We consider a class of quantum heat engines consisting of two subsystems interacting with a work-source and coupled to two separate baths at different temperatures Th>Tc. The purpose of the engine is to extract work due to the temperature difference. Its dynamics is not restricted to the near equilibrium regime. The engine structure is determined by maximizing the extracted work under various constraints. When this maximization is carried out at finite power, the engine dynamics is described by well-defined temperatures and satisfies the local version of the second law. In addition, its efficiency is bounded from below by the Curzon-Ahlborn value 1-radical Tc/Th and from above by the Carnot value 1-(Tc/Th). The latter is reached-at finite power--for a macroscopic engine, while the former is achieved in the equilibrium limit Th-->Tc . The efficiency that maximizes the power is strictly larger than the Curzon-Ahloborn value. When the work is maximized at a zero power, even a small (few-level) engine extracts work right at the Carnot efficiency.
We consider a class of quantum heat engines consisting of two subsystems interacting with a work-source and coupled to two separate baths at different temperatures Th>Tc. The purpose of the engine is to extract work due to the temperature difference. Its dynamics is not restricted to the near equilibrium regime. The engine structure is determined by maximizing the extracted work under various constraints. When this maximization is carried out at finite power, the engine dynamics is described by well-defined temperatures and satisfies the local version of the second law. In addition, its efficiency is bounded from below by the Curzon-Ahlborn value 1-radical Tc/Th and from above by the Carnot value 1-(Tc/Th). The latter is reached-at finite power--for a macroscopic engine, while the former is achieved in the equilibrium limit Th-->Tc . The efficiency that maximizes the power is strictly larger than the Curzon-Ahloborn value. When the work is maximized at a zero power, even a small (few-level) engine extracts work right at the Carnot efficiency.
We investigate the efficiency at maximum power (EMP) of irreversible quantum Carnot engines that perform finite-time cycles between two temperature tunable baths. The temperature form we adopt can be experimentally realized in squeezed baths in the high temperature limit, which makes our proposal of practical relevance. Focusing on low dissipation engines, we first generalize the pervious upper as well as lower bounds for the EMP to temperature tunable cases in which they are solely determined by a generalized Carnot limit. As an illustrative example, we then consider a minimal heat engine model with a two-level spin as the working medium. It mimics a low dissipation engine as confirmed by finite time thermodynamic optimization results. The so-obtained EMP, being constrained by the generalized bounds, is well described by a generalized Curzon- Ahlborn efficiency as consequences of a left/right symmetry for a rate constant and low dissipations. Intriguing features of this minimal heat engine under optimal power output are also demonstrated.
We study the efficiency at maximum power, ${\ensuremath{\eta}}_{m}$, of irreversible quantum Carnot engines (QCEs) that perform finite-time cycles between a hot and a cold reservoir at temperatures Th and Tc, respectively. For QCEs in the reversible limit (long cycle period, zero dissipation), ${\ensuremath{\eta}}_{m}$ becomes identical to the Carnot efficiency ${\ensuremath{\eta}}_{{}_{C}}=1\ensuremath{-}{T}_{c}/{T}_{h}$. For QCE cycles in which nonadiabatic dissipation and the time spent on two adiabats are included, the efficiency ${\ensuremath{\eta}}_{m}$ at maximum power output is bounded from above by ${\ensuremath{\eta}}_{{}_{C}}/(2\ensuremath{-}{\ensuremath{\eta}}_{{}_{C}})$ and from below by ${\ensuremath{\eta}}_{{}_{C}}/2$. In the case of symmetric dissipation, the Curzon-Ahlborn efficiency ${\ensuremath{\eta}}_{{}_{\mathit{CA}}}=1\ensuremath{-}\sqrt{{T}_{c}/{T}_{h}}$ is recovered under the condition that the time allocation between the adiabats and the contact time with the reservoir satisfy a certain relation.
The finite-time operation of a quantum-mechanical heat engine with a working fluid consisting of many noninteracting spin-1/2 systems is considered. The engine is driven by an external, time-dependent and nonrotating magnetic field. The cycle of operation consists of two adiabats and two isotherms. The analysis is based on the time derivatives of the first and second laws of thermodynamics. Explicit relations linking quantum observables to thermodynamic quantities are developed. The irreversible operation of this engine is studied in three cases: (1) The sudden limit, where the performance is found to be the same as that of the spin analog of the Otto cycle. This case provides the lower bound of efficiency. (2) The step-cycle operation scheme. Here, the optimization of power is carried out in the high-temperature limit (the ‘‘classical’’ limit). The results obtained are similar to those of Andresen et al. [Phys. Rev. A 15, 2086 (1977)]. (3) The Curzon–Ahlborn operation scheme. The semigroup approach is used to model the dynamics. Then the power production is optimized. All the results obtained for Newtonian engines operating by the same scheme, such as the Curzon–Ahlborn efficiency, apply in the high-temperature limit. These results are obtained without the additional assumption of proximity to thermal equilibrium, implicitly implied by the use of Newtonian heat conduction in the original derivation. It seems that the results of the Curzon–Ahlborn analysis are always obtained in the high-temperature limit, irrespective of the details of the model. The performance beyond the classical limit is optimized numerically. The classical approximation is found to be valid for most of the spin-polarization range. The deviations from the classical limit depend heavily upon the specific nature of both the working fluid and the heat baths and exhibit great diversity and complexity.
The finite time performance of quantum heat engines has been examined with emphasis on the classical, high temperature, limit. Two basic engine models were studied, differing by their consistency of working fluid: the harmonic engine, consisting of noninteracting harmonic oscillators, and the spin-j engine, consisting of noninteracting spin-j subsystems. The two models represent two distinct types of engines, with bounded vs unbounded Hamiltonians, and with creation and annihilation operators of the Fermionic vs the Bosonic type. The analysis is based on the time derivatives of the first and second laws of thermodynamics. Explicit relations linking quantum observables to thermodynamic quantities are utilized. The dynamics of the engines was modeled by the semigroup approach. The engines were optimized with respect to various target functions: power, entropy production, and efficiency, while subject to finite cycle duration. The main strategy of optimization was based on the Euler–Lagrange equation, and is similar to that previously applied by Salamon and Nitzan for the investigation of Newtonian engines [J. Chem. Phys. 74, 3546 (1981)]. The optimal cycles obtained at the classical limit are not of the Curzon–Ahlborn type, i.e., the internal temperature along the thermal branches is not constant. This result is in conflict with Newtonian thermodynamics, where the optimal cycles are of the Curzon–Ahlborn type. Nonetheless, some of the main features of Newtonian thermodynamics, such as the Curzon–Ahlborn efficiency at maximum power, are reproduced at the classical limit. This makes it possible to establish a ‘‘thermodynamic correspondence principle.’’ This principle asserts that the phenomenological Newtonian thermodynamic approach provides an asymptote of a theory based upon the more fundamental semigroup quantum approach. It is argued that the asymptotic nature of Newtonian thermodynamics is twofold since its validity is restricted by two demands: that of high temperatures and that of proximity to equilibrium.
Heat engines constitute the major building blocks of modern technologies. However, conventional heat engines with higher power yield lesser efficiency and vice versa and respect various power-efficiency trade-off relations. This is also assumed to be true for the engines operating in the quantum regime. Here we show that these relations are not fundamental. We introduce quantum heat engines that deliver maximum power with Carnot efficiency in the one-shot finite-size regime. These engines are composed of working systems with a finite number of quantum particles and are restricted to one-shot measurements. The engines operate in a one-step cycle by letting the working system simultaneously interact with hot and cold baths via semilocal thermal operations. By allowing quantum entanglement between its constituents and, thereby, a coherent transfer of heat from hot to cold baths, the engine implements the fastest possible reversible state transformation in each cycle, resulting in maximum power and Carnot efficiency. Finally, we propose a physically realizable engine using quantum optical systems.
Sadi Carnot's theorem regarding the maximum efficiency of heat engines is considered to be of fundamental importance in thermodynamics. This theorem famously states that the maximum efficiency depends only on the temperature of the heat baths used by the engine, but not on the specific structure of baths. Here, we show that when the heat baths are finite in size, and when the engine operates in the quantum nanoregime, a revision to this statement is required. We show that one may still achieve the Carnot efficiency, when certain conditions on the bath structure are satisfied; however if that is not the case, then the maximum achievable efficiency can reduce to a value which is strictly less than Carnot. We derive the maximum efficiency for the case when one of the baths is composed of qubits. Furthermore, we show that the maximum efficiency is determined by either the standard second law of thermodynamics, analogously to the macroscopic case, or by the non increase of the max relative entropy, which is a quantity previously associated with the single shot regime in many quantum protocols. This relative entropic quantity emerges as a consequence of additional constraints, called generalized free energies, that govern thermodynamical transitions in the nanoregime. Our findings imply that in order to maximize efficiency, further considerations in choosing bath Hamiltonians should be made, when explicitly constructing quantum heat engines in the future. This understanding of thermodynamics has implications for nanoscale engineering aiming to construct small thermal machines.