There has been much interest in developing methods for transferring quantum information. We discuss a way to transfer quantum information between two trapped ions through a wire. The motion of a trapped ion induces oscillating charges in the trap electrodes. By sending this current to the electrodes of a nearby second trap, the motions of ions in the two traps are coupled. We investigate the electrostatics of a setup where two separately trapped ions are coupled through an electrically floating wire. We also discuss experimental issues, including possible sources of decoherence.
There has been much interest in developing methods for transferring quantum information. We discuss a way to transfer quantum information between two trapped ions through a wire. The motion of a trapped ion induces oscillating charges in the trap electrodes. By sending this current to the electrodes of a nearby second trap, the motions of ions in the two traps are coupled. We investigate the electrostatics of a setup where two separately trapped ions are coupled through an electrically floating wire. We also discuss experimental issues, including possible sources of decoherence.
A semi-classical analysis of the coupling strength γ between motional quantum states of spatially distant trapped ions interacting via a conducting wire
Interfacing ion qubits in separate traps is among the challenges towards scaling up trapped ion quantum computing. This theoretical study focuses on using a conducting wire to couple the motional quantum states of ions in separate planar traps. The approach of interfacing ion traps provides an alternative to coupling distant qubits with lasers or via ion shuttling. We develop a detailed model for the coupling strength γ, which in turn allows us to calculate the time required to exchange motional quantum states between two ions, tex.. To maximize the coupling strength γ, a rule of thumb is developed to relate the distance deq. between a trapped ion and a nearby pickup disk, to the optimal radius ropt. of the disk, deq./2≤ropt.≤deq.. We include a coefficient ζ which describes three self-capacitances connected in series, relating the capacitances of each part of the coupling system, which corrects an oversight common to several previous works. Our analytical model for the coupling strength is then compared with other existing analytical models in the literature. This requires a standardization of the coupling systems and mapping them to a common set of parameter values. Similarities, differences and limitations of the various models are discussed. This study's focus on the coupling strength γ and tex. provides a foundational pillar for exchanging quantum information between trapped ions via a wire. In addition, many insights are general and apply broadly to hybrid systems interfacing trapped ions with nearby conductors.
We demonstrate coupling between the motions of two independently trapped ions with a separation distance of 620 μm. The ion-ion interaction is enhanced via a room-temperature electrically floating metallic wire which connects two surface traps. Tuning the motion of both ions into resonance, we show flow of energy with a coupling rate of 11 Hz. Quantum-coherent coupling is hindered by strong surface electric-field noise in our device. Our ion-wire-ion system demonstrates that room-temperature conductors can be used to mediate and tune interactions between independently trapped charges over distances beyond those achievable with free-space dipole-dipole coupling. This technology may be used to sympathetically cool or entangle remotely trapped charges and enable coupling between disparate physical systems.
Two electrons in planar Penning traps can be coupled by connecting the trap electrodes with a metallic wire. The wire provides a capacitive and resistive link between the image charges that the electron oscillation (axial motion) is inducing in the electrodes. This can be operated as a quantum network to transfer excitation quanta between the traps and to entangle the two electrons. We give a detailed analysis of this system in the dispersive limit and assess the impact of resistive thermal noise. The latter is found to be remarkably small at temperatures below 4 K in miniaturized planar traps (sizes below 1 mm). The master equation for the two-electron system in the presence of resistive noise is solved exactly. We compute fidelities for basic quantum gates needed in quantum information processing.
Quantum information science promises a host of new and useful applications in communication, simulation, and computational algorithms. Trapped atomic ions are one of the leading physical systems with potential to implement a large-scale quantum information system, but many challenges still remain. This thesis describes some experimental approaches to address several such challenges broadly organized under three themes: gates, sensors, and systems. Quantum logic gates are the fundamental building blocks for quantum algorithms. Although they have been demonstrated with trapped ions previously, scalability requires miniaturizing ion traps by using a surface-electrode geometry. Using a single ion in a surface-electrode trap, we perform a two-qubit entangling gate and fully characterize it via quantum process tomography, as an initial validation of surface-electrode ion traps for quantum information processing. Good logic gates are often good sensors for fast fluctuations and energy changes in their environment. Trapped ions are sensitive to fluctuating and static charges, leading to motional state decoherence (heating) and instabilities, problems exacerbated by the surface-electrode geometry. We investigate the material dependence of heating, specifically with aluminum and superconducting traps, to elucidate the physical origin of these fluctuating charges. Static charging is hypothesized to be caused by the trapping and cooling lasers due to the photoelectric effect. We perform systematic experiments with aluminum, gold, and copper traps with lasers at various wavelengths to validate this hypothesis. Realizing quantum processors at the system level requires models and tools for predicting system performance, demonstration of good classical and quantum control, and techniques for integrating different quantum systems. We develop a modeling system for trapped ion quantum computing experiments and simulate the effect of physical and technical noise sources on practical realizations of quantum algorithms in a trapped ion system. We experimentally demonstrate several such algorithms, including the quantum Fourier transform, order-finding, and Shor's algorithm on up to 5 ions. These experiments highlight several unique advantages of ion trap systems and help identify needs for further development. Finally, we explore the integration of ion traps with optical elements including mirrors and photon detectors as key elements in creating future hybrid quantum systems.
Trapped charged particles, and in particular trapped ions, are among the leading candidates for quantum computing technologies. However, our ability to interconnect arrays of ions in different traps is a significant hurdle in scaling trapped ion quantum computing. One approach to overcome this problem is using a solid state conducting wire to mediate the Coulomb interaction between particles in different traps. Additionally, there is strong interest in interfacing trapped ion qubits with solid state superconducting qubits to develop hybrid systems which benefit from the complementary strengths of the two technologies. For studies related to these fields, a trapped charged particle inducing charge on a conductor has long been modeled using equivalent circuit elements. The equivalent circuit element approach is popular partly due to the appeal of a model for analyzing systems using simple electronic components. As a result, a body of theoretical work is founded on this approach. However, careful consideration of the model leads to inconsistencies. Here, we identify the origin of the inconsistencies and their implications. Our result removes a potential road-block for future studies aiming to use conductors to connect independent arrays of ions, or to interface charged particles with solid-state qubit technologies. In addition, for the specific case of two trapped ions interacting via a conducting coupling system, we introduce an alternative way to use linear relationships, which reproduces results from other works that are not based on the circuit element model. This method is useful in trouble-shooting real experimental designs and assessing the accuracy of different theoretical models.