Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0903.3482 · Applied Physics Letters

Experimental investigation of hybrid single-electron turnstiles with high charging energy

A. Kemppinen, S. Kafanov, Yu. A. Pashkin, J. S. Tsai, D. V. Averin, J. P. Pekola

Published Apr 27, 2009• 39 citations
arXivHTMLPDF

Abstract

We present an experimental study of hybrid turnstiles with high charging energies in comparison to the superconducting gap. The device is modeled with the sequential tunneling approximation. The backtunneling effect is shown to limit the amplitude of the gate drive and thereby the maximum pumped current of the turnstile. We compare results obtained with sine and square wave drive and show how a fast rise time can suppress errors due to leakage current. Quantized current plateaus up to 160 pA are demonstrated.

DOI
10.1063/1.3127229

Related papers

Hybrid single-electron turnstile - Towards a quantum standard of electric current

Jukka P Pekola, D. V. Averin, Sergey G. Kafanov +9 more

First I discuss various candidates of single-electron current pumps for quantum metrology. Then I focus on the hybrid normal-metal-superconductor turnstile in the form of a one-island single-electron transistor with one gate. The device demonstrates robust current plateaus at multiple levels of ef at frequency f. I discuss the various error mechanisms, based on our experiments and theoretical considerations. Ultimately the quantization accuracy is expected to be limited by either two-electron tunneling or by Cooper-pair-electron co-tunneling. We predict that it should be possible to achieve the metrological accuracy of 10-8, while maintaining the quantized current on the level of more than 10 pA, just by one turnstile with realistic parameters using aluminium as a superconductor. Recently we have managed to run ten turnstiles in parallel increasing the current level to above 100 pA. Work on suppressing the harmful sub-gap leakage current is in progress with encouraging experimental results.

Conference on Precision Electromagnetic Measurements•Jun 1, 2010•1 citation

Andreev tunneling in charge pumping with SINIS turnstiles

Thomas Aref, V. F. Maisi, M. Gustafsson +2 more

We present measurements on hybrid single-electron turnstiles with superconducting leads contacting a normal island (SINIS). We observe Andreev tunneling of electrons influencing the current plateau characteristics of the turnstiles under radio-frequency pumping. The data is well accounted for by numerical simulations. We verify the dependence of the Andreev tunneling rate on the turnstile's charging energy. Increasing the charging energy effectively suppresses the Andreev current.

arXiv:1106.3918•Europhysics Letters (EPL)•Oct 13, 2011•24 citations

Superconducting Single-Electron Transistor as a 3e-Cotunneling Turnstile

S. V. Lotkhov

In a superconducting single-electron transistor (SSET), we demonstrate a charge turnstile regime based on higher-order tunneling as a major transport mechanism. In this regime, the quantized current appears as a sequence of Cooper pair-electron cotunneling events cycled by a periodic gate signal and transferring a discrete three-electron charge per cycle. Operating as a relatively slow, higher-order tunneling system, the 3e-turnstile exhibits stable current plateaus in the sub-pA range. The device could be useful for generating precise ultralow currents as well as for experimental evaluation of cotunneling error rates in electron turnstiles.

Conference on Precision Electromagnetic Measurements•Jul 1, 2018•1 citation

Nonadiabatic Charge Pumping in a Hybrid Single-Electron Transistor

D. V. Averin, Jukka P Pekola

We study theoretically current quantization in the charge turnstile based on the superconductor-normal-metal single-electron transistor. The quantization accuracy is limited by either Andreev reflection or by Cooper-pair-electron cotunneling. The rates of these processes are calculated in the "above-the-threshold" regime when they compete directly with the lowest-order tunneling. By shaping the ac gate voltage drive it should be possible to achieve the metrological accuracy of 10;{-8}, while maintaining the quantized current on the level of 30 pA, just by one turnstile with realistic parameters using aluminum as a superconductor.

arXiv:0802.1364•Physical Review Letters•Aug 4, 2008•81 citations

Suppression of Back-Tunneling Events in Hybrid Single-Electron Turnstiles by Source-Drain Bias Modulation

Marco Marín‐Suárez, Yu. A. Pashkin, Joonas T. Peltonen +1 more

The accuracy of single-electron currents produced in hybrid turnstiles at high operation frequencies is, among other errors, limited by electrons tunneling in the wrong direction. Increasing the barrier transparency between the island and the leads, together with the source-drain bias, helps to suppress these events in a larger frequency range, although they lead to some additional errors. We experimentally demonstrate a driving scheme that suppresses tunneling in the wrong direction, thus extending the range of frequencies for generating accurate single-electron currents. The main feature of this approach is an additional ac signal applied to the bias with frequency twice that applied to the gate electrode. This allows additional modulation of the island chemical potential. By using this approach under certain parameters, we improve the single-electron current accuracy by one order of magnitude. Finally, we show through experimentally contrasted calculations that our method can improve accuracy even in devices for which the usual gate driving gives errors of the order of ${10}^{\ensuremath{-}3}$ at high frequencies and can bring them under $5\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}4}$.

arXiv:2207.01953•Physical Review Applied•Apr 27, 2023•3 citations

Ultimate error detection circuit for the hybrid electron turnstiles

S. V. Lotkhov, Alexander B Zorin

In order to study error mechanisms in the hybrid superconductor-normal metal turnstiles, we implemented a single-electron device, based on such a turnstile, connected in series to a high-ohmic resistor and terminated by an electron trapping node, coupled capacitively to a single-electron electrometer. This layout brings an advantage, on a single-electron level both to quantify the leakage rates in the dc mode, and to model the pumping regime with the aid of an electron shuttling experiment.

Conference on Precision Electromagnetic Measurements•Jun 1, 2010•0 citations
We present an experimental study of hybrid turnstiles with high charging energies in comparison to the superconducting gap. The device is modeled with the sequential tunneling approximation. The backtunneling effect is shown to limit the amplitude of the gate drive and thereby the maximum pumped current of the turnstile. We compare results obtained with sine and square wave drive and show how a fast rise time can suppress errors due to leakage current. Quantized current plateaus up to 160 pA are demonstrated.
First I discuss various candidates of single-electron current pumps for quantum metrology. Then I focus on the hybrid normal-metal-superconductor turnstile in the form of a one-island single-electron transistor with one gate. The device demonstrates robust current plateaus at multiple levels of ef at frequency f. I discuss the various error mechanisms, based on our experiments and theoretical considerations. Ultimately the quantization accuracy is expected to be limited by either two-electron tunneling or by Cooper-pair-electron co-tunneling. We predict that it should be possible to achieve the metrological accuracy of 10-8, while maintaining the quantized current on the level of more than 10 pA, just by one turnstile with realistic parameters using aluminium as a superconductor. Recently we have managed to run ten turnstiles in parallel increasing the current level to above 100 pA. Work on suppressing the harmful sub-gap leakage current is in progress with encouraging experimental results.
In a superconducting single-electron transistor (SSET), we demonstrate a charge turnstile regime based on higher-order tunneling as a major transport mechanism. In this regime, the quantized current appears as a sequence of Cooper pair-electron cotunneling events cycled by a periodic gate signal and transferring a discrete three-electron charge per cycle. Operating as a relatively slow, higher-order tunneling system, the 3e-turnstile exhibits stable current plateaus in the sub-pA range. The device could be useful for generating precise ultralow currents as well as for experimental evaluation of cotunneling error rates in electron turnstiles.
We study theoretically current quantization in the charge turnstile based on the superconductor-normal-metal single-electron transistor. The quantization accuracy is limited by either Andreev reflection or by Cooper-pair-electron cotunneling. The rates of these processes are calculated in the "above-the-threshold" regime when they compete directly with the lowest-order tunneling. By shaping the ac gate voltage drive it should be possible to achieve the metrological accuracy of 10;{-8}, while maintaining the quantized current on the level of 30 pA, just by one turnstile with realistic parameters using aluminum as a superconductor.
The accuracy of single-electron currents produced in hybrid turnstiles at high operation frequencies is, among other errors, limited by electrons tunneling in the wrong direction. Increasing the barrier transparency between the island and the leads, together with the source-drain bias, helps to suppress these events in a larger frequency range, although they lead to some additional errors. We experimentally demonstrate a driving scheme that suppresses tunneling in the wrong direction, thus extending the range of frequencies for generating accurate single-electron currents. The main feature of this approach is an additional ac signal applied to the bias with frequency twice that applied to the gate electrode. This allows additional modulation of the island chemical potential. By using this approach under certain parameters, we improve the single-electron current accuracy by one order of magnitude. Finally, we show through experimentally contrasted calculations that our method can improve accuracy even in devices for which the usual gate driving gives errors of the order of ${10}^{\ensuremath{-}3}$ at high frequencies and can bring them under $5\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}4}$.