Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1004.0968 · Physical Review A

Velocity-selected molecular pulses produced by an electric guide

Christian Sommer, M. Motsch, Sotir Chervenkov, L. D. van Buuren, Martin Zeppenfeld, Pepijn W. H. Pinkse, Gerhard Rempe

Published Jul 16, 2010• 27 citations
arXivHTMLPDF

Abstract

Electrostatic velocity filtering is a technique for the production of continuous guided beams of slow polar molecules from a thermal gas. We extended this technique to produce pulses of slow molecules with a narrow velocity distribution around a tunable velocity. The pulses are generated by sequentially switching the voltages on adjacent segments of an electric quadrupole guide synchronously with the molecules propagating at the desired velocity. This technique is demonstrated for deuterated ammonia (ND${}_{3}$), delivering pulses with a velocity in the range of $20\ensuremath{-}100$ m/s and a relative velocity spread of $(16\ifmmode\pm\else\textpm\fi{}2)%$ at full width at half maximum. At velocities around $60$ m/s, the pulses contain up to ${10}^{6}$ molecules each. The data are well reproduced by Monte Carlo simulations, which provide useful insight into the mechanisms of velocity selection.

DOI
10.1103/physreva.82.013410

Related papers

Construction and Operation of a Cryogenic Source for Cold Polar Molecules

Christian Sommer

This thesis reports on the combination of buffer-gas cooling with electric velocity filtering to produce a high-density guided beam of slow and internally cold polar molecules. In the continuous source, warm molecules are first cooled by collisions with a cryogenic helium buffer gas. Cold molecules are then extracted by means of an electric quadrupole guide. For formaldehyde the population of individual rotational states in the guide is monitored by depletion spectroscopy, resulting in single-state populations up to 82 %. This thesis also reports on a technique to produce pulses of slow guided molecules. The pulses exhibit a narrow velocity distribution around a tunable velocity.

•Jan 1, 2011•0 citations

State-selective detection of velocity-filtered ND 3 molecules

Benjamin Bertsche, Andreas Osterwalder

Translationally cold and slow ND${}_{3}$ is prepared by filtering the slow molecules from a thermal gas-phase sample using a curved electrostatic hexapole guide. This filter, like the curved quadrupole guide introduced by Rangwala et al. [Phys. Rev. A 67, 043406 (2003)] selects molecules by their forward velocity and effective electric dipole moment. Here we describe two main modifications with respect to previous work: (1) A segmented hexapole guide is used that produces a harmonic potential for the linearly Stark-shifted levels of ND${}_{3}$. A curved guide is combined with a straight hexapole guide, and independent high-voltage supplies are employed to allow for bandpass velocity filtering. (2) State-selective laser ionization is used to obtain time- and state-selective detection of the guided molecules. This enables the experimental determination of the rotational state population of the guided molecules.

arXiv:1004.3812•Physical Review A•Sep 17, 2010•30 citations

Controllable surface electrostatic velocity filter for polar molecules

Shunyong Hou, Qin Lin Wang, Lianzhong Deng +1 more

We propose a scheme of a surface electrostatic velocity filter capable of preparing cold polar molecules on the surface of a substrate by selecting a low-velocity component of an effusive beam from a thermal gas reservoir. Using ND3 as a molecular sample, the dependence of the performance of the filter on the parameters of both the filter setup and the incident molecular beam is investigated by using a theoretical model and Monte Carlo simulations. A detailed study of the guiding process of molecules, including the evolution of phase space density of the packet in the filter, is carried out and shows that the beam selection process is mainly completed in the front part of the filter.

Journal of Physics B Atomic Molecular and Optical Physics•Jun 26, 2013•0 citations

Cold guided beams of polar molecules

M. Motsch

Slow molecules are efficiently extracted from a thermal reservoir by exploiting the interaction between polar molecules and the field provided by an electrostatic quadrupole guide. Electrostatic velocity filtering is widely applicable, which is demonstrated by producing guided beams of ammonia ND3, formaldehyde H2CO, and the water isotopologs H2O, D2O, and HDO. Ultraviolet depletion spectroscopy in a cold guided beam of formaldehyde makes the population in individual rotational states visible and testifies their key role in velocity filtering. Enhanced Rayleigh scattering into an optical cavity is investigated as an alternative non-destructive detection method for cold molecules. For various room-temperature gases, the observed enhancement is well described by interference of electromagnetic fields scattered into the resonator by a classical driven dipole oscillator.

•Jan 1, 2010•1 citation

Continuous guided beams of slow and internally cold polar molecules

Christian Sommer, Laurens D. van Buuren, M. Motsch +4 more

We describe the combination of buffer-gas cooling with electrostatic velocity filtering to produce a high-flux continuous guided beam of internally cold and slow polar molecules. In a previous paper (L.D. van Buuren et al., Phys. Rev. Lett., 2009, 102, 033001) we presented results on density and state purity for guided beams of ammonia and formaldehyde using an optimized set-up. Here we describe in more detail the technical aspects of the cryogenic source, its operation, and the optimization experiments that we performed to obtain the best performance. The versatility of the source is demonstrated by the production of guided beams of different molecular species.

arXiv:0812.1923•Faraday Discussions•Jan 1, 2009•43 citations

Continuous source of translationally cold dipolar molecules

S. A. Rangwala, T. Junglen, T. Rieger +2 more

The Stark interaction of polar molecules with an inhomogeneous electric field is exploited to select slow molecules from a room-temperature reservoir and guide them into an ultrahigh vacuum chamber. A linear electrostatic quadrupole with a curved section selects molecules with small transverse and longitudinal velocities. The source is tested with formaldehyde $({\mathrm{H}}_{2}\mathrm{CO})$ and deuterated ammonia $({\mathrm{ND}}_{3}).$ With ${\mathrm{H}}_{2}\mathrm{CO}$ a continuous flux is measured of $\ensuremath{\approx}{10}^{9}/\mathrm{s}$ and a longitudinal temperature of a few kelvin. The data are compared with the result of a Monte Carlo simulation.

arXiv:physics/0209041•Physical Review A•Apr 17, 2003•210 citations
Electrostatic velocity filtering is a technique for the production of continuous guided beams of slow polar molecules from a thermal gas. We extended this technique to produce pulses of slow molecules with a narrow velocity distribution around a tunable velocity. The pulses are generated by sequentially switching the voltages on adjacent segments of an electric quadrupole guide synchronously with the molecules propagating at the desired velocity. This technique is demonstrated for deuterated ammonia (ND3{}_{3}3​), delivering pulses with a velocity in the range of 20\ensuremath−10020\ensuremath{-}10020\ensuremath−100 m/s and a relative velocity spread of (16\ifmmode±\else\textpm\fi2)(16\ifmmode\pm\else\textpm\fi{}2)%(16\ifmmode±\else\textpm\fi2) at full width at half maximum. At velocities around 606060 m/s, the pulses contain up to 106{10}^{6}106 molecules each. The data are well reproduced by Monte Carlo simulations, which provide useful insight into the mechanisms of velocity selection.
This thesis reports on the combination of buffer-gas cooling with electric velocity filtering to produce a high-density guided beam of slow and internally cold polar molecules. In the continuous source, warm molecules are first cooled by collisions with a cryogenic helium buffer gas. Cold molecules are then extracted by means of an electric quadrupole guide. For formaldehyde the population of individual rotational states in the guide is monitored by depletion spectroscopy, resulting in single-state populations up to 82 %. This thesis also reports on a technique to produce pulses of slow guided molecules. The pulses exhibit a narrow velocity distribution around a tunable velocity.
Translationally cold and slow ND3{}_{3}3​ is prepared by filtering the slow molecules from a thermal gas-phase sample using a curved electrostatic hexapole guide. This filter, like the curved quadrupole guide introduced by Rangwala et al. [Phys. Rev. A 67, 043406 (2003)] selects molecules by their forward velocity and effective electric dipole moment. Here we describe two main modifications with respect to previous work: (1) A segmented hexapole guide is used that produces a harmonic potential for the linearly Stark-shifted levels of ND3{}_{3}3​. A curved guide is combined with a straight hexapole guide, and independent high-voltage supplies are employed to allow for bandpass velocity filtering. (2) State-selective laser ionization is used to obtain time- and state-selective detection of the guided molecules. This enables the experimental determination of the rotational state population of the guided molecules.
We propose a scheme of a surface electrostatic velocity filter capable of preparing cold polar molecules on the surface of a substrate by selecting a low-velocity component of an effusive beam from a thermal gas reservoir. Using ND3 as a molecular sample, the dependence of the performance of the filter on the parameters of both the filter setup and the incident molecular beam is investigated by using a theoretical model and Monte Carlo simulations. A detailed study of the guiding process of molecules, including the evolution of phase space density of the packet in the filter, is carried out and shows that the beam selection process is mainly completed in the front part of the filter.
Slow molecules are efficiently extracted from a thermal reservoir by exploiting the interaction between polar molecules and the field provided by an electrostatic quadrupole guide. Electrostatic velocity filtering is widely applicable, which is demonstrated by producing guided beams of ammonia ND3, formaldehyde H2CO, and the water isotopologs H2O, D2O, and HDO. Ultraviolet depletion spectroscopy in a cold guided beam of formaldehyde makes the population in individual rotational states visible and testifies their key role in velocity filtering. Enhanced Rayleigh scattering into an optical cavity is investigated as an alternative non-destructive detection method for cold molecules. For various room-temperature gases, the observed enhancement is well described by interference of electromagnetic fields scattered into the resonator by a classical driven dipole oscillator.
We describe the combination of buffer-gas cooling with electrostatic velocity filtering to produce a high-flux continuous guided beam of internally cold and slow polar molecules. In a previous paper (L.D. van Buuren et al., Phys. Rev. Lett., 2009, 102, 033001) we presented results on density and state purity for guided beams of ammonia and formaldehyde using an optimized set-up. Here we describe in more detail the technical aspects of the cryogenic source, its operation, and the optimization experiments that we performed to obtain the best performance. The versatility of the source is demonstrated by the production of guided beams of different molecular species.
The Stark interaction of polar molecules with an inhomogeneous electric field is exploited to select slow molecules from a room-temperature reservoir and guide them into an ultrahigh vacuum chamber. A linear electrostatic quadrupole with a curved section selects molecules with small transverse and longitudinal velocities. The source is tested with formaldehyde (H2CO)({\mathrm{H}}_{2}\mathrm{CO})(H2​CO) and deuterated ammonia (ND3).({\mathrm{ND}}_{3}).(ND3​). With H2CO{\mathrm{H}}_{2}\mathrm{CO}H2​CO a continuous flux is measured of $\ensuremath{\approx}{10}^{9}/\mathrm{s}$ and a longitudinal temperature of a few kelvin. The data are compared with the result of a Monte Carlo simulation.