Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1008.2129

Automated Error Correction For Generalized Bell States

Pratyush Pandey, Sriram Prasath E., Gupta, Manu, Prasanta Kumar Panigrahi

Published Aug 12, 2010• 3 citations
arXivHTMLPDF

Abstract

A procedure is developed to automatically correct the bit flip and the arbitrary phase change errors in Generalized Bell states (GBS). The phase and parity characteristics of the GBS are encoded in ancilla bits without altering the state under consideration. The same information is then used to correct the state at a different point, through appropriate unitrary control operations. It is also shown that the distributed/indirect measurements on ancilla can yield the error syndrome. The restricted error correction circuit obtained for N-qubit entangled states of the Bell type, are generalized for the corresponding higher dimensions, thus opening up the possibility of designing of task specific error correction circuits.

DOI
10.48550/arxiv.1008.2129

Related papers

Automated error correction in superdense coding, with implementation on superconducting quantum computer

Kumar Nilesh, Piyush Joshi, Prasanta Kumar Panigrahi

Construction of a fault-tolerant quantum computer remains a challenging problem due to unavoidable noise in quantum states and the fragility of quantum entanglement. However, most of the error-correcting codes increases the complexity of the algorithms, thereby decreasing any quantum advantage. Here we present a task-specific error-correction technique that provides a complete protection over a restricted set of quantum states. Specifically, we give an automated error correction in Superdense Coding algorithms utilizing n-qubit generalized Bell states. At its core, it is based on non-destructive discrimination method of Bell states involving measurements on ancilla qubits (phase and parity ancilla). The algorithm is shown to be distributable and can be distributed to any set of parties sharing orthogonal states. Automated refers to experimentally implementing the algorithm in a quantum computer by utilizing unitary operators with no measurements in between and thus without the need for outside intervention. We also experimentally realize our automated error correction technique for three different types of superdense coding algorithm on a 7-qubit superconducting IBM quantum computer and also on a 27-qubit quantum simulator in the presence of noise. Probability histograms are generated to show the high fidelity of our experimental results. Quantum state tomography is also carried out with the quantum computer to explicate the efficacy of our method.

arXiv:2210.15161•Oct 27, 2022•3 citations

Bell state discrimination and error correction

Manu Gupta, Abdul Q. Batin, Rajiuddin Sk +1 more

An ancilla-based single particle measurement scheme is illustrated for Bell state discrimination which does not lead to the collapse of the wave function.It enables the extraction of partial information, e.g., parity and phase independently, that generalizes to multi-particle entangled states of qubits, which also applied to qudits.It can be used for error correction in a quantum circuit architecture involving basic gates like Hadamard and Controlled-NOT.It helps unravel the syndrome operators and, what is more, in the multi-partite state that the individual constituents lack.

Asian Journal of Physics•Nov 1, 2024•0 citations

Significant improvement of fidelity for encoded quantum bell pairs at long and short-distance communication along with generalized circuit

Syed Emad Uddin Shubha, Md. Saifur Rahman, M. R. C. Mahdy

Quantum entanglement is a unique criterion of the quantum realm and an essential tool to secure quantum communication. Ensuring high-fidelity entanglement has always been a challenging task owing to interaction with the hostile channel environment created due to quantum noise and decoherence. Though several methods have been proposed, correcting almost all arbitrary errors is still a gigantic task. As one of the main contributions of this work, a new model for 'large distance communication' has been proposed, which may correct all bit flip errors or other errors quite extensively if proper encoding and subspace measurements are used. To achieve this purpose, at the very first step, the idea of differentiating the 'long-distance communication' and 'short-distance applications' has been introduced. Short-distance is determined by the maximum range of applying unitary control gates by the qubit technology. How the error correcting ability of Quantum codes change for short and long-distance application is investigated in this work, which was not explored in previous literatures as far as we know. At the beginning, we have applied stabilizer formalism and Repetition Code for decoding to distinguish the error correcting ability in long and short distance communication. Particularly for short-distance communication, it has been demonstrated that a 'properly encoded' bell state can identify all the bit flip, or phase flip errors with 100% accuracy theoretically. In contrast, if the bell states are used in long-distance communication, the error-detecting and correcting ability reduces at huge amounts. To increase the fidelity significantly and correct the errors quite extensively for long-distance communication, a new model based on classical communication protocol has been suggested. All the required circuits in these processes have been generalized for arbitrary (even) numbers of ancilla qubits during encoding. Proposed analytical results have also been verified with the Simulation results of IBM QISKIT QASM.

arXiv:2303.07425•Heliyon•Aug 31, 2023•1 citation

A Coding and Automatic Error-Correction Circuit Based on the Five-Particle Entangled State

Xi, Chen, Pei Pei +3 more

In this paper, we discuss the concepts of quantum coding and error correction for a five-particle entangled state. Error correction can correct bit-reverse or phase-flip errors of one and two quantum states and is no longer limited to only one quantum state. We encode a single quantum state into a five-particle entangled state before being transferred to the sender. We designed an automatic error-correction circuit to correct errors caused by noise. We also simplify the design process for a multiple quantum error-correction circuit. We compare error-correction schemes for five and three entangled particles in terms of efficiency and capabilities. The results show that error-correction efficiency and fidelity are improved.

ZTE communications•Jan 1, 2013•0 citations

Error correction and decoding for quantum stabilizer codes

Xiao Fang-ying, Hanwu Chen

Mapping the error syndromes to error operators is the core of quantum decoding network and the key step to realize quantum error correction. The definitions of the bit flip error syndrome matrix and the phase flip error syndrome matrix are presented, and then the error syndromes of Pauli errors are expressed in terms of the columns of the bit flip error syndrome matrix and the phase flip error syndrome matrix. It is also shown that the error syndrome matrix of a stabilizer code is determined by its check matrix, which is similar to the relationship between the classical error and the parity check matrix of classical codes. So, the techniques of error detection and error correction for classical linear codes can be applied to quantum stabilizer codes after some modifications. The error correction circuits are constructed based on the relationship between the error operator and error syndrom. The decoding circuit is constructed by reversing the encoding circuit because the encoding operators are unitary.

Acta Physica Sinica•Jan 1, 2011•3 citations

A Novel Approach for Asymmetric Quantum Error Correction With Syndrome Measurement

Swathi Mummadi, Bhawana Rudra

Most of the quantum error correction methods are symmetric. Symmetric methods are implemented by considering the amplitude of bit flip(X) and phase flip(Z) errors as same. With the quantum experiments, it is observed that the amplitude of Z errors are more compared to X errors. Due to which the need of asymmetric error correction has increased. This paved a path for the development of asymmetric error correction methods. In this paper, we discussed the concept of asymmetric quantum error correction (AQEC) and proposed an efficient approach for AQEC with encoding, syndrome measurement and decoding operations with increased fidelity to 85.89% and reduced circuit depth to 48%.

IEEE Access•Jan 1, 2022•22 citations
A procedure is developed to automatically correct the bit flip and the arbitrary phase change errors in Generalized Bell states (GBS). The phase and parity characteristics of the GBS are encoded in ancilla bits without altering the state under consideration. The same information is then used to correct the state at a different point, through appropriate unitrary control operations. It is also shown that the distributed/indirect measurements on ancilla can yield the error syndrome. The restricted error correction circuit obtained for N-qubit entangled states of the Bell type, are generalized for the corresponding higher dimensions, thus opening up the possibility of designing of task specific error correction circuits.
Construction of a fault-tolerant quantum computer remains a challenging problem due to unavoidable noise in quantum states and the fragility of quantum entanglement. However, most of the error-correcting codes increases the complexity of the algorithms, thereby decreasing any quantum advantage. Here we present a task-specific error-correction technique that provides a complete protection over a restricted set of quantum states. Specifically, we give an automated error correction in Superdense Coding algorithms utilizing n-qubit generalized Bell states. At its core, it is based on non-destructive discrimination method of Bell states involving measurements on ancilla qubits (phase and parity ancilla). The algorithm is shown to be distributable and can be distributed to any set of parties sharing orthogonal states. Automated refers to experimentally implementing the algorithm in a quantum computer by utilizing unitary operators with no measurements in between and thus without the need for outside intervention. We also experimentally realize our automated error correction technique for three different types of superdense coding algorithm on a 7-qubit superconducting IBM quantum computer and also on a 27-qubit quantum simulator in the presence of noise. Probability histograms are generated to show the high fidelity of our experimental results. Quantum state tomography is also carried out with the quantum computer to explicate the efficacy of our method.
An ancilla-based single particle measurement scheme is illustrated for Bell state discrimination which does not lead to the collapse of the wave function.It enables the extraction of partial information, e.g., parity and phase independently, that generalizes to multi-particle entangled states of qubits, which also applied to qudits.It can be used for error correction in a quantum circuit architecture involving basic gates like Hadamard and Controlled-NOT.It helps unravel the syndrome operators and, what is more, in the multi-partite state that the individual constituents lack.
Quantum entanglement is a unique criterion of the quantum realm and an essential tool to secure quantum communication. Ensuring high-fidelity entanglement has always been a challenging task owing to interaction with the hostile channel environment created due to quantum noise and decoherence. Though several methods have been proposed, correcting almost all arbitrary errors is still a gigantic task. As one of the main contributions of this work, a new model for 'large distance communication' has been proposed, which may correct all bit flip errors or other errors quite extensively if proper encoding and subspace measurements are used. To achieve this purpose, at the very first step, the idea of differentiating the 'long-distance communication' and 'short-distance applications' has been introduced. Short-distance is determined by the maximum range of applying unitary control gates by the qubit technology. How the error correcting ability of Quantum codes change for short and long-distance application is investigated in this work, which was not explored in previous literatures as far as we know. At the beginning, we have applied stabilizer formalism and Repetition Code for decoding to distinguish the error correcting ability in long and short distance communication. Particularly for short-distance communication, it has been demonstrated that a 'properly encoded' bell state can identify all the bit flip, or phase flip errors with 100% accuracy theoretically. In contrast, if the bell states are used in long-distance communication, the error-detecting and correcting ability reduces at huge amounts. To increase the fidelity significantly and correct the errors quite extensively for long-distance communication, a new model based on classical communication protocol has been suggested. All the required circuits in these processes have been generalized for arbitrary (even) numbers of ancilla qubits during encoding. Proposed analytical results have also been verified with the Simulation results of IBM QISKIT QASM.
In this paper, we discuss the concepts of quantum coding and error correction for a five-particle entangled state. Error correction can correct bit-reverse or phase-flip errors of one and two quantum states and is no longer limited to only one quantum state. We encode a single quantum state into a five-particle entangled state before being transferred to the sender. We designed an automatic error-correction circuit to correct errors caused by noise. We also simplify the design process for a multiple quantum error-correction circuit. We compare error-correction schemes for five and three entangled particles in terms of efficiency and capabilities. The results show that error-correction efficiency and fidelity are improved.
Mapping the error syndromes to error operators is the core of quantum decoding network and the key step to realize quantum error correction. The definitions of the bit flip error syndrome matrix and the phase flip error syndrome matrix are presented, and then the error syndromes of Pauli errors are expressed in terms of the columns of the bit flip error syndrome matrix and the phase flip error syndrome matrix. It is also shown that the error syndrome matrix of a stabilizer code is determined by its check matrix, which is similar to the relationship between the classical error and the parity check matrix of classical codes. So, the techniques of error detection and error correction for classical linear codes can be applied to quantum stabilizer codes after some modifications. The error correction circuits are constructed based on the relationship between the error operator and error syndrom. The decoding circuit is constructed by reversing the encoding circuit because the encoding operators are unitary.
Most of the quantum error correction methods are symmetric. Symmetric methods are implemented by considering the amplitude of bit flip(X) and phase flip(Z) errors as same. With the quantum experiments, it is observed that the amplitude of Z errors are more compared to X errors. Due to which the need of asymmetric error correction has increased. This paved a path for the development of asymmetric error correction methods. In this paper, we discussed the concept of asymmetric quantum error correction (AQEC) and proposed an efficient approach for AQEC with encoding, syndrome measurement and decoding operations with increased fidelity to 85.89% and reduced circuit depth to 48%.