Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1002.4311 · IEEE Transactions on Information Theory

Lowering the Error Floor of LDPC Codes Using Cyclic Liftings

Reza Asvadi, Amir H. Banihashemi, Mahmoud Ahmadian‐Attari

Published Mar 15, 2011• 99 citations
arXivHTMLPDF

Abstract

Cyclic liftings are proposed to lower the error floor of low-density parity-check (LDPC) codes. The liftings are designed to eliminate dominant trapping sets of the base code by removing the short cycles which are part of the trapping sets. We derive a necessary and sufficient condition for the cyclic permutations assigned to the edges of a cycle ξ of lengthl(ξ) in the base graph such that the inverse image of ξ in the lifted graph consists of only cycles of length strictly larger thanl(ξ). The proposed method is universal in the sense that it can be applied to any LDPC code over any channel and for any iterative decoding algorithm. It also preserves important properties of the base code such as degree distributions, and in some cases, the code rate. The constructed codes are quasi-cyclic and thus attractive from a practical point of view. The proposed method is applied to both structured and random codes over the binary symmetric channel (BSC). The error floor improves consistently by increasing the lifting degree, and the results show significant improvements in the error floor compared to the base code, a random code of the same degree distribution and block length, and a random lifting of the same degree. Similar improvements are also observed when the codes designed for the BSC are applied to the additive white Gaussian noise (AWGN) channel.

DOI
10.1109/tit.2011.2110150

Related papers

Lowering the error floor of LDPC codes using cyclic liftings

Reza Asvadi, Amir H. Banihashemi, Mahmoud Ahmadian‐Attari

Cyclic liftings are proposed to lower the error floor of low-density parity-check (LDPC) codes. The liftings are designed to eliminate dominant trapping sets of the base code by removing the short cycles which form the trapping sets. We derive a necessary and sufficient condition for the cyclic permutations assigned to the edges of a cycle c of length ℓ(c) in the base graph such that the inverse image of c in the lifted graph consists of only cycles of length strictly larger than ℓ(c). The proposed method is universal in the sense that it can be applied to any LDPC code over any channel and for any iterative decoding algorithm. It also preserves important properties of the base code such as degree distributions. The proposed method is applied to both structured and random codes over the binary symmetric channel (BSC). The error floor improves consistently by increasing the lifting degree, and the results show significant improvements in the error floor compared to the base code, a random code of the same degree distribution and block length, and a random lifting of the same degree. Similar improvements are also observed when the codes designed for the BSC are applied to the additive white Gaussian noise (AWGN) channel.

IEEE International Symposium on Information Theory (ISIT)•Jun 1, 2010•13 citations

Design of Finite-Length Irregular Protograph Codes with Low Error Floors over the Binary-Input AWGN Channel Using Cyclic Liftings

Reza Asvadi, Amir H. Banihashemi, Mahmoud Ahmadian‐Attari

We propose a technique to design finite-length irregular low-density parity-check (LDPC) codes over the binary-input additive white Gaussian noise (AWGN) channel with good performance in both the waterfall and the error floor region. The design process starts from a protograph which embodies a desirable degree distribution. This protograph is then lifted cyclically to a certain block length of interest. The lift is designed carefully to maximize the components of the approximate cycle extrinsic message degree (ACE) spectrum of the code's Tanner graph in a greedy fashion. As a consequence, the designed code would perform well in the error floor region. Moreover, the proposed construction results in quasi-cyclic codes which are attractive in practice due to simple encoder and decoder implementation. Simulation results are provided to demonstrate the effectiveness of the proposed construction in comparison with similar existing constructions.

arXiv:1102.0424•IEEE Transactions on Communications•Mar 13, 2012•26 citations

On the Construction of LDPC Codes Free of Small Trapping Sets by Controlling Cycles

Xiongfei Tao, Yufei Li, Yonghe Liu +1 more

Low-density parity-check (LDPC) codes exhibit excellent error correcting capability. However, small trapping sets in the Tanner graph are harmful to the iterative decoding algorithm. In this letter, we present a method of constructing (3, n) girth-eight quasi-cyclic LDPC codes with low error floor by removing the small trapping sets from the Tanner graph. To address this issue, we analyze the relationship between eight-cycles and small trapping sets of Tanner graphs based on fully connected base graphs without parallel edges. We find that if some eight-cycles are not found in the Tanner graphs, any elementary trapping set in the range of a ≤ 8 and b ≤ 3 is removed naturally. We also derive a lower bound on the permutation size for the construction of such codes. The experimental simulation shows a favorable error rate performance with lower error floor over additive white Gaussian noise channels.

IEEE Communications Letters•Mar 8, 2017•31 citations

Design of irregular quasi-cyclic protograph codes with low error floors

Reza Asvadi, Amir H. Banihashemi, Mahmoud Ahmadian‐Attari

We propose a technique to design finite-length irregular low-density parity-check (LDPC) codes over the binary-input additive white Gaussian noise (AWGN) channel with good performance in both the waterfall and the error floor region. The design process starts from a protograph which embodies a desirable degree distribution. This protograph is then lifted cyclically to a certain block length of interest. The lift is designed carefully to satisfy a certain approximate cycle extrinsic message degree (ACE) spectrum. The target ACE spectrum is one with extremal properties, implying a good error floor performance for the designed code. The proposed construction results in quasi-cyclic codes which are attractive in practice due to simple encoder and decoder implementation. Simulation results are provided to demonstrate the effectiveness of the proposed construction in comparison with similar existing constructions.

IEEE International Symposium on Information Theory (ISIT)•Jul 1, 2011•7 citations

Designing LDPC Codes without small trapping sets by using Tanner Graph Covers

Miloš Ivković, Shashi Kiran Chilappagari, Bane V. Vasic

We present a method for lowering the error floor of low-density parity check (LDPC) codes. It is based on Tanner graph covers that do not have trapping sets from the original code. The advantages of the method are that it is universal, as it can be applied to any LDPC code/channel model/decoding algorithm and it improves performance at the expense of increasing the code length, without losing the code regularity, without changing the decoding algorithm, and, under certain conditions, without lowering the code rate. We illustrate the method by modifying Tanner, MacKay and Margulis codes to improve performance on the binary symmetric channel (BSC) under the Gallager B decoding algorithm.

IEEE International Symposium on Information Theory (ISIT)•Jun 1, 2007•4 citations

Construction of QC-LDPC Codes with Low Error Floor by Efficient Systematic Search and Elimination of Trapping Sets

Bashirreza Karimi

In this thesis, we propose a systematic design of binary protograph-based quasi-cyclic (QC) low-density parity-check (LDPC) codes with low error floor.We first characterize the trapping sets of such codes and demonstrate, using edge coloring techniques, that the QC structure of the code eliminates some of the trapping set structures that can exist in a code with the same degree distribution and girth but lacking the QC structure.Based on this characterization, our design aims at eliminating a targeted collection of trapping sets.Considering the parent/child relationship between the structures of the collection, we search for and eliminate those trapping sets that are in the collection but are not a child of any other trapping set in the collection.An efficient layered algorithm is designed for the search of these targeted trapping sets.Compared to the existing codes in the literature, the designed codes are superior in the sense that they are free of the same collection of trapping sets while having a smaller block length, or a larger collection of trapping sets while having the same block length.In addition, the efficiency of the search algorithm makes it possible to design codes with larger degrees which are free of trapping sets within larger ranges compared to the state-of-the-art.Moreover, we design finite-length binary irregular protograph-based QC-LDPC codes with good waterfall performance and low error floor.To achieve a low error floor, we eliminate a targeted set of dominant elementary trapping sets (ETS) L in the Tanner graph of the code.This is a more challenging task since the variety of problematic structures is much larger than that of regular codes.For a given rate and girth, the codes are designed to be free of the largest set of problematic ETSs for a given block length, or to have the shortest block length while a given set of ETSs is avoided.The design is based on a search algorithm that identifies whether any instance of any structure within L exists in the Tanner graph of the constructed code or not.The search algorithm performs this task with minimal complexity, making it feasible to construct practical codes by running the search algorithm a large numberiiiFirst, I would like to thank my supervisor, Professor Amir H. Banihashemi for leading and encouraging me during my research.His guidance helped me in all the time of research and writing of this thesis.Thanks must also go to my committee members for their helpful suggestions and discussions.I can not express my appreciation to my wonderful wife, Arefeh who devoted her never ending love to me and was my partner towards success.I also appreciate the love and support of my family,

•Jan 1, 2021•2 citations
Cyclic liftings are proposed to lower the error floor of low-density parity-check (LDPC) codes. The liftings are designed to eliminate dominant trapping sets of the base code by removing the short cycles which are part of the trapping sets. We derive a necessary and sufficient condition for the cyclic permutations assigned to the edges of a cycle ξ of lengthl(ξ) in the base graph such that the inverse image of ξ in the lifted graph consists of only cycles of length strictly larger thanl(ξ). The proposed method is universal in the sense that it can be applied to any LDPC code over any channel and for any iterative decoding algorithm. It also preserves important properties of the base code such as degree distributions, and in some cases, the code rate. The constructed codes are quasi-cyclic and thus attractive from a practical point of view. The proposed method is applied to both structured and random codes over the binary symmetric channel (BSC). The error floor improves consistently by increasing the lifting degree, and the results show significant improvements in the error floor compared to the base code, a random code of the same degree distribution and block length, and a random lifting of the same degree. Similar improvements are also observed when the codes designed for the BSC are applied to the additive white Gaussian noise (AWGN) channel.
Cyclic liftings are proposed to lower the error floor of low-density parity-check (LDPC) codes. The liftings are designed to eliminate dominant trapping sets of the base code by removing the short cycles which form the trapping sets. We derive a necessary and sufficient condition for the cyclic permutations assigned to the edges of a cycle c of length ℓ(c) in the base graph such that the inverse image of c in the lifted graph consists of only cycles of length strictly larger than ℓ(c). The proposed method is universal in the sense that it can be applied to any LDPC code over any channel and for any iterative decoding algorithm. It also preserves important properties of the base code such as degree distributions. The proposed method is applied to both structured and random codes over the binary symmetric channel (BSC). The error floor improves consistently by increasing the lifting degree, and the results show significant improvements in the error floor compared to the base code, a random code of the same degree distribution and block length, and a random lifting of the same degree. Similar improvements are also observed when the codes designed for the BSC are applied to the additive white Gaussian noise (AWGN) channel.
We propose a technique to design finite-length irregular low-density parity-check (LDPC) codes over the binary-input additive white Gaussian noise (AWGN) channel with good performance in both the waterfall and the error floor region. The design process starts from a protograph which embodies a desirable degree distribution. This protograph is then lifted cyclically to a certain block length of interest. The lift is designed carefully to maximize the components of the approximate cycle extrinsic message degree (ACE) spectrum of the code's Tanner graph in a greedy fashion. As a consequence, the designed code would perform well in the error floor region. Moreover, the proposed construction results in quasi-cyclic codes which are attractive in practice due to simple encoder and decoder implementation. Simulation results are provided to demonstrate the effectiveness of the proposed construction in comparison with similar existing constructions.
Low-density parity-check (LDPC) codes exhibit excellent error correcting capability. However, small trapping sets in the Tanner graph are harmful to the iterative decoding algorithm. In this letter, we present a method of constructing (3, n) girth-eight quasi-cyclic LDPC codes with low error floor by removing the small trapping sets from the Tanner graph. To address this issue, we analyze the relationship between eight-cycles and small trapping sets of Tanner graphs based on fully connected base graphs without parallel edges. We find that if some eight-cycles are not found in the Tanner graphs, any elementary trapping set in the range of a ≤ 8 and b ≤ 3 is removed naturally. We also derive a lower bound on the permutation size for the construction of such codes. The experimental simulation shows a favorable error rate performance with lower error floor over additive white Gaussian noise channels.
We propose a technique to design finite-length irregular low-density parity-check (LDPC) codes over the binary-input additive white Gaussian noise (AWGN) channel with good performance in both the waterfall and the error floor region. The design process starts from a protograph which embodies a desirable degree distribution. This protograph is then lifted cyclically to a certain block length of interest. The lift is designed carefully to satisfy a certain approximate cycle extrinsic message degree (ACE) spectrum. The target ACE spectrum is one with extremal properties, implying a good error floor performance for the designed code. The proposed construction results in quasi-cyclic codes which are attractive in practice due to simple encoder and decoder implementation. Simulation results are provided to demonstrate the effectiveness of the proposed construction in comparison with similar existing constructions.
We present a method for lowering the error floor of low-density parity check (LDPC) codes. It is based on Tanner graph covers that do not have trapping sets from the original code. The advantages of the method are that it is universal, as it can be applied to any LDPC code/channel model/decoding algorithm and it improves performance at the expense of increasing the code length, without losing the code regularity, without changing the decoding algorithm, and, under certain conditions, without lowering the code rate. We illustrate the method by modifying Tanner, MacKay and Margulis codes to improve performance on the binary symmetric channel (BSC) under the Gallager B decoding algorithm.
In this thesis, we propose a systematic design of binary protograph-based quasi-cyclic (QC) low-density parity-check (LDPC) codes with low error floor.We first characterize the trapping sets of such codes and demonstrate, using edge coloring techniques, that the QC structure of the code eliminates some of the trapping set structures that can exist in a code with the same degree distribution and girth but lacking the QC structure.Based on this characterization, our design aims at eliminating a targeted collection of trapping sets.Considering the parent/child relationship between the structures of the collection, we search for and eliminate those trapping sets that are in the collection but are not a child of any other trapping set in the collection.An efficient layered algorithm is designed for the search of these targeted trapping sets.Compared to the existing codes in the literature, the designed codes are superior in the sense that they are free of the same collection of trapping sets while having a smaller block length, or a larger collection of trapping sets while having the same block length.In addition, the efficiency of the search algorithm makes it possible to design codes with larger degrees which are free of trapping sets within larger ranges compared to the state-of-the-art.Moreover, we design finite-length binary irregular protograph-based QC-LDPC codes with good waterfall performance and low error floor.To achieve a low error floor, we eliminate a targeted set of dominant elementary trapping sets (ETS) L in the Tanner graph of the code.This is a more challenging task since the variety of problematic structures is much larger than that of regular codes.For a given rate and girth, the codes are designed to be free of the largest set of problematic ETSs for a given block length, or to have the shortest block length while a given set of ETSs is avoided.The design is based on a search algorithm that identifies whether any instance of any structure within L exists in the Tanner graph of the constructed code or not.The search algorithm performs this task with minimal complexity, making it feasible to construct practical codes by running the search algorithm a large numberiiiFirst, I would like to thank my supervisor, Professor Amir H. Banihashemi for leading and encouraging me during my research.His guidance helped me in all the time of research and writing of this thesis.Thanks must also go to my committee members for their helpful suggestions and discussions.I can not express my appreciation to my wonderful wife, Arefeh who devoted her never ending love to me and was my partner towards success.I also appreciate the love and support of my family,