Recently, we have presented some simple arguments supporting the existence of a certain complementarity between thermodynamic quantities of temperature and energy, an idea suggested by Bohr and Heinsenberg in the early days of Quantum Mechanics. Such a complementarity is expressed as the impossibility to perform an exact simultaneous determination of the system energy and temperature by using an experimental procedure based on the thermal equilibrium with other system regarded as a measuring apparatus (thermometer). In this work, we provide a simple generalization of the last approach with the consideration of a thermodynamic situation with several control parameters.
Recently, we have presented some simple arguments supporting the existence of a certain complementarity between thermodynamic quantities of temperature and energy, an idea suggested by Bohr and Heinsenberg in the early days of Quantum Mechanics. Such a complementarity is expressed as the impossibility to perform an exact simultaneous determination of the system energy and temperature by using an experimental procedure based on the thermal equilibrium with other system regarded as a measuring apparatus (thermometer). In this work, we provide a simple generalization of the last approach with the consideration of a thermodynamic situation with several control parameters.
To understand in detail the relation between unitary quantum theory that describes our world at the microscopic scale and thermodynamics, which was long believed only to apply to macroscopic objects, is one of the most interesting and long-standing problems in physics. Recently, this problem has received renewed attention, in particular from the community of quantum information theory, but also from the field of statistical mechanics, inspired from stochastic thermodynamics. These results suggest that thermodynamics is also relevant for individual quantum systems, provided that they can be brought into contact with thermal baths. In this thesis, I use recently developed tools to provide new results both on fundamental questions, but also on questions which are of practical relevance for potential miniaturized thermal machines. In terms of fundamental questions, the results in this thesis contribute to understanding how the basic laws of thermodynamics and statistical mechanics can be understood directly from unitary quantum mechanics. In particular, I discuss and answer the following questions: i) How can we quantify the third law of thermodynamics using information theoretic methods? ii) How can we quantify the "thermodynamic value" of a state-transition in quantum systems? iii) How can we axiomatically characterize the non-equilibrium free energy and relative entropy? iv) How can we justify statistical ensembles from an operational perspective, without having to introduce either some probability measures or an information theoretic entropy measure? v) How can we understand the equilibration of closed quantum systems, how long does it take and how difficult is it to avoid? In the second part of the thesis I discuss in detail how experimental restrictions, which become important at the quantum scale, influence the ultimate thermodynamic bounds for thermal machines. In particular, the results in this thesis provide thermodynamic bounds on work-extraction and efficiencies of thermal machines in situations where 1.) an experimenter only has limited field strengths available, 2.) an experimenter cannot control the interactions between particles, but external fields arbitrarily well, and 3.) situations in which a small quantum system can only be strongly coupled to heat baths. These bounds are tight and I provide explicit examples illustrating the different behaviours. Finally, I come back to a classic problem in statistical physics: The emergence of spontaneous symmetry breaking. Here, I provide general and rigorous new results that show how symmetry-breaking stationary states emerge from fluctuations in order parameters in dissipative lattice models.
Abstract 1. In the general synthesis of classical dynamics with the quantum theory, the Uncertainty Principle plays a most useful part. It is of course only one aspect of the new mechanics, but it is a very helpful one since by its means it becomes easy to see where the old classical ideas broke down. The state of affairs in the quantum theory is not unlike that of the early days of relativity, when most of those who studied the subject felt the need of supporting the formal theory by seeing how the old ideas failed in specific cases. Here the formal theory is very abstract and is not easy to follow intuitively, and the Uncertainty Principle plays much the same rôle as did the examples of clocks and rods in relativity theory. For this reason it is more appropriate for illustrative examples, than for any extreme generality, and though a number of examples have been already given by Heisenberg and Bohr, it may not be amiss to have some more. There are probably some who will have shared my experience that it is often by no means easy to detect how the uncertainty enters into a given experiment, though once detected the arguments are usually very simple. In a recent conversation Professor Bohr criticised some rather careless remarks that I had made, and the present work was undertaken to clear matters up. It may be shortly described as a study of the Uncertainty Principle in connection with electrometers and magnetometers. It may be of interest to point out that the Uncertainty Principle can be regarded from a rather different aspect. The "resolving power" of optical instruments was discussed very fully by Rayleigh on wave principles, but as long as matter was regarded in the classical manner, a mechanical instrument could be considered as capable of measuring quantities with absolute accuracy. Now that we know that matter also has wave properties, there is need of a theory of the resolving power of mechanical instruments, and this is exactly what the Uncertainty Principle supplies.
Contrary to a wide-spread impression, the possibility of measuring an energy in a finite time without changing its initial value (E' =E0) is not in contradiction with the principles of quantum mechanics. The relation Δ(E'-E0)Δt≥ holds only in the case when the energy of interaction between the quantum system in question and the apparatus is a function of a coordinate of the system. The condition for a nonperturbing energy measurement is that the interaction energy H1, of the system and the apparatus depend on the energy operator E and that the operators Ĥ and E commute. It is also possible to have a nonperturbing measurement in which the error in measuring the energy is so small that ΔE/Δt. Measurement of the energy of a given system is accompanied by an increase in the uncertainty Δe of the energy of the apparatus. The error ΔE in the measurement of the system's energy and the perturbation Δeof the energy of the apparatus are connected by the relations (ΔE + Δe) Δt≥ and ΔE Δe≥(/2Δt)2.
A system, or a set of systems, is said to be in thermal equilibrium when no net flow of heat energy occurs between its constituent parts when they are connected by a path permeable to heat (a diathermal wall).1 This condition is the endpoint of a spontaneous process: if two bodies at different temperatures are brought into thermal contact, energy will flow from the higher-temperature object to the lower-temperature object until this flow ceases and the equilibrium state is achieved.3 Within a single system, thermal equilibrium is characterized by a temperature that is both spatially uniform (the same at all points) and temporally constant (unchanging over time).4 This uniformity of macroscopic properties—such as temperature and pressure—is what defines the state of the system.1 It is important to distinguish this from the broader state of thermodynamic equilibrium. Thermal equilibrium (uniform temperature) is a necessary component, but full thermodynamic equilibrium also requires mechanical equilibrium (uniform pressure) and diffusive equilibrium (uniform chemical potential).6 Systems can achieve thermal equilibrium without achieving full thermodynamic equilibrium.6 The Zeroth Law of Thermodynamics: The "Discovery" of Temperature The concept of temperature, while intuitive, requires a formal physical principle to exist as a measurable, fundamental property. This principle is the Zeroth Law of Thermodynamics. Although it was formulated and named after the First and Second Laws, its foundational role was recognized as a logical prerequisite for the entire structure of thermodynamics.8 The law states: If system A is in thermal equilibrium with system C, and system B is in thermal equilibrium with system C, then systems A and B are in thermal equilibrium with each other.1 In this construction, system C plays the role of a thermometer.13 The profound implication of this law is mathematical: it establishes thermal equilibrium as a transitive relation 9, or more formally, an equivalence relation.14 In mathematics, any equivalence relation partitioning a set of objects implies the existence of a common, scalar property shared by all members of a given equivalence class. The Zeroth Law thus proves the existence of a scalar function of state—a property we call temperature—that is common to all systems in mutual thermal equilibrium.9 The law is, therefore, the fundamental basis for defining temperature and building consistent, reproducible temperature scales.1 This axiomatic foundation also provides the logical origin for one of temperature's most critical characteristics: it is an intensive property. An intensive property is one that does not depend on the size or amount of the system.15 If a large system 'A' is in internal thermal equilibrium 6, any two parts of it, subsystems 'A1' and 'A2', must also be in thermal equilibrium with each other. By the Zeroth Law, a thermometer 'C' that is in thermal equilibrium with the whole system 'A' must also be in thermal equilibrium with 'A1' and 'A2' individually.13 The thermometer, therefore, gives the same reading for all three. This demonstrates that the temperature of a system in thermal equilibrium is the same as the temperature of any part of it.16
Abstract Thermodynamics was developed when it was still unclear whether the microworld had an atomic substructure. The objective here is to investigate the relationship between the process of a quantum measurement and the second law of thermodynamics. It is necessary to make the ideas of heat and work explicit in this approach. It is possible to study the correspondence between information entropy and thermodynamic entropy. Finally, a model is proposed in such a way as to resemble an experimental example for the discussion.