Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0903.3425 · Journal of Modern Optics

Optimised focusing ion optics for an ultracold deterministic single ion source targeting nm resolution

Robert Fickler, Wolfgang Schnitzler, Norbert M. Linke, Ferdinand Schmidt‐Kaler, Kilian Singer

Published Aug 19, 2009• 5 citations
arXivHTMLPDF

Abstract

Using a segmented ion trap with mK laser-cooled ions we have realised a novel single ion source which can deterministically deliver a wide range of ion species, isotopes or ionic molecules [Schnitzler et al. Phys. Rev. Lett. 2009, 102, 070501]. Experimental data is discussed in detail and compared with numerical simulations of ion trajectories. For the novel ion source we numerically investigate the influence of various extraction parameters on fluctuations in velocity and position of the beam. We present specialised ion optics and show from numerical simulations that a nm spatial resolution is achievable. The Paul trap, which is used as a single ion source, together with the presented ion optics, constitutes a promising candidate for a deterministic ion implantation method for applications in solid state quantum computing or classical nano-electronic devices.

DOI
10.1080/09500340903180509

Related papers

Deterministic Ultracold Ion Source Targeting the Heisenberg Limit

Wolfgang Schnitzler, Norbert M. Linke, Robert Fickler +3 more

The major challenges to fabricate quantum processors and future nano-solid-state devices are material modification techniques with nanometer resolution and suppression of statistical fluctuations of dopants or qubit carriers. Based on a segmented ion trap with mK laser-cooled ions we have realized a deterministic single-ion source which could operate with a huge range of sympathetically cooled ion species, isotopes or ionic molecules. We have deterministically extracted a predetermined number of ions on demand and have measured a longitudinal velocity uncertainty of 6.3 m/s and a spatial beam divergence of 600 microrad. We show in numerical simulations that if the ions are cooled to the motional ground state (Heisenberg limit) nanometer spatial resolution can be achieved.

arXiv:0902.0456•Physical Review Letters•Feb 19, 2009•75 citations

Development of Ultrahigh-precision Ion Implantation System Connected with Laser-cooled Ion Source

Onoda Shinobu, Hosaka Koichi, Seiji Hosoya +9 more

Nitrogen-vacancy (NV) centers in diamond are gaining attention as room-temperature quantum bits, with potential applications in quantum sensing, quantum information processing, and quantum communication. Precise positioning of NV centers is crucial for creating efficient single-photon sources using optical resonators and quantum memories for quantum interface, etc. Generally, broad ion beam implantation through nanohole fabricated by electron beam lithography has been widely used for precise creation of NV centers. There are several reports of deterministic NV creation by using pulsed fs- or ps-laser irradiations. In addition, focusing ion beam implantation provides a route towards scalable quantum information processing. In this study, we are developing an inherently deterministic single-ion implantation method based on a linear Paul trap (LPT) as a single-ion source, since the laser-cooling technique can be applied to the trap system to obtain ultralow-emittance ions and manipulate single ions one by one.

•May 12, 2025•0 citations

A high repetition deterministic single ion source

C Sahin, Philipp Geppert, A. Müllers +1 more

We report on a deterministic single ion source with high repetition rate and high fidelity. The source employs a magneto-optical trap, where ultracold rubidium atoms are photoionized. The electrons herald the creation of a corresponding ion, whose timing information is used to manipulate its trajectory in flight. We demonstrate an ion rate of up to and achieve a fidelity for single ion operation of 98%. The technique can be used for all atomic species, which can be laser-cooled, and opens up new applications in ion microscopy, ion implantation and surface spectroscopy.

arXiv:1708.06920•New Journal of Physics•Oct 18, 2017•13 citations

Research and Development of an Ultrahigh Precision Single Ion Implanter

Yosuke Yuri, Kouichi Hosaka, Nobumasa Miyawaki +9 more

Ion implantation is an accelerator technology essential for creating defects or introducing impurities into materials. A research and development study is currently underway at QST Takasaki Institute toward ultrahigh-precision single-ion implantation based on laser-cooling techniques. To achieve this, we incorporate a linear Paul trap as an ultracold single-ion source, where trapped ions can be cooled to the order of mK or even “Coulomb-crystallized” by Doppler laser cooling. In our scheme, N or Si ions, useful for ion implantation to create color centers, are sympathetically cooled down to the mK range through Coulomb collisions by co-trapping them with laser-cooled Ca ions. Then, the ions are extracted selectively from the trap to be accelerated and focused through a 50-kV electrostatic bipotential lens system. We aim to focus the ions on the order of 10 nm for ultrahigh-precision implantation. The implantation system has already been assembled, and the commissioning is currently underway to enable ion extraction using a Coulomb crystal and focusing extracted cold ions. We present the status of system development and outline the scheme for selective ion extraction and nanobeam focusing based on multiparticle simulations.

JACOW•Nov 28, 2025•0 citations

Development of Ultrahigh-precision Ion Implantation System Based on Laser-cooled Ion Source

Hosaka Koichi, Seiji Hosoya, Kashiwagi Hirotsugu +9 more

Nitrogen-vacancy (NV) centers in diamond are gaining attention as room-temperature quantum bits, with potential applications in quantum sensing, quantum information processing, and quantum communication. Precise positioning of NV centers is crucial for creating efficient single-photon sources using optical resonators and quantum memories for quantum interface, etc. Generally, broad ion beam implantation through nanohole fabricated by electron beam lithography has been widely used for precise creation of NV centers. There are several reports of deterministic NV creation by using pulsed fs- or ps-laser irradiations. In addition, focusing ion beam implantation provides a route towards scalable quantum information processing [3-6]. In this study, we are developing an inherently deterministic single-ion implantation method based on a linear Paul trap (LPT) as a single-ion source, since the laser-cooling technique can be applied to the trap system to obtain ultralow-emittance ions and manipulate single ions one by one. The QST system uses doubly charged ions cooled with calcium ions, allowing 100 keV ion implantation in diamond.

•Jul 29, 2025•0 citations

Transmission Microscopy with Nanometer Resolution Using a Deterministic Single Ion Source

Georg Jacob, Karin Groot-Berning, Sebastian Wolf +6 more

We realize a single particle microscope by using deterministically extracted laser-cooled ^{40}Ca^{+} ions from a Paul trap as probe particles for transmission imaging. We demonstrate focusing of the ions to a spot size of 5.8±1.0 nm and a minimum two-sample deviation of the beam position of 1.5 nm in the focal plane. The deterministic source, even when used in combination with an imperfect detector, gives rise to a fivefold increase in the signal-to-noise ratio as compared with conventional Poissonian sources. Gating of the detector signal by the extraction event suppresses dark counts by 6 orders of magnitude. We implement a Bayes experimental design approach to microscopy in order to maximize the gain in spatial information. We demonstrate this method by determining the position of a 1 μm circular hole structure to a precision of 2.7 nm using only 579 probe particles.

arXiv:1512.00347•Physical Review Letters•Jul 20, 2016•58 citations
Using a segmented ion trap with mK laser-cooled ions we have realised a novel single ion source which can deterministically deliver a wide range of ion species, isotopes or ionic molecules [Schnitzler et al. Phys. Rev. Lett. 2009, 102, 070501]. Experimental data is discussed in detail and compared with numerical simulations of ion trajectories. For the novel ion source we numerically investigate the influence of various extraction parameters on fluctuations in velocity and position of the beam. We present specialised ion optics and show from numerical simulations that a nm spatial resolution is achievable. The Paul trap, which is used as a single ion source, together with the presented ion optics, constitutes a promising candidate for a deterministic ion implantation method for applications in solid state quantum computing or classical nano-electronic devices.
The major challenges to fabricate quantum processors and future nano-solid-state devices are material modification techniques with nanometer resolution and suppression of statistical fluctuations of dopants or qubit carriers. Based on a segmented ion trap with mK laser-cooled ions we have realized a deterministic single-ion source which could operate with a huge range of sympathetically cooled ion species, isotopes or ionic molecules. We have deterministically extracted a predetermined number of ions on demand and have measured a longitudinal velocity uncertainty of 6.3 m/s and a spatial beam divergence of 600 microrad. We show in numerical simulations that if the ions are cooled to the motional ground state (Heisenberg limit) nanometer spatial resolution can be achieved.
Nitrogen-vacancy (NV) centers in diamond are gaining attention as room-temperature quantum bits, with potential applications in quantum sensing, quantum information processing, and quantum communication. Precise positioning of NV centers is crucial for creating efficient single-photon sources using optical resonators and quantum memories for quantum interface, etc. Generally, broad ion beam implantation through nanohole fabricated by electron beam lithography has been widely used for precise creation of NV centers. There are several reports of deterministic NV creation by using pulsed fs- or ps-laser irradiations. In addition, focusing ion beam implantation provides a route towards scalable quantum information processing. In this study, we are developing an inherently deterministic single-ion implantation method based on a linear Paul trap (LPT) as a single-ion source, since the laser-cooling technique can be applied to the trap system to obtain ultralow-emittance ions and manipulate single ions one by one.
We report on a deterministic single ion source with high repetition rate and high fidelity. The source employs a magneto-optical trap, where ultracold rubidium atoms are photoionized. The electrons herald the creation of a corresponding ion, whose timing information is used to manipulate its trajectory in flight. We demonstrate an ion rate of up to and achieve a fidelity for single ion operation of 98%. The technique can be used for all atomic species, which can be laser-cooled, and opens up new applications in ion microscopy, ion implantation and surface spectroscopy.
Ion implantation is an accelerator technology essential for creating defects or introducing impurities into materials. A research and development study is currently underway at QST Takasaki Institute toward ultrahigh-precision single-ion implantation based on laser-cooling techniques. To achieve this, we incorporate a linear Paul trap as an ultracold single-ion source, where trapped ions can be cooled to the order of mK or even “Coulomb-crystallized” by Doppler laser cooling. In our scheme, N or Si ions, useful for ion implantation to create color centers, are sympathetically cooled down to the mK range through Coulomb collisions by co-trapping them with laser-cooled Ca ions. Then, the ions are extracted selectively from the trap to be accelerated and focused through a 50-kV electrostatic bipotential lens system. We aim to focus the ions on the order of 10 nm for ultrahigh-precision implantation. The implantation system has already been assembled, and the commissioning is currently underway to enable ion extraction using a Coulomb crystal and focusing extracted cold ions. We present the status of system development and outline the scheme for selective ion extraction and nanobeam focusing based on multiparticle simulations.
Nitrogen-vacancy (NV) centers in diamond are gaining attention as room-temperature quantum bits, with potential applications in quantum sensing, quantum information processing, and quantum communication. Precise positioning of NV centers is crucial for creating efficient single-photon sources using optical resonators and quantum memories for quantum interface, etc. Generally, broad ion beam implantation through nanohole fabricated by electron beam lithography has been widely used for precise creation of NV centers. There are several reports of deterministic NV creation by using pulsed fs- or ps-laser irradiations. In addition, focusing ion beam implantation provides a route towards scalable quantum information processing [3-6]. In this study, we are developing an inherently deterministic single-ion implantation method based on a linear Paul trap (LPT) as a single-ion source, since the laser-cooling technique can be applied to the trap system to obtain ultralow-emittance ions and manipulate single ions one by one. The QST system uses doubly charged ions cooled with calcium ions, allowing 100 keV ion implantation in diamond.
We realize a single particle microscope by using deterministically extracted laser-cooled ^{40}Ca^{+} ions from a Paul trap as probe particles for transmission imaging. We demonstrate focusing of the ions to a spot size of 5.8±1.0 nm and a minimum two-sample deviation of the beam position of 1.5 nm in the focal plane. The deterministic source, even when used in combination with an imperfect detector, gives rise to a fivefold increase in the signal-to-noise ratio as compared with conventional Poissonian sources. Gating of the detector signal by the extraction event suppresses dark counts by 6 orders of magnitude. We implement a Bayes experimental design approach to microscopy in order to maximize the gain in spatial information. We demonstrate this method by determining the position of a 1 μm circular hole structure to a precision of 2.7 nm using only 579 probe particles.