Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0808.0102 · Physical Review A

Local temperature in quantum thermal states

Artur García-Sáez, Alessandro Ferraro, Antonio Acín

Published May 28, 2009• 24 citations
arXivHTMLPDF

Abstract

We consider blocks of quantum spins in a chain at thermal equilibrium, focusing on their properties from a thermodynamical perspective. In a classical system the temperature behaves as an intensive magnitude, above a certain block size, regardless of the actual value of the temperature itself. However, a deviation from this behavior is expected in quantum systems. In particular, we see that under some conditions the description of the blocks as thermal states with the same global temperature as the whole chain fails. We analyze this issue by employing the quantum fidelity as a figure of merit, singling out in detail the departure from the classical behavior. As it may be expected, we see that quantum features are more prominent at low temperatures and are affected by the presence of zero-temperature quantum phase transitions. Interestingly, we show that the blocks can be considered indeed as thermal states with a high fidelity, provided an effective local temperature is properly identified. Such a result may originate from typical properties of reduced subsystems of energy-constrained Hilbert spaces. Finally, the relation between local and global temperatures is analyzed as a function of the size of the blocks and the system parameters.

DOI
10.1103/physreva.79.052340

Related papers

Local versus global thermal states: Correlations and the existence of local temperatures

Michael J. Hartmann, Günter Mahler A, Ortwin G. Hess

We consider a quantum system consisting of a regular chain of elementary subsystems with nearest neighbor interactions and assume that the total system is in a canonical state with temperature T . We analyze under what condition the state factors into a product of canonical density matrices with respect to groups of n subsystems each, and when these groups have the same temperature T. While in classical mechanics the validity of this procedure only depends on the size of the groups n, in quantum mechanics the minimum group size n(min) also depends on the temperature T! As examples, we apply our analysis to a harmonic chain and different types of Ising spin chains. We discuss various features that show up due to the characteristics of the models considered. For the harmonic chain, which successfully describes thermal properties of insulating solids, our approach gives a quantitative estimate of the minimal length scale on which temperature can exist: This length scale is found to be constant for temperatures above the Debye temperature and proportional to T-3 below.

arXiv:quant-ph/0404164•Physical Review E•Dec 30, 2004•41 citations

Locality of temperature and correlations in the presence of non-zero-temperature phase transitions

Senaida Hernández-Santana, András Molnár, Christian Gogolin +2 more

Abstract While temperature is well understood as an intensive quantity in standard thermodynamics, it is less clear whether the same holds in quantum systems displaying correlations with no classical analogue. The problem lies in the fact that, under the presence of non-classical correlations, subsystems of a system in thermal equilibrium are, in general, not described by a thermal state at the same temperature as the global system and thus one cannot simply assign a local temperature to them. However, there have been identified situations in which correlations in thermal states decay sufficiently fast so that the state of their subsystems can be very well approximated by the reduced states of equilibrium systems that are only slightly bigger than the subsystems themselves, hence allowing for a valid local definition of temperature. In this work, we address the question of whether temperature is locally well defined for a bosonic system with local interactions that undergoes a phase transition at non-zero temperature. We consider a three-dimensional bosonic model in the grand canonical state and verify that a certain form of locality of temperature holds regardless of the temperature, and despite the presence of infinite-range correlations at and below the critical temperature of the phase transition.

arXiv:2010.15256•New Journal of Physics•Jul 1, 2021•3 citations

Intensive temperature and quantum correlations for refined quantum measurements

Alessandro Ferraro, Artur García-Sáez, Antonio Acín

We consider the concept of temperature in a setting beyond the standard thermodynamics prescriptions. Namely, rather than restricting to standard coarse-grained measurements, we consider observers able to master any possible quantum measurement —a scenario that might be relevant at nanoscopic scales. In this setting, we focus on quantum systems of coupled harmonic oscillators and study the question of whether the temperature is an intensive quantity, in the sense that a block of a thermal state can be approximated by an effective thermal state at the same temperature as the whole system. Using the quantum fidelity as figure of merit, we identify instances in which this approximation is not valid, as the block state and the reference thermal state are distinguishable for refined measurements. Actually, there are situations in which this distinguishability even increases with the block size. However, we also show that the two states do become less distinguishable with the block size for coarse-grained measurements —thus recovering the standard picture. We then go further and construct an effective thermal state which provides a good approximation of the block state for any observables and sizes. Finally, we point out the role that entanglement plays in this scenario by showing that, in general, the thermodynamic paradigm of local intensive temperature applies whenever entanglement is not present in the system.

arXiv:1102.5710•Europhysics Letters (EPL)•Apr 1, 2012•31 citations

On the microscopic limit for the existence of local temperature

Michael J. Hartmann

Recent progress in the synthesis and processing of nano-structured materials and systems calls for an improved understanding of thermal properties on small length scales. In this context, the question whether thermodynamics and, in particular, the concept of temperature can apply on the nanoscale is of central interest. Here we consider a quantum system consisting of a regular chain of elementary subsystems with nearest neighbour interactions and assume that the total system is in a canonical state with temperature T. We analyse, under what condition the state factors into a product of canonical density matrices with respect to groups of n subsystems each, and when these groups have the same temperature T. In quantum systems the minimal group size depends on the temperature, contrary to the classical case. As examples, we apply our analysis to a harmonic chain and different types of Ising spin chains. For the harmonic chain, which successfully describes thermal properties of insulating solids, our approach gives a first quantitative estimate of the minimal length scale on which temperature can exist: This length scale is found to be constant for temperatures above the Debye temperature and proportional to 1/T^3 below. We finally apply the harmonic chain model to various materials of relevance for technical applications and discuss the results. These show that, indeed, high temperatures can exist quite locally, while low temperatures exist on larger scales only. The technique of the approach is based on a quantum central limit theorem, which should prove usefull in different settings, too.

•Jan 1, 2005•0 citations

Fundamentals of Nano-Thermodynamics

Michael J. Hartmann, G. Mahler, Ortwin G. Hess

Recent progress in the synthesis and processing of nano-structured materials and systems calls for an improved understanding of thermal properties on small length scales. In this context, the question whether thermodynamics and, in particular, the concept of temperature can apply on the nanoscale is of central interest. Here we consider a quantum system consisting of a regular chain of elementary subsystems with nearest neighbour interactions and assume that the total system is in a canonical state with temperature $T$. We analyse, under what condition the state factors into a product of canonical density matrices with respect to groups of $n$ subsystems each, and when these groups have the same temperature $T$. In quantum systems the minimal group size $n_{\textrm{min}}$ depends on the temperature $T$, contrary to the classical case. As examples, we apply our analysis to a harmonic chain and different types of Ising spin chains. For the harmonic chain, which successfully describes thermal properties of insulating solids, our approach gives a first quantitative estimate of the minimal length scale on which temperature can exist: This length scale is found to be constant for temperatures above the Debye temperature and proportional to $T^{-3}$ below. We finally apply the harmonic chain model to various materials of relevance for technical applications and discuss the results. These show that, indeed, high temperatures can exist quite locally, while low temperatures exist on larger scales only. This has striking consequences: In quasi 1-dimensional systems, like Carbon-Nanotubes, room temperatures (300 Kelvin) exist on length scales of 1 $μ$m, while very low temperatures (10 Kelvin) can only exist on scales larger than 1 mm.

arXiv:cond-mat/0408133•Aug 6, 2004•8 citations

Scaling behavior of interactions in a modular quantum system and the existence of local temperature

M Hartmann, J Gemmer, G Mahler +1 more

We consider a quantum system of fixed size consisting of a regular chain of n -level subsystems, where n is finite. Forming groups of N subsystems each, we show that the strength of interaction between the groups scales with N −1/2 . As a consequence, if the total system is in a thermal state with inverse temperature β, a sufficient condition for subgroups of size N to be approximately in a thermal state with the same temperature is √ N ≫ β Ē , where Ē is the width of the occupied level spectrum of the total system. These scaling properties indicate on what scale local temperatures may be meaningfully defined as intensive variables. This question is particularly relevant for non-equilibrium scenarios such as heat conduction, etc.

arXiv:quant-ph/0312158•Europhysics Letters (EPL)•Feb 17, 2004•15 citations
We consider blocks of quantum spins in a chain at thermal equilibrium, focusing on their properties from a thermodynamical perspective. In a classical system the temperature behaves as an intensive magnitude, above a certain block size, regardless of the actual value of the temperature itself. However, a deviation from this behavior is expected in quantum systems. In particular, we see that under some conditions the description of the blocks as thermal states with the same global temperature as the whole chain fails. We analyze this issue by employing the quantum fidelity as a figure of merit, singling out in detail the departure from the classical behavior. As it may be expected, we see that quantum features are more prominent at low temperatures and are affected by the presence of zero-temperature quantum phase transitions. Interestingly, we show that the blocks can be considered indeed as thermal states with a high fidelity, provided an effective local temperature is properly identified. Such a result may originate from typical properties of reduced subsystems of energy-constrained Hilbert spaces. Finally, the relation between local and global temperatures is analyzed as a function of the size of the blocks and the system parameters.
We consider a quantum system consisting of a regular chain of elementary subsystems with nearest neighbor interactions and assume that the total system is in a canonical state with temperature T . We analyze under what condition the state factors into a product of canonical density matrices with respect to groups of n subsystems each, and when these groups have the same temperature T. While in classical mechanics the validity of this procedure only depends on the size of the groups n, in quantum mechanics the minimum group size n(min) also depends on the temperature T! As examples, we apply our analysis to a harmonic chain and different types of Ising spin chains. We discuss various features that show up due to the characteristics of the models considered. For the harmonic chain, which successfully describes thermal properties of insulating solids, our approach gives a quantitative estimate of the minimal length scale on which temperature can exist: This length scale is found to be constant for temperatures above the Debye temperature and proportional to T-3 below.
Abstract While temperature is well understood as an intensive quantity in standard thermodynamics, it is less clear whether the same holds in quantum systems displaying correlations with no classical analogue. The problem lies in the fact that, under the presence of non-classical correlations, subsystems of a system in thermal equilibrium are, in general, not described by a thermal state at the same temperature as the global system and thus one cannot simply assign a local temperature to them. However, there have been identified situations in which correlations in thermal states decay sufficiently fast so that the state of their subsystems can be very well approximated by the reduced states of equilibrium systems that are only slightly bigger than the subsystems themselves, hence allowing for a valid local definition of temperature. In this work, we address the question of whether temperature is locally well defined for a bosonic system with local interactions that undergoes a phase transition at non-zero temperature. We consider a three-dimensional bosonic model in the grand canonical state and verify that a certain form of locality of temperature holds regardless of the temperature, and despite the presence of infinite-range correlations at and below the critical temperature of the phase transition.
We consider the concept of temperature in a setting beyond the standard thermodynamics prescriptions. Namely, rather than restricting to standard coarse-grained measurements, we consider observers able to master any possible quantum measurement —a scenario that might be relevant at nanoscopic scales. In this setting, we focus on quantum systems of coupled harmonic oscillators and study the question of whether the temperature is an intensive quantity, in the sense that a block of a thermal state can be approximated by an effective thermal state at the same temperature as the whole system. Using the quantum fidelity as figure of merit, we identify instances in which this approximation is not valid, as the block state and the reference thermal state are distinguishable for refined measurements. Actually, there are situations in which this distinguishability even increases with the block size. However, we also show that the two states do become less distinguishable with the block size for coarse-grained measurements —thus recovering the standard picture. We then go further and construct an effective thermal state which provides a good approximation of the block state for any observables and sizes. Finally, we point out the role that entanglement plays in this scenario by showing that, in general, the thermodynamic paradigm of local intensive temperature applies whenever entanglement is not present in the system.
Recent progress in the synthesis and processing of nano-structured materials and systems calls for an improved understanding of thermal properties on small length scales. In this context, the question whether thermodynamics and, in particular, the concept of temperature can apply on the nanoscale is of central interest. Here we consider a quantum system consisting of a regular chain of elementary subsystems with nearest neighbour interactions and assume that the total system is in a canonical state with temperature T. We analyse, under what condition the state factors into a product of canonical density matrices with respect to groups of n subsystems each, and when these groups have the same temperature T. In quantum systems the minimal group size depends on the temperature, contrary to the classical case. As examples, we apply our analysis to a harmonic chain and different types of Ising spin chains. For the harmonic chain, which successfully describes thermal properties of insulating solids, our approach gives a first quantitative estimate of the minimal length scale on which temperature can exist: This length scale is found to be constant for temperatures above the Debye temperature and proportional to 1/T^3 below. We finally apply the harmonic chain model to various materials of relevance for technical applications and discuss the results. These show that, indeed, high temperatures can exist quite locally, while low temperatures exist on larger scales only. The technique of the approach is based on a quantum central limit theorem, which should prove usefull in different settings, too.
Recent progress in the synthesis and processing of nano-structured materials and systems calls for an improved understanding of thermal properties on small length scales. In this context, the question whether thermodynamics and, in particular, the concept of temperature can apply on the nanoscale is of central interest. Here we consider a quantum system consisting of a regular chain of elementary subsystems with nearest neighbour interactions and assume that the total system is in a canonical state with temperature TTT. We analyse, under what condition the state factors into a product of canonical density matrices with respect to groups of nnn subsystems each, and when these groups have the same temperature TTT. In quantum systems the minimal group size nminn_{\textrm{min}}nmin​ depends on the temperature TTT, contrary to the classical case. As examples, we apply our analysis to a harmonic chain and different types of Ising spin chains. For the harmonic chain, which successfully describes thermal properties of insulating solids, our approach gives a first quantitative estimate of the minimal length scale on which temperature can exist: This length scale is found to be constant for temperatures above the Debye temperature and proportional to T−3T^{-3}T−3 below. We finally apply the harmonic chain model to various materials of relevance for technical applications and discuss the results. These show that, indeed, high temperatures can exist quite locally, while low temperatures exist on larger scales only. This has striking consequences: In quasi 1-dimensional systems, like Carbon-Nanotubes, room temperatures (300 Kelvin) exist on length scales of 1 μμμm, while very low temperatures (10 Kelvin) can only exist on scales larger than 1 mm.
We consider a quantum system of fixed size consisting of a regular chain of n -level subsystems, where n is finite. Forming groups of N subsystems each, we show that the strength of interaction between the groups scales with N −1/2 . As a consequence, if the total system is in a thermal state with inverse temperature β, a sufficient condition for subgroups of size N to be approximately in a thermal state with the same temperature is √ N ≫ β Ē , where Ē is the width of the occupied level spectrum of the total system. These scaling properties indicate on what scale local temperatures may be meaningfully defined as intensive variables. This question is particularly relevant for non-equilibrium scenarios such as heat conduction, etc.