Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0908.4250 · Applied Physics Letters

Superconducting quantum interference device amplifiers with over 27 GHz of gain-bandwidth product operated in the 4–8 GHz frequency range

Lafe Spietz, K. D. Irwin, José Aumentado

Published Aug 31, 2009• 31 citations
arXivHTMLPDF

Abstract

We describe the performance of amplifiers in the 4–8 GHz range using direct current (dc) superconducting quantum interference devices (SQUIDs) in a lumped element configuration. We have used external impedance transformers to couple power into and out of the dc SQUIDs. By choosing appropriate values for coupling capacitors, resonator lengths and output component values, we have demonstrated useful gains in several frequency ranges with different bandwidths, showing over 27 GHz of power gain-bandwidth product. In this work, we describe our design for the 4–8 GHz range and present data demonstrating gain, bandwidth, dynamic range, and drift characteristics.

DOI
10.1063/1.3220061

Related papers

Input impedance and gain of a gigahertz amplifier using a dc superconducting quantum interference device in a quarter wave resonator

Lafe Spietz, K. D. Irwin, José Aumentado

Due to their superior noise performance, superconducting quantum interference devices (SQUIDs) are an attractive alternative to high electron mobility transistors for constructing ultra-low-noise microwave amplifiers for cryogenic use. We describe the use of a lumped element SQUID inductively coupled to a quarter wave resonator. The resonator acts as an impedance transformer and also makes it possible to accurately measure the input impedance and intrinsic microwave characteristics of the SQUID. We present a model for input impedance and gain, compare it to the measured scattering parameters, and describe how to use the model for the systematic design of low-noise microwave amplifiers with a wide range of performance characteristics.

arXiv:0806.2853•Applied Physics Letters•Aug 25, 2008•36 citations

Design and characterization of an SQUID microwave amplifier with impedance transformers

Junhao Hou, Liliang Ying, Wei 炜 Peng 彭 +2 more

Abstract High-performance cryogenic amplifiers are essential components for quantum information technology and astronomical observation. In this work, we report the design and characterization of a microwave amplifier based on a superconducting quantum interference device (SQUID). The design incorporates input and output impedance transformers to center the operating frequency at approximately 5.5 GHz for specific applications. Preliminary characterization at a bath temperature of 4.2 K demonstrates a peak gain of 10.79 dB at 5.39 GHz and a saturation power of approximately −115 dBm.

Chinese Physics B•Oct 28, 2025•0 citations

Current amplification with asymmetric direct current superconducting quantum interference devices at 77 K

R. Kleiner, D. Koelle, Frank Ludwig +3 more

One can use a direct current (dc) superconducting quantum interference device (SQUID) as a current amplifier by injecting a signal current Is into part of the superconducting loop and detecting the resultant change in critical current Ic. The current gain max ‖dIc/dIs‖ can be increased by making the inductances of the two arms of the SQUID asymmetric, thereby skewing the transfer function Ic vs Is. Detailed simulations of the device performance include an analysis of the impact of inductance and junction asymmetry on the transfer function. At 77 K a maximum current gain of 5 should be achievable albeit for frequencies below 1 GHz. An increase in the operating speed to 2 GHz can be achieved by reducing the gain to 2. We have fabricated asymmetric YBa2Cu3O7−x dc SQUIDs on SrTiO3 bicrystal substrates and operated them at 77 K. Using a second, readout SQUID to monitor changes in the critical current, we have achieved a low-frequency current gain up to 2.3. By coupling two SQUIDs together, we have increased the gain to 8.5.

Journal of Applied Physics•Jan 15, 1996•9 citations

A low-noise, two-stage DC SQUID amplifier with high bandwidth and dynamic range

R. Cantor, L. P. Lee, Andrei N. Matlashov +1 more

We describe a low-noise, two-stage dc Superconducting QUantum Interference Device (SQUID) amplifier that is designed for applications requiring high bandwidth and dynamic range. The output signal of a low-noise SQUID in the input stage coherently modulates a series array of identical SQUIDs in the output stage via a common modulation line. The input stage is designed so its output signal does not produce multiple modulation periods in the output stage. The output stage is designed to have sufficient gain so the output noise is dominated by the amplified noise of the input SQUID and exceeds the noise of a preamplifier in the room temperature readout electronics. The SQUID amplifier may therefore be operated without flux modulation or any impedance matching network, resulting in a large dynamic range and high bandwidth.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•11 citations

Superconducting quantum interference device amplifiers at gigahertz frequencies

Michael Mück, Christian Welzel, John L. Clarke

A series of five dc superconducting quantum interference devices (SQUIDs) have been operated as microstrip amplifiers at frequencies ranging from 2.2 to 7.4 GHz. In these devices, the signal is connected between the SQUID washer and coil, which acts as a microstrip resonator. The gain measured at 4.2 K ranged from 12±1 to 6±1 dB. The noise temperature of three devices at 4.2 K in the frequency range 2.2–4 GHz was between 1 and 2 K, and the saturation temperature was between 150 and 250 K. Applications of these devices include readout for axion detectors, and intermediate-frequency amplifiers for superconductor–insulator–superconductor and hot-electron bolometer mixers.

Applied Physics Letters•May 8, 2003•48 citations

Demonstration of SQUID (Superconducting QUantum Interference Device) parametric amplifier

Arnold H. Silver, R. Sandell, Reggie Phillips +1 more

This is the first Annual Report of an effort to demonstrate a low noise superconducting microwave amplifier. The amplifier is a nearly degenerate, single idler parametric amplifier which uses the nonlinear inductance of a single junction SQUID (Superconducting Quantum Interference Device). The design frequency is 9 GHz, 10 dB gain, and 16% bandwidth. In order to maximize the saturation power, the device impedance was chosen near 1ohm and a matching network was designed to transform to 50ohm. In later designs, a coherent array of SQUIDs is expected to increase the power and impedance. This report includes the design and test of the 50ohm to 1ohm broadband transformer, design and fabrication of the SQUID amplifier, and both saturation and noise analyses of the single SQUID and SQUID array. The analytical results, reported to the 1982 Applied Superconductivity Conference are: the noise temperature of the single SQUID parametric amplifier is equal to the amplifier termination temperature T(o), the response is linear to several percent of the flux quantum energy in the SQUID: the amplifier will be saturated by broad band noise if the noise source temperature is much greater than 10 To; and the array parametric amplifier has the same noise temperature as the single device indicating an N-fold increase in dynamic range. (Author)

Annual Report•Nov 1, 1982•0 citations
We describe the performance of amplifiers in the 4–8 GHz range using direct current (dc) superconducting quantum interference devices (SQUIDs) in a lumped element configuration. We have used external impedance transformers to couple power into and out of the dc SQUIDs. By choosing appropriate values for coupling capacitors, resonator lengths and output component values, we have demonstrated useful gains in several frequency ranges with different bandwidths, showing over 27 GHz of power gain-bandwidth product. In this work, we describe our design for the 4–8 GHz range and present data demonstrating gain, bandwidth, dynamic range, and drift characteristics.
Due to their superior noise performance, superconducting quantum interference devices (SQUIDs) are an attractive alternative to high electron mobility transistors for constructing ultra-low-noise microwave amplifiers for cryogenic use. We describe the use of a lumped element SQUID inductively coupled to a quarter wave resonator. The resonator acts as an impedance transformer and also makes it possible to accurately measure the input impedance and intrinsic microwave characteristics of the SQUID. We present a model for input impedance and gain, compare it to the measured scattering parameters, and describe how to use the model for the systematic design of low-noise microwave amplifiers with a wide range of performance characteristics.
Abstract High-performance cryogenic amplifiers are essential components for quantum information technology and astronomical observation. In this work, we report the design and characterization of a microwave amplifier based on a superconducting quantum interference device (SQUID). The design incorporates input and output impedance transformers to center the operating frequency at approximately 5.5 GHz for specific applications. Preliminary characterization at a bath temperature of 4.2 K demonstrates a peak gain of 10.79 dB at 5.39 GHz and a saturation power of approximately −115 dBm.
One can use a direct current (dc) superconducting quantum interference device (SQUID) as a current amplifier by injecting a signal current Is into part of the superconducting loop and detecting the resultant change in critical current Ic. The current gain max ‖dIc/dIs‖ can be increased by making the inductances of the two arms of the SQUID asymmetric, thereby skewing the transfer function Ic vs Is. Detailed simulations of the device performance include an analysis of the impact of inductance and junction asymmetry on the transfer function. At 77 K a maximum current gain of 5 should be achievable albeit for frequencies below 1 GHz. An increase in the operating speed to 2 GHz can be achieved by reducing the gain to 2. We have fabricated asymmetric YBa2Cu3O7−x dc SQUIDs on SrTiO3 bicrystal substrates and operated them at 77 K. Using a second, readout SQUID to monitor changes in the critical current, we have achieved a low-frequency current gain up to 2.3. By coupling two SQUIDs together, we have increased the gain to 8.5.
We describe a low-noise, two-stage dc Superconducting QUantum Interference Device (SQUID) amplifier that is designed for applications requiring high bandwidth and dynamic range. The output signal of a low-noise SQUID in the input stage coherently modulates a series array of identical SQUIDs in the output stage via a common modulation line. The input stage is designed so its output signal does not produce multiple modulation periods in the output stage. The output stage is designed to have sufficient gain so the output noise is dominated by the amplified noise of the input SQUID and exceeds the noise of a preamplifier in the room temperature readout electronics. The SQUID amplifier may therefore be operated without flux modulation or any impedance matching network, resulting in a large dynamic range and high bandwidth.
A series of five dc superconducting quantum interference devices (SQUIDs) have been operated as microstrip amplifiers at frequencies ranging from 2.2 to 7.4 GHz. In these devices, the signal is connected between the SQUID washer and coil, which acts as a microstrip resonator. The gain measured at 4.2 K ranged from 12±1 to 6±1 dB. The noise temperature of three devices at 4.2 K in the frequency range 2.2–4 GHz was between 1 and 2 K, and the saturation temperature was between 150 and 250 K. Applications of these devices include readout for axion detectors, and intermediate-frequency amplifiers for superconductor–insulator–superconductor and hot-electron bolometer mixers.
This is the first Annual Report of an effort to demonstrate a low noise superconducting microwave amplifier. The amplifier is a nearly degenerate, single idler parametric amplifier which uses the nonlinear inductance of a single junction SQUID (Superconducting Quantum Interference Device). The design frequency is 9 GHz, 10 dB gain, and 16% bandwidth. In order to maximize the saturation power, the device impedance was chosen near 1ohm and a matching network was designed to transform to 50ohm. In later designs, a coherent array of SQUIDs is expected to increase the power and impedance. This report includes the design and test of the 50ohm to 1ohm broadband transformer, design and fabrication of the SQUID amplifier, and both saturation and noise analyses of the single SQUID and SQUID array. The analytical results, reported to the 1982 Applied Superconductivity Conference are: the noise temperature of the single SQUID parametric amplifier is equal to the amplifier termination temperature T(o), the response is linear to several percent of the flux quantum energy in the SQUID: the amplifier will be saturated by broad band noise if the noise source temperature is much greater than 10 To; and the array parametric amplifier has the same noise temperature as the single device indicating an N-fold increase in dynamic range. (Author)