundary conditions imposed by the setup should support a small range of standing waves inside the fiber, including one at the frequency of the cavities. In this way, the fiber provides an additional decay channel for one common cavity field mode but not for the other. If the corresponding decay rate is sufficiently large, this mode decouples effectively from the system dynamics. A single nonlocal resonator mode is created.
In this work I present the experimental realization of a versatile platform for the interplay between light and matter at the single-quanta level. In particular, I demonstrate the high cooperativity of small ensembles of rubidium atoms strongly coupled to a state-of-the-art, open fiber-based microcavity, emphasizing the capabilities of the system as an efficient source and storage device for single photons. The first part of this thesis focusses on the construction and characterization of the microresonator, which is composed of two dielectric mirrors machined on the end-facets of optical glass fibers. Through the implementation of an in-house facility, a large number of fiber-based mirrors are manufactured and precisely characterized. I present a theoretical model that explains, for the first time, the asymmetry in their reflective line shape and that has important implications for the optimal alignment of fiber-based cavities. In the following chapter, I introduce the main experimental apparatus, which contains a miniaturized fiber cavity -- with small mode volume and a linewidth of k≈2(pi)x25 MHz -- that is actively stabilized and integrated in a compact assembly. The monolithic structure features several high-numerical aperture (NA) lenses that provide the necessary tools for the trapping, manipulation and high-resolution imaging of atoms inside the resonator. Neutral rubidium atoms are delivered by an optical conveyor belt from the cooling region into the cavity mode, where their presence is monitored by probing the cavity field. This allows us to perform real-time optical feedback in the transport scheme and to observe the characteristic vacuum Rabi splitting for individual atoms in a non-destructive manner. Due to the small mode volume of the microcavity, coupling strengths up to g=2(pi)x100 MHz are observed for single atoms, corresponding to light-matter interaction in the strong coupling regime. The system's cooperativity is collectively enhanced more than five times when placing a small atomic ensemble inside the resonator. Such a fast interaction rate and the high transmission of the input cavity mirror provide a rapid, non-destructive readout of the internal hyperfine state of a coupled atom, yielding fidelities of 99.8% in 5 ms with less than 1% population transfer and negligible atom losses. The last part of the thesis is dedicated to the study of the influence of the cavity on the emission properties of an atom. I show how, despite the small solid angle covered by the cavity mode, the resonator alters the radiation pattern of an externally pumped single atom and increases its emission rate by a factor of 15 due to the process known as cavity back-action. More than 90% of the emitted photons are collected by the single cavity-mode -- as a result of the strong Purcell enhancement -- and subsequently channeled out by one of the fiber mirrors. A characterization of the photon statistics of the cavity output shows a clear antibunching dip, confirming that the emission corresponds to a single quantum emitter and that our system can be used as a readily fiber-coupled, efficient single-photon source.
A single two-level emitter coupled to a single mode of an electromagnetic resonator constitutes the most fundamental instance of light--matter interaction. Realizations of this type of system are investigated in the field of cavity quantum electrodynamics (cavity QED). Particularly important are schemes in which the coupling is strong enough to exceed the spontaneous emission rate as well as cavity damping. In this case, the coherent exchange of excitation between source and photon is the dominating process, providing the unique possibility to deterministically control the quantum evolution of the system. Great progress has recently been accomplished, technologically as well as conceptually, and the focus section in this issue of Journal of Optics B: Quantum and Semiclassical Optics features five articles highlighting important recent developments in the field. Strong coupling between single atoms and the electromagnetic cavity field have been achieved in two distinct regimes, the optical and the microwave region. The latter is represented by the micromaser, a high-Q microwave cavity pumped by a beam of highly excited Rydberg atoms. It has proved to be an almost ideal system for the generation of non-classical field states. A constraint in these experiments is the fact that the field inside the cavity can only be examined indirectly, by analysing the occupation of atoms leaving the cavity. While only two atomic states were previously identified for this purpose, V A Reshetov shows in his article (pages 119--126) that more information on the field may be extracted by taking advantage of the Zeeman substructure of the atomic levels. In the optical domain of cavity QED, by contrast, the state of the resonator field may be probed directly by measuring the light leaking from the cavity using photodetectors. In order to minimize damping, high-quality cavities must be employed. In most optical experiments these are Fabry--Perot resonators with ultra-high reflectivity mirrors, with losses as low as a few parts per million being state of the art. At the same time, the coupling of atoms and photons is enhanced by reducing the length of the cavity, so that strong coupling conditions are reached. A very attractive application of this type of cavity QED setup is the possibility of exerting control over the quantum dynamics of the system. An impressive example is the implementation of quantum feedback, reported in the paper by W P Smith and L A Orozco (pages 127--134). Using information gained from detecting a single photon escaping from the cavity, active feedback is applied to halt the dynamical evolution of the system. This is the first time active feedback has been used to modify the quantum evolution of a system at the single-photon level. The authors discuss how detunings between the subsystems affect the quantum feedback, an issue particularly relevant for ensembles of atoms with a spread in detuning. Perfect quantum feedback in this case requires the use of additional parameters to control the system. The majority of optical cavity QED experiments performed so far have used as a medium atoms traversing the cavity on random trajectories, such as, for example, thermal atomic beams. In this case, the observation of quantum effects is degraded in two ways. The Doppler effect and the finite transit time lead to line broadening, while the spatial structure of the cavity mode results in atoms in different locations experiencing different coupling with the photonic field. J E Reiner et al (pages 135--142) investigate the impact of these effects on quantum fluctuations in their cavity QED system. In order to overcome line broadening, they have developed a continuous cold atomic beam, extracted from a magneto-optical trap. An even better control of broadening effects and fluctuating coupling strength is provided by trapping the atoms inside the cavity and cooling them to temperatures at which their position spread is smaller than the optical wavelength. Much recent activity has been devoted to developing such an ultimate cavity QED system. A Vukics et al (pages 143--153) present a theoretical proposal for dynamically trapping and cooling atoms inside a cavity. By driving the atoms with a standing wave injected from the side of the cavity and by weakly exciting the cavity field itself, they predict three-dimensional trapping of the atom for periods around 1 second, an extremely long time on the typical scale of cavity QED dynamics. The essential component of their scheme is the interference between the two driving fields, determining the temperature of the particle and the stable trapping positions. In the quest for better confinement of radiation, lately, an appealing alternative to the Fabry--Perot cavity has been investigated -- the optical microsphere resonator. A sphere with a diameter of a few tens of microns, it supports so-called whispering gallery modes near its circumference, for which quality factors up to 10 10 have been measured. In order to exploit the correspondingly low field damping rates for cavity QED, a method must be found to couple atomic or solid state emitters to these modes. S Göotzinger et al (pages 154--158) report the coupling of single nanocrystals on the surface of a microsphere through the evanescent field of the mode. Selective excitation of a single nano-emitter was accomplished with a scanning confocal microscope. The system is a promising candidate for cavity QED with single-quantum emitters. The ability to fully control the quantum dynamics of atoms and light is beginning to spawn early applications. The most notable example is quantum information processing. This requires the coherent manipulation of single-quantum systems, which is ideally provided by cavity QED interaction in the strong-coupling limit. The development of practical devices will be among the principal future tasks for research in the field. This will include physical systems, which have not been covered in this issue, such as semiconductors, quantum dots as emitters, or photonic crystals as resonator structures. Cavity QED is therefore guaranteed to remain a vigorous field in the years to come.
We investigate a two-way cascaded cavity QED system consisting of microtoroidal resonators coupled through an optical fiber. Each microtoroidal cavity supports two counterpropagating whispering-gallery modes coupled to single atoms through their evanescent fields. We focus on a pair of atom-microtoroid systems and compute the spectrum of spontaneous emission into the fiber with one atom initially excited. Explicit results are presented for strong-coupling and bad-cavity regimes, where the latter allows the effective atom-atom interaction to be controlled through the atom-cavity coupling and detuning: the atoms exhibit either collective spontaneous emission with no dipole-dipole interaction or a (coherent) dipole-dipole interaction and independent (single-atom) emission. This capacity for switching the character of the interaction is a feature of bidirectional coupling and connects our two-way cascaded system to work on one-dimensional waveguides. Building upon our bad-cavity results, we generalize to many atom-microtoroid systems coupled through an optical fiber.
In this study, we theoretically investigate a system composed of two isolated two-level atoms, each confined within an independent single-mode optical cavity. The cavities are coherently coupled via an optical fiber, enabling photon-mediated interaction between the two subsystems. Each cavity sustains a single-mode quantized electromagnetic field, and each atom couples exclusively to the field within its respective cavity. We analyze the time dependent entanglement dynamics, exploring both atom-atom and cavity-field bipartite entanglement under this hybrid interaction framework. To quantify entanglement, we employ concurrence as the measurement metric. The effects of the atoms' initial states and the optical fiber’s coupling strength on both atom-atom and field-field entanglement are analyzed. Numerical results reveal that when the coupling strength of the optical fiber is close to zero, no entanglement is observed between either the atoms or the fields. However, as the fiber coupling strength increases, entanglement emerges and exhibits collapse and revival behavior over time.
The interaction between identical two-level atoms with a system that consists of two coupled cavities connected by an optical fiber was investigated. With new bosonic operators, the interaction Hamiltonian between the fiber and the cavities can be diagonalized (Pellizzari's model1). In the strong coupling regime (cavity field-fiber), the interaction between atoms and the non-resonant normal modes can be eliminated, simplifying our system to that of one atom interacting with a single-mode cavity. For this interaction, we have analyzed the entanglement between distant atoms. We present two simple procedures to generate two atoms in a maximally entangled state, interacting (i) successively and (ii) simultaneously with the coupled cavities system.
When cavity photons couple to an optical fiber with a continuum of modes, they usually leak out within a finite amount of time. However, if the fiber is about 1 m long and linked to a mirror, photons bounce back and forth within the fiber on a much faster time scale. As a result, dynamical decoupling prevents the cavity photons from entering the fiber. In this paper, we use the simultaneous dynamical decoupling of a large number of distant cavities from the fiber modes of linear optics networks to mediate effective cavity–cavity interactions in a large variety of configurations. Coherent cavity networks with complete connectivity can be created with potential applications in quantum computing and in the simulation of the complex interaction Hamiltonians of biological systems.