Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1002.4417 · The Journal of Chemical Physics

Investigation of antirelaxation coatings for alkali-metal vapor cells using surface science techniques

Scott J. Seltzer, David J. Michalak, Marcus H. Donaldson, M. V. Balabas, Stephen Barber, Steven L. Bernasek, Marie-Anne Bouchiat, Alexander Hexemer, Amber M. Hibberd, Derek F. Jackson Kimball, Cherno Jaye, Todor S. Karaulanov, Frank A. Narducci, S. A. Rangwala, H. G. Robinson, A. K. Shmakov, Dmitriy L. Voronov, Valeriy V. Yashchuk, Alexander Pines, Dmitry Budker

Published Oct 11, 2010• 69 citations
arXivHTMLPDF

Abstract

Many technologies based on cells containing alkali-metal atomic vapor benefit from the use of antirelaxation surface coatings in order to preserve atomic spin polarization. In particular, paraffin has been used for this purpose for several decades and has been demonstrated to allow an atom to experience up to 10 000 collisions with the walls of its container without depolarizing, but the details of its operation remain poorly understood. We apply modern surface and bulk techniques to the study of paraffin coatings in order to characterize the properties that enable the effective preservation of alkali spin polarization. These methods include Fourier transform infrared spectroscopy, differential scanning calorimetry, atomic force microscopy, near-edge x-ray absorption fine structure spectroscopy, and x-ray photoelectron spectroscopy. We also compare the light-induced atomic desorption yields of several different paraffin materials. Experimental results include the determination that crystallinity of the coating material is unnecessary, and the detection of C[Double Bond]C double bonds present within a particular class of effective paraffin coatings. Further study should lead to the development of more robust paraffin antirelaxation coatings, as well as the design and synthesis of new classes of coating materials.

DOI
10.1063/1.3489922

Related papers

Optical characterization of antirelaxation coatings

S. Tsvetkov, S. Gateva, S. Cartaleva +2 more

Antirelaxation coatings (ARC) are used in optical cells containing alkali metal vapor to reduce the depolarization of alkali atoms after collisions with the cell walls. The long-lived ground state polarization is a basis for development of atomic clocks, magnetometers, quantum memory, slow light experiments, precision measurements of fundamental symmetries etc. In this work, a simple method for measuring the number of collisions of the alkali atoms with the cell walls without atomic spin randomization (Nasyrov et al., Proc. SPIE (2015)) was applied to characterize the AR properties of two PDMS coatings prepared from different solutions in ether (PDMS 2% and PDMS 5%). We observed influence of the light-induced atomic desorption (LIAD) on the AR properties of coatings.

Journal of Physics Conference Series•Mar 1, 2018•1 citation

Alkali atoms density and spin randomization in antirelaxation coated cells

S. Tsvetkov, S. Gateva, S. Cartaleva

Antirelaxation coatings (ARC) are used in optical cells containing alkali metal vapor to reduce the depolarization of alkali atoms after collisions with the cell walls. The long-lived ground state polarization is a basis for development of atomic clocks, magnetometers, quantum memory, slow light experiments, precision measurements of fundamental symmetries etc. Another application of ARC is with Light-Induced Atomic Desorption (LIAD) for implementation optical dispensers for loading atomic devices as atomic magnetometers, atomic clocks, magneto-optical traps and their miniaturization. In this work, the Rb atomic density and the spin randomization (the number of collisions without spin depolarization) are investigated in PDMS coated vacuum cell when the density is controlled by LIAD, and compared with the results when the density is controlled by temperature. A simple method for measurement of the number of collisions without spin-randomization is used, which comprises recording of the time dependence of the fluorescence intensity of alkali atoms during exposure of the cell to resonant radiation pulses. The obtained results are discussed from point of view of LIAD applications for density control in spectroscopy investigations.

AIP conference proceedings•Jan 1, 2019•1 citation

Effect of Preparation Processes on Structural Thermal Stability and Collision Energy Dissipation of Common Antirelaxation Coatings on Quartz Substrates

Xinxin He, Xiaoya Liu, Jun Tang +5 more

Paraffin and octadecyltrichlorosilane (OTS) coatings can alleviate collisions between alkali-metal atoms and cell walls and then prolong the atomic spin-polarization lifetime. The surface structure and collision effects of these antirelaxation coatings, as well as the methods to avoid antirelaxation invalidity, have been the focus of researchers. This study investigated the thermolability of coating surface structure and the collision interactions between alkali metal atoms and coatings, considering the influence of various coating preparation factors, where this collision interaction is indirectly analyzed by measuring the collision energy dissipation between an atomic force microscopy (AFM) probe and the atoms on the coating surface. We found that appropriate evaporation time, carbochain length, and postannealing process can enhance the thermostability of the paraffin coating and eliminate its morphological defects. Furthermore, the OTS/water concentration, the soaking time, and the type of solvent have different levels of influence on the cluster formation and the thermostability of the OTS coatings. Moreover, the antirelaxation performance of coatings has been shown to be characterized by counting the energy dissipated when the AFM probe collides with the antirelaxation coating, replacing the conventional light-atom interaction- based method for measuring the relaxation characteristics, but requiring specific coating preparation factors to be maintained.

Langmuir•Aug 31, 2023•3 citations

Light-induced desorption of alkali-metal atoms from paraffin coating

Evgeny B. Alexandrov, M. V. Balabas, Dmitry Budker +4 more

Observation of nonthermal, light-induced desorption of Cs and Rb atoms from paraffin coating is reported. Buffer-gas-free paraffin-coated cells containing Cs and Rb were exposed to laser light of various intensities and frequencies, and the change of the vapor densities as a function of time was investigated. Because atomic polarization relaxes very slowly in paraffin-coated cells (spin-relaxation times can be $\ensuremath{\gtrsim}1\mathrm{s}),$ they are applied in a variety of precision measurements (e.g., magnetometry, discrete symmetry tests, etc.). Light-induced desorption may be useful in such measurements as a method to control atomic density without changing the temperature of the cell.

Physical Review A•Oct 23, 2002•153 citations

Method for characterizing self-assembled monolayers as antirelaxation wall coatings for alkali vapor cells

Youngwoo Yi, H. G. Robinson, Svenja A. Knappe +5 more

We describe a method for characterizing self-assembled monolayers (SAMs) in terms of their performance as antirelaxation wall coatings for alkali atom vapor cells. A combination of initial surface analysis and subsequent laser spectroscopy is used to provide insight into the quality of the coating, as well as its performance under the exposure to alkalis as it occurs, for example, when used in applications such as atomic magnetometers or clocks. Fused silica plates coated with octadecyltrichlorosilane SAMs were used to make cubic R87b gas cells. The surface was characterized by x-ray diffraction, contact angle measurements, and atomic force microscopy. Measurements of hyperfine resonance linewidths and frequency shifts show that the rubidium vapor atoms collide up to 40 times with the walls of the cells before their coherence relaxes and their adsorption energy is around 0.065 eV. Chemical analysis of the cell indicates some weak reactions between the coating and the rubidium atoms.

Journal of Applied Physics•Jul 15, 2008•77 citations

High-temperature alkali vapor cells with antirelaxation surface coatings

Scott J. Seltzer, Michael V. Romalis

Antirelaxation surface coatings allow long spin relaxation times in alkali-metal cells without buffer gas, enabling faster diffusion of the alkali atoms throughout the cell and giving larger signals due to narrower optical linewidths. Effective coatings were previously unavailable for operation at temperatures above 80 °C. We demonstrate that octadecyltrichlorosilane (OTS) can allow potassium or rubidium atoms to experience hundreds of collisions with the cell surface before depolarizing, and that an OTS coating remains effective up to about 170 °C for both potassium and rubidium. We consider the experimental concerns of operating without buffer gas and with minimal quenching gas at high vapor density, studying the stricter need for effective quenching of excited atoms and deriving the optical rotation signal shape for atoms with resolved hyperfine structure in the spin-temperature regime. As an example of a high-temperature application of antirelaxation coated alkali vapor cells, we operate a spin-exchange relaxation-free atomic magnetometer with sensitivity of 6 fT/Hz and magnetic linewidth as narrow as 2 Hz.

arXiv:0906.3054•Journal of Applied Physics•Dec 1, 2009•146 citations
Many technologies based on cells containing alkali-metal atomic vapor benefit from the use of antirelaxation surface coatings in order to preserve atomic spin polarization. In particular, paraffin has been used for this purpose for several decades and has been demonstrated to allow an atom to experience up to 10 000 collisions with the walls of its container without depolarizing, but the details of its operation remain poorly understood. We apply modern surface and bulk techniques to the study of paraffin coatings in order to characterize the properties that enable the effective preservation of alkali spin polarization. These methods include Fourier transform infrared spectroscopy, differential scanning calorimetry, atomic force microscopy, near-edge x-ray absorption fine structure spectroscopy, and x-ray photoelectron spectroscopy. We also compare the light-induced atomic desorption yields of several different paraffin materials. Experimental results include the determination that crystallinity of the coating material is unnecessary, and the detection of C[Double Bond]C double bonds present within a particular class of effective paraffin coatings. Further study should lead to the development of more robust paraffin antirelaxation coatings, as well as the design and synthesis of new classes of coating materials.
Antirelaxation coatings (ARC) are used in optical cells containing alkali metal vapor to reduce the depolarization of alkali atoms after collisions with the cell walls. The long-lived ground state polarization is a basis for development of atomic clocks, magnetometers, quantum memory, slow light experiments, precision measurements of fundamental symmetries etc. In this work, a simple method for measuring the number of collisions of the alkali atoms with the cell walls without atomic spin randomization (Nasyrov et al., Proc. SPIE (2015)) was applied to characterize the AR properties of two PDMS coatings prepared from different solutions in ether (PDMS 2% and PDMS 5%). We observed influence of the light-induced atomic desorption (LIAD) on the AR properties of coatings.
Antirelaxation coatings (ARC) are used in optical cells containing alkali metal vapor to reduce the depolarization of alkali atoms after collisions with the cell walls. The long-lived ground state polarization is a basis for development of atomic clocks, magnetometers, quantum memory, slow light experiments, precision measurements of fundamental symmetries etc. Another application of ARC is with Light-Induced Atomic Desorption (LIAD) for implementation optical dispensers for loading atomic devices as atomic magnetometers, atomic clocks, magneto-optical traps and their miniaturization. In this work, the Rb atomic density and the spin randomization (the number of collisions without spin depolarization) are investigated in PDMS coated vacuum cell when the density is controlled by LIAD, and compared with the results when the density is controlled by temperature. A simple method for measurement of the number of collisions without spin-randomization is used, which comprises recording of the time dependence of the fluorescence intensity of alkali atoms during exposure of the cell to resonant radiation pulses. The obtained results are discussed from point of view of LIAD applications for density control in spectroscopy investigations.
Paraffin and octadecyltrichlorosilane (OTS) coatings can alleviate collisions between alkali-metal atoms and cell walls and then prolong the atomic spin-polarization lifetime. The surface structure and collision effects of these antirelaxation coatings, as well as the methods to avoid antirelaxation invalidity, have been the focus of researchers. This study investigated the thermolability of coating surface structure and the collision interactions between alkali metal atoms and coatings, considering the influence of various coating preparation factors, where this collision interaction is indirectly analyzed by measuring the collision energy dissipation between an atomic force microscopy (AFM) probe and the atoms on the coating surface. We found that appropriate evaporation time, carbochain length, and postannealing process can enhance the thermostability of the paraffin coating and eliminate its morphological defects. Furthermore, the OTS/water concentration, the soaking time, and the type of solvent have different levels of influence on the cluster formation and the thermostability of the OTS coatings. Moreover, the antirelaxation performance of coatings has been shown to be characterized by counting the energy dissipated when the AFM probe collides with the antirelaxation coating, replacing the conventional light-atom interaction- based method for measuring the relaxation characteristics, but requiring specific coating preparation factors to be maintained.
Observation of nonthermal, light-induced desorption of Cs and Rb atoms from paraffin coating is reported. Buffer-gas-free paraffin-coated cells containing Cs and Rb were exposed to laser light of various intensities and frequencies, and the change of the vapor densities as a function of time was investigated. Because atomic polarization relaxes very slowly in paraffin-coated cells (spin-relaxation times can be $\ensuremath{\gtrsim}1\mathrm{s}),$ they are applied in a variety of precision measurements (e.g., magnetometry, discrete symmetry tests, etc.). Light-induced desorption may be useful in such measurements as a method to control atomic density without changing the temperature of the cell.
We describe a method for characterizing self-assembled monolayers (SAMs) in terms of their performance as antirelaxation wall coatings for alkali atom vapor cells. A combination of initial surface analysis and subsequent laser spectroscopy is used to provide insight into the quality of the coating, as well as its performance under the exposure to alkalis as it occurs, for example, when used in applications such as atomic magnetometers or clocks. Fused silica plates coated with octadecyltrichlorosilane SAMs were used to make cubic R87b gas cells. The surface was characterized by x-ray diffraction, contact angle measurements, and atomic force microscopy. Measurements of hyperfine resonance linewidths and frequency shifts show that the rubidium vapor atoms collide up to 40 times with the walls of the cells before their coherence relaxes and their adsorption energy is around 0.065 eV. Chemical analysis of the cell indicates some weak reactions between the coating and the rubidium atoms.
Antirelaxation surface coatings allow long spin relaxation times in alkali-metal cells without buffer gas, enabling faster diffusion of the alkali atoms throughout the cell and giving larger signals due to narrower optical linewidths. Effective coatings were previously unavailable for operation at temperatures above 80 °C. We demonstrate that octadecyltrichlorosilane (OTS) can allow potassium or rubidium atoms to experience hundreds of collisions with the cell surface before depolarizing, and that an OTS coating remains effective up to about 170 °C for both potassium and rubidium. We consider the experimental concerns of operating without buffer gas and with minimal quenching gas at high vapor density, studying the stricter need for effective quenching of excited atoms and deriving the optical rotation signal shape for atoms with resolved hyperfine structure in the spin-temperature regime. As an example of a high-temperature application of antirelaxation coated alkali vapor cells, we operate a spin-exchange relaxation-free atomic magnetometer with sensitivity of 6 fT/Hz and magnetic linewidth as narrow as 2 Hz.